Falk Dettinger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Falk Dettinger has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
M. Weiß
2 shared publicationsM. Weyrich
2 shared publicationsMichael Weyrich
IAS - University of Stuttgart
2 shared publicationsN. Jazdi
2 shared publicationsNasser Jazdi
IAS - University of Stuttgart
2 shared publications- Akshay Narla
Institute of Industrial Automation and Software Engineering, University of Stuttgart, Stuttgart, Germany
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 94062-94085
Mapping the Software-Defined Vehicle Landscape: Use Cases, Technologies, and Expert Insights
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 94062-94085
Open AccessMapping the Software-Defined Vehicle Landscape: Use Cases, Technologies, and Expert Insights
- 26 June 2023
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Machine-Learning-Based Fault Detection in Electric Vehicle Powertrains Using a Digital Twin
Electric Vehicles are subject to effects that lead to more or less rapid degradation of functions. This can cause hazards for the drivers and uninvolved road participants. For this reason, the must be detected and mitigated, to maintain the vehicle function even in critical situations until a safe operating mode can be established. This publication presents an intelligent digital twin, located in the edge and connected with an electric vehicle via 5G. That can improve the operation of electrified vehicles by enabling the online detection of abnormal situations in the electrified powertrain and vehicle dynamics. Its core component is the fault detection system, which is implemented based on a 1-Nearest Neighbor algorithm. It is initially trained on synthetic data, generated in CarMaker for real-world powertrain issues such as demagnetization and open-/short-switch failures, using detailed mathematical models. In this context 139 simulations were performed with three different velocities (10 km/h, 18 km/h and unlimited) in sum. Thereby 36 variables were recorded in each simulation. This leads to a total number of 953,534 data points. Out of this, 77 % are used for training and 23 % are used for validation. Based on the detected fault, a self-healing strategy is applied. Therefore, a look-up table, also located in the edge, is used to limit the motor torque to predefined levels. During the evaluation two major results are shown. The fault is well detected after a short detection time, but situations like accelerating or braking shows a similar signal behavior like the considered faults, leading to false positives. The effect of a fault can be mitigated by an online self-healing approach located in the edge in nearly real time. For connected vehicles, it seems realistic to apply an online digital twin enabling the fault detection and mitigation to the edge.
- 26 June 2023
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Machine-Learning-Based Fault Detection in Electric Vehicle Powertrains Using a Digital Twin
Electric Vehicles are subject to effects that lead to more or less rapid degradation of functions. This can cause hazards for the drivers and uninvolved road participants. For this reason, the must be detected and mitigated, to maintain the vehicle function even in critical situations until a safe operating mode can be established. This publication presents an intelligent digital twin, located in the edge and connected with an electric vehicle via 5G. That can improve the operation of electrified vehicles by enabling the online detection of abnormal situations in the electrified powertrain and vehicle dynamics. Its core component is the fault detection system, which is implemented based on a 1-Nearest Neighbor algorithm. It is initially trained on synthetic data, generated in CarMaker for real-world powertrain issues such as demagnetization and open-/short-switch failures, using detailed mathematical models. In this context 139 simulations were performed with three different velocities (10 km/h, 18 km/h and unlimited) in sum. Thereby 36 variables were recorded in each simulation. This leads to a total number of 953,534 data points. Out of this, 77 % are used for training and 23 % are used for validation. Based on the detected fault, a self-healing strategy is applied. Therefore, a look-up table, also located in the edge, is used to limit the motor torque to predefined levels. During the evaluation two major results are shown. The fault is well detected after a short detection time, but situations like accelerating or braking shows a similar signal behavior like the considered faults, leading to false positives. The effect of a fault can be mitigated by an online self-healing approach located in the edge in nearly real time. For connected vehicles, it seems realistic to apply an online digital twin enabling the fault detection and mitigation to the edge.
- 1 January 2023
- Published by VDI Media GmbH
- p. 513-524
Dateneffiziente Vervollständigung des Umgebungsmodells von autonomen vernetzten Systemen mittels Sensorfusion
Vorwort Nur noch sieben Jahre bis 2030, dem Jahr, in dem wichtige Meilensteine der EU- und der deutschen Klimapolitik sowie vieler Industrieunternehmen au…
- 1 January 2023
- Published by VDI Media GmbH
- p. 513-524
Dateneffiziente Vervollständigung des Umgebungsmodells von autonomen vernetzten Systemen mittels Sensorfusion
Vorwort Nur noch sieben Jahre bis 2030, dem Jahr, in dem wichtige Meilensteine der EU- und der deutschen Klimapolitik sowie vieler Industrieunternehmen au…
- 1 January 2023
- Published by VDI Media GmbH
- p. 487-500
DevOps als Enabler der kontinuierlichen Funktionsverbesserung und automatisierten Update-Analyse in software-definierten Systemen
Vorwort Nur noch sieben Jahre bis 2030, dem Jahr, in dem wichtige Meilensteine der EU- und der deutschen Klimapolitik sowie vieler Industrieunternehmen au…
- 1 January 2023
- Published by VDI Media GmbH
- p. 487-500
DevOps als Enabler der kontinuierlichen Funktionsverbesserung und automatisierten Update-Analyse in software-definierten Systemen
Vorwort Nur noch sieben Jahre bis 2030, dem Jahr, in dem wichtige Meilensteine der EU- und der deutschen Klimapolitik sowie vieler Industrieunternehmen au…
- Open Access
- 26 May 2022
- Published by Elsevier in Procedia CIRP
- Vol. 107, 283-288
Trajectory Prediction of Workers to Improve AGV and AMR Operation based on the Manufacturing Schedule
- 26 May 2022
- Published by Elsevier in Procedia CIRP
- Vol. 107, 283-288
Open AccessTrajectory Prediction of Workers to Improve AGV and AMR Operation based on the Manufacturing Schedule
- Open Access
Non-Uniform Circumferential Expansion of Cylindrical Li-Ion Cells—The Potato Effect
This paper presents the non-uniform change in cell thickness of cylindrical Lithium (Li)-ion cells due to the change of State of Charge (SoC). Using optical measurement methods, with the aid of a laser light band micrometer, the expansion and contraction are determined over a complete charge and discharge cycle. The cell is rotated around its own axis by an angle of in each step, so that the different positions can be compared with each other over the circumference. The experimental data show that, contrary to the assumption based on the physical properties of electrode growth due to lithium intercalation in the graphite, the cell does not expand uniformly. Depending on the position and orientation of the cell coil, there are different zones of expansion and contraction. In order to confirm the non-uniform expansion around the circumference of the cell in 3D, X-ray computed tomography (CT) scans of the cells are performed at low and at high SoC. Comparison of the high resolution 3D reconstructed volumes clearly visualizes a sinusoidal pattern for non-uniform expansion. From the 3D volume, it can be confirmed that the thickness variation does not vary significantly over the height of the battery cell due to the observed mechanisms. However, a slight decrease in the volume change towards the poles of the battery cells due to the higher stiffness can be monitored.Open AccessNon-Uniform Circumferential Expansion of Cylindrical Li-Ion Cells—The Potato Effect
This paper presents the non-uniform change in cell thickness of cylindrical Lithium (Li)-ion cells due to the change of State of Charge (SoC). Using optical measurement methods, with the aid of a laser light band micrometer, the expansion and contraction are determined over a complete charge and discharge cycle. The cell is rotated around its own axis by an angle of in each step, so that the different positions can be compared with each other over the circumference. The experimental data show that, contrary to the assumption based on the physical properties of electrode growth due to lithium intercalation in the graphite, the cell does not expand uniformly. Depending on the position and orientation of the cell coil, there are different zones of expansion and contraction. In order to confirm the non-uniform expansion around the circumference of the cell in 3D, X-ray computed tomography (CT) scans of the cells are performed at low and at high SoC. Comparison of the high resolution 3D reconstructed volumes clearly visualizes a sinusoidal pattern for non-uniform expansion. From the 3D volume, it can be confirmed that the thickness variation does not vary significantly over the height of the battery cell due to the observed mechanisms. However, a slight decrease in the volume change towards the poles of the battery cells due to the higher stiffness can be monitored.