Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jhon Jairo Rios Acevedo has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Rheological, Thermal and Mechanical Properties of Blown Film Based on Starch and Clay Nanocomposites

    by Heidy Tatiana Criollo Guevara, Lis Vanesa Ocoró Caicedo, Jhon Jairo Rios Acevedo, Marcelo Alexander Guancha Chalapud, Carolina Caicedo

    Growing concern over the environmental impact of conventional plastics has driven the development of biodegradable alternatives. In this context, natural polymers such as starch have emerged as sustainable options. Commercial montmorillonite, implemented as a reference nanomaterial, allows for the enhancement of the properties of biodegradable materials. In this study, commercial cassava starch powder plasticized with water and 35% glycerol, along with commercial nanoclay at concentrations of 0%, 2%, and 4%, was used as film reinforcement. The manufacturing process employed extrusion to evaluate the effectiveness of the nanomaterial in improving the mechanical and functional characteristics of the films. Films with varying concentrations of glycerol and nanoclay were produced to determine the optimal formulation by assessing their rheological, thermal, and mechanical properties. These films were subjected to comprehensive analysis using internationally standardised techniques, including Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), and morphological characterisation via Scanning Electron Microscopy (SEM). Among the properties evaluated, water vapour permeability (WVTR) was of particular interest. Results showed that higher nanoclay content improved moisture retention, thus enhancing the films’ water barrier properties. Mechanical testing indicated that the film with the highest nanoclay concentration, F-g35-NC4, displayed tensile strength values of 0.23 ± 0.02 MPa and elongation of 66.90% ± 4.85, whereas F-g35-NC0 and F-g35-NC2 exhibited lower values. Conversely, the highest tear resistance was also recorded for F-g35-NC4, reaching 0.740 ± 0.009 kg. Contact angle measurements revealed a hydrophilic tendency, with values of 89.93° ± 8.78°. Finally, WVTR analysis confirmed that increased nanoclay content enhanced moisture retention and improved the water barrier performance, with a value of 0.030 ± 0.011 g/m2·day, supporting potential applications in the packaging sector.


  • Open Access

    Rheological, Thermal and Mechanical Properties of Blown Film Based on Starch and Clay Nanocomposites

    by Heidy Tatiana Criollo Guevara, Lis Vanesa Ocoró Caicedo, Jhon Jairo Rios Acevedo, Marcelo Alexander Guancha Chalapud, Carolina Caicedo

    Growing concern about the environmental impact of conventional plastics has driven the need to roll out biodegradable plastic materials. In this context, natural polymers, such as starch, emerge as sustainable alternatives. The commercial Montmorillonite implemented as a nanomaterial of reference, allows you to improve the properties of biodegradable materials. In this study, commercial Cassava foil was used, laminated with water and glycerol 35%, and reinforced with commercial clay at 2% and 4% for film retention. The manufacturing process included the extrusion technique, which allowed to evaluate the effectiveness of the reference to improve the mechanical and functional characteristics of the produced films. If three films were rolled starting from the commercial yuca medium, the optimal concentration of different glycerol concentrations for the process was deter-mined, evaluating their thermal and theoretical properties. These films were subjected to exhaustive analysis using international normalized techniques, thermogravimetric analysis (TGA), differential barrio calorimetry (DSC) and infrared spectroscopy with Fourier transform (FTIR) and morphological analysis using scanning electron microscopy (SEM). The aspects evaluated include water vapor permeability (WVTR). The results showed that a higher content of arc in the films favored moisture retention, which, more often than not, increased the barrier properties. According to the results obtained from the mechanical tests, the film with higher arc concentration F-g35-NC4 obtained tensile strength values of 0.23 ± 0.02 MPa and a 66.90 ± 4.85% deformation between those F-g35-NC0 and F-g35-NC2 will obtain lower values than the properties evaluated. Furthermore, it was observed in the determination of the contact and angle with values 89.93° ± 8.78 of 0.740 kg ± 0.009 kg. Finally, I obtained a film with a water vapor barrier of 0.003 g/m2.day ± 0.011, which allows me to project applications in the packaging sector.

  • Open Access

    Efficacy of Vaporized Hydrogen Peroxide Combined with Silver Ions against Multidrug-Resistant Gram-Negative and Gram-Positive Clinical Isolates

    by Sandra Patricia Rivera-Sánchez, José María Rojas-Abadía, John Jairo Ríos-Acevedo, Ana Fernanda Mejía-Hurtado, Luz Natalia Espinosa-Moya, Iván Darío Ocampo-Ibáñez

    Antimicrobial resistance (AMR) is a serious public health problem that results in high morbidity and mortality rates. In particular, multidrug-resistant (MDR) strains circulating in hospital settings pose a major threat as they are associated with serious nosocomial infections. Therefore, regular cleaning and disinfection procedures, usually using chemical disinfectants, must be implemented in these facilities. Hydrogen peroxide (HP)-based disinfectants have proven high microbicidal activity and several comparative advantages over conventional disinfectants. We assessed the in vitro biocidal activity of an 8% HP solution combined with 30 mg/L silver ions (HP + Ag) against MDR clinical isolates of Klebsiella pneumoniae (MDRKp) and Pseudomonas aeruginosa (MDRPa), and methicillin-resistant Staphylococcus aureus (MRSA). Accordingly, the in vitro antibacterial activity was determined using the macrodilution method, and the efficacy was determined for 30 min in terms of (1) activity on bacteria in suspension and (2) activity on surfaces using vaporized HP + Ag on a 20 cm2 stainless steel surface. A strong bactericidal effect of HP + Ag was observed against MDRKp, MDRPa, and MRSA strains, with minimum inhibitory concentrations and minimum bactericidal concentrations between 362.5 and 5800 mg/L. A strong effect was observed during the 30 min of HP + Ag exposure to the resistant clinical isolates, with over 4-Log10 reduction in CFUs. Regarding the efficacy of the disinfectant on surfaces, bacterial load reductions of >99% were observed. These results suggest that HP + Ag is potentially useful as an effective disinfectant for decontaminating surfaces in hospital settings suspected of contamination with MDR bacteria.


  • Open Access

    Alternative Ecosorbent for the Determination of Trihalomethanes in Aqueous Samples in SPME Mode

    by Gustavo Sánchez-Duque, Juan José Lozada-Castro, Emerson Luis Yoshio Hara, Marco Tadeu Grassi, Milton Rosero-Moreano, Jhon Jairo Ríos-Acevedo

    A new sorbent material based on modified clay with ionic liquid immobilized into an agarose film was developed as part of this study. It was applied to determine organochlorine pollutants, like disinfection byproducts, through headspace solid-phase microextraction-gas chromatography-electron capture detection (HS-SPME-GC-ECD). The disinfection byproducts determined in this study were used as model molecules because they were volatile compounds, with proven severe effects on human health. Their presence in aquatic environments is in trace concentrations (from pg L−1 to mg L−1). They are classified as emergent pollutants and their determination is a challenge for analytical chemists. The parameters which affected the extraction efficiency, i.e., number and distance between SPME discs, salt concentration, the temperature of extraction, extraction time, and desorption time, were optimized. A wide linear dynamic range of 10–1000 ng mL−1 and coefficients of determination better than 0.997 were achieved. The limits of detection and the limits of quantitation were found in the ranges of (1.7–3.7) ng mL−1 and (5.6–9.9) ng mL−1, respectively. The precision, expressed as relative standard deviation (RSD), was better than 8%. The developed sorbent exhibits good adsorption affinity. The applicability of the proposed methodology for the analysis of trihalomethanes in environmental and water samples showed recoveries in the range of 86–95%. Finally, the newly created method fully complied with the principles of green chemistry. Due to the fact that the sorbent holder was made of agarose, which is a wholly biodegradable material, sorbent clay is a widespread material in nature. Moreover, the reagents intercalated into the montmorillonite are new green solvents, and during the whole procedure, low amounts of organic solvents were used.


  • Open Access

    Green method to determine triazine pesticides in water using Rotating Disk Sorptive Extraction (RDSE)

    by Edouard Velasco, Jhon Jairo Ríos-Acevedo, Rodrigo Sarria-Villa, Milton Rosero-Moreano


  • Open Access

    Notas de química analítica con prácticas de laboratorio

    by Universidad Santiago de Cali, Jhon Jairo Rios Acevedo, Sandra Patricia Castro Narváez

    El propósito de este libro es la publicación de las prácticas de laboratorio en química analítica por métodos clásico. El documento ofrece un texto de consulta con notas sobre temas generales de estadística, equilibrio químico, gravimetría y titulaciones, que será de gran aplicación no solo para estudiantes de Química, sino también, para estudiantes de áreas afines como Microbiología, Química Farmacéutica, Bioquímica, entre otros. Este texto entrega, a estudiantes y profesores, material teórico y práctico para el estudio y análisis de la química analítica clásica. Además, fomenta la adquisición de competencias propias de los conceptos, habilidad del trabajo colaborativo, capacidad para resolver problemas y pensamiento crítico, desde métodos relacionados con las ciencias experimentales. De igual manera, estimula la aplicación de buenas prácticas de laboratorio, tales como: normas de seguridad, el acertado uso de sustancias e instrumentos y disposición o tratamiento de residuos generados.