Chia-Ching Chou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chia-Ching Chou has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Luan-Yin Chang
Department of Pediatrics, National Taiwan University Hospital and National Taiwan University College of Medicine, Taipei, Taiwan
5 shared publications - Shu-Wei Chang
Department of Civil Engineering, National Taiwan University, Taipei, Taiwan
4 shared publications - Feipei Lai
Department of Computer Science and Information Engineering, National Taiwan University, Taipei, Taiwan
3 shared publications - Shan-Hui Hsu
Institute of Polymer Science and Engineering National Taiwan University Taipei Taiwan
3 shared publications - Tu-Hsuan Chang
Department of Pediatrics, Chi Mei Medical Center, Tainan, Taiwan
3 shared publications - Yun-Chung Liu
Department of Biostatistics and Bioinformatics, Duke University, Durham, USA
3 shared publications
Latest Publications
- Open Access
- 9 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (42) , 49997-50006
Effects of Degrees of Aldehyde Modification on Molecular Structures and Properties of Cellulose Nanofiber Cross-Linked Self-Healing Hydrogels
Glycol chitosan (GC) and multifunctional cellulose nanofiber (MCNF) composite hydrogel prepared via Schiff base chemistry have demonstrated excellent self-healing, shear-thinning, and injectable properties, holding promise for various applications. MCNF, a derivative of cellulose nanofibers (CNFs), is introduced with dialdehyde groups through sequential TEMPO-mediated oxidation and periodate oxidation. These aldehyde groups form a dynamic Schiff base linkage with the amine groups of GC chains. While both cellulose and chitosan are biocompatible natural polymers, excessive aldehyde modification of MCNF can disrupt the uniformity of the hydrogel network. To elucidate the underlying molecular mechanism of aldehyde modification of MCNF on affecting the molecular structure of the hydrogel network, here, we performed molecular dynamics simulations on both a single MCNF molecule and a GC/MCNF composite hydrogel with varying degrees of aldehyde modification. For a single MCNF, increased aldehyde modification initially resulted in a more extended molecular conformation, but at higher modification levels (above 15%), the chains became more curled. Correspondingly, the Young's modulus of MCNF also decreased slightly with increased modification, consistent with the trends in experimental results suggesting reduced mechanical stiffness of the hydrogel due to a loss in intramolecular hydrogen bonding and increased chain flexibility. Among the GC/MCNF hydrogels, the aldehyde content significantly influenced the interaction and network structure. At modification levels below 15%, hydrogen bonding between GC and MCNF was enhanced and evenly distributed, supporting a homogeneous and mechanically robust hydrogel. At higher modification levels, excessive GC-MCNF interactions led to localized aggregation, reduced interconnectivity, and a decline in the tensile modulus. This study provides molecular-level insights into how the aldehyde modification of CNFs affects both the conformation of MCNF and the overall integrity of GC/MCNF hydrogels. These findings offer valuable guidance for optimizing aldehyde-modified CNF-based self-healing hydrogels for biomedical and engineering applications.
- 9 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (42) , 49997-50006
Open AccessEffects of Degrees of Aldehyde Modification on Molecular Structures and Properties of Cellulose Nanofiber Cross-Linked Self-Healing Hydrogels
Glycol chitosan (GC) and multifunctional cellulose nanofiber (MCNF) composite hydrogel prepared via Schiff base chemistry have demonstrated excellent self-healing, shear-thinning, and injectable properties, holding promise for various applications. MCNF, a derivative of cellulose nanofibers (CNFs), is introduced with dialdehyde groups through sequential TEMPO-mediated oxidation and periodate oxidation. These aldehyde groups form a dynamic Schiff base linkage with the amine groups of GC chains. While both cellulose and chitosan are biocompatible natural polymers, excessive aldehyde modification of MCNF can disrupt the uniformity of the hydrogel network. To elucidate the underlying molecular mechanism of aldehyde modification of MCNF on affecting the molecular structure of the hydrogel network, here, we performed molecular dynamics simulations on both a single MCNF molecule and a GC/MCNF composite hydrogel with varying degrees of aldehyde modification. For a single MCNF, increased aldehyde modification initially resulted in a more extended molecular conformation, but at higher modification levels (above 15%), the chains became more curled. Correspondingly, the Young's modulus of MCNF also decreased slightly with increased modification, consistent with the trends in experimental results suggesting reduced mechanical stiffness of the hydrogel due to a loss in intramolecular hydrogen bonding and increased chain flexibility. Among the GC/MCNF hydrogels, the aldehyde content significantly influenced the interaction and network structure. At modification levels below 15%, hydrogen bonding between GC and MCNF was enhanced and evenly distributed, supporting a homogeneous and mechanically robust hydrogel. At higher modification levels, excessive GC-MCNF interactions led to localized aggregation, reduced interconnectivity, and a decline in the tensile modulus. This study provides molecular-level insights into how the aldehyde modification of CNFs affects both the conformation of MCNF and the overall integrity of GC/MCNF hydrogels. These findings offer valuable guidance for optimizing aldehyde-modified CNF-based self-healing hydrogels for biomedical and engineering applications.
- 10 June 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 366, 123872
Molecular insights into the mechanism between the structural and mechanical properties of glycol chitosan methacrylate hydrogels
- 10 June 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 366, 123872
Molecular insights into the mechanism between the structural and mechanical properties of glycol chitosan methacrylate hydrogels
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Enhancing the Hydrogen Evolution Reaction Performance of NiMo‐LDH With a Sputtering Modification
Water electrolysis powered by renewable energy is a promising technology for green hydrogen production. Anion exchange membrane water electrolysis (AEMWE) has gained attention due to its ability to employ nonnoble metal catalysts. The development of efficient non‐precious metal‐based electrocatalysts for the hydrogen evolution reaction (HER) is particularly critical to reducing equipment costs. In this study, a NiMo metal thin film was deposited onto electrodeposited NiMo layered double hydroxide (NiMo‐LDH) via a sputtering technique to tune the properties of the LDH layer. Material characterizations were conducted to investigate the structural and catalytic modifications induced by the sputtered NiMo layer. Furthermore, the practical application of the bilayer catalyst was evaluated in an AEM cell in a comparative analysis of cathode‐dry and cathode‐wet operation modes. The NiMo‐LDH modified with the sputtered NiMo layer exhibited a lower onset potential and lower overpotential for HER. At a current density of 100 mA/cm 2 , the NiMo@NiMo‐LDH on Ni fiber paper (NiMo@NiMo‐LDH/NFP ∗ ) electrode showed an overpotential of 496.79 mV, significantly lower than that of the unmodified NiMo‐LDH/NFP ∗ electrode (604.21 mV). In AEMWE system testing at 70°C and 1.8 V, the cathode‐wet mode achieved a current density of 156.62 mA/cm 2 , outperforming the cathode‐dry mode (115.30 mA/cm 2 ). In the accelerated stress test (AST) stability test, after 5000 high/low current load cycles, the NiMo@NiMo‐LDH/NFP ∗ (−)//SSP ∗ (+) cell exhibited only a +2.3% change in current density at 2 V, demonstrating great stability and application potential.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessEnhancing the Hydrogen Evolution Reaction Performance of NiMo‐LDH With a Sputtering Modification
Water electrolysis powered by renewable energy is a promising technology for green hydrogen production. Anion exchange membrane water electrolysis (AEMWE) has gained attention due to its ability to employ nonnoble metal catalysts. The development of efficient non‐precious metal‐based electrocatalysts for the hydrogen evolution reaction (HER) is particularly critical to reducing equipment costs. In this study, a NiMo metal thin film was deposited onto electrodeposited NiMo layered double hydroxide (NiMo‐LDH) via a sputtering technique to tune the properties of the LDH layer. Material characterizations were conducted to investigate the structural and catalytic modifications induced by the sputtered NiMo layer. Furthermore, the practical application of the bilayer catalyst was evaluated in an AEM cell in a comparative analysis of cathode‐dry and cathode‐wet operation modes. The NiMo‐LDH modified with the sputtered NiMo layer exhibited a lower onset potential and lower overpotential for HER. At a current density of 100 mA/cm 2 , the NiMo@NiMo‐LDH on Ni fiber paper (NiMo@NiMo‐LDH/NFP ∗ ) electrode showed an overpotential of 496.79 mV, significantly lower than that of the unmodified NiMo‐LDH/NFP ∗ electrode (604.21 mV). In AEMWE system testing at 70°C and 1.8 V, the cathode‐wet mode achieved a current density of 156.62 mA/cm 2 , outperforming the cathode‐dry mode (115.30 mA/cm 2 ). In the accelerated stress test (AST) stability test, after 5000 high/low current load cycles, the NiMo@NiMo‐LDH/NFP ∗ (−)//SSP ∗ (+) cell exhibited only a +2.3% change in current density at 2 V, demonstrating great stability and application potential.
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 535-538
Design and Experimental Study of Wavelength Beam Combining System Using Full-Bar Diode Laser Stacks
Wavelength beam combining technology plays an important role in generating high-brightness laser beams at high-power levels. This technology is used for various applications, including military and industrial manufacturing. Recent studies have demonstrated the system using mini-bar diode laser stacks, which offer superior optical performance but suffer from pricey, customized fabrication and possibly intense thermal loads. Hence, we offer a suitable alternative approach by incorporating full-bar diode laser stacks, which are relatively cost-effective, off-the-shelf, and easy to manufacture, making the frameworks more amenable to mass production. However, this framework needs further development due to the higher smile effect in the full-bar stacks. In this work, we experimentally demonstrate this idea with a 213 W output power at a central wavelength of 975 nm. Moreover, although the degradation caused by the smile and thermo-optical effects, its preserved beam quality is most prominent in its availability of applied to couple into a $105~\mu \text{m}$ core fiber. This research opens new possibilities for future WBC system design and development using full-bar diode laser stacks.
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 535-538
Design and Experimental Study of Wavelength Beam Combining System Using Full-Bar Diode Laser Stacks
Wavelength beam combining technology plays an important role in generating high-brightness laser beams at high-power levels. This technology is used for various applications, including military and industrial manufacturing. Recent studies have demonstrated the system using mini-bar diode laser stacks, which offer superior optical performance but suffer from pricey, customized fabrication and possibly intense thermal loads. Hence, we offer a suitable alternative approach by incorporating full-bar diode laser stacks, which are relatively cost-effective, off-the-shelf, and easy to manufacture, making the frameworks more amenable to mass production. However, this framework needs further development due to the higher smile effect in the full-bar stacks. In this work, we experimentally demonstrate this idea with a 213 W output power at a central wavelength of 975 nm. Moreover, although the degradation caused by the smile and thermo-optical effects, its preserved beam quality is most prominent in its availability of applied to couple into a $105~\mu \text{m}$ core fiber. This research opens new possibilities for future WBC system design and development using full-bar diode laser stacks.
- 14 February 2024
- Published by Wiley in Pediatric Pulmonology
- Vol. 59 (5) , 1256-1265
Machine learning models to evaluate mortality in pediatric patients with pneumonia in the intensive care unit
Objectives: This study aimed to predict mortality in children with pneumonia who were admitted to the intensive care unit (ICU) to aid decision‐making.Study Design: Retrospective cohort study conducted at a single tertiary hospital.Patients: This study included children who were admitted to the pediatric ICU at the National Taiwan University Hospital between 2010 and 2019 due to pneumonia.Methodology: Two prediction models were developed using tree‐structured machine learning algorithms. The primary outcomes were ICU mortality and 24‐h ICU mortality. A total of 33 features, including demographics, underlying diseases, vital signs, and laboratory data, were collected from the electronic health records. The machine learning models were constructed using the development data set, and performance matrices were computed using the holdout test data set.Results: A total of 1231 ICU admissions of children with pneumonia were included in the final cohort. The area under the receiver operating characteristic curves (AUROCs) of the ICU mortality model and 24‐h ICU mortality models was 0.80 (95% confidence interval [CI], 0.69–0.91) and 0.92 (95% CI, 0.86–0.92), respectively. Based on feature importance, the model developed in this study tended to predict increased mortality for the subsequent 24 h if a reduction in the blood pressure, peripheral capillary oxygen saturation (SpO2), or higher partial pressure of carbon dioxide (PCO2) were observed.Conclusions: This study demonstrated that the machine learning models for predicting ICU mortality and 24‐h ICU mortality in children with pneumonia have the potential to support decision‐making, especially in resource‐limited settings.
- 14 February 2024
- Published by Wiley in Pediatric Pulmonology
- Vol. 59 (5) , 1256-1265
Machine learning models to evaluate mortality in pediatric patients with pneumonia in the intensive care unit
Objectives: This study aimed to predict mortality in children with pneumonia who were admitted to the intensive care unit (ICU) to aid decision‐making.Study Design: Retrospective cohort study conducted at a single tertiary hospital.Patients: This study included children who were admitted to the pediatric ICU at the National Taiwan University Hospital between 2010 and 2019 due to pneumonia.Methodology: Two prediction models were developed using tree‐structured machine learning algorithms. The primary outcomes were ICU mortality and 24‐h ICU mortality. A total of 33 features, including demographics, underlying diseases, vital signs, and laboratory data, were collected from the electronic health records. The machine learning models were constructed using the development data set, and performance matrices were computed using the holdout test data set.Results: A total of 1231 ICU admissions of children with pneumonia were included in the final cohort. The area under the receiver operating characteristic curves (AUROCs) of the ICU mortality model and 24‐h ICU mortality models was 0.80 (95% confidence interval [CI], 0.69–0.91) and 0.92 (95% CI, 0.86–0.92), respectively. Based on feature importance, the model developed in this study tended to predict increased mortality for the subsequent 24 h if a reduction in the blood pressure, peripheral capillary oxygen saturation (SpO2), or higher partial pressure of carbon dioxide (PCO2) were observed.Conclusions: This study demonstrated that the machine learning models for predicting ICU mortality and 24‐h ICU mortality in children with pneumonia have the potential to support decision‐making, especially in resource‐limited settings.
- 19 October 2023
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 9 (11) , 6146-6155
Effects of the Degree of Phenol Substitution on Molecular Structures and Properties of Chitosan-Phenol-Based Self-Healing Hydrogels
Click chemistry is commonly used to prepare hydrogels, and chitosan-phenol prepared by using a Schiff base has been widely employed in the field of biomaterials. Chitosan-phenol is a derivative of chitosan; the phenol groups can disrupt both the inter- and intramolecular hydrogen bonds in chitosan, thereby reducing its crystallinity and improving its water solubility. In addition, chitosan-phenol exhibits various beneficial physiological functions. However, it is still unclear whether the degree of phenol substitution in the chitosan main chain affects the molecular interactions and structural properties of the self-healing hydrogels. To explore this issue, we investigated the molecular structure and network of self-healing hydrogels composed of chitosan-phenol with varying degrees of phenol substitution and dibenzaldehyde poly(ethylene oxide) (DB-PEO) using molecular dynamics simulations. We observed that when the degree of phenol substitution in the self-healing hydrogel was less than 15%, an increase in the degree of phenol substitution led to an increase in the interactions between chitosan-phenol and DB-PEO, and it enhanced the dynamic covalent bond cross-linking generated through the Schiff base reaction. However, when the degree of phenol substitution exceeded 15%, excessive phenol groups caused excessive intramolecular interactions within chitosan-phenol molecules, which reduced the binding between chitosan-phenol and DB-PEO. Our results revealed the influence of the degree of phenol substitution on the molecular structure of the self-healing hydrogels and showed an optimal degree of phenol substitution. These findings provide important insights for the future design of self-healing hydrogels based on chitosan and should help in enhancing the applicability of hydrogels in the field of biomedicine.
- 19 October 2023
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 9 (11) , 6146-6155
Effects of the Degree of Phenol Substitution on Molecular Structures and Properties of Chitosan-Phenol-Based Self-Healing Hydrogels
Click chemistry is commonly used to prepare hydrogels, and chitosan-phenol prepared by using a Schiff base has been widely employed in the field of biomaterials. Chitosan-phenol is a derivative of chitosan; the phenol groups can disrupt both the inter- and intramolecular hydrogen bonds in chitosan, thereby reducing its crystallinity and improving its water solubility. In addition, chitosan-phenol exhibits various beneficial physiological functions. However, it is still unclear whether the degree of phenol substitution in the chitosan main chain affects the molecular interactions and structural properties of the self-healing hydrogels. To explore this issue, we investigated the molecular structure and network of self-healing hydrogels composed of chitosan-phenol with varying degrees of phenol substitution and dibenzaldehyde poly(ethylene oxide) (DB-PEO) using molecular dynamics simulations. We observed that when the degree of phenol substitution in the self-healing hydrogel was less than 15%, an increase in the degree of phenol substitution led to an increase in the interactions between chitosan-phenol and DB-PEO, and it enhanced the dynamic covalent bond cross-linking generated through the Schiff base reaction. However, when the degree of phenol substitution exceeded 15%, excessive phenol groups caused excessive intramolecular interactions within chitosan-phenol molecules, which reduced the binding between chitosan-phenol and DB-PEO. Our results revealed the influence of the degree of phenol substitution on the molecular structure of the self-healing hydrogels and showed an optimal degree of phenol substitution. These findings provide important insights for the future design of self-healing hydrogels based on chitosan and should help in enhancing the applicability of hydrogels in the field of biomedicine.
- 29 August 2023
- Published by Wiley in Pediatric Pulmonology
- Vol. 58 (11) , 3246-3254
Outcomes of pediatric community‐acquired pneumonia before and after national pneumococcal immunization in Taiwan
Objective: In Taiwan, the incidence of invasive pneumococcal disease (IPD) in children declined after the catch‐up primary vaccination programs and the full national immunization program (NIP) with PCV13. The objective of the study was to investigate the clinical outcomes of pediatric community‐acquired pneumonia (CAP) before and after the NIP.Methods: The study included patients aged 3 months to 17 years who were diagnosed with CAP and treated at the National Taiwan University Hospital between 2007 and 2019. Patients were assigned to three birth cohorts according to their birth years and vaccination eligibility: non‐NIP, catch‐up, and full NIP. We compared the rates of severe outcomes, including case fatality and pathogens.Results: A total of 6557 patients who met the CAP criteria were enrolled during the study period. The case‐fatality rate decreased from 3.2% (94/2984) in the non‐NIP cohort to 0.3% (7/2176) in the catch‐up cohort and 0.8% (11/1397) in the full NIP cohort (p < 0.001). Furthermore, there was a significant decrease in invasive ventilation from the non‐NIP (17.9%) to both catch‐up (6.8%) and full NIP cohorts (9.1%). The rate of IPD declined from the non‐NIP cohort to the catch‐up cohort (1.8% vs. 0.6%, p < 0.001) and from the catch‐up to the full NIP cohort (0.6% vs. 0.07%, p = 0.014). In contrast, the rates of infections with other pathogens increased after NIP.Conclusion: The introduction of PCV13 showed significant reduction in case‐fatality and IPD rates. The increasing rates of other pathogens warrant further surveillance for their clinical significance.
- 29 August 2023
- Published by Wiley in Pediatric Pulmonology
- Vol. 58 (11) , 3246-3254
Outcomes of pediatric community‐acquired pneumonia before and after national pneumococcal immunization in Taiwan
Objective: In Taiwan, the incidence of invasive pneumococcal disease (IPD) in children declined after the catch‐up primary vaccination programs and the full national immunization program (NIP) with PCV13. The objective of the study was to investigate the clinical outcomes of pediatric community‐acquired pneumonia (CAP) before and after the NIP.Methods: The study included patients aged 3 months to 17 years who were diagnosed with CAP and treated at the National Taiwan University Hospital between 2007 and 2019. Patients were assigned to three birth cohorts according to their birth years and vaccination eligibility: non‐NIP, catch‐up, and full NIP. We compared the rates of severe outcomes, including case fatality and pathogens.Results: A total of 6557 patients who met the CAP criteria were enrolled during the study period. The case‐fatality rate decreased from 3.2% (94/2984) in the non‐NIP cohort to 0.3% (7/2176) in the catch‐up cohort and 0.8% (11/1397) in the full NIP cohort (p < 0.001). Furthermore, there was a significant decrease in invasive ventilation from the non‐NIP (17.9%) to both catch‐up (6.8%) and full NIP cohorts (9.1%). The rate of IPD declined from the non‐NIP cohort to the catch‐up cohort (1.8% vs. 0.6%, p < 0.001) and from the catch‐up to the full NIP cohort (0.6% vs. 0.07%, p = 0.014). In contrast, the rates of infections with other pathogens increased after NIP.Conclusion: The introduction of PCV13 showed significant reduction in case‐fatality and IPD rates. The increasing rates of other pathogens warrant further surveillance for their clinical significance.
- 28 June 2023
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 193
Machine learning model for preoperative assessment of ultrasound diathermy with implants
- 28 June 2023
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 193
Machine learning model for preoperative assessment of ultrasound diathermy with implants
- Open Access
- 1 May 2023
- Published by Elsevier in Journal of Microbiology, Immunology and Infection
- Vol. 56 (4) , 772-781
Clinical characteristics of hospitalized children with community-acquired pneumonia and respiratory infections: Using machine learning approaches to support pathogen prediction at admission
- 1 May 2023
- Published by Elsevier in Journal of Microbiology, Immunology and Infection
- Vol. 56 (4) , 772-781
Open AccessClinical characteristics of hospitalized children with community-acquired pneumonia and respiratory infections: Using machine learning approaches to support pathogen prediction at admission
- Open Access
- 1 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Computational and Structural Biotechnology Journal
- Vol. 21, 2792-2800
Molecular interactions of tannic acid and matrix metalloproteinases 2 and 9
Tannic acid (TA) has antibacterial, antioxidant, and anti-inflammatory properties and acts as an adhesive, hemostatic, and crosslinking agent in hydrogels. Matrix metalloproteinases (MMPs), a family of endopeptidase enzymes, play important roles in tissue remodeling and wound healing. TA has been reported to inhibit MMP-2/− 9 activities, thereby improving both tissue remodeling and wound healing. However, the mechanism of interaction of TA with MMP-2 and MMP-9 has not been fully elucidated. In this study, the full atomistic modeling approach was applied to explore the mechanisms and structures of TA binding with MMP-2 and MMP-9. Macromolecular models of the TA–MMP-2/− 9 complex were built by docking based on experimentally resolved MMP structures, and further equilibrium processes were examined by molecular dynamics (MD) simulations to investigate the binding mechanism and structural dynamics of the TA–MMP-2/− 9 complexes. The molecular interactions between TA and MMPs, including H-bond formation and hydrophobic and electrostatic interactions, were analyzed and decoupled to elucidate the dominant factors in TA–MMP binding. TA binds to MMPs mainly at two binding regions, residues 163–164 and 220–223 in MMP-2 and residues 179–190 and 228–248 in MMP-9. Two arms of TA participate in binding MMP-2 with 3.61 hydrogen bonds. On the other hand, TA binds MMP-9 with a distinct configuration involving four arms with 4.75 hydrogen bonds, resulting in a tighter binding conformation. Understanding the binding mechanism and structural dynamics of TA with these two MMPs provides crucial and fundamental knowledge regarding the inhibitory and stabilizing effects of TA on MMPs.
- 1 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Computational and Structural Biotechnology Journal
- Vol. 21, 2792-2800
Open AccessMolecular interactions of tannic acid and matrix metalloproteinases 2 and 9
Tannic acid (TA) has antibacterial, antioxidant, and anti-inflammatory properties and acts as an adhesive, hemostatic, and crosslinking agent in hydrogels. Matrix metalloproteinases (MMPs), a family of endopeptidase enzymes, play important roles in tissue remodeling and wound healing. TA has been reported to inhibit MMP-2/− 9 activities, thereby improving both tissue remodeling and wound healing. However, the mechanism of interaction of TA with MMP-2 and MMP-9 has not been fully elucidated. In this study, the full atomistic modeling approach was applied to explore the mechanisms and structures of TA binding with MMP-2 and MMP-9. Macromolecular models of the TA–MMP-2/− 9 complex were built by docking based on experimentally resolved MMP structures, and further equilibrium processes were examined by molecular dynamics (MD) simulations to investigate the binding mechanism and structural dynamics of the TA–MMP-2/− 9 complexes. The molecular interactions between TA and MMPs, including H-bond formation and hydrophobic and electrostatic interactions, were analyzed and decoupled to elucidate the dominant factors in TA–MMP binding. TA binds to MMPs mainly at two binding regions, residues 163–164 and 220–223 in MMP-2 and residues 179–190 and 228–248 in MMP-9. Two arms of TA participate in binding MMP-2 with 3.61 hydrogen bonds. On the other hand, TA binds MMP-9 with a distinct configuration involving four arms with 4.75 hydrogen bonds, resulting in a tighter binding conformation. Understanding the binding mechanism and structural dynamics of TA with these two MMPs provides crucial and fundamental knowledge regarding the inhibitory and stabilizing effects of TA on MMPs.