ABAbdellali Bouzenzana

Abdellali Bouzenzana

*This is an algorithmically generated author record based on publicly available information.

Abdellali Bouzenzana has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of the behavior and distribution of mercury and associated heavy metals in contaminated soils from an abandoned mercury complex in the Azzaba region (Northeast Algeria)

    by Rania Sbaghdi, Abdellali Bouzenzana, Hani Bouyahmed, Abdelfettah Gherib, Samir Chekchaki, Iness Braham

    This research is about the mercury and toxic metals pollution caused by the mining processes of cinnabar deposits at Ismail abandoned mercury complex in Algeria. This complex has caused many health and environmental problems in Azzaba area. The effect has continued to date with the presence of toxic elements even after almost 20 years since the site closed. Planning for remediation was never considered. However, this study aims to characterize the soil, by mercury and associated metals concentrations and physicochemical parameters. Also, to evaluate the behavior and distribution of toxic elements in samples based on the physicochemical parameters of the environment. The results show that all samples have a high level of toxic metals (Hg, Zn, Pb, As, Cr, Cu, and Sb) with averages in ppm, respectively (1526, 8421, 4372, 238, 134, 389, 124), these concentrations exceed standards, which increase the environmental risks. The statistical results show a correlation between pH–(Zn, Pb, Cr), Ec–(Pb, Cr and Cu), CEC–(Zn, Cu and As), OM–Zn and CaCO3–(Zn, Pb, Cr, Cu and Sb) indicate that physicochemical parameters can affect the behavior and the mobility of metals. Except for Hg, which behaves in a particular way. In addition, according to ANOVA tests, Hg and As are evenly distributed throughout the study area. Unlike other metals, Pb, Cu and Sb to move to the surrounding soil or accumulate at a distance of 150 m while Zn and Cr accumulate in the upper part of the waste dump. This research investigates how toxic elements disperse or accumulate, make an assumption about their geochemical origin, and analyses their interactions with different soil characteristics. In addition, it contributes to the assessment of environmental risks and provides a relevant scientific support for planning appropriate decontamination and site restoration strategies.

  • Use of natural phosphate wastes in the manufacture of construction bricks

    by T Tahri, N Bezzi, A Bouzenzana, K. M Benghadab, A Benselhoub

    Purpose. Valorization of phosphate waste and diversification of the range of bricks by improving their mechanical properties. In this context, our work focused on the use of phosphate wastes from Djebel Onk (Tebessa) combined with clays from the Sidi Aich region (Bejaia) to manufacture a new variety of brick. The principle consists in varying the percentage of these wastes and the firing temperature. Methodology. After mechanical preparation in the laboratory, which consists of crushing, grinding and sieving operations, the two materials of phosphate and clays are characterized by several analysis techniques (XRD, IR and XRF). The brick manufacturing tests from these two materials were carried out for different weight percentages and for different firing temperatures. Findings. The combination of these two materials constitutes a new approach to the recovery of natural phosphates, which has a very high waste rate. Tests of making bricks from these two materials have yielded promising results. From a mechanical point of view, the best flexural strengths obtained at a temperature of 900 C vary from 3 to 5 MPa depending on the type of phosphate/clay mixture. The same goes for the compressive strength, which varies from 15 to 27 MPa depending on the type of mixture as well. These results conform to ASTM-C674, 1999 construction standards. Originality. The use of natural phosphate wastes from Djebel Onk in various proportions has resulted in a quality of brick that meets the international standards. Practical value. The mechanical properties of the brick made from these two materials, such as resistance to bending and compression constitutes a real significant recovery for the phosphate wastes from Djebel Onk.


  • Composition and processing of sulphide lead-zinc ores from Chaabet El-Hamra mine (Setif, Algeria)

    by M Bourourou, A Bouzenzana, T Batouche, A Benselhoub

    Purpose. In order to fully exploit the metal and facilitate its method of processing, we need an accurate knowledge of its composition, granular distribution, and association with unimportant and penalizing elements that we would like to get rid of, compared to the distribution of the element to extract by flotation method. Methodology. The present experimental work proposes an approach to the mineralogical, chemical and particle size characterization, several analyzes have been carried out by Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS), X-ray Diffraction (XRD), Optical Microscopy (OM), Particle Size-Fraction Analysis (PSFA), and X-ray Fluorescence (XRF). These analyzes were submitted on samples of lead-zinc of different sizes as well as well-prepared fine powder of this ore; the zinc content of the raw material is about 5% Zn. Findings. The results obtained by the mineralogical characterization and the particle size analysis reveal a very varied and irregular texture of the ore, consisting mainly of sulphides (sphalerite, galena, pyrite, marcasite), associated with carbonate gangue, mainly dolomite and calcite. The theoretical dimensions of the particles found in the fine grain size classes [-1 +0.053] mm. In addition, the conditions of the pulp using the following reagents: CuSO4 activator, PAX collector, CaO regulator and the pine oil foamed, along with a pH modifier between 10.5 and 12 (11.8 optimal), improve the content of sulphide minerals, and increased the concentrate of sphalerite (ZnS) by foam Flotation with a maximum recovery and economically appropriate content (54% Zn concentrate). Originality. Depending on the results of the analysis performed and the complete collection of data obtained in the laboratory, we aim to optimize the process of treating lead-zinc sulphide ore and give a more detailed reference source to specialists, researchers and metallurgists in field of mining in general and in the treatment of polymetallic lead-zinc ore in the area studied in particular. Practical value. Benefit the values of beneficial minerals (concentrate of zinc and others sulphide), from different types of raw materials. The latter focuses on flotation as the main successful technique in the extraction of this type of lead-zinc minerals, but it requires constant research and careful examination of its elements and values in order to excel in this field of polymetallic-sulphide ore processing.