Suresh Paramasivam
Research Subjects
Research Interests
Suresh Paramasivam has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Anish Jafrin Thilak Johnson
Department of Mechanical Engineering Mepco Schlenk Engineering College Sivakasi India
2 shared publications Anish Jafrin Thilak Johnson
Mepco Schlenk Engineering College
1 shared publication- Gopinath Varudharajan
Kongunadu College of Engineering and Technology, India
1 shared publication Gunasekaran Kandasamy
Muthayammal Engineering College (Autonomous), India
1 shared publication- Harikaran Madeswaran
Muthayammal Engineering College, India
1 shared publication - Kumaravel Sundaram
Kongunadu College of Engineering and Technology
1 shared publication
Latest Publications
- 19 November 2026
- Published by Wiley in Quality and Reliability Engineering International
Strategic Safety Management for Hazardous Machinery: Integrating Safety Certification Systems and Regulatory Compliance for Accident Prevention
The persistent incidence of machinery‐related accidents in hazardous industrial settings highlights the need to move beyond traditional compliance‐focused safety practices toward more resilient and outcome‐oriented safety management systems. Although certification standards and regulatory requirements are widely implemented, many organizations struggle to translate formal compliance into sustained operational safety, resulting in recurring accidents, near‐miss events, and unsafe work behaviors. Addressing this gap, the present study develops and empirically validates an integrated Strategic Safety Management framework that conceptualizes safety as a proactive, organization‐wide capability embedded in daily operations. The framework incorporates safety certification mechanisms, regulatory adherence, safety training effectiveness, and managerial safety leadership as key independent drivers of safety performance, while the reduction of machinery‐related accidents measured through accident frequency, accident severity, and near‐miss occurrences serves as the primary dependent variable. A distinctive contribution of this study lies in explicitly modeling behavioral and organizational mechanisms, wherein worker safety awareness, organizational safety culture, and monitoring and inspection practices are examined as moderating variables that influence the strength of the relationships between strategic safety initiatives and machinery‐related accident reduction. The study uses a mixed‐method design, drawing on data from 50 respondents across automotive manufacturing, heavy engineering, and process industries, supported by organizational safety records. Comparative analysis shows that organizations implementing integrated safety practices experience approximately 53% lower average accident rates than those relying on fragmented interventions. Furthermore, the predictive classification model achieves an accuracy of 84%, confirming the robustness and practical relevance of the proposed framework. Overall, the study presents an evidence‐based safety management approach that bridges the gap between regulatory compliance and operational safety excellence.
- 19 November 2026
- Published by Wiley in Quality and Reliability Engineering International
Strategic Safety Management for Hazardous Machinery: Integrating Safety Certification Systems and Regulatory Compliance for Accident Prevention
The persistent incidence of machinery‐related accidents in hazardous industrial settings highlights the need to move beyond traditional compliance‐focused safety practices toward more resilient and outcome‐oriented safety management systems. Although certification standards and regulatory requirements are widely implemented, many organizations struggle to translate formal compliance into sustained operational safety, resulting in recurring accidents, near‐miss events, and unsafe work behaviors. Addressing this gap, the present study develops and empirically validates an integrated Strategic Safety Management framework that conceptualizes safety as a proactive, organization‐wide capability embedded in daily operations. The framework incorporates safety certification mechanisms, regulatory adherence, safety training effectiveness, and managerial safety leadership as key independent drivers of safety performance, while the reduction of machinery‐related accidents measured through accident frequency, accident severity, and near‐miss occurrences serves as the primary dependent variable. A distinctive contribution of this study lies in explicitly modeling behavioral and organizational mechanisms, wherein worker safety awareness, organizational safety culture, and monitoring and inspection practices are examined as moderating variables that influence the strength of the relationships between strategic safety initiatives and machinery‐related accident reduction. The study uses a mixed‐method design, drawing on data from 50 respondents across automotive manufacturing, heavy engineering, and process industries, supported by organizational safety records. Comparative analysis shows that organizations implementing integrated safety practices experience approximately 53% lower average accident rates than those relying on fragmented interventions. Furthermore, the predictive classification model achieves an accuracy of 84%, confirming the robustness and practical relevance of the proposed framework. Overall, the study presents an evidence‐based safety management approach that bridges the gap between regulatory compliance and operational safety excellence.
- Open Access
- 14 May 2026
- Published by Kaunas University of Technology (KTU) in Materials Science
Effect of IR Radiation on Drilling of Natural Fiber Mesh-reinforced Hybrid Epoxy Composites
Due to anisotropic performance of polymer matrix composites (PMC) drilling is a complex process in traditional drilling. Different type of fiber meshes and their resistance to infrared radiation (IR) on drilling operations are examined in this study. The natural and synthetic meshes are used to fabricate the composites, which are jute fiber mesh composite (JTMC), glass fiber mesh mixed composite (GLMC), nylon fiber mesh mixed composite (NLMC), cotton fiber mesh mixed composite (CTMC), and gunnet fiber mesh mixed composite (GNMC).In order to reveal the addition of heat on the machining characteristics of different composites, the Infrared (IR) radiations are used in the machining zone. The most important process parameters in the drilling process such as drilling speed in rpm, feed rate in mm/min and machining zone temperature in oC are considered for the experiment. Among the composites, GNMC shows the lowest delimitation Factor (DF) of 1.3 i.e 52.2 % which is less than JTMC for the parameter combination of 60 rpm, 12 mm/min and 40 oC. Also, the least surface roughness in Ra (SR) noted with the JTMC, which is 44.6 % lesser than GNMC at the same parameter combination. The infrared radiation heat affects the strands of fibers and its soft nature with the stiffness which contributes major role on surface roughness. The GLMC and CTMC are produces the next lesser DF when compared with the JTMC, which creates 4.95 and 5.68 DF, respectively. Furthermore, scanning electron microscope (SEM) figure studies are carried out on the circumference of drilled workpiece to distinguish the effect of heating and fibers impact on drilling quality.
- 14 May 2026
- Published by Kaunas University of Technology (KTU) in Materials Science
Open AccessEffect of IR Radiation on Drilling of Natural Fiber Mesh-reinforced Hybrid Epoxy Composites
Due to anisotropic performance of polymer matrix composites (PMC) drilling is a complex process in traditional drilling. Different type of fiber meshes and their resistance to infrared radiation (IR) on drilling operations are examined in this study. The natural and synthetic meshes are used to fabricate the composites, which are jute fiber mesh composite (JTMC), glass fiber mesh mixed composite (GLMC), nylon fiber mesh mixed composite (NLMC), cotton fiber mesh mixed composite (CTMC), and gunnet fiber mesh mixed composite (GNMC).In order to reveal the addition of heat on the machining characteristics of different composites, the Infrared (IR) radiations are used in the machining zone. The most important process parameters in the drilling process such as drilling speed in rpm, feed rate in mm/min and machining zone temperature in oC are considered for the experiment. Among the composites, GNMC shows the lowest delimitation Factor (DF) of 1.3 i.e 52.2 % which is less than JTMC for the parameter combination of 60 rpm, 12 mm/min and 40 oC. Also, the least surface roughness in Ra (SR) noted with the JTMC, which is 44.6 % lesser than GNMC at the same parameter combination. The infrared radiation heat affects the strands of fibers and its soft nature with the stiffness which contributes major role on surface roughness. The GLMC and CTMC are produces the next lesser DF when compared with the JTMC, which creates 4.95 and 5.68 DF, respectively. Furthermore, scanning electron microscope (SEM) figure studies are carried out on the circumference of drilled workpiece to distinguish the effect of heating and fibers impact on drilling quality.
- Open Access
- 29 May 2025
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 32 (2) , 204-217
Microstructural Analysis and Optimization of Asbestos Free Brake Pad
A friction lining material that is free of asbestos has been developed using sea shell powder (with a diameter of 125 μm), phenolic resin as the binder, and alumina metal filings and graphite as fillers. Prior to pulverization, the sea shells were oven-cured at 100 °C for five hours to eliminate excess moisture. The resulting pulverized sea shell, along with phenolic resin, alumina metal filings, and graphite, was used to create samples, which were evaluated according to the ASTM D 4703-03 standard. The newly developed asbestos-free brake pads incorporating sea shell powder (SS) and four other components underwent physical, chemical, and Thermal Gravimetric-Differential Thermal Analysis (TG-DTA) assessments, comparing them with commercial brake pad materials. Morphological examinations of worn surfaces indicated various forms of wear, including abrasion, adhesion, grooving, and delamination. Scanning Electron Microscope (SEM) images showed that the worn surfaces of the composite with 35 wt.% SS powders exhibited a smoother finish with fewer cracks, suggesting reduced wear. Taguchi's analytical approach (L16 orthogonal array) was employed to assess the coefficient of friction and wear rate under different tribological parameters. Additionally, a statistical analysis of variance (ANOVA) was conducted to identify significant compositions for optimal brake lining performance. The ANOVA tables revealed that the regression models were valid as the P-values were less than 0.05 for a confidence level of 95 %.
- 29 May 2025
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 32 (2) , 204-217
Open AccessMicrostructural Analysis and Optimization of Asbestos Free Brake Pad
A friction lining material that is free of asbestos has been developed using sea shell powder (with a diameter of 125 μm), phenolic resin as the binder, and alumina metal filings and graphite as fillers. Prior to pulverization, the sea shells were oven-cured at 100 °C for five hours to eliminate excess moisture. The resulting pulverized sea shell, along with phenolic resin, alumina metal filings, and graphite, was used to create samples, which were evaluated according to the ASTM D 4703-03 standard. The newly developed asbestos-free brake pads incorporating sea shell powder (SS) and four other components underwent physical, chemical, and Thermal Gravimetric-Differential Thermal Analysis (TG-DTA) assessments, comparing them with commercial brake pad materials. Morphological examinations of worn surfaces indicated various forms of wear, including abrasion, adhesion, grooving, and delamination. Scanning Electron Microscope (SEM) images showed that the worn surfaces of the composite with 35 wt.% SS powders exhibited a smoother finish with fewer cracks, suggesting reduced wear. Taguchi's analytical approach (L16 orthogonal array) was employed to assess the coefficient of friction and wear rate under different tribological parameters. Additionally, a statistical analysis of variance (ANOVA) was conducted to identify significant compositions for optimal brake lining performance. The ANOVA tables revealed that the regression models were valid as the P-values were less than 0.05 for a confidence level of 95 %.
- 2 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105903
Optimization of friction stir processing parameters to improve mechanical properties and microstructure of Al5083 aluminum alloy reinforced with AlCoCrFeNiSi high-entropy alloy
This study explores integrating AlCoCrFeNiSi high-entropy alloy (HEA) particles into the Al5083 aluminum alloy matrix via Friction Stir Processing (FSP) to enhance mechanical characteristics. Microstructural analysis reveals a homogeneous distribution and size reduction of HEA particles, contributing to improved structural strength. X-ray diffraction (XRD) examination confirms the formation of solid solution phases in the HEA particles, validating their role in enhancing material properties. Through the utilization of Design of Experiments (DOE) and Response Surface Methodology (RSM), FSP parameters are systematically optimized, enabling precise predictions of mechanical behavior. Multi-response optimization identifies the optimal combination of FSP parameters, resulting in significant enhancements in Ultimate Tensile Strength (UTS) and Hardness, reaching 314 MPa, 42% elongation, and 75 HV, respectively. Scanning Electron Microscopy (SEM) analysis of tensile test specimens elucidates the impact of varied FSP parameters on microstructural features, emphasizing the importance of optimal mixing for improving interfacial bonding and mechanical properties. This study underscores the effectiveness of integrating HEA particles and optimizing FSP parameters to elevate the mechanical properties of Al5083 aluminum alloy, paving the way for tailored composite materials with enhanced performance for specific applications.
- 2 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105903
Optimization of friction stir processing parameters to improve mechanical properties and microstructure of Al5083 aluminum alloy reinforced with AlCoCrFeNiSi high-entropy alloy
This study explores integrating AlCoCrFeNiSi high-entropy alloy (HEA) particles into the Al5083 aluminum alloy matrix via Friction Stir Processing (FSP) to enhance mechanical characteristics. Microstructural analysis reveals a homogeneous distribution and size reduction of HEA particles, contributing to improved structural strength. X-ray diffraction (XRD) examination confirms the formation of solid solution phases in the HEA particles, validating their role in enhancing material properties. Through the utilization of Design of Experiments (DOE) and Response Surface Methodology (RSM), FSP parameters are systematically optimized, enabling precise predictions of mechanical behavior. Multi-response optimization identifies the optimal combination of FSP parameters, resulting in significant enhancements in Ultimate Tensile Strength (UTS) and Hardness, reaching 314 MPa, 42% elongation, and 75 HV, respectively. Scanning Electron Microscopy (SEM) analysis of tensile test specimens elucidates the impact of varied FSP parameters on microstructural features, emphasizing the importance of optimal mixing for improving interfacial bonding and mechanical properties. This study underscores the effectiveness of integrating HEA particles and optimizing FSP parameters to elevate the mechanical properties of Al5083 aluminum alloy, paving the way for tailored composite materials with enhanced performance for specific applications.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240363
Optimization of silver nanoparticle-enhanced nanofluids for improved thermal management in solar thermal collectors
This study aimed to enhance the thermal performance of solar thermal collectors using silver nanoparticle-enhanced nanofluids. Silver nanoparticles, known for their high thermal conductivity, were synthesized via chemical reduction, stabilized with polyvinylpyrrolidone, and dispersed in base fluids like deionized water and ethylene glycol. Various nanoparticle sizes (20 nm to 50 nm) and concentrations (0.2 wt% to 0.8 wt%) were tested to optimize thermal conductivity while maintaining stability. Thermal properties were measured using the transient hot-wire method for conductivity, rotational rheometer for viscosity, and differential scanning calorimetry for specific heat capacity. Stability was monitored via UV-Vis spectrophotometry. Results indicated that smaller nanoparticles (20 nm) at lower concentrations (0.2 wt%) yielded the highest thermal conductivity of 0.73 W/mK, due to their high surface area-to-volume ratio. Viscosity increased with nanoparticle size and concentration, peaking at 0.0012 Pa.s for 50 nm nanoparticles at 0.8 wt%. Specific heat capacity remained relatively stable, slightly increasing with larger nanoparticles. Conclusions reveal that optimizing nanoparticle size and concentration is crucial for balancing enhanced thermal conductivity and manageable viscosity. These findings underscore the potential of silver nanoparticle-enhanced nanofluids in improving the efficiency of solar thermal systems, offering valuable insights for future research in sustainable energy technologies.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240363
Open AccessOptimization of silver nanoparticle-enhanced nanofluids for improved thermal management in solar thermal collectors
This study aimed to enhance the thermal performance of solar thermal collectors using silver nanoparticle-enhanced nanofluids. Silver nanoparticles, known for their high thermal conductivity, were synthesized via chemical reduction, stabilized with polyvinylpyrrolidone, and dispersed in base fluids like deionized water and ethylene glycol. Various nanoparticle sizes (20 nm to 50 nm) and concentrations (0.2 wt% to 0.8 wt%) were tested to optimize thermal conductivity while maintaining stability. Thermal properties were measured using the transient hot-wire method for conductivity, rotational rheometer for viscosity, and differential scanning calorimetry for specific heat capacity. Stability was monitored via UV-Vis spectrophotometry. Results indicated that smaller nanoparticles (20 nm) at lower concentrations (0.2 wt%) yielded the highest thermal conductivity of 0.73 W/mK, due to their high surface area-to-volume ratio. Viscosity increased with nanoparticle size and concentration, peaking at 0.0012 Pa.s for 50 nm nanoparticles at 0.8 wt%. Specific heat capacity remained relatively stable, slightly increasing with larger nanoparticles. Conclusions reveal that optimizing nanoparticle size and concentration is crucial for balancing enhanced thermal conductivity and manageable viscosity. These findings underscore the potential of silver nanoparticle-enhanced nanofluids in improving the efficiency of solar thermal systems, offering valuable insights for future research in sustainable energy technologies.
- 18 December 2023
- Published by Inventive Research Organization in Recent Research Reviews Journal
- Vol. 2 (2) , 426-434
A Research on Construction Industry - Technologies used for Construction Monitoring
The industrial sector of production and trade concerned with creating, restoring, updating, and maintaining infrastructure is known as the construction industry. Buildings and other constructed infrastructure, including roads, bridges, and other structures, are constructed by the construction industry. These sectors' offers will vary depending on the level of expertise, the emphasis on residential, industrial, and water constructions, etc. The study work from the construction business will briefly focus on construction monitoring utilising several technologies to monitor. This research work will describe construction monitoring, the technologies utilised at the site to monitor, and briefly explain one of the monitoring technologies which is used effectively in construction monitoring, their applications, and upcoming works.
- 18 December 2023
- Published by Inventive Research Organization in Recent Research Reviews Journal
- Vol. 2 (2) , 426-434
A Research on Construction Industry - Technologies used for Construction Monitoring
The industrial sector of production and trade concerned with creating, restoring, updating, and maintaining infrastructure is known as the construction industry. Buildings and other constructed infrastructure, including roads, bridges, and other structures, are constructed by the construction industry. These sectors' offers will vary depending on the level of expertise, the emphasis on residential, industrial, and water constructions, etc. The study work from the construction business will briefly focus on construction monitoring utilising several technologies to monitor. This research work will describe construction monitoring, the technologies utilised at the site to monitor, and briefly explain one of the monitoring technologies which is used effectively in construction monitoring, their applications, and upcoming works.
- 23 June 2023
- Published by Springer Nature in Silicon
- Vol. 15 (16) , 7095-7108
Evaluation of Agrowaste/Nanoclay/SiO2-Based Blended Nanocomposites for Structural Applications: Comparative Physical and Mechanical Properties
- 23 June 2023
- Published by Springer Nature in Silicon
- Vol. 15 (16) , 7095-7108
Evaluation of Agrowaste/Nanoclay/SiO2-Based Blended Nanocomposites for Structural Applications: Comparative Physical and Mechanical Properties
- 1 January 2023
- Published by Czech Technical University in Prague - Central Library in Neural Network World
- Vol. 33 (6) , 461-479
Development of an efficient deep learning system for automatic prediction of power demand based on the forecasting of power distribution
Electrical load prediction aids electrical producing and allocation firms in planning capacity and management to ensure that all customers get the energy they need on a consistent basis. Despite the fact that numerous prediction models have been created, none of them can be applied to all market trends. As a result, this article provides a practical technique for predicting customer power usage. To address the troubles of power utilization surveying, CRF-based energy utilization choosing strategy conditional random field based powered consumption prediction (CRF-PCP) is proposed. A convolutional brain organization (a technique in view of artificial intelligence) joined with a contingent irregular field is utilized to prepare and foresee the energy consumption (EC) of the districts. The training model’s features are extracted using a spatiotemporal texture map (STTM). Supervisory control and data acquisition (SCADA) is utilized to gather and keep up with information on the power utilization of local purchasers. The information given in the cloud is sent to the power circulation framework. Additionally, power utilization expectation utilizing a convolution neural network (CNN) with profound conditional random field (CRF) provides an outcome of 98.9% precision, which is far superior to prior research in the same area. The acquired result demonstrates that the employed machine learning methods are performing at their peak.
- 1 January 2023
- Published by Czech Technical University in Prague - Central Library in Neural Network World
- Vol. 33 (6) , 461-479
Development of an efficient deep learning system for automatic prediction of power demand based on the forecasting of power distribution
Electrical load prediction aids electrical producing and allocation firms in planning capacity and management to ensure that all customers get the energy they need on a consistent basis. Despite the fact that numerous prediction models have been created, none of them can be applied to all market trends. As a result, this article provides a practical technique for predicting customer power usage. To address the troubles of power utilization surveying, CRF-based energy utilization choosing strategy conditional random field based powered consumption prediction (CRF-PCP) is proposed. A convolutional brain organization (a technique in view of artificial intelligence) joined with a contingent irregular field is utilized to prepare and foresee the energy consumption (EC) of the districts. The training model’s features are extracted using a spatiotemporal texture map (STTM). Supervisory control and data acquisition (SCADA) is utilized to gather and keep up with information on the power utilization of local purchasers. The information given in the cloud is sent to the power circulation framework. Additionally, power utilization expectation utilizing a convolution neural network (CNN) with profound conditional random field (CRF) provides an outcome of 98.9% precision, which is far superior to prior research in the same area. The acquired result demonstrates that the employed machine learning methods are performing at their peak.
- Open Access
- 3 October 2022
- Published by Revista de Chimie SRL in Materiale Plastice
- Vol. 59 (3) , 100-108
Asbestos-Free Brake Lining Material Using Sea Shell
Materiale Plastice - a peer-reviewed scientific journal,specialised in the field of chemistry, polymers, elastomers and plastics research
- 3 October 2022
- Published by Revista de Chimie SRL in Materiale Plastice
- Vol. 59 (3) , 100-108
Open AccessAsbestos-Free Brake Lining Material Using Sea Shell
Materiale Plastice - a peer-reviewed scientific journal,specialised in the field of chemistry, polymers, elastomers and plastics research
- 14 June 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 7278-7289
Compression behavior of 3D printed isogrid cylindrical shell structures using experimental and finite element modeling
Lattice structures have been widely used in aircraft and automobile industries due to their excellent mechanical properties namely high specific strength, specific stiffness, and energy absorption capability. On the other hand, additive manufacturing that is considered as an essential for Industry 4.0 offers incredible opportunities for product development and production flexibility. Previous research on 3D printed isogrid structures focused on isogrid panels and their buckling behavior, whereas isogrid lattice cylindrical shells garnered less attention. This work reports the effect of short carbon fiber reinforcement with polyamide three‐dimensional printing material on the compression response of isogrid lattice shell structures by experimental and numerical modeling. Isogrid cylindrical shells were three dimensionally printed using fused deposition modeling. Initially, test coupons were printed using polyamide and carbon fiber reinforced polyamide and their mechanical properties were found using uniaxial tensile testing. The obtained tensile properties were given as an input to the numerical modeling performed using LS‐DYNA®. The peak load and the maximum displacement of the printed isogrid lattice shells subjected to axial compression loads were experimentally evaluated. The numerical findings were compared with those produced using experimental methods. The error in estimating the peak load of lattice cylinders through numerical modeling was limited to 5.35%. The effect of geometric parameters namely rib width (helical and hoop), shell thickness, helical angle of ribs on the buckling strength was also studied.
- 14 June 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 7278-7289
Compression behavior of 3D printed isogrid cylindrical shell structures using experimental and finite element modeling
Lattice structures have been widely used in aircraft and automobile industries due to their excellent mechanical properties namely high specific strength, specific stiffness, and energy absorption capability. On the other hand, additive manufacturing that is considered as an essential for Industry 4.0 offers incredible opportunities for product development and production flexibility. Previous research on 3D printed isogrid structures focused on isogrid panels and their buckling behavior, whereas isogrid lattice cylindrical shells garnered less attention. This work reports the effect of short carbon fiber reinforcement with polyamide three‐dimensional printing material on the compression response of isogrid lattice shell structures by experimental and numerical modeling. Isogrid cylindrical shells were three dimensionally printed using fused deposition modeling. Initially, test coupons were printed using polyamide and carbon fiber reinforced polyamide and their mechanical properties were found using uniaxial tensile testing. The obtained tensile properties were given as an input to the numerical modeling performed using LS‐DYNA®. The peak load and the maximum displacement of the printed isogrid lattice shells subjected to axial compression loads were experimentally evaluated. The numerical findings were compared with those produced using experimental methods. The error in estimating the peak load of lattice cylinders through numerical modeling was limited to 5.35%. The effect of geometric parameters namely rib width (helical and hoop), shell thickness, helical angle of ribs on the buckling strength was also studied.