FGFrancisco Galvez

Francisco Galvez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francisco Galvez has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Progression from failure to collapse of two-way spanning URM walls studied using DEM parametric dynamic analysis

    by Francisco Galvez, Jaroslav Vaculik, Luigi Sorrentino, Dmytro Dizhur, Jason M. Ingham


  • Open Access

    Adjacent interacting masonry structures: shake table test blind prediction discrete element method simulation

    by F. Galvez, D. Dizhur, J. M. Ingham

    This study presents the numerical simulation of a shake table experimental earthquake campaign of a building aggregate composed of two adjacent unreinforced rubble stone masonry buildings. The experimental testing was performed with the purpose of studying the interaction between a single-storey and a two-storey building connected with a dry joint consisting of a smooth mortared surface. Before performing the experimental testing, various research teams were sent the construction details to participate in a blind prediction competition using different prediction strategies. The approach reported herein to simulate the shake table tests is the discrete element method (DEM) with rigid elements and damage and deformation lumped in inter-block joints that represent the mortar interfaces governed by a non-linear Mohr–Coulomb constitutive laws. The material properties implemented in the model after calibrating using piers shear tests was observed unrealistically stiff. Hence, it was reduced based on the outcome of pushover and eigenvalue analyses. A sequence of earthquakes with incremental acceleration was input to the real and numerical models. Numerical overestimation of damage and displacement was observed probably due to underestimating the damping ratio. Unexpected sliding of the single-storey building occurred at early stages of the simulation. However, the overall behaviour in terms of base shear force, building displacement and damage progression was well captured in the DEM model. The in-plane flexural and rocking mechanism in the two-storey building was correctly simulated. Damage at the interface between the two buildings with separation and pounding was also reasonably well predicted.


  • Open Access

    Seismic rocking simulation of unreinforced masonry parapets and façades using the discrete element method

    by Francisco Galvez, Luigi Sorrentino, Dmytro Dizhur, Jason M. Ingham

    When subjected to high‐intensity out‐of‐plane seismic loading that results in the threshold value of static stability being exceeded, unreinforced masonry parapets and façades form mechanisms that exhibit rigid body rocking motion before collapse. The discrete element method was used to perform rocking simulations which were compared to experimental observations and analytical models to obtain relationships that enable the stiffness proportional Rayleigh damping parameter (β) to be estimated from the coefficient of restitution. The seismic performance of parapets and façades was compared using incremental dynamic analysis, and similar performance was observed between the compared models, confirming the validity of the developed expressions to obtain β. The gap size generated after failure between the façade and the return wall was parametrized and the outcome revealed the hazardous situation that arises when the connectivity between the uncollapsed façade and the adjacent return walls is damaged during an earthquake. Pulse‐like accelerations, generally associated with near‐fault earthquakes, caused collapse of parapets and façades at substantially lower accelerations when compared to earthquakes with oscillations that were evenly distributed in time. It was concluded that when assessing the seismic vulnerability of a rocking façade located near a fault, a capacity equal to that of a free‐standing block should be used, validating the assumption made in some seismic assessment guidelines of not considering the effect of return walls when assessing the façade capacity. For façades located far from a fault a range of earthquakes that represent the site conditions needs to be included in any dynamic capacity assessment.


  • Open Access

    Damping considerations for rocking block dynamics using the discrete element method

    by Francisco Galvez, Luigi Sorrentino, Dmytro Dizhur, Jason M. Ingham

    It is well established that unreinforced masonry (URM) buildings develop damage‐forming collapse mechanisms during high‐intensity earthquakes, with these mechanisms exhibiting large rocking displacements before collapsing. The Discrete Element Method (DEM) of analysis can realistically capture phenomena that involve large movements of elements, resulting in the technique being ideal for simulating the collapse of URM building elements. Consequently, extensive research using DEM to analyse the seismic response of URM buildings and building components has recently been published. However, the variety of reported damping approaches that have apparently led to DEM results that successfully replicate physical observations underscores the need for consistent guidance related to the assignment of damping factors. The Rayleigh damping distribution model implemented in the DEM software 3DEC was used to study the differences between mass proportional (MP) and stiffness proportional (SP) damping configurations. After reviewing phenomena that need to be damped and previous works where damping was implemented, the capabilities and drawbacks of the time‐efficient MP damping configuration were studied and the results compared to simulations with SP damping. When considering numerical simulations that incorporated MP damping and led to results that were seemingly well‐matched to experimental tests, it was found that the apparent robustness of decisions pertaining to the adopted input parameters was deceptive in most cases. Consequently, SP damping was recommended for all DEM rocking simulations, even though MP damping could be used with satisfactory accuracy in certain situations discussed herein. A pragmatic relationship between both damping strategies was proposed.


  • Using DEM to Investigate Boundary Conditions for Rocking URM Facades Subjected to Earthquake Motion

    by Francisco Galvez, Luigi Sorrentino, Dmytro Dizhur, Jason M. Ingham

    Façade overturning is a frequently observed collapse mechanism occurring in unreinforced masonry (URM) buildings during high-intensity, earthquake-induced shaking. Following complete separation from a building, the rocking motion of a URM façade and the associated impact against the return walls are the factors that continue to contribute to the façade out-of-plane capacity. Seismic vulnerability studies of URM façades have historically neglected the interaction between building earthquake response and the rocking response of the façade, whereas in the study reported herein this interaction was analyzed using the discrete element modeling (DEM) approach, resulting in a façade out-of-plane capacity reduction. The increment in the dynamic rocking capacity caused by the frictional connection between the URM façade and the building was also analyzed and is reported.