Yanqiu Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanqiu Cheng has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Chen Ma
Department of Traffic Engineering, College of Transportation Engineering, Chang’an University, Xi’an, Shaanxi, China
6 shared publicationsKuanmin Chen
Department of Traffic Engineering, College of Transportation Engineering, Chang’an University, Xi’an, Shaanxi, China
6 shared publicationsShuang Zhang
Department of Traffic Engineering, College of Transportation Engineering, Chang’an University, Xi’an, Shaanxi, China
4 shared publications- Jie Wei
Department of Traffic Engineering, College of Transportation Engineering, Chang’an University, Xi’an, Shaanxi, China
3 shared publications - Xianbiao Hu
The Pennsylvania State University
3 shared publications - Lexing Zhang
Department of Traffic Engineering, College of Transportation Engineering, Chang’an University, Xi’an, Shaanxi, China
2 shared publications
Latest Publications
- 9 October 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2680 (1) , 324-347
From Lockdown to Recovery: Modeling the Long-Term Effects of COVID-19 on Station-Level Ridership of Xi’an Metro
The outbreak of COVID-19 and the lockdown policies led to a significant reduction in metro ridership, which gradually recovered during the reopening phase. However, how different COVID-19 policies affected ridership over time and how ridership has recovered during the post-pandemic period remain unclear. Understanding these impacts and recovery patterns is valuable for analyzing policy effectiveness in similar future situations. A panel dataset covering the full cycle of the COVID-19 pandemic (from January 2019 to September 2023) was collected for Xi’an, China. Multiple panel econometric models were constructed to measure the long-term impact of various determinants (i.e., building environment, socio-economics, transportation accessibility, and pandemic-related policies) on metro ridership. The results reveal that supply-side intervention (station closure) has the strongest negative impacts, followed by comprehensive lockdown restricting large-scale mobility, while restrictions targeting public places and school closures have relatively smaller effects. This reflects the stability of demand for essential trips during this period. Following the lifting of pandemic control measures, ridership exhibits a recovery pattern characterized by initial slow growth, followed by an accelerated recovery, ultimately reaching pre-pandemic levels. Meanwhile, the increased accessibility from network expansion is associated with decreased ridership at existing stations, as stations on existing lines are more likely to experience ridership diversion to new nearer stations. Despite this diversion effect, the recovery to pre-pandemic levels suggests particularly strong underlying recovery momentum. Moreover, individual travel decisions are primarily driven by health risk assessments rather than economic incentives. These findings provide empirical support for future transportation management and decision-making in response to similar public health events.
- 9 October 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2680 (1) , 324-347
From Lockdown to Recovery: Modeling the Long-Term Effects of COVID-19 on Station-Level Ridership of Xi’an Metro
The outbreak of COVID-19 and the lockdown policies led to a significant reduction in metro ridership, which gradually recovered during the reopening phase. However, how different COVID-19 policies affected ridership over time and how ridership has recovered during the post-pandemic period remain unclear. Understanding these impacts and recovery patterns is valuable for analyzing policy effectiveness in similar future situations. A panel dataset covering the full cycle of the COVID-19 pandemic (from January 2019 to September 2023) was collected for Xi’an, China. Multiple panel econometric models were constructed to measure the long-term impact of various determinants (i.e., building environment, socio-economics, transportation accessibility, and pandemic-related policies) on metro ridership. The results reveal that supply-side intervention (station closure) has the strongest negative impacts, followed by comprehensive lockdown restricting large-scale mobility, while restrictions targeting public places and school closures have relatively smaller effects. This reflects the stability of demand for essential trips during this period. Following the lifting of pandemic control measures, ridership exhibits a recovery pattern characterized by initial slow growth, followed by an accelerated recovery, ultimately reaching pre-pandemic levels. Meanwhile, the increased accessibility from network expansion is associated with decreased ridership at existing stations, as stations on existing lines are more likely to experience ridership diversion to new nearer stations. Despite this diversion effect, the recovery to pre-pandemic levels suggests particularly strong underlying recovery momentum. Moreover, individual travel decisions are primarily driven by health risk assessments rather than economic incentives. These findings provide empirical support for future transportation management and decision-making in response to similar public health events.
- 6 September 2025
- Published by Taylor & Francis in Transportmetrica A: Transport Science
- p. 1-37
Identifying expressway network bottlenecks using iterative spectral bisection and OD detour degree
- 6 September 2025
- Published by Taylor & Francis in Transportmetrica A: Transport Science
- p. 1-37
Identifying expressway network bottlenecks using iterative spectral bisection and OD detour degree
- 30 March 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2679 (6) , 69-85
Development of a Surrogate Safety Measure for Evaluating Rear-End Collision Risk Perception
Surrogate safety measures are widely used in advanced driver assistance systems (ADASs) to detect traffic conflict and evaluate risk levels in car-following scenarios. However, the integration of driving style into surrogate safety measures has not been thoroughly investigated. To enhance the reliability and user satisfaction of ADASs, this study introduces a surrogate safety measure, risk deceleration (RD), to describe drivers’ risk perception and decision-making process in the car-following process. The parameters of RD are calibrated using a genetic algorithm to better reflect individual driving styles. The effectiveness of RD in identifying perceived risk in severe deceleration scenarios is tested and evaluated using vehicle trajectories representing three different risk levels. The evaluation framework includes classification performance metrics, timeliness, and alignment with driver behavior. Results show that RD outperforms the safety margin and deceleration rate to avoid crash across the evaluation framework and for all four vehicle type combinations. Furthermore, the calibrated reaction time value significantly enhances prediction performance. In addition, RD effectively characterizes drivers’ behavior and perceived risk levels during severe deceleration processes. Moreover, RD shows considerable potential for integration into collision warning systems, which can enhance driver satisfaction and compliance.
- 30 March 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2679 (6) , 69-85
Development of a Surrogate Safety Measure for Evaluating Rear-End Collision Risk Perception
Surrogate safety measures are widely used in advanced driver assistance systems (ADASs) to detect traffic conflict and evaluate risk levels in car-following scenarios. However, the integration of driving style into surrogate safety measures has not been thoroughly investigated. To enhance the reliability and user satisfaction of ADASs, this study introduces a surrogate safety measure, risk deceleration (RD), to describe drivers’ risk perception and decision-making process in the car-following process. The parameters of RD are calibrated using a genetic algorithm to better reflect individual driving styles. The effectiveness of RD in identifying perceived risk in severe deceleration scenarios is tested and evaluated using vehicle trajectories representing three different risk levels. The evaluation framework includes classification performance metrics, timeliness, and alignment with driver behavior. Results show that RD outperforms the safety margin and deceleration rate to avoid crash across the evaluation framework and for all four vehicle type combinations. Furthermore, the calibrated reaction time value significantly enhances prediction performance. In addition, RD effectively characterizes drivers’ behavior and perceived risk levels during severe deceleration processes. Moreover, RD shows considerable potential for integration into collision warning systems, which can enhance driver satisfaction and compliance.
- 8 January 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (8) , 549-569
Hub Node Identification in Urban Rail Transit Network Evolution Using a Ridership-Weighted Network
With the development of the urban rail transit network (URTN), the network structure and performance have changed, and the node importance has also been redistributed. However, little research has been done on how hub nodes change as the network develops over a lengthy period. Moreover, most hub node identification methods only focus on the analysis of topological networks or single-dimension measurements, resulting in inaccurate identification results. To overcome the above limitations, a novel method of hub node identification is proposed. Based on the ridership-weighted network model, the node centrality and reliability are aggregated to quantify the weighted comprehensive importance of the nodes. Furthermore, network invulnerability measurement is used to demonstrate the effectiveness of the proposed method. This method is applied to the Xi’an Urban Rail Transit Network (XURTN) from 2011 to 2021. With the XURTN’s development, its connectivity, balance, and fault tolerance have improved. After the basic network skeleton was formed, the number and proportion of hub nodes increased steadily. By comparing the spatial characteristics of the identified hub nodes over two successive periods, it can be found that the evolution direction of the hub nodes is correlated with the type of new lines and coincides also with the development direction of the urban area. In addition, the node orders of the proposed method have a greater impact on the network vulnerability, in which the network-weighted efficiency E w decreases faster and more dramatically, that is, 1.17%–45.75% more than that of other methods. Overall, this study provides a basis for the URTN and station planning and management.
- 8 January 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (8) , 549-569
Hub Node Identification in Urban Rail Transit Network Evolution Using a Ridership-Weighted Network
With the development of the urban rail transit network (URTN), the network structure and performance have changed, and the node importance has also been redistributed. However, little research has been done on how hub nodes change as the network develops over a lengthy period. Moreover, most hub node identification methods only focus on the analysis of topological networks or single-dimension measurements, resulting in inaccurate identification results. To overcome the above limitations, a novel method of hub node identification is proposed. Based on the ridership-weighted network model, the node centrality and reliability are aggregated to quantify the weighted comprehensive importance of the nodes. Furthermore, network invulnerability measurement is used to demonstrate the effectiveness of the proposed method. This method is applied to the Xi’an Urban Rail Transit Network (XURTN) from 2011 to 2021. With the XURTN’s development, its connectivity, balance, and fault tolerance have improved. After the basic network skeleton was formed, the number and proportion of hub nodes increased steadily. By comparing the spatial characteristics of the identified hub nodes over two successive periods, it can be found that the evolution direction of the hub nodes is correlated with the type of new lines and coincides also with the development direction of the urban area. In addition, the node orders of the proposed method have a greater impact on the network vulnerability, in which the network-weighted efficiency E w decreases faster and more dramatically, that is, 1.17%–45.75% more than that of other methods. Overall, this study provides a basis for the URTN and station planning and management.
- 19 August 2023
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (5) , 397-415
Catchment-Area Delineation Approach Considering Travel Purposes for Station-Level Ridership Prediction Task
Station-catchment-area delineation is a key component of direct ridership models for urban rail-transport systems as it can determine the relationship between the urban-rail-transit station-level ridership and the variables within the station catchment area. The neglect of differences in the passenger-flow distribution for different travel purposes in previous studies has led to low accuracy of the obtained walk-to-station distances. Therefore, this paper proposes a station-catchment-area delineation method which is based on web map data to obtain accurate walk-to-station distances and considers differences in the distance thresholds and the ridership attraction intensity (RAI) for six travel purposes (corresponding to commercial, medical, residential, educational, administrative, and recreational land uses). In the case study, the ridership data of Xi’an Metro, the 2015 Xi’an Residential Travel Survey data, and the corresponding Gaode Map data are employed to extract passengers’ walking-distance distribution for several travel purposes to delineate the station catchment areas and build direct ridership models. Several geographically weighted regression (GWR) models are constructed to evaluate and examine the effects of the various station-catchment-area delineation methods on the model findings. The obtained results show that the proposed station-catchment-area delineation method significantly improves the ridership prediction performance compared with the traditional circular-buffer method, with the entry and exit ridership prediction accuracy improving by 3.57% and 6.65% on average, respectively. Finally, this study will guide transportation planners on how to delineate station catchment areas when constructing direct-demand models for urban rail stations.
- 19 August 2023
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (5) , 397-415
Catchment-Area Delineation Approach Considering Travel Purposes for Station-Level Ridership Prediction Task
Station-catchment-area delineation is a key component of direct ridership models for urban rail-transport systems as it can determine the relationship between the urban-rail-transit station-level ridership and the variables within the station catchment area. The neglect of differences in the passenger-flow distribution for different travel purposes in previous studies has led to low accuracy of the obtained walk-to-station distances. Therefore, this paper proposes a station-catchment-area delineation method which is based on web map data to obtain accurate walk-to-station distances and considers differences in the distance thresholds and the ridership attraction intensity (RAI) for six travel purposes (corresponding to commercial, medical, residential, educational, administrative, and recreational land uses). In the case study, the ridership data of Xi’an Metro, the 2015 Xi’an Residential Travel Survey data, and the corresponding Gaode Map data are employed to extract passengers’ walking-distance distribution for several travel purposes to delineate the station catchment areas and build direct ridership models. Several geographically weighted regression (GWR) models are constructed to evaluate and examine the effects of the various station-catchment-area delineation methods on the model findings. The obtained results show that the proposed station-catchment-area delineation method significantly improves the ridership prediction performance compared with the traditional circular-buffer method, with the entry and exit ridership prediction accuracy improving by 3.57% and 6.65% on average, respectively. Finally, this study will guide transportation planners on how to delineate station catchment areas when constructing direct-demand models for urban rail stations.
- 22 May 2023
- Published by Elsevier in Journal of Safety Research
- Vol. 86, 148-163
The impact of non-driving related tasks on the development of driver sleepiness and takeover performances in prolonged automated driving
- 22 May 2023
- Published by Elsevier in Journal of Safety Research
- Vol. 86, 148-163
The impact of non-driving related tasks on the development of driver sleepiness and takeover performances in prolonged automated driving
- 24 April 2023
- Published by Taylor & Francis in Transportmetrica A: Transport Science
- Vol. 20 (3)
A general metro timetable rescheduling approach for the minimisation of the capacity loss after random line disruption
This study proposes a generic metro timetable rescheduling method for the minimization of the capacity loss that integrates spatial and temporal information on random line disruptions and time-varying characteristics of passenger flows. The proposed emergency operating rules can be immediately deployed after a random disruption using one crossover track. The spatiotemporal information of a disruption and the current state of the line are integrated into a metro disruption management (MDM) model, which considers deviated from the original schedule and the number of stranded passengers as optimization objectives. An iterative meta-heuristic for the general metro rescheduling (IMH-GMR) algorithm is developed to flexibly classify an accident and determine rescheduling solutions for the MDM model within an effective running time (e.g., 15-60 sec). Test results show that the line capacity loss is significantly reduced (94.95%) compared with the total loss caused by the accident disposal in the test scenario.
- 24 April 2023
- Published by Taylor & Francis in Transportmetrica A: Transport Science
- Vol. 20 (3)
A general metro timetable rescheduling approach for the minimisation of the capacity loss after random line disruption
This study proposes a generic metro timetable rescheduling method for the minimization of the capacity loss that integrates spatial and temporal information on random line disruptions and time-varying characteristics of passenger flows. The proposed emergency operating rules can be immediately deployed after a random disruption using one crossover track. The spatiotemporal information of a disruption and the current state of the line are integrated into a metro disruption management (MDM) model, which considers deviated from the original schedule and the number of stranded passengers as optimization objectives. An iterative meta-heuristic for the general metro rescheduling (IMH-GMR) algorithm is developed to flexibly classify an accident and determine rescheduling solutions for the MDM model within an effective running time (e.g., 15-60 sec). Test results show that the line capacity loss is significantly reduced (94.95%) compared with the total loss caused by the accident disposal in the test scenario.
- 1 January 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part A: Systems
- Vol. 149 (1) , 04022119
Last Train Rapid Synchronizing Approach for Maximum OD Accessibility with Passengers’ Effective Travel Route
During the last train period, passengers will not successfully reach their destination if the timetables of the various transfer station lines are not coordinated. This paper proposes a general model to optimize the last train timetables of urban rail networks and maximize origin-destination (OD) accessibility for metro networks during the last train period. By using a generalized cost function, all transportation activities involved in an urban rail network are effectively described, and a generalized cost function is established for the last train as a criterion for its accessibility. A mixed-integer programming model that pays more attention to passengers’ effective travel routes and accessibility of the entire OD route is proposed. A genetic algorithm combined with a -shortest path algorithm is developed to calculate a rescheduling solution within a satisfactory running time (e.g., 35 min). Finally, comparative experiments are conducted using the Xi’an urban rail network as a case study. The results show that the objective function of OD accessibility is more favorable to last train passengers than to the number of successful transfer passengers at transfer stations. This increases the number of passengers successfully arriving at their destination by 12.03%. The proposed methodology assist in cost-effective coordination of the last train timetables and make accurate recommendations to improve passenger OD accessibility using information guidance.- 1 January 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part A: Systems
- Vol. 149 (1) , 04022119
Last Train Rapid Synchronizing Approach for Maximum OD Accessibility with Passengers’ Effective Travel Route
During the last train period, passengers will not successfully reach their destination if the timetables of the various transfer station lines are not coordinated. This paper proposes a general model to optimize the last train timetables of urban rail networks and maximize origin-destination (OD) accessibility for metro networks during the last train period. By using a generalized cost function, all transportation activities involved in an urban rail network are effectively described, and a generalized cost function is established for the last train as a criterion for its accessibility. A mixed-integer programming model that pays more attention to passengers’ effective travel routes and accessibility of the entire OD route is proposed. A genetic algorithm combined with a -shortest path algorithm is developed to calculate a rescheduling solution within a satisfactory running time (e.g., 35 min). Finally, comparative experiments are conducted using the Xi’an urban rail network as a case study. The results show that the objective function of OD accessibility is more favorable to last train passengers than to the number of successful transfer passengers at transfer stations. This increases the number of passengers successfully arriving at their destination by 12.03%. The proposed methodology assist in cost-effective coordination of the last train timetables and make accurate recommendations to improve passenger OD accessibility using information guidance.- 14 February 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (6) , 549-564
Nonlinear Model-Based Subway Station-Level Peak-Hour Ridership Estimation Approach in the Context of Peak Deviation
Existing techniques for estimation of subway station-level long-term peak-hour ridership (PHR) may produce underestimated PHR values that may result in stations being designed with insufficient capacity during the planning stage; this in turn may increase congestion on the platforms in actual operation. One of the reasons for this potential undesirable outcome is that peak deviation phenomena often arise between stations and lines in subway systems, which could create underestimated PHR values. The default assumption has always been that the peak hour of passenger flow of each station always overlaps with its attributed line. This paper presents a framework of a station-level long-term PHR estimation method calibrated using the peak deviation coefficient (PDC) and a nonlinear model (eXtreme Gradient Boosting). This approach can estimate the PDC values for PHR prediction, and can also quantify the relative importance of PDC associated factors, yielding an explanation of the main causes of peak deviation phenomena. Using a real-world, large-scale passenger flow dataset from Xi’an, China, the approach produces more stable and accurate predictive performance compared with conventional methods (i.e., absolute percentage error controlled within 20% versus 50%, and mean average percentage error reduced by 3.26%–8.35%). Meanwhile, it is found that the relative importance of the unimproved land use ratio ranks in the top four for all types of peak periods; this ratio is a key factor that may be used to mitigate ridership deviations between stations and line peaks. In addition, for subway networks, the influence of land use entropy increases from the morning peak hour to the evening peak hour and weakens across the route from origin to destination.
- 14 February 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (6) , 549-564
Nonlinear Model-Based Subway Station-Level Peak-Hour Ridership Estimation Approach in the Context of Peak Deviation
Existing techniques for estimation of subway station-level long-term peak-hour ridership (PHR) may produce underestimated PHR values that may result in stations being designed with insufficient capacity during the planning stage; this in turn may increase congestion on the platforms in actual operation. One of the reasons for this potential undesirable outcome is that peak deviation phenomena often arise between stations and lines in subway systems, which could create underestimated PHR values. The default assumption has always been that the peak hour of passenger flow of each station always overlaps with its attributed line. This paper presents a framework of a station-level long-term PHR estimation method calibrated using the peak deviation coefficient (PDC) and a nonlinear model (eXtreme Gradient Boosting). This approach can estimate the PDC values for PHR prediction, and can also quantify the relative importance of PDC associated factors, yielding an explanation of the main causes of peak deviation phenomena. Using a real-world, large-scale passenger flow dataset from Xi’an, China, the approach produces more stable and accurate predictive performance compared with conventional methods (i.e., absolute percentage error controlled within 20% versus 50%, and mean average percentage error reduced by 3.26%–8.35%). Meanwhile, it is found that the relative importance of the unimproved land use ratio ranks in the top four for all types of peak periods; this ratio is a key factor that may be used to mitigate ridership deviations between stations and line peaks. In addition, for subway networks, the influence of land use entropy increases from the morning peak hour to the evening peak hour and weakens across the route from origin to destination.