Lizhong Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lizhong Huang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Ruijin Wang
School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China
8 shared publications - Chun Shao
School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China
6 shared publications Chun Shao
4 shared publications- Jianzhong Lin
Zhejiang University
4 shared publications Jiayou Du
3 shared publications- Yang Li
School of Engineering Mechanics, Hangzhou Dianzi University, Hangzhou 310018, P. R. China
3 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Rheology-controlled motility modes of a single squirmer in pressure-driven power-law channel flow
Understanding how non-Newtonian rheology regulates the long-time motion of active particles in confined flows is important for microswimmer transport in biological and engineering fluids. We systematically investigate a single squirmer in pressure-driven power-law channel flow using the lattice Boltzmann method, independently varying the power-law index n, channel Reynolds number Rec, squirmer Reynolds number Res, and squirmer-type parameter β. Across 525 simulated cases, four long-time motility modes are identified: center-equilibrium, near-wall stable, directional oscillatory, and alternating oscillatory. Among the three rheological indices examined, the combined fraction of the two oscillatory modes is 31.4% at n=0.7, increases to 38.8% at n=1.0, and decreases to 25.7% at n=1.3, suggesting a non-monotonic variation within the sampled conditions. Meanwhile, the center-equilibrium fraction increases to 57.7% in the shear-thickening fluid, whereas alternating oscillation accounts for only 1.1% in the shear-thinning fluid. These results demonstrate that power-law rheology does not merely modify individual trajectories but systematically redistributes steady and periodic long-time modes. Phase portraits and local flow fields further support a rheology-mediated state-selection picture in which the power-law index reshapes the apparent-viscosity landscape and the coupling among wall interaction, self-propulsion, orientation, and lateral migration. This study establishes a four-parameter motility map and provides a dynamical framework for rheology-controlled active-particle transport in confined flows.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Rheology-controlled motility modes of a single squirmer in pressure-driven power-law channel flow
Understanding how non-Newtonian rheology regulates the long-time motion of active particles in confined flows is important for microswimmer transport in biological and engineering fluids. We systematically investigate a single squirmer in pressure-driven power-law channel flow using the lattice Boltzmann method, independently varying the power-law index n, channel Reynolds number Rec, squirmer Reynolds number Res, and squirmer-type parameter β. Across 525 simulated cases, four long-time motility modes are identified: center-equilibrium, near-wall stable, directional oscillatory, and alternating oscillatory. Among the three rheological indices examined, the combined fraction of the two oscillatory modes is 31.4% at n=0.7, increases to 38.8% at n=1.0, and decreases to 25.7% at n=1.3, suggesting a non-monotonic variation within the sampled conditions. Meanwhile, the center-equilibrium fraction increases to 57.7% in the shear-thickening fluid, whereas alternating oscillation accounts for only 1.1% in the shear-thinning fluid. These results demonstrate that power-law rheology does not merely modify individual trajectories but systematically redistributes steady and periodic long-time modes. Phase portraits and local flow fields further support a rheology-mediated state-selection picture in which the power-law index reshapes the apparent-viscosity landscape and the coupling among wall interaction, self-propulsion, orientation, and lateral migration. This study establishes a four-parameter motility map and provides a dynamical framework for rheology-controlled active-particle transport in confined flows.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Inertial migration and self-assembly of staggered spheroidal particle pairs in square duct flows
In this paper, a staggered spheroidal particle pair inside a three-dimensional duct Poiseuille flow with Reynolds number (Re) up to 120 is investigated via the lattice Boltzmann method. Validation tests show excellent agreement with numerical and experimental results obtained by other groups. The entire migration dynamics and the final equilibrium state of the oblate and prolate particle pairs are analyzed and compared to those of the spherical particle pairs. The effects of initial axial spacing, particle aspect ratio, and Re are explored herein. Simulation results indicate that spheroidal particles tend to distribute orderly in the streamwise direction after they reach the corresponding face equilibrium positions. A key finding is that the prolate particle pairs eventually tumble with periodic oscillating axial spacing. Present results reveal that the initial axial spacing does not influence the equilibrium positions and interparticle spacings of spheroidal particle pairs. However, it does affect the migration process from the initial to the final stable or dynamic stable state. As Re increases from 20 to 120, spheroidal particles in the staggered pair gradually migrate toward the lower and upper walls, and the dimensionless average axial spacing between the adjacent prolate particles increases from 3.49 to 5.05 and collapses onto a single curve as a linear function of the particle Re. Compared to the oblate particle pair, the prolate particles are closer to the duct wall, and the corresponding axial spacing is larger at the same Re. For a staggered spheroidal particle pair, particles reach the equilibrium state under the attractive and repulsive forces. A second spheroidal particle prefers to occupy the eddy center generated by the first focusing particle. For the prolate particles with the tumbling mode, the distance between the particle and the eddy center gradually changes, and the axial spacing of the prolate particle pair also fluctuates periodically.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Inertial migration and self-assembly of staggered spheroidal particle pairs in square duct flows
In this paper, a staggered spheroidal particle pair inside a three-dimensional duct Poiseuille flow with Reynolds number (Re) up to 120 is investigated via the lattice Boltzmann method. Validation tests show excellent agreement with numerical and experimental results obtained by other groups. The entire migration dynamics and the final equilibrium state of the oblate and prolate particle pairs are analyzed and compared to those of the spherical particle pairs. The effects of initial axial spacing, particle aspect ratio, and Re are explored herein. Simulation results indicate that spheroidal particles tend to distribute orderly in the streamwise direction after they reach the corresponding face equilibrium positions. A key finding is that the prolate particle pairs eventually tumble with periodic oscillating axial spacing. Present results reveal that the initial axial spacing does not influence the equilibrium positions and interparticle spacings of spheroidal particle pairs. However, it does affect the migration process from the initial to the final stable or dynamic stable state. As Re increases from 20 to 120, spheroidal particles in the staggered pair gradually migrate toward the lower and upper walls, and the dimensionless average axial spacing between the adjacent prolate particles increases from 3.49 to 5.05 and collapses onto a single curve as a linear function of the particle Re. Compared to the oblate particle pair, the prolate particles are closer to the duct wall, and the corresponding axial spacing is larger at the same Re. For a staggered spheroidal particle pair, particles reach the equilibrium state under the attractive and repulsive forces. A second spheroidal particle prefers to occupy the eddy center generated by the first focusing particle. For the prolate particles with the tumbling mode, the distance between the particle and the eddy center gradually changes, and the axial spacing of the prolate particle pair also fluctuates periodically.
- 1 October 2025
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 57 (5) , 055507
Inertial migration of soft particle pairs: vortex-induced abrupt spacing changes in power-law fluids
We numerically investigate the inertial migration of two soft particles in power-law fluids. A notable finding is a distinct regime in which the axial equilibrium spacing between particle pairs increases linearly with the Reynolds number. Outside this linear region, the spacing undergoes a sharp escalation, and the Reynolds number interval supporting linear behavior widens as the power-law exponent rises. This sudden jump in spacing likely results from the formation of two vortices in the gap between particles, whose intensity grows with Reynolds number. Once the Reynolds number surpasses a critical threshold, these vortices occupy the entire interstitial volume, triggering a dramatic expansion of the axial equilibrium spacing. In shear-thinning fluids, increasing the blockage ratio yields a non-monotonic trend in axial spacing, which first increases and then decreases. Furthermore, higher capillary numbers or larger power-law exponents drive the particles toward the channel center, while an increase in Reynolds number initially pushes the particles outward before they migrate back inward. These results highlight vortex-induced transitions as the key mechanism governing spacing changes and provide new insights into soft-particle dynamics in confined power-law flows.
- 1 October 2025
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 57 (5) , 055507
Inertial migration of soft particle pairs: vortex-induced abrupt spacing changes in power-law fluids
We numerically investigate the inertial migration of two soft particles in power-law fluids. A notable finding is a distinct regime in which the axial equilibrium spacing between particle pairs increases linearly with the Reynolds number. Outside this linear region, the spacing undergoes a sharp escalation, and the Reynolds number interval supporting linear behavior widens as the power-law exponent rises. This sudden jump in spacing likely results from the formation of two vortices in the gap between particles, whose intensity grows with Reynolds number. Once the Reynolds number surpasses a critical threshold, these vortices occupy the entire interstitial volume, triggering a dramatic expansion of the axial equilibrium spacing. In shear-thinning fluids, increasing the blockage ratio yields a non-monotonic trend in axial spacing, which first increases and then decreases. Furthermore, higher capillary numbers or larger power-law exponents drive the particles toward the channel center, while an increase in Reynolds number initially pushes the particles outward before they migrate back inward. These results highlight vortex-induced transitions as the key mechanism governing spacing changes and provide new insights into soft-particle dynamics in confined power-law flows.
- 3 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A19
How can two circular self-propelled particles form a stable wedge-like conformation in channel flow?
We investigate the dynamics of circular self-propelled particles in channel flow, modelled as squirmers using a two-dimensional lattice Boltzmann method. The simulations explore a wide range of parameters, including channel Reynolds numbers ( $\textit{Re}_c$ ), squirmer Reynolds numbers ( $\textit{Re}_s$ ) and squirmer-type factors ( $\beta$ ). For a single squirmer, four motion regimes are identified: oscillatory motion confined to one side of the channel, oscillatory crossing of the channel centreline, stabilisation at a lateral equilibrium position with the squirmer tilted and stable upstream swimming near the channel centreline. For two squirmers, interactions produce not only these four corresponding regimes but also three additional ones: continuous collisions with repeated position exchanges, progressive separation and drifting apart and, most notably, the formation of a stable wedge-like conformation (regime D). A key finding is the emergence of regime D, which predominantly occurs for weak pullers ( $\beta = 1$ ) and at moderate to high $\textit{Re}_c$ values. Hydrodynamic interactions align the squirmers with streamline bifurcations near the channel centreline, enabling stability despite transient oscillations. Additionally, the channel blockage ratio critically affects the range of $\textit{Re}_s$ values over which this regime occurs, highlighting the influence of geometric confinement. This study extends the understanding of squirmer dynamics, revealing how hydrodynamic interactions drive collective behaviours. The findings also offer insights into the design of self-propelled particles for biomedical applications and contribute to the theoretical framework for active matter systems. Future work will investigate three-dimensional effects and the stability conditions for spherical squirmers forming stable wedge-like conformations, further generalising these results.- 3 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A19
How can two circular self-propelled particles form a stable wedge-like conformation in channel flow?
We investigate the dynamics of circular self-propelled particles in channel flow, modelled as squirmers using a two-dimensional lattice Boltzmann method. The simulations explore a wide range of parameters, including channel Reynolds numbers ( $\textit{Re}_c$ ), squirmer Reynolds numbers ( $\textit{Re}_s$ ) and squirmer-type factors ( $\beta$ ). For a single squirmer, four motion regimes are identified: oscillatory motion confined to one side of the channel, oscillatory crossing of the channel centreline, stabilisation at a lateral equilibrium position with the squirmer tilted and stable upstream swimming near the channel centreline. For two squirmers, interactions produce not only these four corresponding regimes but also three additional ones: continuous collisions with repeated position exchanges, progressive separation and drifting apart and, most notably, the formation of a stable wedge-like conformation (regime D). A key finding is the emergence of regime D, which predominantly occurs for weak pullers ( $\beta = 1$ ) and at moderate to high $\textit{Re}_c$ values. Hydrodynamic interactions align the squirmers with streamline bifurcations near the channel centreline, enabling stability despite transient oscillations. Additionally, the channel blockage ratio critically affects the range of $\textit{Re}_s$ values over which this regime occurs, highlighting the influence of geometric confinement. This study extends the understanding of squirmer dynamics, revealing how hydrodynamic interactions drive collective behaviours. The findings also offer insights into the design of self-propelled particles for biomedical applications and contribute to the theoretical framework for active matter systems. Future work will investigate three-dimensional effects and the stability conditions for spherical squirmers forming stable wedge-like conformations, further generalising these results.- 1 December 2024
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 56 (6) , 065506
Particle spacing and stability of initially staggered deformable particle trains migrating in a channel
We investigated the inertial migration of deformable particles in a two-dimensional channel flow. This study analyzes the effects of the channel Reynolds number (Re), channel blockage ratio (k), particle number (Np ) and reduced bending modulus (Eb ) on the formation of staggered particle trains. The results show that the stable normalized distance d p e q / H between two staggered particles is influenced by Re, k and Eb , where H is the channel width. As k increases or Eb decreases, d p e q / H decreases. The value of d p e q / H initially increases and then decreases with the increase of Re; when Eb is large and k is small, d p e q / H continuously increases with increasing Re. With the increase of Np , the closely arranged staggered particle trains evolve into five distinct migration Regimes. We explain the conditions for the formation of each Regime and explore the mechanisms of their interconversion. The findings of this study contribute to a better understanding of the self-organization process of deformable particles in channel flow.
- 1 December 2024
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 56 (6) , 065506
Particle spacing and stability of initially staggered deformable particle trains migrating in a channel
We investigated the inertial migration of deformable particles in a two-dimensional channel flow. This study analyzes the effects of the channel Reynolds number (Re), channel blockage ratio (k), particle number (Np ) and reduced bending modulus (Eb ) on the formation of staggered particle trains. The results show that the stable normalized distance d p e q / H between two staggered particles is influenced by Re, k and Eb , where H is the channel width. As k increases or Eb decreases, d p e q / H decreases. The value of d p e q / H initially increases and then decreases with the increase of Re; when Eb is large and k is small, d p e q / H continuously increases with increasing Re. With the increase of Np , the closely arranged staggered particle trains evolve into five distinct migration Regimes. We explain the conditions for the formation of each Regime and explore the mechanisms of their interconversion. The findings of this study contribute to a better understanding of the self-organization process of deformable particles in channel flow.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Self-ordering and organization of a staggered oblate particle pair in three-dimensional square ducts
We numerically investigate the formation and ordering of staggered oblate particle pairs in three-dimensional straight ducts with a square cross section. The lattice Boltzmann method is employed to simulate rigid particle pairs in a Newtonian liquid. The effects of initial axial spacing, Reynolds number, blockage ratio, and particle aspect ratio on the formation process, migration behavior, and interparticle spacing are explored in detail. Current results indicate that the process from initial to final steady state can be divided into two stages. The first stage is rapid migration from initial positions toward equilibrium positions under shear-induced lift force and wall-induced repulsive force. The second stage is the slow self-assembly of stable particle pairs in the axial direction due to the interparticle interaction. Interestingly, initial axial spacing significantly affects the formation process of particle pairs but does not affect the final steady state. It is found that the equilibrium positions of staggered particle pairs move slightly toward the duct walls, and the axial spacing increases with increasing Reynolds number or particle aspect ratio, or decreasing blockage ratio. For a staggered particle pair, the second particle will occupy the eddy center induced by the first focusing particle. Based on the existing data, a correlation is put forward to predict the axial interparticle spacing of staggered oblate particle pairs in duct flows. The present results may give insights into manipulating and comprehending non-spherical particle dynamics in microfluidic applications.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Self-ordering and organization of a staggered oblate particle pair in three-dimensional square ducts
We numerically investigate the formation and ordering of staggered oblate particle pairs in three-dimensional straight ducts with a square cross section. The lattice Boltzmann method is employed to simulate rigid particle pairs in a Newtonian liquid. The effects of initial axial spacing, Reynolds number, blockage ratio, and particle aspect ratio on the formation process, migration behavior, and interparticle spacing are explored in detail. Current results indicate that the process from initial to final steady state can be divided into two stages. The first stage is rapid migration from initial positions toward equilibrium positions under shear-induced lift force and wall-induced repulsive force. The second stage is the slow self-assembly of stable particle pairs in the axial direction due to the interparticle interaction. Interestingly, initial axial spacing significantly affects the formation process of particle pairs but does not affect the final steady state. It is found that the equilibrium positions of staggered particle pairs move slightly toward the duct walls, and the axial spacing increases with increasing Reynolds number or particle aspect ratio, or decreasing blockage ratio. For a staggered particle pair, the second particle will occupy the eddy center induced by the first focusing particle. Based on the existing data, a correlation is put forward to predict the axial interparticle spacing of staggered oblate particle pairs in duct flows. The present results may give insights into manipulating and comprehending non-spherical particle dynamics in microfluidic applications.
- Open Access
- 24 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (4)
The variation in wall shear stress induced by a linear train of soft particles in channel flow
We investigate the wall shear stress variation induced by soft particles modeled as capsules migrating in a channel. Interestingly, the wall shear stress exhibits a roughly linear increase in both its global maximum value and variation magnitude with an increase in the normalized overall lateral position of the capsules when they stabilize as a linear train. Furthermore, when a single capsule stabilizes in the channel centerline, the streamlines show an M-like shape in the upper part and a W-like shape in the lower part of the channel. Meanwhile, we use the vertical velocity to explain the typical peak-valley-peak structure in the wall shear stress profile. For multiple capsules, the contours of the vertical velocity can also be employed to determine the locations where the peaks or valleys in the wall shear stress occur. These findings enhance our comprehension of the variation in wall shear stress caused by soft particles.
- 24 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (4)
Open AccessThe variation in wall shear stress induced by a linear train of soft particles in channel flow
We investigate the wall shear stress variation induced by soft particles modeled as capsules migrating in a channel. Interestingly, the wall shear stress exhibits a roughly linear increase in both its global maximum value and variation magnitude with an increase in the normalized overall lateral position of the capsules when they stabilize as a linear train. Furthermore, when a single capsule stabilizes in the channel centerline, the streamlines show an M-like shape in the upper part and a W-like shape in the lower part of the channel. Meanwhile, we use the vertical velocity to explain the typical peak-valley-peak structure in the wall shear stress profile. For multiple capsules, the contours of the vertical velocity can also be employed to determine the locations where the peaks or valleys in the wall shear stress occur. These findings enhance our comprehension of the variation in wall shear stress caused by soft particles.
- 13 July 2023
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 55 (4) , 045501
Sedimentation of particles with various shapes and orientations in a closed channel using smoothed particle hydrodynamics
The sedimentation of particles with various shapes and orientations in a closed channel using smoothed particle hydrodynamics is investigated in this paper. The continuity and momentum equations of both fluid and solid are discretized using kernel approximation in the Lagrangian frame. The sedimentation behavior of different general shapes, including circle, pentagon, square, ellipse, rectangle, and triangle, at various initial orientations in the suspending fluid is simulated. The stable equilibrium orientation (SEO) of these shapes is examined, excluding the circle which serves as a validation case. Specifically, the major axis of the ellipse and rectangle tends to align horizontally, whereas the orientations of the pentagon and square seem to be random due to the lack of a major axis and the finite channel height. The settling behavior of the three types of triangles is also discussed, and the von Mises stress of these shapes during their settling is presented. This study offers valuable insights into fluid-particle interactions, specifically regarding the SEO and internal stress of settling particles with varying shapes and orientations.
- 13 July 2023
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 55 (4) , 045501
Sedimentation of particles with various shapes and orientations in a closed channel using smoothed particle hydrodynamics
The sedimentation of particles with various shapes and orientations in a closed channel using smoothed particle hydrodynamics is investigated in this paper. The continuity and momentum equations of both fluid and solid are discretized using kernel approximation in the Lagrangian frame. The sedimentation behavior of different general shapes, including circle, pentagon, square, ellipse, rectangle, and triangle, at various initial orientations in the suspending fluid is simulated. The stable equilibrium orientation (SEO) of these shapes is examined, excluding the circle which serves as a validation case. Specifically, the major axis of the ellipse and rectangle tends to align horizontally, whereas the orientations of the pentagon and square seem to be random due to the lack of a major axis and the finite channel height. The settling behavior of the three types of triangles is also discussed, and the von Mises stress of these shapes during their settling is presented. This study offers valuable insights into fluid-particle interactions, specifically regarding the SEO and internal stress of settling particles with varying shapes and orientations.
- 1 October 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (10) , 103308
Inertial migration of soft particles initially evenly spaced along the flow direction in a channel
The inertial migration of two-dimensional soft particles initially distributed uniformly in channel flow is numerically studied by employing an immersed-boundary lattice Boltzmann method coupled with a finite element method. To model a soft particle, a capsule with an elastic membrane separating the liquid inside from the outside is used. Validation tests show excellent agreement with previous numerical results of other researchers. Then, the effects of the number of capsules Np, the bending stiffness Eb, the initial position , and the Reynolds number Re on the dynamics of the capsules in channel flow are investigated in detail. Interestingly, we discover a new regime (labeled as regime E) in which a few capsules situated near the channel centerline travel much faster than the rest. Moreover, regime E is more prone to vanishing while the capsules are very soft. The normalized overall lateral position of the capsules σ increases almost linearly with Np when the capsules stabilize in a single-line particle train (designated as regime A). We also make an effort to explain the formation of the capsule deformation shape in regime A. The steady dynamics of a single capsule depend on whether the initial position is on the channel centerline. However, if the capsule is not released on the channel centerline, the steady capsule dynamics are independent of the initial position. But, it is not true for multiple capsule dynamics. These findings may help understand the inertial migration of capsules in channel flow.- 1 October 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (10) , 103308
Inertial migration of soft particles initially evenly spaced along the flow direction in a channel
The inertial migration of two-dimensional soft particles initially distributed uniformly in channel flow is numerically studied by employing an immersed-boundary lattice Boltzmann method coupled with a finite element method. To model a soft particle, a capsule with an elastic membrane separating the liquid inside from the outside is used. Validation tests show excellent agreement with previous numerical results of other researchers. Then, the effects of the number of capsules Np, the bending stiffness Eb, the initial position , and the Reynolds number Re on the dynamics of the capsules in channel flow are investigated in detail. Interestingly, we discover a new regime (labeled as regime E) in which a few capsules situated near the channel centerline travel much faster than the rest. Moreover, regime E is more prone to vanishing while the capsules are very soft. The normalized overall lateral position of the capsules σ increases almost linearly with Np when the capsules stabilize in a single-line particle train (designated as regime A). We also make an effort to explain the formation of the capsule deformation shape in regime A. The steady dynamics of a single capsule depend on whether the initial position is on the channel centerline. However, if the capsule is not released on the channel centerline, the steady capsule dynamics are independent of the initial position. But, it is not true for multiple capsule dynamics. These findings may help understand the inertial migration of capsules in channel flow.