Jian Shi
Research Subjects
Jian Shi has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Shuxun Zhou
Exploration and Development, Research Institute of PetroChina Changqing Oilfield Company, Xi’an, China
2 shared publicationsYan Zhou
CNPC Logging Applied Research Institute, Xi’an, China
2 shared publications- Aibin Zhao
PetroChina Changqing Oilfield Campany Oilfield Development Division, Xi’an, China
1 shared publication - Chong Wang
PetroChina Changqing Oilfield Company
1 shared publication - Dazhong Ren
Shaanxi Key Laboratory of Advanced Stimulation Technology for Oil&Gas Reservoirs, College of Petroleum Engineering, Xi'an Shiyou University, Xi'an, 710065, China
1 shared publication Gao Zhanwu
National Engineering Laboratory for Exploration and Development of Low-Permeability Oil & Gas Fields, Xi’an Shaanxi, China
1 shared publication
Latest Publications
- Open Access
- 4 October 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (10) , 588
Pore Space Characteristics and Migration Changes in Hydrocarbons in Shale Reservoir
The pore structure and mineral characteristics affect the accumulation and migration of hydrocarbons in shale, which determines the production capacity of shale oil. In this study, shale samples from the Chang 7 member of the Ordos Basin in China were selected to investigate the pore space characteristics, the effect of hydrocarbon accumulation on pore heterogeneity, and the hydrocarbon migration changes based on fractal theory, and a series of experiments were conducted involving X-ray diffraction (XRD), total organic carbon (TOC), Soxhlet extraction, and low-temperature nitrogen (N2) and carbon dioxide (CO2) adsorption. Then, the factors affecting extraction efficiency in shale pores were discussed. The interparticle pores contributed most to the accumulation of shale oil, and the organic matter (OM) pores contributed positively to the adsorption of hydrocarbons. The accumulation of hydrocarbons in the pore space did not increase the heterogeneity of the shale pore structure. The contents, states, and positions of hydrocarbons changed during the extraction process. Hydrocarbons were redistributed on the pore surface after Soxhlet extraction, and the heterogeneity of hydrocarbon adsorption and pore surface roughness were improved. Some heavy hydrocarbons and adsorbed components were pyrolyzed, resulting in the gradual escape of the adsorbed layer in the large pores. However, the free oil in the small pores diffused to the large pores and reaggregated on the surface, restoring a stable adsorption layer. The extraction rate was closely related to the pore throat structure and the wettability of mineral surfaces. The configuration between pores and throats had a crucial influence on the extraction rate. A high proportion of meso-pores, which effectively connect micro- and macro-pores, had a higher diffusion efficiency and a higher extraction rate. The OM pores with high energy adsorption were located in the micro-pores, and the shale oil existed in a dissolved state with high mobile capacity. The wettability of mineral surfaces affected the adsorption behavior during extraction, and strong oil wetting promoted hydrocarbon re-adsorption in clay minerals, so that the volume of micro-pores was smaller after extraction.
- 4 October 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (10) , 588
Open AccessPore Space Characteristics and Migration Changes in Hydrocarbons in Shale Reservoir
The pore structure and mineral characteristics affect the accumulation and migration of hydrocarbons in shale, which determines the production capacity of shale oil. In this study, shale samples from the Chang 7 member of the Ordos Basin in China were selected to investigate the pore space characteristics, the effect of hydrocarbon accumulation on pore heterogeneity, and the hydrocarbon migration changes based on fractal theory, and a series of experiments were conducted involving X-ray diffraction (XRD), total organic carbon (TOC), Soxhlet extraction, and low-temperature nitrogen (N2) and carbon dioxide (CO2) adsorption. Then, the factors affecting extraction efficiency in shale pores were discussed. The interparticle pores contributed most to the accumulation of shale oil, and the organic matter (OM) pores contributed positively to the adsorption of hydrocarbons. The accumulation of hydrocarbons in the pore space did not increase the heterogeneity of the shale pore structure. The contents, states, and positions of hydrocarbons changed during the extraction process. Hydrocarbons were redistributed on the pore surface after Soxhlet extraction, and the heterogeneity of hydrocarbon adsorption and pore surface roughness were improved. Some heavy hydrocarbons and adsorbed components were pyrolyzed, resulting in the gradual escape of the adsorbed layer in the large pores. However, the free oil in the small pores diffused to the large pores and reaggregated on the surface, restoring a stable adsorption layer. The extraction rate was closely related to the pore throat structure and the wettability of mineral surfaces. The configuration between pores and throats had a crucial influence on the extraction rate. A high proportion of meso-pores, which effectively connect micro- and macro-pores, had a higher diffusion efficiency and a higher extraction rate. The OM pores with high energy adsorption were located in the micro-pores, and the shale oil existed in a dissolved state with high mobile capacity. The wettability of mineral surfaces affected the adsorption behavior during extraction, and strong oil wetting promoted hydrocarbon re-adsorption in clay minerals, so that the volume of micro-pores was smaller after extraction.
- Open Access
- 22 November 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (5) , 1203-1216
Classification and evaluation of tight sandstone reservoirs based on diagenetic facies: a case study on Chang 6 reservoir in the center-west Ordos Basin
Tight sandstone reservoirs dominated by are developed in the Chang 6 oil layer group of the Yanchang Formation in the central-western part of the Ordos Basin. Featuring the lacustrine delta facies, Chang 6 formation in the center-west area of Ordos Basin shows an increasing petroleum reserve expectation. Its exploitation practice, however, has many problems caused by tight sandstone reservoir features. According to diagenetic and pore analysis, the diagenetic facies in the study area are grouped into four types: chlorite-film-intergranular-pore, feldspar-dissolution, clay-cemented-micropore, carbonate-cemented-tightness for their obvious differences in mineral feature and pore evolution. By introducing the comprehensive classification parameter synthesized from 9 other parameters, the reservoir quality is divided up into four levels: I(Feci > 1), II(3 ≤ Feci ≤ 7), III(-2 ≤ Feci ≤ 3), IV(Feci ≤ -2). The reservoir quality division matches well with the diagenetic facies group. To decide the diagenetic type and reservoir quality division in all wells, the logging data are utilized with the Fisher discriminant method, which has obtained a good performance. The method enables the reservoir quality analysis expanding to all wells from samples, which is helpful for exploitation of the study area.
- 22 November 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (5) , 1203-1216
Open AccessClassification and evaluation of tight sandstone reservoirs based on diagenetic facies: a case study on Chang 6 reservoir in the center-west Ordos Basin
Tight sandstone reservoirs dominated by are developed in the Chang 6 oil layer group of the Yanchang Formation in the central-western part of the Ordos Basin. Featuring the lacustrine delta facies, Chang 6 formation in the center-west area of Ordos Basin shows an increasing petroleum reserve expectation. Its exploitation practice, however, has many problems caused by tight sandstone reservoir features. According to diagenetic and pore analysis, the diagenetic facies in the study area are grouped into four types: chlorite-film-intergranular-pore, feldspar-dissolution, clay-cemented-micropore, carbonate-cemented-tightness for their obvious differences in mineral feature and pore evolution. By introducing the comprehensive classification parameter synthesized from 9 other parameters, the reservoir quality is divided up into four levels: I(Feci > 1), II(3 ≤ Feci ≤ 7), III(-2 ≤ Feci ≤ 3), IV(Feci ≤ -2). The reservoir quality division matches well with the diagenetic facies group. To decide the diagenetic type and reservoir quality division in all wells, the logging data are utilized with the Fisher discriminant method, which has obtained a good performance. The method enables the reservoir quality analysis expanding to all wells from samples, which is helpful for exploitation of the study area.
- Open Access
- 24 October 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (3) , 825-834
Classification evaluation method for Chang 7 oil group of Yanchang formation in Ordos Basin
The Chang 7 oil group in the Ordos Basin has the characteristics of a tight lithology, a low formation pressure coefficient and strong reservoir heterogeneity. To better determine reasonable developmental technical countermeasures, oiliness, seepage capacity, and compressibility evaluations are combined. Using a combination of field practice and laboratory experiments, six types of sweetness classification evaluation parameters are screened: oil saturation, longitudinal oil layer structure coefficient, average pore throat radius, gas-oil ratio, brittleness index, and minimum horizontal principal stress. By combining the relationships among variables with the initial production from directional wells, the gray correlation method is used to quantify the weights of the contributions of evaluation parameters to production. On this basis, using the difference method for the curve slope, a sweetness evaluation and classification method for the Chang 7 oil group is constructed, and it solves the difficult problem of quality difference classification for the Chang 7 oil group and provides a reference basis for the optimal design of well patterns and fracturing reconstruction parameters.
- 24 October 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (3) , 825-834
Open AccessClassification evaluation method for Chang 7 oil group of Yanchang formation in Ordos Basin
The Chang 7 oil group in the Ordos Basin has the characteristics of a tight lithology, a low formation pressure coefficient and strong reservoir heterogeneity. To better determine reasonable developmental technical countermeasures, oiliness, seepage capacity, and compressibility evaluations are combined. Using a combination of field practice and laboratory experiments, six types of sweetness classification evaluation parameters are screened: oil saturation, longitudinal oil layer structure coefficient, average pore throat radius, gas-oil ratio, brittleness index, and minimum horizontal principal stress. By combining the relationships among variables with the initial production from directional wells, the gray correlation method is used to quantify the weights of the contributions of evaluation parameters to production. On this basis, using the difference method for the curve slope, a sweetness evaluation and classification method for the Chang 7 oil group is constructed, and it solves the difficult problem of quality difference classification for the Chang 7 oil group and provides a reference basis for the optimal design of well patterns and fracturing reconstruction parameters.
- Open Access
- 16 October 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (3) , 601-612
Micropore structure and water driving characteristics of tight sandstone reservoirs in Ordos Basin
In order to explore the influence of the micropore structure of the tight sandstone reservoir in the water driving characteristics, the studies on the Chang 6 tight sandstone reservoir of the middle-western part of Ordos Basin are carried out by various experiments such as cast-thin section analysis, scanning electron microscopy, high-pressure mercury injection and micro-water driving. The result shows that the permeability contribution curves of samples shift to the left as the sample permeability decreases, indicating that the greater the permeability, the greater the proportion of large pores. The permeability is mostly dominated by pores with the radius larger than R50–R60. There are big differences in the water driving type, oil-driven efficiency and residual oil distribution characteristics between reservoirs of different types. The type II reservoir is the major target of subsequent exploration and development, where water driving types consist of mesh and finger, leaving the residual oil mainly locked by water or isolated as oil drops. The size and distribution feature of pores are the key factors dominating the oil-driven efficiency.
- 16 October 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 12 (3) , 601-612
Open AccessMicropore structure and water driving characteristics of tight sandstone reservoirs in Ordos Basin
In order to explore the influence of the micropore structure of the tight sandstone reservoir in the water driving characteristics, the studies on the Chang 6 tight sandstone reservoir of the middle-western part of Ordos Basin are carried out by various experiments such as cast-thin section analysis, scanning electron microscopy, high-pressure mercury injection and micro-water driving. The result shows that the permeability contribution curves of samples shift to the left as the sample permeability decreases, indicating that the greater the permeability, the greater the proportion of large pores. The permeability is mostly dominated by pores with the radius larger than R50–R60. There are big differences in the water driving type, oil-driven efficiency and residual oil distribution characteristics between reservoirs of different types. The type II reservoir is the major target of subsequent exploration and development, where water driving types consist of mesh and finger, leaving the residual oil mainly locked by water or isolated as oil drops. The size and distribution feature of pores are the key factors dominating the oil-driven efficiency.
- Open Access
- 1 September 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-11
Difference of Microfeatures among Diagenetic Facies in Tight Sandstone Reservoirs of the Triassic Yanchang Formation in the Midwestern Region, Ordos Basin
Based on the background of sedimentary characteristics, a large amount of core and thin section analysis, taking Chang 6 reservoir of Yanchang Formation in the central and western Ordos Basin as an example, through the application of scanning electron microscopy, high-pressure mercury injection, nuclear magnetic resonance and microscopic water drive oil model, and other experimental test methods, the diagenetic facies types and microscopic pore structure characteristics of tight sandstone reservoirs are discussed and analyzed in depth. The results show that the average porosity loss rate caused by early diagenesis compaction in the study area is 50.62, which is the main reason for reservoir compactness. The cementation further causes porosity loss, and the later dissolution increases the reservoir space in the study area to a certain extent. Different diagenetic facies reservoirs not only have obvious differences in porosity evolution characteristics but also have significant differences in pore throat radius distribution characteristics, movable fluid occurrence characteristics, and water drive oil characteristics. The pore throat distribution with radius greater than R50R60 determines the permeability. The difference in movable fluid saturation mainly depends on the connectivity of the relative large pore space corresponding to the relaxation time greater than the cut-off value of T2. The size of pore throat radius has a good control effect on water flooding efficiency.
- 1 September 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-11
Open AccessDifference of Microfeatures among Diagenetic Facies in Tight Sandstone Reservoirs of the Triassic Yanchang Formation in the Midwestern Region, Ordos Basin
Based on the background of sedimentary characteristics, a large amount of core and thin section analysis, taking Chang 6 reservoir of Yanchang Formation in the central and western Ordos Basin as an example, through the application of scanning electron microscopy, high-pressure mercury injection, nuclear magnetic resonance and microscopic water drive oil model, and other experimental test methods, the diagenetic facies types and microscopic pore structure characteristics of tight sandstone reservoirs are discussed and analyzed in depth. The results show that the average porosity loss rate caused by early diagenesis compaction in the study area is 50.62, which is the main reason for reservoir compactness. The cementation further causes porosity loss, and the later dissolution increases the reservoir space in the study area to a certain extent. Different diagenetic facies reservoirs not only have obvious differences in porosity evolution characteristics but also have significant differences in pore throat radius distribution characteristics, movable fluid occurrence characteristics, and water drive oil characteristics. The pore throat distribution with radius greater than R50R60 determines the permeability. The difference in movable fluid saturation mainly depends on the connectivity of the relative large pore space corresponding to the relaxation time greater than the cut-off value of T2. The size of pore throat radius has a good control effect on water flooding efficiency.
- Open Access
- 17 February 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 11 (3) , 1037-1051
Diagenetic features and porosity dense evolution of Chang 8 tight sandstone reservoir in Hujianshan area, Ordos Basin
Diagenesis is the main reason for tight reservoir lithology, complex pore-throat structure, strong heterogeneity, and variable occurrence and distribution characteristics of fluid in the pore-throat, which directly restricts the Chang 8 oil layer group in the Ordos Basin. Exploration and development. Based on the analysis of a large number of cores and thin slices, through the application of scanning electron microscopy, high-pressure mercury intrusion and other experimental testing methods, the diagenesis characteristics of the Chang 8 tight reservoir in the Hujianshan area of the Ordos Basin and the mechanism and process of tight porosity evolution are analyzed in depth. The relationship between different diagenetic facies belts, pore structures and their impact on reservoir quality is further explored. The results show that the Chang 8 reservoir in the Hujianshan area is in the mid-diagenetic stage A, which mainly experienced compaction-pressure dissolution, cementation, dissolution and other diagenesis. The compaction caused the loss of a large number of primary pores in the sandstone, which is the most important factor for the densification of the Chang 8 reservoir in the study area, followed by cementation of carbonate and clay minerals. The chlorite clay film formed in the early diagenesis retained the primary particles. The inter-pores maintain good reservoir physical properties, and are affected by the acidic diagenetic environment. The unstable feldspar minerals dissolve. The dissolution pores produced effectively improve the connectivity and permeability of the pores. The compaction reduces the porosity on average by 19.37% and the loss rate reaches 51.86%. The cementation reduces the porosity on average by 11.97% and the loss rate reaches 32.66%. The dissolution increases the porosity by 3.26% on average. In the process of pore evolution, the compaction of the early diagenetic stage A and the authigenic clay minerals and carbonate cementation in the middle diagenetic stage are the main reasons for the substantial decrease in porosity. The early diagenetic stage B is due to its short duration. Less porosity is lost. The secondary pores generated in the early diagenetic stage A are basically filled with microcrystalline calcite, while the organic acid dissolution in the middle diagenetic stage is limited. According to different diagenetic minerals and pore evolution characteristics, combined with logging response characteristics, the whole area is divided into four diagenetic facies. Among them, the residual chlorite-membrane intergranular-pore facies and the feldspar dissolution facies of chlorite film are the most favorable diagenetic facies. The findings of this study can help for better understanding of the diagenetic characteristics and quantitative evolution of pores, reveal the diagenetic-pore evolution rules of Chang 8 sandstone reservoirs in the study area, and provide a basis for reservoir evaluation and prediction in the study area.
- 17 February 2021
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 11 (3) , 1037-1051
Open AccessDiagenetic features and porosity dense evolution of Chang 8 tight sandstone reservoir in Hujianshan area, Ordos Basin
Diagenesis is the main reason for tight reservoir lithology, complex pore-throat structure, strong heterogeneity, and variable occurrence and distribution characteristics of fluid in the pore-throat, which directly restricts the Chang 8 oil layer group in the Ordos Basin. Exploration and development. Based on the analysis of a large number of cores and thin slices, through the application of scanning electron microscopy, high-pressure mercury intrusion and other experimental testing methods, the diagenesis characteristics of the Chang 8 tight reservoir in the Hujianshan area of the Ordos Basin and the mechanism and process of tight porosity evolution are analyzed in depth. The relationship between different diagenetic facies belts, pore structures and their impact on reservoir quality is further explored. The results show that the Chang 8 reservoir in the Hujianshan area is in the mid-diagenetic stage A, which mainly experienced compaction-pressure dissolution, cementation, dissolution and other diagenesis. The compaction caused the loss of a large number of primary pores in the sandstone, which is the most important factor for the densification of the Chang 8 reservoir in the study area, followed by cementation of carbonate and clay minerals. The chlorite clay film formed in the early diagenesis retained the primary particles. The inter-pores maintain good reservoir physical properties, and are affected by the acidic diagenetic environment. The unstable feldspar minerals dissolve. The dissolution pores produced effectively improve the connectivity and permeability of the pores. The compaction reduces the porosity on average by 19.37% and the loss rate reaches 51.86%. The cementation reduces the porosity on average by 11.97% and the loss rate reaches 32.66%. The dissolution increases the porosity by 3.26% on average. In the process of pore evolution, the compaction of the early diagenetic stage A and the authigenic clay minerals and carbonate cementation in the middle diagenetic stage are the main reasons for the substantial decrease in porosity. The early diagenetic stage B is due to its short duration. Less porosity is lost. The secondary pores generated in the early diagenetic stage A are basically filled with microcrystalline calcite, while the organic acid dissolution in the middle diagenetic stage is limited. According to different diagenetic minerals and pore evolution characteristics, combined with logging response characteristics, the whole area is divided into four diagenetic facies. Among them, the residual chlorite-membrane intergranular-pore facies and the feldspar dissolution facies of chlorite film are the most favorable diagenetic facies. The findings of this study can help for better understanding of the diagenetic characteristics and quantitative evolution of pores, reveal the diagenetic-pore evolution rules of Chang 8 sandstone reservoirs in the study area, and provide a basis for reservoir evaluation and prediction in the study area.