N. M. Karashchuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
N. M. Karashchuk has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- В’яЧеслав Пилипович Манойлов
Державний університет «Житомирська політехніка
4 shared publications Владислав Вікторович Чухов
Державний університет «Житомирська політехніка
2 shared publications- Володимир Борисович Ревенко
Житомирський військовий інститут імені С. П. Корольова
2 shared publications Наталія Миколаївна Каращук
Житомирський військовий інститут імені С. П. Корольова
2 shared publications- Петро Петрович Мартинчук
Державний університет «Житомирська політехніка
2 shared publications D. V. Koval
Житомирський військовий інститут імені С. П. Корольова
1 shared publication
Latest Publications
- Open Access
- 30 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 99,p. 35-40
Extending the Method for Development of Double-Loop Continuous Tracking Systems to Discrete Equivalents
Solutions to increase the accuracy of radio systems are analyzed. It is shown that invariance in a single-loop automatic control system affects its stability. Article [13] offers to apply a method for the synthesis of continuous high precision double-loop automatic control systems which are equivalent to combined systems in conditions when some values (entry useful action) can't be measured for development of tracking systems (in particular, radio systems, where the entry useful action can't be measured, and therefore combined control is impossible). The article considers extension of the method for the synthesis of double-loop automatic control systems to discrete systems equivalent to combined systems in an environment with simultaneous entry useful (preset) action and external disturbances and interferences. The developed method makes it possible to synthesize discrete high-precision automatic control tracking systems equivalent to combined ones in an environment with a controlled variable (entry useful action) which cannot be measured. A discrete transfer function from an error in double-loop system (5), an invariance condition (6), and a characteristic equation (8) are obtained. In this case, the numerator polynomial of the transfer function from error must have a difference of polynomials. The article demonstrates that invariance conditions (improved accuracy) can be achieved without any destabilization in the first loop. In this discrete tracking system equivalence to combined systems is achieved by two control loops and not by three loops as in the differential coupling method. A double-loop discrete automatic control system equivalent to a combined system was synthesized. A stochastic regulator was calculated and made, and the influence of this regulator on the astatism of the system (that is, on its accuracy) was analyzed. The proposed method can be used to develop discrete tracking systems (especially radio systems, where entry useful action cannot be measured due to interference), and it can be applied for laser radar tracking systems, and control systems for aircraft of various purposes.
- 30 March 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 99,p. 35-40
Open AccessExtending the Method for Development of Double-Loop Continuous Tracking Systems to Discrete Equivalents
Solutions to increase the accuracy of radio systems are analyzed. It is shown that invariance in a single-loop automatic control system affects its stability. Article [13] offers to apply a method for the synthesis of continuous high precision double-loop automatic control systems which are equivalent to combined systems in conditions when some values (entry useful action) can't be measured for development of tracking systems (in particular, radio systems, where the entry useful action can't be measured, and therefore combined control is impossible). The article considers extension of the method for the synthesis of double-loop automatic control systems to discrete systems equivalent to combined systems in an environment with simultaneous entry useful (preset) action and external disturbances and interferences. The developed method makes it possible to synthesize discrete high-precision automatic control tracking systems equivalent to combined ones in an environment with a controlled variable (entry useful action) which cannot be measured. A discrete transfer function from an error in double-loop system (5), an invariance condition (6), and a characteristic equation (8) are obtained. In this case, the numerator polynomial of the transfer function from error must have a difference of polynomials. The article demonstrates that invariance conditions (improved accuracy) can be achieved without any destabilization in the first loop. In this discrete tracking system equivalence to combined systems is achieved by two control loops and not by three loops as in the differential coupling method. A double-loop discrete automatic control system equivalent to a combined system was synthesized. A stochastic regulator was calculated and made, and the influence of this regulator on the astatism of the system (that is, on its accuracy) was analyzed. The proposed method can be used to develop discrete tracking systems (especially radio systems, where entry useful action cannot be measured due to interference), and it can be applied for laser radar tracking systems, and control systems for aircraft of various purposes.
- Open Access
- 8 August 2024
- Published by Korolov Zhytomyr Military Institute in PROBLEMS OF CONSTRUCTION, TESTING, APPLICATION AND OPERATION OF COMPLEX INFORMATION SYSTEMS
- Vol. 1 (26 (I)) , 81-92
ANALYTICAL STUDY OF THE INFLUENCE OF THE RADIATION OF HIGH-VOLTAGE POWER LINES ON THE FORMATION OF HARMONIC RADIATION IN THE IONOSPHERE
The influence of radiation from high-voltage power lines on the mechanism of harmonic radiation formation in the ionosphere is studied partially and qualitatively by analytical method on the basis of theories of the electromagnetic field, antennas, and propagation of electromagnetic waves in the atmosphere. This made it possible to interpret the frequency features of the observed spectra registered by the Earth's artificial satellites. The impact of radiation from high-voltage power lines is becoming significant due to the growing level of electricity production and use by powerful electricity consumers, which generate man-made signals at frequencies related to the frequency of the power grid and its numerous harmonics, causing changes in the parameters of the plasma and electromagnetic field in the ionosphere. High-voltage power lines are considered as an antenna system consisting of radiators equivalent to horizontal elementary electric vibrators raised by means of supports above the earth's surface. In the first approximation, the Earth and the atmosphere are described as a spherically layered medium whose electrical parameters depend only on the height to a smooth spherical surface. The components of the electric field intensity amplitude of an elementary electric vibrator in the near-field have been calculated by the analytical method, which proves a very low radiation power. In the far zone, the calculated radiation power is 150.63 kW due to the supply current of 2.93 kA, since the electrical size of such antenna is very small. The determined amplitude of the electric field strength in the ionosphere, taking into account the attenuation depending on the height of the layer, varies from 0.301 mV/m to 6.01 mV/m for altitudes from 100 km to 500 km. The obtained results do not contradict previously measured values.
- 8 August 2024
- Published by Korolov Zhytomyr Military Institute in PROBLEMS OF CONSTRUCTION, TESTING, APPLICATION AND OPERATION OF COMPLEX INFORMATION SYSTEMS
- Vol. 1 (26 (I)) , 81-92
Open AccessANALYTICAL STUDY OF THE INFLUENCE OF THE RADIATION OF HIGH-VOLTAGE POWER LINES ON THE FORMATION OF HARMONIC RADIATION IN THE IONOSPHERE
The influence of radiation from high-voltage power lines on the mechanism of harmonic radiation formation in the ionosphere is studied partially and qualitatively by analytical method on the basis of theories of the electromagnetic field, antennas, and propagation of electromagnetic waves in the atmosphere. This made it possible to interpret the frequency features of the observed spectra registered by the Earth's artificial satellites. The impact of radiation from high-voltage power lines is becoming significant due to the growing level of electricity production and use by powerful electricity consumers, which generate man-made signals at frequencies related to the frequency of the power grid and its numerous harmonics, causing changes in the parameters of the plasma and electromagnetic field in the ionosphere. High-voltage power lines are considered as an antenna system consisting of radiators equivalent to horizontal elementary electric vibrators raised by means of supports above the earth's surface. In the first approximation, the Earth and the atmosphere are described as a spherically layered medium whose electrical parameters depend only on the height to a smooth spherical surface. The components of the electric field intensity amplitude of an elementary electric vibrator in the near-field have been calculated by the analytical method, which proves a very low radiation power. In the far zone, the calculated radiation power is 150.63 kW due to the supply current of 2.93 kA, since the electrical size of such antenna is very small. The determined amplitude of the electric field strength in the ionosphere, taking into account the attenuation depending on the height of the layer, varies from 0.301 mV/m to 6.01 mV/m for altitudes from 100 km to 500 km. The obtained results do not contradict previously measured values.
- Open Access
- 17 July 2024
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(93),p. 272-277
Кут конуса дискоконусної антени: теорія та практика
При розрахунку розмірів дискоконусної антени цікавим моментом є вибір кута конуса. Як оптимальне зазвичай пропонується значення цього кута у 30 градусів. Аргументація на користь такого вибору практично не наводиться. У роботі проведено теоретичні та експериментальні дослідження впливу кута конуса на вхідний опір дискоконусної антени. Показано, що на підставі цього у значній частці публікацій щодо вибору значення кута конуса зазвичай вказують інтервали від 20 до 40 градусів, а як найкраще пропонує значення цього кута у 30 градусів. Це випливає з того, що саме за таких значень легко забезпечити вхідний опір такої антени 50 Ом, тобто напряму підключати її до коаксіального кабелю з хвилевим опором у 50 Ом. Це підтверджено експериментально, тобто, що кут конуса, близький до 30 градусів, дозволяє отримати значення вхідного опору, максимально близьке до 50 Ом. Також показано, що при значенні КСХН на рівні 2 можливий інтервал значень кута конуса становить орієнтовно від 17 до 37 градусів, а при рівні 1,5 – від 23 до 34 градусів.
- 17 July 2024
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(93),p. 272-277
Open AccessКут конуса дискоконусної антени: теорія та практика
При розрахунку розмірів дискоконусної антени цікавим моментом є вибір кута конуса. Як оптимальне зазвичай пропонується значення цього кута у 30 градусів. Аргументація на користь такого вибору практично не наводиться. У роботі проведено теоретичні та експериментальні дослідження впливу кута конуса на вхідний опір дискоконусної антени. Показано, що на підставі цього у значній частці публікацій щодо вибору значення кута конуса зазвичай вказують інтервали від 20 до 40 градусів, а як найкраще пропонує значення цього кута у 30 градусів. Це випливає з того, що саме за таких значень легко забезпечити вхідний опір такої антени 50 Ом, тобто напряму підключати її до коаксіального кабелю з хвилевим опором у 50 Ом. Це підтверджено експериментально, тобто, що кут конуса, близький до 30 градусів, дозволяє отримати значення вхідного опору, максимально близьке до 50 Ом. Також показано, що при значенні КСХН на рівні 2 можливий інтервал значень кута конуса становить орієнтовно від 17 до 37 градусів, а при рівні 1,5 – від 23 до 34 градусів.
- Open Access
- 30 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 90,p. 5-12
Experimental Study of Antenna Patterns for On-board Antennas with Extremely Narrow Radiation Patterns
The publication presents the results of an experimental study of antenna pattern (AP) for a slit cut in a rectangular waveguide with a cross section of 23 х 10 mm, which was excited by a pin in E- and H- planes at a frequency of 10 GHz. It was experimentally discovered that AP width in the E- plane was 84°. The AP level decreased to 20% in the directions ±90°. AP had a width of 54° in the H-plane. The AP level decreased to 5% in the directions ±90°. The experimental AP obtained in the E- and H- planes were consistent with the theoretically calculated ones, while the discrepancy did not exceed 7%. The publication includes as well the results of AP experimental study for a slit cut in a rectangular waveguide with a cross section of 23 х 10 mm, which was excited by a pin in E- and H- planes at a frequency of 7 GHz. Fluoroplastic plates (fluoroplast F4) were inserted into a rectangular waveguide near narrow walls, which sizes were: 79×10×2 mm (L×W×H) with a relative dielectric constant εr = 2. It was experimentally discovered that AP width was 72° in the E- plane, AP level decreased to 25% in the directions ±90°. For the H-plane 43°, AP level decreased to 7% in the directions ±90°. Partial loading with dielectric material when used in a rectangular waveguide makes it possible to reduce its geometrical sizes without changing the electrical ones.The research results can be applied to design and develop on-board antennas with extremely narrow radiation patterns used for centimeter wavelength radio channels.
- 30 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 90,p. 5-12
Open AccessExperimental Study of Antenna Patterns for On-board Antennas with Extremely Narrow Radiation Patterns
The publication presents the results of an experimental study of antenna pattern (AP) for a slit cut in a rectangular waveguide with a cross section of 23 х 10 mm, which was excited by a pin in E- and H- planes at a frequency of 10 GHz. It was experimentally discovered that AP width in the E- plane was 84°. The AP level decreased to 20% in the directions ±90°. AP had a width of 54° in the H-plane. The AP level decreased to 5% in the directions ±90°. The experimental AP obtained in the E- and H- planes were consistent with the theoretically calculated ones, while the discrepancy did not exceed 7%. The publication includes as well the results of AP experimental study for a slit cut in a rectangular waveguide with a cross section of 23 х 10 mm, which was excited by a pin in E- and H- planes at a frequency of 7 GHz. Fluoroplastic plates (fluoroplast F4) were inserted into a rectangular waveguide near narrow walls, which sizes were: 79×10×2 mm (L×W×H) with a relative dielectric constant εr = 2. It was experimentally discovered that AP width was 72° in the E- plane, AP level decreased to 25% in the directions ±90°. For the H-plane 43°, AP level decreased to 7% in the directions ±90°. Partial loading with dielectric material when used in a rectangular waveguide makes it possible to reduce its geometrical sizes without changing the electrical ones.The research results can be applied to design and develop on-board antennas with extremely narrow radiation patterns used for centimeter wavelength radio channels.
- Open Access
- 30 June 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 88,p. 69-76
Experimental Study of the Effect of Partial Dielectric Filling on Electrodynamic Characteristics and Rectangular Waveguide Dimensions
The results of an experimental study of the effect of partial dielectric filling (PDF) on the electrodynamic characteristics and dimensions of a rectangular waveguide are presented. The results of the experimental study are compared with the calculated ones obtained using an approximate method for determining the effective permittivity and propagation constant of a partially filled waveguide (PWF) presented in [1]. The approximate method differs from the existing ones in that it is not necessary to solve transcendental dispersion equations to determine the propagation constant in a rectangular waveguide with a PDF. In particular, the results of a theoretical calculation of the dependences of the size of the wide wall of the PWF with cross-sectional dimensions of 23 × 10 mm on the change in the fill factor along the wide wall of the waveguide at a frequency of 10 GHz, the wavelength, the wave impedance of the PWF, and the propagation constant on the change in the fill factor along the wide wall, waveguide in the frequency band 6–14 GHz for modification 2–1–2 (thin dielectric plates near the side walls) and 1–2 (thin dielectric plate near one side wall) for the H10 type wave are presented. Experimental studies were carried out using a laboratory setup consisting of a signal generator, a voltage ratio meter, a measuring line based on a rectangular waveguide, to the output of which a short circuit was connected. Dielectric plates (PTFE Ф4) 10 mm wide, 2 mm and 4 mm thick, and 253 mm long were installed inside the rectangular waveguide of the measuring line. The maximum relative error of the results of experimental studies for modifications 2-1-2, 1-2 does not exceed 15%, in particular, for modification 2-1-2 it is less than for 1-2. The presented results confirm the feasibility and high accuracy of calculating the electrodynamic characteristics of the PWF by the approximate method [1]. The reliability and validity of the results obtained is ensured by a sufficiently high convergence of the calculation results with the experimental ones, under boundary conditions with known results, the convergence of the obtained formulas in units of measurement.
- 30 June 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 88,p. 69-76
Open AccessExperimental Study of the Effect of Partial Dielectric Filling on Electrodynamic Characteristics and Rectangular Waveguide Dimensions
The results of an experimental study of the effect of partial dielectric filling (PDF) on the electrodynamic characteristics and dimensions of a rectangular waveguide are presented. The results of the experimental study are compared with the calculated ones obtained using an approximate method for determining the effective permittivity and propagation constant of a partially filled waveguide (PWF) presented in [1]. The approximate method differs from the existing ones in that it is not necessary to solve transcendental dispersion equations to determine the propagation constant in a rectangular waveguide with a PDF. In particular, the results of a theoretical calculation of the dependences of the size of the wide wall of the PWF with cross-sectional dimensions of 23 × 10 mm on the change in the fill factor along the wide wall of the waveguide at a frequency of 10 GHz, the wavelength, the wave impedance of the PWF, and the propagation constant on the change in the fill factor along the wide wall, waveguide in the frequency band 6–14 GHz for modification 2–1–2 (thin dielectric plates near the side walls) and 1–2 (thin dielectric plate near one side wall) for the H10 type wave are presented. Experimental studies were carried out using a laboratory setup consisting of a signal generator, a voltage ratio meter, a measuring line based on a rectangular waveguide, to the output of which a short circuit was connected. Dielectric plates (PTFE Ф4) 10 mm wide, 2 mm and 4 mm thick, and 253 mm long were installed inside the rectangular waveguide of the measuring line. The maximum relative error of the results of experimental studies for modifications 2-1-2, 1-2 does not exceed 15%, in particular, for modification 2-1-2 it is less than for 1-2. The presented results confirm the feasibility and high accuracy of calculating the electrodynamic characteristics of the PWF by the approximate method [1]. The reliability and validity of the results obtained is ensured by a sufficiently high convergence of the calculation results with the experimental ones, under boundary conditions with known results, the convergence of the obtained formulas in units of measurement.
- Open Access
- 30 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 87,p. 30-38
Synthesis Method of High Precision Servo-Systems
The method for synthesis of servo-systems, equivalent to combined ones, in the conditions of the simultaneous presence of both immeasurable input setting action and external disturbances and noises is presented in this paper. The paper offers the solution to the control problem within the framework of two-loop systems, equivalent to combined systems (Fig. 2), in which the first block of the second loop carries out the operation of extracting X from an error signal ɛк according to expression (5), the transfer function of the second controller is given by expression (6), the third block performs inversion of a transfer function (TF) WОy (p).The characteristic polynomial of a two-loop automatic control system (ACS) has the form (7), which excludes the effect of the second loop on the stability of the first one. The polynomial of the numerator of the error transfer function must have the difference of the polynomials, which leads to the achievement of invariance. In accordance with these requirements, the invariance condition and the characteristic equation have the form (16) and (17).The double-loop servo-system which has an error transfer function with the form (20) is equivalent to a combined one, since it provides: the invariance of the error with respect to the setting action without its direct measurement; stability of the first circuit with a stable second circuit. With this construction of the ACS, the equivalence to the combined systems, in contrast to the method of differential constraints, is achieved by two control loops instead of three ones.The double-loop ACS is synthesized that is equivalent to a combined one, which at the same time implements the requirement — an increase in ACS astatism by one unit.It is advisable to apply the proposed method to the construction of servo-systems (especially radio engineering, where the input useful effect is not measurable), as well as in control systems of aircraft for various purposes.
- 30 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 87,p. 30-38
Open AccessSynthesis Method of High Precision Servo-Systems
The method for synthesis of servo-systems, equivalent to combined ones, in the conditions of the simultaneous presence of both immeasurable input setting action and external disturbances and noises is presented in this paper. The paper offers the solution to the control problem within the framework of two-loop systems, equivalent to combined systems (Fig. 2), in which the first block of the second loop carries out the operation of extracting X from an error signal ɛк according to expression (5), the transfer function of the second controller is given by expression (6), the third block performs inversion of a transfer function (TF) WОy (p).The characteristic polynomial of a two-loop automatic control system (ACS) has the form (7), which excludes the effect of the second loop on the stability of the first one. The polynomial of the numerator of the error transfer function must have the difference of the polynomials, which leads to the achievement of invariance. In accordance with these requirements, the invariance condition and the characteristic equation have the form (16) and (17).The double-loop servo-system which has an error transfer function with the form (20) is equivalent to a combined one, since it provides: the invariance of the error with respect to the setting action without its direct measurement; stability of the first circuit with a stable second circuit. With this construction of the ACS, the equivalence to the combined systems, in contrast to the method of differential constraints, is achieved by two control loops instead of three ones.The double-loop ACS is synthesized that is equivalent to a combined one, which at the same time implements the requirement — an increase in ACS astatism by one unit.It is advisable to apply the proposed method to the construction of servo-systems (especially radio engineering, where the input useful effect is not measurable), as well as in control systems of aircraft for various purposes.
- Open Access
- 30 November 2021
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 2(88),p. 103-112
Вимірювання добротності НВЧ-резонаторів за допомогою мостового методу
Для вимірювання параметрів НВЧ-резонаторів зазвичай застосовуються різноманітні методи, у яких використовують різні хвилеводні елементи, такі як спрямовані відгалужувачі або різні гібридні з’єднання. У роботі розглядаються основні схеми вмикання об’ємних металевих резонаторів у лінії передачі та їхні параметри. Використовувані методи вимірювання параметрів резонаторів мають велику трудомісткість настроювання та низьку точність. Мостові методи із використанням Т-трійника мають кращу точність вимірювань, проте їхнім недоліком є використання підстроювальних елементів у вигляді штирів чи діафрагм для балансування мостової схеми, що призводить до збільшення тривалості вимірювання. У роботі розглянуто метод вимірювання параметрів добротності НВЧ-резонаторів з використанням неузгодженого Т-мосту, який не має наведених вище недоліків. Описано методику вимірювань та запропоновано автоматичну установку із застосуванням ПЕОМ. За експериментальними даними способом графічної побудови на круговій діаграмі можна визначити всі основні параметри резонаторів. Також наведено формули для оцінки похибки вимірювання параметрів резонаторів.
- 30 November 2021
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 2(88),p. 103-112
Open AccessВимірювання добротності НВЧ-резонаторів за допомогою мостового методу
Для вимірювання параметрів НВЧ-резонаторів зазвичай застосовуються різноманітні методи, у яких використовують різні хвилеводні елементи, такі як спрямовані відгалужувачі або різні гібридні з’єднання. У роботі розглядаються основні схеми вмикання об’ємних металевих резонаторів у лінії передачі та їхні параметри. Використовувані методи вимірювання параметрів резонаторів мають велику трудомісткість настроювання та низьку точність. Мостові методи із використанням Т-трійника мають кращу точність вимірювань, проте їхнім недоліком є використання підстроювальних елементів у вигляді штирів чи діафрагм для балансування мостової схеми, що призводить до збільшення тривалості вимірювання. У роботі розглянуто метод вимірювання параметрів добротності НВЧ-резонаторів з використанням неузгодженого Т-мосту, який не має наведених вище недоліків. Описано методику вимірювань та запропоновано автоматичну установку із застосуванням ПЕОМ. За експериментальними даними способом графічної побудови на круговій діаграмі можна визначити всі основні параметри резонаторів. Також наведено формули для оцінки похибки вимірювання параметрів резонаторів.
- Open Access
- 30 September 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 86,p. 29-38
Research of Dispersion Characteristics of a Rectangular Waveguide with a Corrugated Bottom Wall by the Coupled Wave Method
The research on dispersive characteristics of a rectangular waveguide with the goffered bottom wall a method of the connected waves is presented.Rectangular and round waveguides with the goffered walls usually are used in a superhigh-frequency range as band-pass and low-pass filters, irradiators of multiband mirror aerials of satellite communication; in radar-tracking gauges of a W-range for detection and creation of cards of space garbage, etc. Definition of a constant of distribution in a rectangular waveguide with the goffered bottom wall by the method of the connected waves is conducted by transformation of the homogeneous differential equation with non-uniform boundary conditions to the non-uniform differential equation with homogeneous boundary conditions. The electromagnetic field in the cells of the corrugation of a rectangular waveguide with a corrugated bottom wall is found through the vector potential, which depends on the radial coordinate. The function of changing the electromagnetic field along the radial coordinate is determined by solving the Bessel equation. The vector of the magnetic field strength and the amplitudes of the components of the magnetic field strengths in the cross section of a rectangular waveguide and the component of the electric field strength tangential to the cell surface are found through the vector potential. The tangential component of the electric field strength along the narrow walls of a rectangular waveguide is calculated. An equivalent magnetic surface current is introduced along the wide and narrow walls of a rectangular waveguide. For a regular rectangular waveguide with magnetic currents on its walls, solutions of equations that satisfy the orthogonality conditions, for determining the amplitudes of electromagnetic fields in the positive and negative directions along the axis of the regular rectangular waveguide, correction to the wave propagation constant of the i-th k'j type is given. The graphs of the calculated and experimental dependences of the propagation constant k'j on the ratio λ/a (λ - wavelength, m) for waves of quasi types H10, H20, and H01 in a WR-112 rectangular waveguide with cross-sectional dimensions (a x b) mm = (28,5 x 12,64) mm with a corrugated bottom wall at fixed relative dimensions of the cell depth t, the distance between the corrugations s and the width of the lower base of the trapezoid of the cross-section of the corrugation D — δ=t/a, u=s/a, and p=D/a. The dependences of the propagation constant k'j on the ratio λ/a for a quasi-type wave H10 were studied in the frequency range from 5.2 GHz to 7.1 GHz, for a quasi-type wave H20 - from 10.5 GHz to 11.8 GHz, for a quasi-type wave H01 - from 11.7 GHz up to 18.1 GHz. The dispersion characteristics of waves of the types of quasi H10, H20, and H01 a rectangular waveguide with a corrugated bottom wall with a decrease in the relative depth of the corrugation δ approach the dispersion characteristics of the types of waves of a regular rectangular waveguide and, in the case of the boundary (δ→0), coincide with them. The error of the calculated data relative to the experimental data is about 5%, which confirms the suitability of the proposed method for practical calculations even in the first approximation.The proposed technique may be appropriate for choosing the approximation that provides the required calculation accuracy in practice with a minimum amount of computation.The reliability and validity of the results obtained is ensured by the convergence of the results of the calculation according to the boundary conditions with the known results and the convergence of the formulas obtained by the units of measurement.
- 30 September 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 86,p. 29-38
Open AccessResearch of Dispersion Characteristics of a Rectangular Waveguide with a Corrugated Bottom Wall by the Coupled Wave Method
The research on dispersive characteristics of a rectangular waveguide with the goffered bottom wall a method of the connected waves is presented.Rectangular and round waveguides with the goffered walls usually are used in a superhigh-frequency range as band-pass and low-pass filters, irradiators of multiband mirror aerials of satellite communication; in radar-tracking gauges of a W-range for detection and creation of cards of space garbage, etc. Definition of a constant of distribution in a rectangular waveguide with the goffered bottom wall by the method of the connected waves is conducted by transformation of the homogeneous differential equation with non-uniform boundary conditions to the non-uniform differential equation with homogeneous boundary conditions. The electromagnetic field in the cells of the corrugation of a rectangular waveguide with a corrugated bottom wall is found through the vector potential, which depends on the radial coordinate. The function of changing the electromagnetic field along the radial coordinate is determined by solving the Bessel equation. The vector of the magnetic field strength and the amplitudes of the components of the magnetic field strengths in the cross section of a rectangular waveguide and the component of the electric field strength tangential to the cell surface are found through the vector potential. The tangential component of the electric field strength along the narrow walls of a rectangular waveguide is calculated. An equivalent magnetic surface current is introduced along the wide and narrow walls of a rectangular waveguide. For a regular rectangular waveguide with magnetic currents on its walls, solutions of equations that satisfy the orthogonality conditions, for determining the amplitudes of electromagnetic fields in the positive and negative directions along the axis of the regular rectangular waveguide, correction to the wave propagation constant of the i-th k'j type is given. The graphs of the calculated and experimental dependences of the propagation constant k'j on the ratio λ/a (λ - wavelength, m) for waves of quasi types H10, H20, and H01 in a WR-112 rectangular waveguide with cross-sectional dimensions (a x b) mm = (28,5 x 12,64) mm with a corrugated bottom wall at fixed relative dimensions of the cell depth t, the distance between the corrugations s and the width of the lower base of the trapezoid of the cross-section of the corrugation D — δ=t/a, u=s/a, and p=D/a. The dependences of the propagation constant k'j on the ratio λ/a for a quasi-type wave H10 were studied in the frequency range from 5.2 GHz to 7.1 GHz, for a quasi-type wave H20 - from 10.5 GHz to 11.8 GHz, for a quasi-type wave H01 - from 11.7 GHz up to 18.1 GHz. The dispersion characteristics of waves of the types of quasi H10, H20, and H01 a rectangular waveguide with a corrugated bottom wall with a decrease in the relative depth of the corrugation δ approach the dispersion characteristics of the types of waves of a regular rectangular waveguide and, in the case of the boundary (δ→0), coincide with them. The error of the calculated data relative to the experimental data is about 5%, which confirms the suitability of the proposed method for practical calculations even in the first approximation.The proposed technique may be appropriate for choosing the approximation that provides the required calculation accuracy in practice with a minimum amount of computation.The reliability and validity of the results obtained is ensured by the convergence of the results of the calculation according to the boundary conditions with the known results and the convergence of the formulas obtained by the units of measurement.
- Open Access
- 16 June 2021
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(87),p. 110-115
Широкосмугова антена у вигляді відрізка коаксіального хвилеводу
Антена у вигляді відкритого відрізка коаксіального хвилеводу в режимі хвилі типу широко використовується як самостійний випромінювач. Особливістю такої антени є її погане узгодження з вільним простором. Для покращення узгодження антени у вигляді відрізка коаксіального хвилеводу застосовано діелектричний чвертьхвильовий трансформатор. Отримано формули (1)–(5) для розрахунку параметрів діелектричного чвертьхвильового трансформатора та представлено експериментальні дані, які підтверджують розрахунки. А саме: активної (1) та реактивної (2) зовнішніх провідностей відкритого кінця коаксіальної лінії; коефіцієнта відбиття хвилі в коаксіальній лінії (4) і коефіцієнта корисної дії (5). У таблиці 1 наведено значення результатів розрахунків геометричних розмірів та місця включення виготовлених зразків діелектричних чвертьхвильових трансформаторів, що підтверджені експериментально. Наведено розраховані та експериментально зняті графіки зміни коефіцієнта стоячої хвилі за напругою (КСХН) у смузі частот для різних типів діелектричних чвертьхвильових трансформаторів та діаграм спрямованості антени різних розмірів.
- 16 June 2021
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(87),p. 110-115
Open AccessШирокосмугова антена у вигляді відрізка коаксіального хвилеводу
Антена у вигляді відкритого відрізка коаксіального хвилеводу в режимі хвилі типу широко використовується як самостійний випромінювач. Особливістю такої антени є її погане узгодження з вільним простором. Для покращення узгодження антени у вигляді відрізка коаксіального хвилеводу застосовано діелектричний чвертьхвильовий трансформатор. Отримано формули (1)–(5) для розрахунку параметрів діелектричного чвертьхвильового трансформатора та представлено експериментальні дані, які підтверджують розрахунки. А саме: активної (1) та реактивної (2) зовнішніх провідностей відкритого кінця коаксіальної лінії; коефіцієнта відбиття хвилі в коаксіальній лінії (4) і коефіцієнта корисної дії (5). У таблиці 1 наведено значення результатів розрахунків геометричних розмірів та місця включення виготовлених зразків діелектричних чвертьхвильових трансформаторів, що підтверджені експериментально. Наведено розраховані та експериментально зняті графіки зміни коефіцієнта стоячої хвилі за напругою (КСХН) у смузі частот для різних типів діелектричних чвертьхвильових трансформаторів та діаграм спрямованості антени різних розмірів.
- Open Access
- 15 January 2021
- Published by Korolov Zhytomyr Military Institute in PROBLEMS OF CONSTRUCTION, TESTING, APPLICATION AND OPERATION OF COMPLEX INFORMATION SYSTEMS
- No. 19,p. 42-50
ADVANCED METHOD OF ANTENNA CALCULATION FOR RADIO MONITORING SYSTEMS OF ON-BOARD RADIO SOURCES
Analysis of the experience of modern armed struggle shows that timely detection of signals onboard radio sources by radio monitoring systems is an important task. One way to ensure its solution is the use of compact broadband antennas in the centimeter range. Therefore the development and improvement of methods for calculating broadband compact antennas in the centimeter wave range is an important and relevant scientific and practical task. An improved method for calculating a traveling wave antenna based on irregular symmetrical slit lines located arranged on a multilayer dielectric substrate (Vivaldi antennas) is proposed, by taking into account the thickness of the dielectric substrate, the relative effective dielectric constant of the substrate layers and two-way power supply to improve the directional properties of the antenna and its coordination in a given frequency band. In particular, the formulas of the phase multiplier of the system (for two radiating elements) and the resulting pattern of the antenna take into account the two-way power supply and the thickness and relative dielectric constant of the substrate. These advanced formulas for calculating and selecting these options antennas, lengths; maximum and minimum slot width; the coefficient of opening the gap; the width of the strip of symmetrical microstrip power line at the connection of the coaxial power line; the width of the strip at the intersection with the slit line; the width of the symmetrical slit line at the base of the opening; the length of a quarter-wave transformer based on a symmetrical microstrip line; the length of the symmetric microstrip power line; slit length; resonator diameter; the radius of the cover of the structural capacitor. The practical significance of the results obtained lies in the possibility of an approximate calculation of compact broadband antennas in the centimeter wavelength range. The results make it possible to model and manufacture these antennas for radio monitoring systems for onboard radio sources.
- 15 January 2021
- Published by Korolov Zhytomyr Military Institute in PROBLEMS OF CONSTRUCTION, TESTING, APPLICATION AND OPERATION OF COMPLEX INFORMATION SYSTEMS
- No. 19,p. 42-50
Open AccessADVANCED METHOD OF ANTENNA CALCULATION FOR RADIO MONITORING SYSTEMS OF ON-BOARD RADIO SOURCES
Analysis of the experience of modern armed struggle shows that timely detection of signals onboard radio sources by radio monitoring systems is an important task. One way to ensure its solution is the use of compact broadband antennas in the centimeter range. Therefore the development and improvement of methods for calculating broadband compact antennas in the centimeter wave range is an important and relevant scientific and practical task. An improved method for calculating a traveling wave antenna based on irregular symmetrical slit lines located arranged on a multilayer dielectric substrate (Vivaldi antennas) is proposed, by taking into account the thickness of the dielectric substrate, the relative effective dielectric constant of the substrate layers and two-way power supply to improve the directional properties of the antenna and its coordination in a given frequency band. In particular, the formulas of the phase multiplier of the system (for two radiating elements) and the resulting pattern of the antenna take into account the two-way power supply and the thickness and relative dielectric constant of the substrate. These advanced formulas for calculating and selecting these options antennas, lengths; maximum and minimum slot width; the coefficient of opening the gap; the width of the strip of symmetrical microstrip power line at the connection of the coaxial power line; the width of the strip at the intersection with the slit line; the width of the symmetrical slit line at the base of the opening; the length of a quarter-wave transformer based on a symmetrical microstrip line; the length of the symmetric microstrip power line; slit length; resonator diameter; the radius of the cover of the structural capacitor. The practical significance of the results obtained lies in the possibility of an approximate calculation of compact broadband antennas in the centimeter wavelength range. The results make it possible to model and manufacture these antennas for radio monitoring systems for onboard radio sources.