Takahiro Kojima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takahiro Kojima has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Hiroshi Sakaguchi
Institute of Advanced Energy Kyoto University Uji Kyoto 611-0011 Japan
12 shared publications - Kazuhiro Fukami
Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan
8 shared publications - Cong Xie
Institute of Advanced Energy Kyoto University Gokasyo, Uji, Kyoto 611-0011 Japan
3 shared publications - Kenji Kazumi
Department of Materials Science and Engineering Kyoto University Kyoto Kyoto 606-8501 Japan
3 shared publications - Pengcheng Qiu
Institute of Advanced Energy Kyoto University Uji Kyoto 611-0011 Japan
3 shared publications - Shunpei Nobusue
Institute of Advanced Energy, Kyoto University, Uji, Japan
3 shared publications
Latest Publications
- 24 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23679-23688
Formation Mechanism of Orange Phosphorus via Photoassisted Bottom-Up Synthesis
Orange phosphorus (orange P), a theoretically predicted one-dimensional (1D) polar phosphorus allotrope characterized by repeating [P8]P2[ units, was successfully synthesized using a photoassisted bottom-up approach from a solution-processable Na2P16 (P7]P2[P7) precursor. Laser irradiation on Na2P16 film induces a phase transition from amorphous to crystalline, followed by polymerization into NaP15 ([P8]P2[P3]P2[), with further rearrangement to form orange P. This material shows excellent piezoresistivity, with a gauge factor surpassing many state-of-the-art two-dimensional (2D) materials, making it an ideal candidate for high-sensitivity strain sensors. Nonetheless, the formation mechanism remains unclear. Herein, we investigate the formation mechanism by combining experiments and density functional theory (DFT) calculations. Theoretical studies suggest that polymerization proceeds via heterocoupling between Na2P16 and its photofragmented intermediates (P6]P2[P7), in which negatively charged [P7] termini are converted into neutral [P6]. The termini of resulting NaP15 oligomers undergo further heterocoupling via the same mechanism, allowing polymer chain elongation. Subsequently, NaP15 undergoes oxidation, where trace O2 preferentially reacts with ionic phosphorus of [P3] subunits, triggering a rearrangement to form linear [P8]P2[. Our work provides mechanistic insights into creating the 1D polar pentagonal-phosphorus strands, enabling their potential applications in future piezo-responsive technologies.
- 24 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23679-23688
Formation Mechanism of Orange Phosphorus via Photoassisted Bottom-Up Synthesis
Orange phosphorus (orange P), a theoretically predicted one-dimensional (1D) polar phosphorus allotrope characterized by repeating [P8]P2[ units, was successfully synthesized using a photoassisted bottom-up approach from a solution-processable Na2P16 (P7]P2[P7) precursor. Laser irradiation on Na2P16 film induces a phase transition from amorphous to crystalline, followed by polymerization into NaP15 ([P8]P2[P3]P2[), with further rearrangement to form orange P. This material shows excellent piezoresistivity, with a gauge factor surpassing many state-of-the-art two-dimensional (2D) materials, making it an ideal candidate for high-sensitivity strain sensors. Nonetheless, the formation mechanism remains unclear. Herein, we investigate the formation mechanism by combining experiments and density functional theory (DFT) calculations. Theoretical studies suggest that polymerization proceeds via heterocoupling between Na2P16 and its photofragmented intermediates (P6]P2[P7), in which negatively charged [P7] termini are converted into neutral [P6]. The termini of resulting NaP15 oligomers undergo further heterocoupling via the same mechanism, allowing polymer chain elongation. Subsequently, NaP15 undergoes oxidation, where trace O2 preferentially reacts with ionic phosphorus of [P3] subunits, triggering a rearrangement to form linear [P8]P2[. Our work provides mechanistic insights into creating the 1D polar pentagonal-phosphorus strands, enabling their potential applications in future piezo-responsive technologies.
- 9 June 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (36) , e202501221
Aryl Shift Rearrangement in Scholl‐Type Reaction Toward Nanographene
Oxidative dehydrogenation, known as Scholl reaction, is a powerful method for synthesizing many polycyclic aromatic hydrocarbons. Sometimes, unexpected rearrangements can lead to the formation of new structures that are usually difficult to obtain. Here, we discover a novel Scholl‐type reaction involving both 1,4‐aryl‐ and 1,2‐aryl shift rearrangements, resulting in the production of armchair nanographene. Additionally, we establish the principle of the rearrangement mechanism through thermodynamic and kinetic studies using density functional theory (DFT). Theoretical studies indicate that the rearrangement reaction involves both arenium cation‐ and radical cation mechanisms. The selection of arenium cation‐ or radical cation mechanisms depends on the sizes and positions of the shifting aryl groups. Large biphenyl or triphenylenyl groups undergo the arenium cation mechanism, while a small monophenyl group favors the radical cation mechanism. Our findings offer new insights into the controllable rearrangements in Scholl reaction and provide new synthetic methods for obtaining a variety of polycyclic aromatic hydrocarbons, which are typically challenging to design.
- 9 June 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (36) , e202501221
Aryl Shift Rearrangement in Scholl‐Type Reaction Toward Nanographene
Oxidative dehydrogenation, known as Scholl reaction, is a powerful method for synthesizing many polycyclic aromatic hydrocarbons. Sometimes, unexpected rearrangements can lead to the formation of new structures that are usually difficult to obtain. Here, we discover a novel Scholl‐type reaction involving both 1,4‐aryl‐ and 1,2‐aryl shift rearrangements, resulting in the production of armchair nanographene. Additionally, we establish the principle of the rearrangement mechanism through thermodynamic and kinetic studies using density functional theory (DFT). Theoretical studies indicate that the rearrangement reaction involves both arenium cation‐ and radical cation mechanisms. The selection of arenium cation‐ or radical cation mechanisms depends on the sizes and positions of the shifting aryl groups. Large biphenyl or triphenylenyl groups undergo the arenium cation mechanism, while a small monophenyl group favors the radical cation mechanism. Our findings offer new insights into the controllable rearrangements in Scholl reaction and provide new synthetic methods for obtaining a variety of polycyclic aromatic hydrocarbons, which are typically challenging to design.
- 12 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (8) , 4086-4096
Oxygen-Doped Graphene Nanoribbons with High Catalytic Performance in Chemical Etching of Silicon
- 12 February 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (8) , 4086-4096
Oxygen-Doped Graphene Nanoribbons with High Catalytic Performance in Chemical Etching of Silicon
- Open Access
- 7 January 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (6)
Photo‐Assisted Bottom‐Up Synthesis of Orange Phosphorus
A tubular strand of phosphorus composed of vectorially aligned pentagons has been theoretically predicted as a new allotrope of phosphorus with a polar structure, expecting potential applications. However, it has not been successfully synthesized yet due to the difficulty of creating isolated strands to avoid interchain bonding. Here, such an allotrope named “orange phosphorus“ was successfully produced using a photo‐assisted synthesis from an amorphous film of solution‐processable Na2P16 precursors. A green laser irradiation initiated the phase transition of precursors, inducing chemical reactions like topochemical polymerization and rearrangement, creating a 1D chain of orange phosphorus. 3D electron diffraction crystallography showed that the molecular structure of orange phosphorus consists of one‐dimensional polar pentagonal‐tubes made up of [P8]P2[ repeat units. Orange phosphorus demonstrates excellent piezoresistivity due to its high strain‐sensitive 1D chain structure, showing strain‐induced Raman shifts. Its gauge factor exceeds those of 2D materials such as black phosphorus and transition metal dichalcogenides. These findings indicate that orange phosphorus has great potential for use in strain sensor applications.
- 7 January 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (6)
Open AccessPhoto‐Assisted Bottom‐Up Synthesis of Orange Phosphorus
A tubular strand of phosphorus composed of vectorially aligned pentagons has been theoretically predicted as a new allotrope of phosphorus with a polar structure, expecting potential applications. However, it has not been successfully synthesized yet due to the difficulty of creating isolated strands to avoid interchain bonding. Here, such an allotrope named “orange phosphorus“ was successfully produced using a photo‐assisted synthesis from an amorphous film of solution‐processable Na2P16 precursors. A green laser irradiation initiated the phase transition of precursors, inducing chemical reactions like topochemical polymerization and rearrangement, creating a 1D chain of orange phosphorus. 3D electron diffraction crystallography showed that the molecular structure of orange phosphorus consists of one‐dimensional polar pentagonal‐tubes made up of [P8]P2[ repeat units. Orange phosphorus demonstrates excellent piezoresistivity due to its high strain‐sensitive 1D chain structure, showing strain‐induced Raman shifts. Its gauge factor exceeds those of 2D materials such as black phosphorus and transition metal dichalcogenides. These findings indicate that orange phosphorus has great potential for use in strain sensor applications.
- Open Access
- 7 January 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (6) , e202421571
Photo‐Assisted Bottom‐Up Synthesis of Orange Phosphorus
A tubular strand of phosphorus composed of vectorially aligned pentagons has been theoretically predicted as a new allotrope of phosphorus with a polar structure, expecting potential applications. However, it has not been successfully synthesized yet due to the difficulty of creating isolated strands to avoid interchain bonding. Here, such an allotrope named “orange phosphorus“ was successfully produced using a photo‐assisted synthesis from an amorphous film of solution‐processable Na2P16 precursors. A green laser irradiation initiated the phase transition of precursors, inducing chemical reactions like topochemical polymerization and rearrangement, creating a 1D chain of orange phosphorus. 3D electron diffraction crystallography showed that the molecular structure of orange phosphorus consists of one‐dimensional polar pentagonal‐tubes made up of [P8]P2[ repeat units. Orange phosphorus demonstrates excellent piezoresistivity due to its high strain‐sensitive 1D chain structure, showing strain‐induced Raman shifts. Its gauge factor exceeds those of 2D materials such as black phosphorus and transition metal dichalcogenides. These findings indicate that orange phosphorus has great potential for use in strain sensor applications.
- 7 January 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (6) , e202421571
Open AccessPhoto‐Assisted Bottom‐Up Synthesis of Orange Phosphorus
A tubular strand of phosphorus composed of vectorially aligned pentagons has been theoretically predicted as a new allotrope of phosphorus with a polar structure, expecting potential applications. However, it has not been successfully synthesized yet due to the difficulty of creating isolated strands to avoid interchain bonding. Here, such an allotrope named “orange phosphorus“ was successfully produced using a photo‐assisted synthesis from an amorphous film of solution‐processable Na2P16 precursors. A green laser irradiation initiated the phase transition of precursors, inducing chemical reactions like topochemical polymerization and rearrangement, creating a 1D chain of orange phosphorus. 3D electron diffraction crystallography showed that the molecular structure of orange phosphorus consists of one‐dimensional polar pentagonal‐tubes made up of [P8]P2[ repeat units. Orange phosphorus demonstrates excellent piezoresistivity due to its high strain‐sensitive 1D chain structure, showing strain‐induced Raman shifts. Its gauge factor exceeds those of 2D materials such as black phosphorus and transition metal dichalcogenides. These findings indicate that orange phosphorus has great potential for use in strain sensor applications.
- Open Access
- 29 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Electrochemical on-surface synthesis of a strong electron-donating graphene nanoribbon catalyst
On-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) has attracted much attention. However, producing such GNRs on a large scale through on-surface synthesis under ultra-high vacuum on thermally activated metal surfaces has been challenging. This is mainly due to the decomposition of functional groups at temperatures of 300 to 500 °C and limited monolayer GNR growth based on the metal catalysis. To overcome these obstacles, we developed an on-surface electrochemical technique that utilizes redox reactions of asymmetric precursors at an electric double layer where a strong electric field is confined to the liquid-solid interface. We successfully demonstrate layer-by-layer growth of strong electron-donating GNRs on electrodes at temperatures <80 °C without decomposing functional groups. We show that high-voltage facilitates previously unknown heterochiral di-cationic polymerization. Electrochemically produced GNRs exhibiting one of the strongest electron-donating properties known, enable extraordinary silicon-etching catalytic activity, exceeding those of noble metals, with superior photoconductive properties. Our technique advances the possibility of producing various edge-functional GNRs.
- 29 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessElectrochemical on-surface synthesis of a strong electron-donating graphene nanoribbon catalyst
On-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) has attracted much attention. However, producing such GNRs on a large scale through on-surface synthesis under ultra-high vacuum on thermally activated metal surfaces has been challenging. This is mainly due to the decomposition of functional groups at temperatures of 300 to 500 °C and limited monolayer GNR growth based on the metal catalysis. To overcome these obstacles, we developed an on-surface electrochemical technique that utilizes redox reactions of asymmetric precursors at an electric double layer where a strong electric field is confined to the liquid-solid interface. We successfully demonstrate layer-by-layer growth of strong electron-donating GNRs on electrodes at temperatures <80 °C without decomposing functional groups. We show that high-voltage facilitates previously unknown heterochiral di-cationic polymerization. Electrochemically produced GNRs exhibiting one of the strongest electron-donating properties known, enable extraordinary silicon-etching catalytic activity, exceeding those of noble metals, with superior photoconductive properties. Our technique advances the possibility of producing various edge-functional GNRs.
- 15 July 2024
- Published by Wiley in Chempluschem
- Vol. 89 (7)
Front Cover: On‐Surface Fabrication toward Polar 2D Macromolecular Crystals (ChemPlusChem 7/2024)
- 15 July 2024
- Published by Wiley in Chempluschem
- Vol. 89 (7)
Front Cover: On‐Surface Fabrication toward Polar 2D Macromolecular Crystals (ChemPlusChem 7/2024)
- 28 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (27) , 35053-35062
Surface-Modified Ruthenium Nanorods for an Ampere-Level Bifunctional Hydrogen Evolution Reaction/Oxygen Evolution Reaction Electrocatalyst
The practical applications of bifunctional ruthenium-based electrocatalysts with two active sites of Ru nanoparticles covered with RuO2 skins are limited. One reason is the presence of multiple equally distributed facets, some of which are inactive. In contrast, ruthenium nanorods with a high aspect ratio have multiple unequally distributed facets containing the dominance of active faces for efficient electrocatalysis. However, the synthesis of ruthenium nanorods has not been achieved due to difficulties in controlling the growth. Additionally, it is known that the adsorption capacity of intermediates can be impacted by the surface of the catalyst. Inspired by these backgrounds, the surface-modified (SM) ruthenium nanorods having a dominant active facet of hcp (100) through chemisorbed oxygen and OH groups (SMRu-NRs@NF) are rationally synthesized through the surfactant coordination method. SMRu-NRs@NF exhibits excellent hydrogen evolution in acid and alkaline solutions with an ultralow overpotential of 215 and 185 mV reaching 1000 mA cm-2, respectively. Moreover, it has also shown brilliant oxygen evolution electrocatalysis in alkaline solution with a low potential of 1.58 V to reach 1000 mA cm-2. It also exhibits high durability over 143 h for the evolution of oxygen and hydrogen at 1000 mA cm-2. Density functional theory studies confirmed that surface modification of a ruthenium nanorod with chemisorbed oxygen and OH groups can optimize the reaction energy barriers of hydrogen and oxygen intermediates. The surface-modified ruthenium nanorod strategy paves a path to develop the practical water splitting electrocatalyst.
- 28 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (27) , 35053-35062
Surface-Modified Ruthenium Nanorods for an Ampere-Level Bifunctional Hydrogen Evolution Reaction/Oxygen Evolution Reaction Electrocatalyst
The practical applications of bifunctional ruthenium-based electrocatalysts with two active sites of Ru nanoparticles covered with RuO2 skins are limited. One reason is the presence of multiple equally distributed facets, some of which are inactive. In contrast, ruthenium nanorods with a high aspect ratio have multiple unequally distributed facets containing the dominance of active faces for efficient electrocatalysis. However, the synthesis of ruthenium nanorods has not been achieved due to difficulties in controlling the growth. Additionally, it is known that the adsorption capacity of intermediates can be impacted by the surface of the catalyst. Inspired by these backgrounds, the surface-modified (SM) ruthenium nanorods having a dominant active facet of hcp (100) through chemisorbed oxygen and OH groups (SMRu-NRs@NF) are rationally synthesized through the surfactant coordination method. SMRu-NRs@NF exhibits excellent hydrogen evolution in acid and alkaline solutions with an ultralow overpotential of 215 and 185 mV reaching 1000 mA cm-2, respectively. Moreover, it has also shown brilliant oxygen evolution electrocatalysis in alkaline solution with a low potential of 1.58 V to reach 1000 mA cm-2. It also exhibits high durability over 143 h for the evolution of oxygen and hydrogen at 1000 mA cm-2. Density functional theory studies confirmed that surface modification of a ruthenium nanorod with chemisorbed oxygen and OH groups can optimize the reaction energy barriers of hydrogen and oxygen intermediates. The surface-modified ruthenium nanorod strategy paves a path to develop the practical water splitting electrocatalyst.
- Open Access
- 24 June 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 14 (15) , 4256-4263
Ampere-level oxygen evolution reaction driven by Co 3 O 4 nanoparticles supported on layered TiO 2
The Co 3 O 4 nanoparticles supported on a layered TiO 2 surface by Co–O–Ti covalent bond towards the highly active ampere-level oxygen evolution reaction.
- 24 June 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 14 (15) , 4256-4263
Open AccessAmpere-level oxygen evolution reaction driven by Co 3 O 4 nanoparticles supported on layered TiO 2
The Co 3 O 4 nanoparticles supported on a layered TiO 2 surface by Co–O–Ti covalent bond towards the highly active ampere-level oxygen evolution reaction.
- Open Access
- 19 March 2024
- Published by Wiley in Chempluschem
- Vol. 89 (7) , e202300775
On‐Surface Fabrication toward Polar 2D Macromolecular Crystals
Polar 2D macromolecular structures have attracted significant attention because of their ferroelectricity and ferro‐magnetism. However, it is challenging to synthesize them experimentally because dipoles or spins of these macromolecules tend to cancel each other. So far, there has been no successful strategy for assembling macromolecules in a unidirectional manner, achieving stereoregular polymerization on metal surfaces, and creating polar 2D polymer crystals. Recent progress in molecular assembly, on‐surface polymer synthesis, and direct control of molecules using electric field applications provides an opportunity to develop such strategies. In this regard, we first review past studies on chiral and achiral molecular assembly, on‐surface polymer synthesis, and orientation control of polar molecules. Then, we discuss our newly developed approach called “vectorial on‐surface synthesis”, which is based on “dynamic chirality” of compass precursors, stereoselective polymerization, and favorable interchain interactions originating from CH‐π interactions. Finally, we conclude with a prospective outlook.
- 19 March 2024
- Published by Wiley in Chempluschem
- Vol. 89 (7) , e202300775
Open AccessOn‐Surface Fabrication toward Polar 2D Macromolecular Crystals
Polar 2D macromolecular structures have attracted significant attention because of their ferroelectricity and ferro‐magnetism. However, it is challenging to synthesize them experimentally because dipoles or spins of these macromolecules tend to cancel each other. So far, there has been no successful strategy for assembling macromolecules in a unidirectional manner, achieving stereoregular polymerization on metal surfaces, and creating polar 2D polymer crystals. Recent progress in molecular assembly, on‐surface polymer synthesis, and direct control of molecules using electric field applications provides an opportunity to develop such strategies. In this regard, we first review past studies on chiral and achiral molecular assembly, on‐surface polymer synthesis, and orientation control of polar molecules. Then, we discuss our newly developed approach called “vectorial on‐surface synthesis”, which is based on “dynamic chirality” of compass precursors, stereoselective polymerization, and favorable interchain interactions originating from CH‐π interactions. Finally, we conclude with a prospective outlook.