ÇIÇetin İncekara

Çetin İncekara

*This is an algorithmically generated author record based on publicly available information.

Çetin İncekara has a total of 1 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enerji projelerinde arazi edinim faaliyetleri ve arazi değerlemesi

    by Çetin Önder İncekara, Süleyman Lala

    Günümüz piyasalarında gayrimenkul sektörü emtia ve finansal piyasalarının en önemli araçlarından birisidir. Gayrimenkulün değeri (hesaplanan) gerçek değerine ne kadar yakınsa; işlemlere taraf kurum, kuruluş ve ülke ekonomisine faydası o kadar gerçekçi olacaktır. İrtifak hakkı değeri; irtifak hakkı için geçerli oranları ile arazi değeri için kalan irtifak hakkı süresi hesaba katılarak arazinin tamamının irtifak öncesi değeri ile irtifak sonrası değeri arasındaki değer düşüklüğü hesaplanır. Ülkemizin taşınmaz değerleme sistemi ile ilgili bir mevzuat bulunmadığından dolayı değerleme için ihtiyaç duyulan veri tabanı bulunmamaktadır. Çalışma ile ülkemizde taşınmaz değerleme sistemi kapsamında enerji sektöründe/projelerinde uygulanan yöntem ile değerleme için çözüm geliştirilmesi amaçlanmıştır. Çalışmada enerji konusunda değerleme uzmanlarıyla görüşülmüş ve tarım arazilerinde değer takdiri yasal bir zorunluluk olan “Gelirlerin Kapitalizasyonu” yönteminde kapitalizasyon oranını etkileyen olumlu ve olumsuz faktörler ile objektif değer artışı değerlendirilmesi için bir bulanık matematiksel model geliştirilerek değerlendirilmiştir. Bu çalışmadaki amaç uygulamada irtifak hakkının değerlemesi çerçevesinde; gelirlerin kapitalizasyonu yönteminde kapitalizasyon oranını etkileyen olumlu ve olumsuz faktörler irdelenmiş, gerektiği durumlarda objektif değer artışı da kullanılarak enerji sektöründen örnek bir uygulama ile enerji projelerinde uygulanan arazi edinim faaliyetleri ile arazi değerlemesi açıklanmaya çalışılmıştır.


  • DESIGNING ERGONOMIC POST-COVID-19 SCHOOL FURNITURE

    by Cetin Onder Incekara

    Nappropriately designed classroom furniture that does not take children’s anthropometric measurements into account has a negative effect on children’s musculoskeletal systems. In this study, which kept Covid-19 pandemic policies in mind, students’ static anthropometric dimensions were measured and their descriptive statistics calculated, using mean, standard deviation, percentiles, and statistical tests, including the t-test and one-way ANOVA. A new design for ergonomically oriented classroom furniture for primary school students is proposed that takes into consideration the measured anthropometric dimensions for students’ safety, health, and well-being, and for post-Covid-19 policies. Given the results of the study, school managements must consider the gender and age of students, and take post-Covid-19 policies/protocols into account when procuring classroom furniture. Keywords Ergonomic design; school furniture; primary school students; COVID.


  • BULANIK TOPSIS VE BULANIK VIKOR YÖNTEMLERİYLE BİR ENERJİ ŞİRKETİNDE KURUMSAL HAFIZANIN OLUŞTURULMASI

    by Çetin İncekara

    According to today's strategy of gaining competitive advantage; it is possible for a corporation to be effective and efficient whether it aims to make the same work better, faster, more efficient and cheaper than other corporations. In today's information age, change and competition in business are experienced rapidly; "organizational memory", where the collective feelings/experiences of corporations are stored, is the basis of the memory in the Corporation and it is invisible, whereas it is formed by the experiences and experiences that have penetrated into whole corporation, has a major/important place. Organizational memory includes all kinds of data/information, methods and capabilities that the corporations’ experience in the past and associate with its current decisions when necessary. In the study, 45 number of experts working in the energy sector (Decision-Makers: DM) were interviewed to determine the criteria, sub-criteria and weights used in facilitating knowledge and formation of organizational memory in companies, and as a result of the interviews, the criteria and sub-criteria of the study are formed. The criteria and sub-criteria (11 number of main criteria /41 number of sub-criteria) are evaluated. In the study, fuzzy multi-objective mathematical model (FMOM: by using Fuzzy AHP (Analytical Hierarchy Process), Fuzzy TOPSIS and Fuzzy VIKOR methods) are used to develop/evaluate/calculate the formation of organizational memory in companies working in energy sector. By the help of the mathematical model, formation of organizational memory in 12 number of energy companies have been evaluated/calculated by using Fuzzy TOPSIS and Fuzzy VIKOR methods and most suitable company is selected. In the study, the criteria were weighted by using Fuzzy AHP method, and among the criteria the most important evaluation dimension/main-criteria is "Storage Criteria" which has the highest importance weight value, therefore it was the most important criterion. The most important factor in storing organizational memory is the place where it is stored and should be improved by time. In energy companies; organizational memory/info may be stored in many places. These places are: business plan, work schedules/flow diagrams/programs, procedures, rules and guidelines, standards, policies, documents showing the work flow, performance criteria, case studies, business designs, archives (physical archive repositories and electronic archives), information about products and services, current situation evaluations/reports, employees' experiences, company culture, transformations within the company ... etc.


  • DÜNYANIN VE TÜRKİYE’ NİN DOĞAL GAZ TALEP SENARYOSU

    by Çetin İncekara

    Although the global energy demand varies from country to country, it is constantly increasing on a global scale. As per IEA’s projections, the usage of two energy sources will increase (renewable with 12% and natural gas with 28%) in the global energy demand until 2040. In the study, 48 number of experts/managers (Decision Makers-DM) working in the energy sector were interviewed to establish/determine 10 main criteria and 43 sub-criteria used in demand scenarios. In the study, fuzzy multi-objective mathematical model (by using fuzzy AHP, and fuzzy TOPSIS) is developed to calculate World's and Turkey’s natural gas demand under high and low demand scenarios. By the help of model, the usage of natural gas amount in World by regions between 2020 and 2030 is calculated. In Scenario-High it will increase by approx. 26 % between 2020 and 2030 and reached 4.800 bcm in 2040. In Scenario-Low it will increase by approx. 5 % from 2020 to 2030 and reached 4.000 bcm in 2030. It is the only fossil fuel expected to grow beyond 2030 since it is clean energy source. In Scenario-High natural gas demand by region is calculated/projected as follows: in 2030 North America 1250 bcm, Central and South America 250 bcm, Europe 650 bcm, Middle East 750 bcm, Eurasia 650 bcm, Asia Pacific 1250 bcm. In the study, under the high demand scenario it has been calculated that the usage of natural gas in Turkey will increase by 52% between 2020 and 2030 and reach approximately 76 bcm, and in the low demand scenario Turkey's total natural gas demand will decrease by approximately 9% and reach approximately 45 bcm. In the study by using Fuzzy TOPSIS method, 10 number of sectors are examined and “Energy sector” was the first and “Industry sector” was the second in the ranking of the sectors in terms of global and Turkey’s natural gas demand scenario. In the study, the usage of natural gas is the only fossil resource that is expected to increase in the global energy mix among fossil fuels in 2030. This is due to high reserve amount of natural gas, i.e. global conventional natural gas reserves with 206 trillion m3 and unconventional unexplored natural gas reserves with 354 trillion m3, and as well as being a clean and environmental-friendly energy source. Since it is a clean fossil fuel and it pollutes nature & air much less than other fossil fuels and has a minimum greenhouse gas emission amount compared to other fossil sources.

  • Post-COVID-19 ergonomic school furniture design under fuzzy logic

    by Cetin O. Incekara

    BACKGROUND: Because of wrong sitting position, children have back-pain and related musculoskeletal pain (MPD). Due to inappropriate designed class furniture by not taking into account the children’s anthropometric measurements have negative effect on children musculoskeletal systems. The impact of the COVID-19 pandemic crisis has changed the furniture industry’s production trends. OBJECTIVE: This study aimed to develop a new fuzzy based design of ergonomic-oriented classroom furniture for primary school students considering the measured anthropometric dimensions of students’ safety, health, well-being, i.e. ergonomic criteria, socio-psychological aspect and post-COVID policies. METHODS: In the study 2049 number of primary school students are assessed considering COVID-19 pandemic policies and their static anthropometric dimensions were measured between 7-10-year-old (between 1st-4th grade students) and descriptive statistics of children among their ages and genders are calculated; mean, standard deviation, percentiles. The data collected from the students were analyzed quantitatively by using Significance Analysis: Mann-Whitney U test statistic, t-test, Regression Analysis and one-way ANOVA. In the study interviews with experts are performed and fuzzy mathematical model (by using fuzzy-AHP, fuzzy-TOPSIS and fuzzy-VIKOR) is developed to calculate Turkey’s three schools’ furniture. RESULTS: Results showed statistically significant differences between two genders. And it is observed that the seating bench height is too high for primary school students and lower than the height of the classroom’s blackboard from the floor. Fuzzy Multi Criteria Decision Making Method’s (FMCDM) results show that primary school students’ ergonomic classroom furniture should be mainly designed by considering “COVID-19 Criteria”, “Ergonomic Criteria” and “Socio-Psychological Aspect”. Students’ existing seating benches and tables are changed by considering post-COVID policies/protocols, Ergonomic Criteria and Socio-Psychological Aspect. And a new seating bench/chair and table’s dimensions is proposed in the study. CONCLUSIONS: Children study at school for long periods and their activities involve long periods of time on their desks in schools. As per the results of the study, it can be concluded that school management must consider the genders, ages of students and take into account the post-COVID policies/protocols while procuring the classroom furniture. The COVID-19 pandemic is the single largest event to have affected children globally in their access to school in recent times; estimates suggest that over 85%of the world’s total enrolled learners, 1.5 billion children and youths, have been affected. The coronavirus pandemic also creates dramatic changes for the school furniture.


  • Open Access

    Enerji Sektöründe Faaliyet Gösteren Bir İşletmede İş Sağlığı ve Güvenliği Yönetim Sistemi

    by Çetin Önder İnCekara

    TTeknolojik gelişmeler sanayii sektöründe İş Sağlığı ve Güvenliği (İSG) Yönetim Sistemlerinin uygulamalarını artırmıştır. Bu kapsamda iş yerlerinde insana daha fazla değer vermeyi ve daha fazla İSG yatırımını gerekli kılmıştır. Endüstriyel tesislerde iş kazalarını, iş/meslek hastalıklarını önlemek amacıyla; işyerindeki olası risklerin belirlendiği, söz konusu riskleri kaldırmak için yasal yönetmeliklere/standartlara uyumlu uygulamaların yapıldığı, gerekli iş/işbaşı İSG eğitimlerinin verilip uygulandığı, kontrol edildiği, iş yerinde acil eylem planlarının hazır olduğu, performansın izlendiği, düzeltici/iyileştirme faaliyetleri ile sürekli iyileştirme faaliyetlerinin yapıldığı, İSG faaliyetlerinin denetlendiği, gözden geçirildiği, sürekli iyileştirme yaklaşımı içerisinde olan bütün İSG çalışmalarının belli bir sistematik içinde dokümante edildiği bir İSG Yönetim Sistemi olan OHSAS 18001 uygulanmaktadır. Dünyada endüstriyel tesislerde en yaygın kullanılan/uygulanan standartlardan biri OHSAS 18001’dir. OHSAS 18001 uygulamaları ile tesislerde İSG riskleri sistematik yaklaşımla sürekli izlenerek azaltılmakta, performans göstergeleri/ölçümleri ve çalışanların aktif katılımı ile iş riskleri kontrol altına alınarak, izlenmekte ve iyileştirmeler yapılmaktadır. Çalışmada endüstriyel tesislerdeki OHSAS 18001 uygulamaları ve dikkat edilmesi gereken hususlar/adımlar tanımlanmış, tanımlanan adımlar kapsamında ülkemizdeki uluslararası bir enerji tesisinin İSG yönetim sistemleri uygulamaları değerlendirilmiştir. Tesiste kaza risklerini düşürmek için Karar Vericilerle (KV) görüşülmüş; alınması gereken eylemler, alınması gereken ilave tedbirler için çok kriterli karar verme (ÇKKV) yöntemlerinden Analitik Hiyerarşi Prosesinden (AHP) ve TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) yöntemlerinden faydalanılmıştır.