Laura Mercadé
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Laura Mercadé has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro Martínez
Universitat Politècnica de València
16 shared publications - Elena Pinilla-Cienfuegos
Nanophotonics Technology Center, Universitat Politècnica de València, Valencia, Spain
6 shared publications - Miguel Sinusia Lozano
Nanophotonics Technology Center (NTC), Universitat Politècnica de València, Valencia, Spain
6 shared publications - Ángela Barreda
Group of Displays and Photonics Applications, Carlos III University of Madrid, Avda. de la Universidad, 30, Leganés, 28911 Madrid, Spain
6 shared publications - Amadeu Griol
Nanophotonics Technology Center, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain
5 shared publications - David Ortiz de Zárate
Nanophotonics Technology Center, Universidad Politécnica de Valencia, Valencia, Spain
5 shared publications
Latest Publications
- Open Access
- 3 August 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (31) , 315303
Critical dimensions variability-aware design of optomechanical nano beams
Subwavelength geometrical dimension, which often originates from fabrication-induced dimensional deviations variability, can strongly influence the performance of phononic–photonic crystal optomechanical (OM) nanobeams. Here, we present a suitable variability-aware design framework for OM nanobeams by combining extraction of critical dimension variations from scanning electron microscopy images and finite-element modeling. We extracted the impact of deterministic geometrical deviations on the unit cell of the phononic and photonic crystals to identify the most critical fabrication-sensitive parameters. We extended the study to the full cavity, where SEM-informed digital-twin models are used to quantify the influence of systematic dimensional variations on the optical and mechanical resonance frequencies, the optical quality factor, the effective mode volume, and the total OM coupling rate. The results indicate that biased dimensional deviations of ±10 nm exert a minor effect on the overall device performance, whereas larger deviations have a stronger impact on the photonic, phononic, and OM response.
- 3 August 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (31) , 315303
Open AccessCritical dimensions variability-aware design of optomechanical nano beams
Subwavelength geometrical dimension, which often originates from fabrication-induced dimensional deviations variability, can strongly influence the performance of phononic–photonic crystal optomechanical (OM) nanobeams. Here, we present a suitable variability-aware design framework for OM nanobeams by combining extraction of critical dimension variations from scanning electron microscopy images and finite-element modeling. We extracted the impact of deterministic geometrical deviations on the unit cell of the phononic and photonic crystals to identify the most critical fabrication-sensitive parameters. We extended the study to the full cavity, where SEM-informed digital-twin models are used to quantify the influence of systematic dimensional variations on the optical and mechanical resonance frequencies, the optical quality factor, the effective mode volume, and the total OM coupling rate. The results indicate that biased dimensional deviations of ±10 nm exert a minor effect on the overall device performance, whereas larger deviations have a stronger impact on the photonic, phononic, and OM response.
- Open Access
- 1 August 2026
- Published by IOP Publishing in European Journal of Physics
- Vol. 47 (4) , 045707
Experimental visualization of phonon dispersion in one-dimensional monoatomic and diatomic chains
We present a low-cost laboratory experiment designed to visualize phonon dispersion relations in one-dimensional monoatomic and diatomic lattices. The system consists of a stretched string under controlled tension with discrete masses attached at regular intervals, providing a mechanical analogue of lattice dynamics. The experimental conditions are selected so that the inertia of the discrete masses dominates that of the string segments, ensuring discrete-lattice behaviour and allowing a meaningful comparison between experimental data and ideal phonon dispersion relations.
- 1 August 2026
- Published by IOP Publishing in European Journal of Physics
- Vol. 47 (4) , 045707
Open AccessExperimental visualization of phonon dispersion in one-dimensional monoatomic and diatomic chains
We present a low-cost laboratory experiment designed to visualize phonon dispersion relations in one-dimensional monoatomic and diatomic lattices. The system consists of a stretched string under controlled tension with discrete masses attached at regular intervals, providing a mechanical analogue of lattice dynamics. The experimental conditions are selected so that the inertia of the discrete masses dominates that of the string segments, ensuring discrete-lattice behaviour and allowing a meaningful comparison between experimental data and ideal phonon dispersion relations.
- 28 July 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 29092
Single nanoparticle deposition and detection on a photonic crystal nanobeam cavity
Optical cavities are highly interesting elements for detecting nanoparticles, since their optical response is strongly affected - and therefore the response is easily measured - by the presence of a nanoparticle in their vicinity. Ideally, the nanoparticle should be placed in the region with maximum field confinement to maximize light-matter interaction and provide a highly sensitive response. However, in real applications, we usually do not have control over where the nanoparticle is actually placed. In this work, we consider the case of detection of non-resonant gold nanospheres using a silicon photonic crystal nanobeam cavity for the case in which the nanoparticle is not placed in the region of maximum field confinement at resonance (weak coupling). In our experiments, we use APTES (3-aminopropyltriethoxysilane) to functionalize the cavity so that gold nanoparticles can bond to it. Then we use a nanoprinter to deposit gold nanoparticles on predefined positions that, for the cavity under experimental study, turn out to be on a sidewall of the cavity. Optical characterization of the device before and after the nanoparticle deposition shows a large variation in the optical response, which we attribute to the perturbation of the optical resonance by the presence of the nanoparticle. Numerical simulations support our experimental findings, which confirm that optical cavities can perform nanoparticle detection even in cases where they are not placed in regions with maximum electric field.
- 28 July 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 29092
Single nanoparticle deposition and detection on a photonic crystal nanobeam cavity
Optical cavities are highly interesting elements for detecting nanoparticles, since their optical response is strongly affected - and therefore the response is easily measured - by the presence of a nanoparticle in their vicinity. Ideally, the nanoparticle should be placed in the region with maximum field confinement to maximize light-matter interaction and provide a highly sensitive response. However, in real applications, we usually do not have control over where the nanoparticle is actually placed. In this work, we consider the case of detection of non-resonant gold nanospheres using a silicon photonic crystal nanobeam cavity for the case in which the nanoparticle is not placed in the region of maximum field confinement at resonance (weak coupling). In our experiments, we use APTES (3-aminopropyltriethoxysilane) to functionalize the cavity so that gold nanoparticles can bond to it. Then we use a nanoprinter to deposit gold nanoparticles on predefined positions that, for the cavity under experimental study, turn out to be on a sidewall of the cavity. Optical characterization of the device before and after the nanoparticle deposition shows a large variation in the optical response, which we attribute to the perturbation of the optical resonance by the presence of the nanoparticle. Numerical simulations support our experimental findings, which confirm that optical cavities can perform nanoparticle detection even in cases where they are not placed in regions with maximum electric field.
- Open Access
- 4 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Phase-noise and stability comparison of fiber-loop and integrated-waveguide coupling in optomechanical crystal oscillators
Optomechanical crystal cavities (OMCCs) display appealing features to function as on-chip photonic microwave oscillators (PMOs) when operated in the phonon lasing regime. Silicon OMCCs have so far demonstrated the best performance in terms of phase noise in a free-running configuration. Some preliminary experiments have also demonstrated that the generated microwave tone can be used for mixing wireless signals compliant with 5G standards. Still, more research is needed to identify the primary noise sources and determine the path towards improvement. Here, we report experiments on the realization of optomechanical PMOs operating at 4 GHz under two different driving conditions of the cavity: light coupling via a tapered fiber loop versus using an adjacent integrated waveguide illuminated by a lensed fiber. We performed measurements of the phase noise and the frequency stability in time of the detected tone for both cases and observed an improvement when the light is coupled by an adjacent integrated waveguide. This can be explained by the fact that the ambient-induced motion and changes due to perturbations in the refractive index of the medium surrounding the fiber loop result in variations of the coupling, which in turn affect the stability of the PMO. These results emphasize the relevance of a mechanically stable coupling technique when using such optomechanical devices in real applications, which can be of particular importance in environments where large vibrations are expected.
- 4 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessPhase-noise and stability comparison of fiber-loop and integrated-waveguide coupling in optomechanical crystal oscillators
Optomechanical crystal cavities (OMCCs) display appealing features to function as on-chip photonic microwave oscillators (PMOs) when operated in the phonon lasing regime. Silicon OMCCs have so far demonstrated the best performance in terms of phase noise in a free-running configuration. Some preliminary experiments have also demonstrated that the generated microwave tone can be used for mixing wireless signals compliant with 5G standards. Still, more research is needed to identify the primary noise sources and determine the path towards improvement. Here, we report experiments on the realization of optomechanical PMOs operating at 4 GHz under two different driving conditions of the cavity: light coupling via a tapered fiber loop versus using an adjacent integrated waveguide illuminated by a lensed fiber. We performed measurements of the phase noise and the frequency stability in time of the detected tone for both cases and observed an improvement when the light is coupled by an adjacent integrated waveguide. This can be explained by the fact that the ambient-induced motion and changes due to perturbations in the refractive index of the medium surrounding the fiber loop result in variations of the coupling, which in turn affect the stability of the PMO. These results emphasize the relevance of a mechanically stable coupling technique when using such optomechanical devices in real applications, which can be of particular importance in environments where large vibrations are expected.
- 17 July 2025
- Published by Universitat Politecnica de Valencia
Píldora educativa de estática en el curso de física aplicada para mejorar la motivación de los estudiantes en el Grado en Ingeniería Mecánica
Este trabajo investiga el impacto de una experiencia denominada "Píldora Educativa de Estática" en estudiantes de primer curso del Grado en Ingeniería Mecánica en la asignatura Física Aplicada. Considerando el conocimiento inicial de estos estudiantes sobre Estática, un profesor especializado en Resistencia de Materiales impartió una sesión centrada en la aplicación práctica de la Estática mediante el diseño y cálculo de estructuras articuladas. Durante la sesión se guió a los estudiantes en el diseño de una estructura y su análisis para calcular las fuerzas que actúan sobre cada elemento relacionando los conocimientos teóricos con la práctica. La eficacia de la Píldora Educativa se evaluó previa y posteriormente a la actividad, demostrando mejoras significativas en la comprensión de los conceptos de Estática y su capacidad para aplicarlos a situaciones reales. Además, los comentarios de los estudiantes indicaron una mayor motivación e interés en la materia gracias a la naturaleza interactiva y práctica de la sesión. En general, la integración de la Píldora Educativa en la asignatura de Física Aplicada ha demostrado ser una excelente estrategia pedagógica no sólo mejorando la comprensión de la Estática por parte de los estudiantes, sino también fomentando un entorno de aprendizaje más atractivo y motivador.
- 17 July 2025
- Published by Universitat Politecnica de Valencia
Píldora educativa de estática en el curso de física aplicada para mejorar la motivación de los estudiantes en el Grado en Ingeniería Mecánica
Este trabajo investiga el impacto de una experiencia denominada "Píldora Educativa de Estática" en estudiantes de primer curso del Grado en Ingeniería Mecánica en la asignatura Física Aplicada. Considerando el conocimiento inicial de estos estudiantes sobre Estática, un profesor especializado en Resistencia de Materiales impartió una sesión centrada en la aplicación práctica de la Estática mediante el diseño y cálculo de estructuras articuladas. Durante la sesión se guió a los estudiantes en el diseño de una estructura y su análisis para calcular las fuerzas que actúan sobre cada elemento relacionando los conocimientos teóricos con la práctica. La eficacia de la Píldora Educativa se evaluó previa y posteriormente a la actividad, demostrando mejoras significativas en la comprensión de los conceptos de Estática y su capacidad para aplicarlos a situaciones reales. Además, los comentarios de los estudiantes indicaron una mayor motivación e interés en la materia gracias a la naturaleza interactiva y práctica de la sesión. En general, la integración de la Píldora Educativa en la asignatura de Física Aplicada ha demostrado ser una excelente estrategia pedagógica no sólo mejorando la comprensión de la Estática por parte de los estudiantes, sino también fomentando un entorno de aprendizaje más atractivo y motivador.
- Open Access
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-9
Performance Evaluation of Dual-Drive Mach-Zehnder Modulator and Optomechanical Crystal Cavity Comb Generation for All-Optical Band Conversion in 5G-Advanced Cellular Systems
Multiband operation is a key aspect of emerging 5G-Advanced cellular systems, also named 5.5G, which target seamless provision of multi-gigabit per second connectivity employing sub-6 GHz and mm-wave overlapping coverage. All-optical frequency conversion gives flexibility due to the feasible high-speed reconfiguration in broad bands and large radio signal bandwidth. Optical frequency combs, featuring a spectrum of discrete, equally spaced coherent frequency lines, are crucial for high-precision metrology, spectroscopy, and telecommunications. Their effectiveness in all-optical frequency conversion depends on their stability in terms of frequency drift, phase noise, and power distribution across the comb lines. This paper evaluates experimentally the generation of optical frequency combs employing two distinct technologies: a dual-driven Mach-Zehnder modulator (DD-MZM) and an optomechanical crystal cavity (OMCC), and experimentally compares their performance for all-optical frequency conversion of 5G data streams. The DD-MZM implementation generates a comb with flexible line spacing and comprising several spectrum-flat lines with low phase noise ($-88.5$ dBc/Hz at 1 kHz offset and $-108.3$ dBc/Hz at 100 kHz offset). The OMCC implementation provides a reduced footprint (182 $\mu \mathrm{m}^{2}$) since it is implemented on a silicon chip and has the extra advantage of generating an optical comb without an external local oscillator, which reduces its power requirements (under 1 mW) while providing a phase noise of $-38.3$ dBc/Hz at 1 kHz offset and $-97.1$ dBc/Hz at 100 kHz offset. The polarization stability and jitter of both implementations are also evaluated. The experimental demonstration evaluates the error vector magnitude (EVM) of frequency-converted 3GPP 5G NR signals using both implementations, confirming the successful transmission with EVM smaller than 12.01% for DD-MZM up to the third harmonic and EVM smaller than 17.36% with the OMCC first harmonic.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-9
Open AccessPerformance Evaluation of Dual-Drive Mach-Zehnder Modulator and Optomechanical Crystal Cavity Comb Generation for All-Optical Band Conversion in 5G-Advanced Cellular Systems
Multiband operation is a key aspect of emerging 5G-Advanced cellular systems, also named 5.5G, which target seamless provision of multi-gigabit per second connectivity employing sub-6 GHz and mm-wave overlapping coverage. All-optical frequency conversion gives flexibility due to the feasible high-speed reconfiguration in broad bands and large radio signal bandwidth. Optical frequency combs, featuring a spectrum of discrete, equally spaced coherent frequency lines, are crucial for high-precision metrology, spectroscopy, and telecommunications. Their effectiveness in all-optical frequency conversion depends on their stability in terms of frequency drift, phase noise, and power distribution across the comb lines. This paper evaluates experimentally the generation of optical frequency combs employing two distinct technologies: a dual-driven Mach-Zehnder modulator (DD-MZM) and an optomechanical crystal cavity (OMCC), and experimentally compares their performance for all-optical frequency conversion of 5G data streams. The DD-MZM implementation generates a comb with flexible line spacing and comprising several spectrum-flat lines with low phase noise ($-88.5$ dBc/Hz at 1 kHz offset and $-108.3$ dBc/Hz at 100 kHz offset). The OMCC implementation provides a reduced footprint (182 $\mu \mathrm{m}^{2}$) since it is implemented on a silicon chip and has the extra advantage of generating an optical comb without an external local oscillator, which reduces its power requirements (under 1 mW) while providing a phase noise of $-38.3$ dBc/Hz at 1 kHz offset and $-97.1$ dBc/Hz at 100 kHz offset. The polarization stability and jitter of both implementations are also evaluated. The experimental demonstration evaluates the error vector magnitude (EVM) of frequency-converted 3GPP 5G NR signals using both implementations, confirming the successful transmission with EVM smaller than 12.01% for DD-MZM up to the third harmonic and EVM smaller than 17.36% with the OMCC first harmonic.
- 10 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (1) , 1458-1465
Bricks-on-pedestals silicon optomechanical cavity: a mass sensor for nanoparticles detection
Optomechanical cavities can be used as highly sensitive mass sensors actuated by an optical field. In this work, we introduce and numerically demonstrate a new design for an optomechanical cavity consisting of a series of asymmetrically distributed rectangular silicon nanobricks, with each brick acting as an independent mechanical resonator but all coupled to the same optical field. Each silicon brick is placed on top of a thin silica pillar that ensures mechanical support whilst providing enough acoustic isolation between the individual mechanical resonances - at GHz frequencies - of each brick. The mass sensing capabilities of this cavity are studied through numerical simulations, proving that a point mass approximation can be used for silica nanoparticles with a radius smaller than 100 nm and that different nanoparticles can be measured independently but simultaneously and in real-time.
- 10 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (1) , 1458-1465
Bricks-on-pedestals silicon optomechanical cavity: a mass sensor for nanoparticles detection
Optomechanical cavities can be used as highly sensitive mass sensors actuated by an optical field. In this work, we introduce and numerically demonstrate a new design for an optomechanical cavity consisting of a series of asymmetrically distributed rectangular silicon nanobricks, with each brick acting as an independent mechanical resonator but all coupled to the same optical field. Each silicon brick is placed on top of a thin silica pillar that ensures mechanical support whilst providing enough acoustic isolation between the individual mechanical resonances - at GHz frequencies - of each brick. The mass sensing capabilities of this cavity are studied through numerical simulations, proving that a point mass approximation can be used for silica nanoparticles with a radius smaller than 100 nm and that different nanoparticles can be measured independently but simultaneously and in real-time.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th3J.3
Optomechanical Cavities for All-Optical Microwave Signal Processing
All-optical microwave signal processing using optomechanical cavities on silicon chips in the optical domain is demonstrated. Demonstrations include low phase noise generation, frequency conversion, and enhanced stability, showing promise for next-generation wireless and satellite communications.
- 1 January 2025
- Published by Optica Publishing Group
- p. Th3J.3
Optomechanical Cavities for All-Optical Microwave Signal Processing
All-optical microwave signal processing using optomechanical cavities on silicon chips in the optical domain is demonstrated. Demonstrations include low phase noise generation, frequency conversion, and enhanced stability, showing promise for next-generation wireless and satellite communications.
- Open Access
Use of ChatGPT as a Virtual Mentor on K-12 Students Learning Science in the Fourth Industrial Revolution
Education 4.0 arises to provide citizens with the technical/digital competencies and cognitive/interpersonal skills demanded by Industry 4.0. New technologies drive this change, though time-independent learning remains a challenge, because students might face a lack of support, advice and surveillance when teachers are unavailable. This study proposes complementing presential lessons with online learning driven by ChatGPT, applied as an educational tool able to mentor K-12 students learning science at home. First, ChatGPT’s performance in the field of K-12 science is evaluated, scoring A (9.3/10 in 2023, and 9.7/10 in 2024) and providing detailed, analytic, meaningful, and human-like answers. Then, an empirical interventional study is performed to assess the impact of using ChatGPT as a virtual mentor on real K-12 students. After the intervention, the grades of students in the experimental group improved by 30%, and 70% of students stated a positive perception of the AI, suggesting a positive impact of the proposed educational approach. After discussion, the study concludes ChatGPT might be a useful educational tool able to provide K-12 students learning science with the functional and social/emotional support they might require, democratizing a higher level of knowledge acquisition and promoting students’ autonomy, security and self-efficacy. The results probe ChatGPT’s remarkable capacity (and immense potential) to assist teachers in their mentoring tasks, laying the foundations of virtual mentoring and paving the way for future research aimed at extending the study to other areas and levels, obtaining a more realistic view of AI’s impact on education.
Open AccessUse of ChatGPT as a Virtual Mentor on K-12 Students Learning Science in the Fourth Industrial Revolution
Education 4.0 arises to provide citizens with the technical/digital competencies and cognitive/interpersonal skills demanded by Industry 4.0. New technologies drive this change, though time-independent learning remains a challenge, because students might face a lack of support, advice and surveillance when teachers are unavailable. This study proposes complementing presential lessons with online learning driven by ChatGPT, applied as an educational tool able to mentor K-12 students learning science at home. First, ChatGPT’s performance in the field of K-12 science is evaluated, scoring A (9.3/10 in 2023, and 9.7/10 in 2024) and providing detailed, analytic, meaningful, and human-like answers. Then, an empirical interventional study is performed to assess the impact of using ChatGPT as a virtual mentor on real K-12 students. After the intervention, the grades of students in the experimental group improved by 30%, and 70% of students stated a positive perception of the AI, suggesting a positive impact of the proposed educational approach. After discussion, the study concludes ChatGPT might be a useful educational tool able to provide K-12 students learning science with the functional and social/emotional support they might require, democratizing a higher level of knowledge acquisition and promoting students’ autonomy, security and self-efficacy. The results probe ChatGPT’s remarkable capacity (and immense potential) to assist teachers in their mentoring tasks, laying the foundations of virtual mentoring and paving the way for future research aimed at extending the study to other areas and levels, obtaining a more realistic view of AI’s impact on education.
- Open Access
- 1 November 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (11)
Cascaded injection locking of optomechanical crystal oscillators
Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, therefore increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities acting as optomechanical oscillators to an external reference signal that subtly modulates the laser driving only one of them. In contrast to most previous implementations, both cavities support isolated optical resonances and interact by a weak mechanical interconnection. This configuration allows one cavity to be used for probing the mechanical perturbation generated by the oscillator that receives the external forcing. The combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon–photon hybrid circuits.
- 1 November 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (11)
Open AccessCascaded injection locking of optomechanical crystal oscillators
Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, therefore increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities acting as optomechanical oscillators to an external reference signal that subtly modulates the laser driving only one of them. In contrast to most previous implementations, both cavities support isolated optical resonances and interact by a weak mechanical interconnection. This configuration allows one cavity to be used for probing the mechanical perturbation generated by the oscillator that receives the external forcing. The combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon–photon hybrid circuits.