Aleksandr I. Buglakov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksandr I. Buglakov has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Victorovich Chertovich
Semenov Federal Research Center for Chemical Physics, Kosygina 4, 119991 Moscow, Russia
4 shared publications - Dimitri A. Ivanov
Department of Chemistry, Lomonosov Moscow State University, Leninskie Gory 1-3, Moscow 119991, Russia
3 shared publications V. A. Ivanov
Moscow State University, Department of Physics, Moscow, Russia
3 shared publications- Valentina V. Vasilevskaya
A. N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS) 1 , Vavilov Str. 28, Bld. 1, 119334 Moscow
3 shared publications - Ainur F. Abukaev
Institut für Angewandte Physik Universität Tübingen Tübingen Germany
2 shared publications - Alina V. Maryasevskaya
Faculty of Chemistry, Lomonosov Moscow State University, GSP-1, 1-3 Leninskiye Gory, 119991 Moscow, Russia
2 shared publications
Latest Publications
- Open Access
Morphological Peculiarities of Active and Partially Active Microgels
Active polymer gels provide useful models for biological and synthetic nonequilibrium soft matter, yet most theoretical and simulation studies of such systems have focused on effectively infinite active networks and have therefore neglected free-surface effects. Here, we use coarse-grained computer simulations within the active Brownian particle framework to investigate single microgels in which activity is assigned directly to individual monomer units. We examine the effects of subchain length, active-monomer fraction, localization of activity on subchains or cross-links, and radial distributions of active units. Activity induces pronounced microgel compression, which becomes stronger with increasing subchain length and, among the systems studied, reaches its greatest magnitude at a low active fraction of 5%. The collapsed structures can exhibit a dense, heterogeneous core surrounded by a shell of strongly extended subchains. Activity localized at cross-links produces substantially weaker compression than activity distributed along subchains, whereas surface-localized activity enhances collapse and core-localized activity suppresses it. By mapping the Péclet number onto an effective Flory–Huggins parameter, we show that the swelling behavior of partially active microgels near the θ point can be related to Flory–Rehner theory, although important structural differences from passive collapse remain.
Open AccessMorphological Peculiarities of Active and Partially Active Microgels
Active polymer gels provide useful models for biological and synthetic nonequilibrium soft matter, yet most theoretical and simulation studies of such systems have focused on effectively infinite active networks and have therefore neglected free-surface effects. Here, we use coarse-grained computer simulations within the active Brownian particle framework to investigate single microgels in which activity is assigned directly to individual monomer units. We examine the effects of subchain length, active-monomer fraction, localization of activity on subchains or cross-links, and radial distributions of active units. Activity induces pronounced microgel compression, which becomes stronger with increasing subchain length and, among the systems studied, reaches its greatest magnitude at a low active fraction of 5%. The collapsed structures can exhibit a dense, heterogeneous core surrounded by a shell of strongly extended subchains. Activity localized at cross-links produces substantially weaker compression than activity distributed along subchains, whereas surface-localized activity enhances collapse and core-localized activity suppresses it. By mapping the Péclet number onto an effective Flory–Huggins parameter, we show that the swelling behavior of partially active microgels near the θ point can be related to Flory–Rehner theory, although important structural differences from passive collapse remain.
- 27 July 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (4)
Topology-directed optimization of block copolymer architecture for self-assembly into spherical vesicles using machine learning
Amphiphilic block copolymers are a promising class of macromolecules used for creating new functional containers for delivering active agents into the cells. The diversity of these macromolecules' architectures allows for the selection of the necessary system parameters to generate the desired morphologies of these containers. Where the standard grid-search approach proves costly, optimization algorithms can directly search for the desired structure using a data-aware approach. The challenge here lies in the numerical characterization of such vesicles with a single objective function, that is, finding a functional capable of indicating the degree of proximity of the aggregate to the desired class of structures, for example, vesicles. This paper describes a novel pipeline for the topology-directed search for molecular parameters that enable the spontaneous formation of spherical vesicles in a system of amphiphilic comb–coil copolymers with variable architectural and solvent parameters within simulations. A key feature of the presented method is the use of a probabilistic classification model, trained on ideal structures, as a functional describing the “vesicularity” of the aggregate obtained in the point-based simulation. The classification of structures is based on topological data analysis, and, as shown, topological characteristics are sufficient to accurately distinguish typical structures self-assembling in solutions of amphiphilic macromolecules. Optimization of this probabilistic functional using a classic Bayesian optimization algorithm allows finding parameters consistent with spherical vesicle formation in a reasonable number of iterations. By design, the usage of this methodology is not restricted by the considered class of polymers and can be applied to other simulated macromolecular systems.
- 27 July 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (4)
Topology-directed optimization of block copolymer architecture for self-assembly into spherical vesicles using machine learning
Amphiphilic block copolymers are a promising class of macromolecules used for creating new functional containers for delivering active agents into the cells. The diversity of these macromolecules' architectures allows for the selection of the necessary system parameters to generate the desired morphologies of these containers. Where the standard grid-search approach proves costly, optimization algorithms can directly search for the desired structure using a data-aware approach. The challenge here lies in the numerical characterization of such vesicles with a single objective function, that is, finding a functional capable of indicating the degree of proximity of the aggregate to the desired class of structures, for example, vesicles. This paper describes a novel pipeline for the topology-directed search for molecular parameters that enable the spontaneous formation of spherical vesicles in a system of amphiphilic comb–coil copolymers with variable architectural and solvent parameters within simulations. A key feature of the presented method is the use of a probabilistic classification model, trained on ideal structures, as a functional describing the “vesicularity” of the aggregate obtained in the point-based simulation. The classification of structures is based on topological data analysis, and, as shown, topological characteristics are sufficient to accurately distinguish typical structures self-assembling in solutions of amphiphilic macromolecules. Optimization of this probabilistic functional using a classic Bayesian optimization algorithm allows finding parameters consistent with spherical vesicle formation in a reasonable number of iterations. By design, the usage of this methodology is not restricted by the considered class of polymers and can be applied to other simulated macromolecular systems.
- 13 December 2025
- Published by Elsevier in European Polymer Journal
- Vol. 242
Structure and gelation properties of thermoresponsive bottlebrush hydrogels
- 13 December 2025
- Published by Elsevier in European Polymer Journal
- Vol. 242
Structure and gelation properties of thermoresponsive bottlebrush hydrogels
- Open Access
Polymer Systems with Correlated Activity: Stars Versus Linear Chains
Using molecular dynamics simulations, we explore the impact of correlated monomer activity and star topology on the structure and dynamics of active polymers. Unlike uncorrelated active Brownian particle (ABP) stars, correlated activity induces a rather steep stretching of the star polymer at intermediate activity levels. This stretching is characterized by transitions between distinct, metastable states defined by the coordinated movement of the arms, leading to novel collective dynamics. The behavior is consistent with experimental observations of active oligomers, highlighting the critical role of activity correlations for the understanding and modeling of active polymers.
Open AccessPolymer Systems with Correlated Activity: Stars Versus Linear Chains
Using molecular dynamics simulations, we explore the impact of correlated monomer activity and star topology on the structure and dynamics of active polymers. Unlike uncorrelated active Brownian particle (ABP) stars, correlated activity induces a rather steep stretching of the star polymer at intermediate activity levels. This stretching is characterized by transitions between distinct, metastable states defined by the coordinated movement of the arms, leading to novel collective dynamics. The behavior is consistent with experimental observations of active oligomers, highlighting the critical role of activity correlations for the understanding and modeling of active polymers.
- 22 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
How to control a polymer conformation using active forces and sequence design
Active monomer units capable of absorbing external energy and converting it into directed translational motion drive polymers to a peculiar nonequilibrium self-ordering even in the absence of other specific interactions. Such polymers are of interest both for understanding the functioning of molecular biological systems and for creating new synthetic responsive materials. In this paper, we study the conformational behavior of active copolymers containing both active and passive repeating units with random and regular distributions along the chain. Using molecular dynamics simulations, we have shown that even a small fraction of active beads is sufficient for the collapse of the polymer. The influence of the active unit fraction and the length of the repeating block on the conformational characteristics of the copolymers is determined. We have shown that the presented phenomena are qualitatively independent of the chosen activity model and are likely to be universal.
- 22 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
How to control a polymer conformation using active forces and sequence design
Active monomer units capable of absorbing external energy and converting it into directed translational motion drive polymers to a peculiar nonequilibrium self-ordering even in the absence of other specific interactions. Such polymers are of interest both for understanding the functioning of molecular biological systems and for creating new synthetic responsive materials. In this paper, we study the conformational behavior of active copolymers containing both active and passive repeating units with random and regular distributions along the chain. Using molecular dynamics simulations, we have shown that even a small fraction of active beads is sufficient for the collapse of the polymer. The influence of the active unit fraction and the length of the repeating block on the conformational characteristics of the copolymers is determined. We have shown that the presented phenomena are qualitatively independent of the chosen activity model and are likely to be universal.
- Open Access
- 14 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (20) , 13455-13470
From Computer Simulation to Synthesis of Highly Lithium-Ion Conductive Block Copolymers with Bicontinuous Morphology
- 14 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (20) , 13455-13470
Open AccessFrom Computer Simulation to Synthesis of Highly Lithium-Ion Conductive Block Copolymers with Bicontinuous Morphology
- 10 December 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (3) , 1691-1700
Motility-induced collapse of an active Brownian particle polymer chain
The ability of monomer units to transform energy into translational movements brings peculiar order into nonequlibrium active polymer.
- 10 December 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (3) , 1691-1700
Motility-induced collapse of an active Brownian particle polymer chain
The ability of monomer units to transform energy into translational movements brings peculiar order into nonequlibrium active polymer.
- Open Access
- 29 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Monomer activity solely induces collapse of polymer chain in a good solvent
Ability of particles to transform absorbed energy into translational movements brings peculiar orderings into the nonequilibrium matter. Connected together into the chain, these particles collectively behave completely different from well-known equilibrium polymers. Interestingly, one can find examples of active chains within cells. It is now proposed that activity, induced by molecular motor proteins play a key role in packing of chromatin within the cell nucleus. Here we demonstrate the ability of the self-propulsion monomer units to cause polymer collapse under conditions where there is no explicit attraction between particles. The resulting conformation is heterogeneous and is characterized by a dense condensed core surrounded by elongated loops. The polymer segments in the condense phase have crumpled packing. Using molecular dynamics analysis, we show that this effect is similar to well-known motility induced phase separation, but more pronounced in active chains due to the polymers lack of entropy.
- 29 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMonomer activity solely induces collapse of polymer chain in a good solvent
Ability of particles to transform absorbed energy into translational movements brings peculiar orderings into the nonequilibrium matter. Connected together into the chain, these particles collectively behave completely different from well-known equilibrium polymers. Interestingly, one can find examples of active chains within cells. It is now proposed that activity, induced by molecular motor proteins play a key role in packing of chromatin within the cell nucleus. Here we demonstrate the ability of the self-propulsion monomer units to cause polymer collapse under conditions where there is no explicit attraction between particles. The resulting conformation is heterogeneous and is characterized by a dense condensed core surrounded by elongated loops. The polymer segments in the condense phase have crumpled packing. Using molecular dynamics analysis, we show that this effect is similar to well-known motility induced phase separation, but more pronounced in active chains due to the polymers lack of entropy.
- Open Access
Synthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behavior
This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2–tetrafluoro–2–(1,1,2,2–tetrafluoro–4–iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2–tetrafluoro–2–(1,1,2,2–tetrafluoro–2–iodoethoxy)ethanesulfonyl fluoride, achieving a 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.
Open AccessSynthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behavior
This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2–tetrafluoro–2–(1,1,2,2–tetrafluoro–4–iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2–tetrafluoro–2–(1,1,2,2–tetrafluoro–2–iodoethoxy)ethanesulfonyl fluoride, achieving a 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.
- Open Access
- 6 November 2023
- Published by MDPI AG in Preprints.org
Synthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behaviour
This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-4-iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-2-iodoethoxy)ethanesulfonyl fluoride, achieving an 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.
- 6 November 2023
- Published by MDPI AG in Preprints.org
Open AccessSynthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behaviour
This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-4-iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-2-iodoethoxy)ethanesulfonyl fluoride, achieving an 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.