Mohd Farriz Basar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mohd Farriz Basar has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Nurul Ashikin Mohd Rais
Faculty of Electrical and Electronic Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
4 shared publications - Wan Azani Mustafa
University of Malaysia Perlis, UniCITI Alam Campus
3 shared publications - Izzatie Akmal Zulkarnain
Fakulti Teknologi dan Kejuruteraan Elektrik (FTKE), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya , 76100 Durian Tunggal , Melaka , Malaysia
2 shared publications - Kamaruzzaman Sopian
Department of Mechanical Engineering Universiti Teknologi PETRONAS Seri Iskandar Malaysia
2 shared publications - Auzani Jidin
Universiti Teknikal Malaysia Melaka
1 shared publication - Azhan Ab. Rahman
Fakulti Teknologi dan Kejuruteraan Elektrik, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, Malaysia
1 shared publication
Latest Publications
- Open Access
- 17 May 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 117 (1) , 132-142
Reliability Study of Ultra Z-Blade Water Turbine for Pico-Hydro System with Low Head and Low Flow Water Resources
The term "pico-hydro" refers to hydropower that has an output of no more than 5 kW. This method has an advantage over large-scale hydropower systems in that it can extract electrical energy sources from even a small stream of water. It is interesting to note that there is not yet a hydro reaction type water turbine that has been developed commercially and is suitable for usage in low-head and low-flow places. In this work, an Ultra Z-Blade reaction type turbine is used to introduce a pico-hydro system, and the critical design parameters are demonstrated through an exploratory method (U-ZBT). For both ideal and real-world scenarios, numerical simulations and their solutions are described here. The development of the equations uses the ideas of mass, momentum, and energy conservation. The output power (W), rotor angular speed (ω), turbine radius (R), and torque (T) can all be specified. An instrumentation diagram that was utilized during the testing of the U-ZBT prototype is included in the documentation to help explain the experimental techniques. Both the mathematical model and the experimental findings have shown that the U-ZBT has a higher level of performance at operational water heads as low as 5m and ultra-low mass flow rates as low as 1.77 L/sec. In addition to this, it can achieve rotational speeds of up to 130 rpm, has a high efficiency of 66 %, and is capable of producing high mechanical power of roughly 60 watts.
- 17 May 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 117 (1) , 132-142
Open AccessReliability Study of Ultra Z-Blade Water Turbine for Pico-Hydro System with Low Head and Low Flow Water Resources
The term "pico-hydro" refers to hydropower that has an output of no more than 5 kW. This method has an advantage over large-scale hydropower systems in that it can extract electrical energy sources from even a small stream of water. It is interesting to note that there is not yet a hydro reaction type water turbine that has been developed commercially and is suitable for usage in low-head and low-flow places. In this work, an Ultra Z-Blade reaction type turbine is used to introduce a pico-hydro system, and the critical design parameters are demonstrated through an exploratory method (U-ZBT). For both ideal and real-world scenarios, numerical simulations and their solutions are described here. The development of the equations uses the ideas of mass, momentum, and energy conservation. The output power (W), rotor angular speed (ω), turbine radius (R), and torque (T) can all be specified. An instrumentation diagram that was utilized during the testing of the U-ZBT prototype is included in the documentation to help explain the experimental techniques. Both the mathematical model and the experimental findings have shown that the U-ZBT has a higher level of performance at operational water heads as low as 5m and ultra-low mass flow rates as low as 1.77 L/sec. In addition to this, it can achieve rotational speeds of up to 130 rpm, has a high efficiency of 66 %, and is capable of producing high mechanical power of roughly 60 watts.
- Open Access
- 1 January 2024
- Published by Walter de Gruyter GmbH in Energy Harvesting and Systems
- Vol. 11 (1)
Investigations on the performance of bottle blade overshot water wheel in very low head resources for pico hydropower
An overshot water wheel is considered as a low-cost and simple alternative for rural electrification. Hence, the aim of this study is to develop a noncomplex geometrical design of an overshot water wheel, namely, bottle blade overshot water wheel (BOWW), yet effectively operated for pico hydropower generation. The BOWW and hydro system were assessed at very low water head conditions, namely, 0.3, 0.4, and 0.5 m water head using a water test rig. According to the experimental results, the BOWW equipped with eight blades when operated at 0.5 m head produced significant mechanical power and electrical power up to 48.58 and 15.55 W. Analytically, the turbine with eight blades has 26.8–49.1% efficiency. Meanwhile, the effectiveness of four blades is between 5.66 and 28.96%. The results showed that eight blades performed well. Finally, it proves that, with a very low water head and low flow rate, the proposed system can perform and produce a significant power output for power generation.
- 1 January 2024
- Published by Walter de Gruyter GmbH in Energy Harvesting and Systems
- Vol. 11 (1)
Open AccessInvestigations on the performance of bottle blade overshot water wheel in very low head resources for pico hydropower
An overshot water wheel is considered as a low-cost and simple alternative for rural electrification. Hence, the aim of this study is to develop a noncomplex geometrical design of an overshot water wheel, namely, bottle blade overshot water wheel (BOWW), yet effectively operated for pico hydropower generation. The BOWW and hydro system were assessed at very low water head conditions, namely, 0.3, 0.4, and 0.5 m water head using a water test rig. According to the experimental results, the BOWW equipped with eight blades when operated at 0.5 m head produced significant mechanical power and electrical power up to 48.58 and 15.55 W. Analytically, the turbine with eight blades has 26.8–49.1% efficiency. Meanwhile, the effectiveness of four blades is between 5.66 and 28.96%. The results showed that eight blades performed well. Finally, it proves that, with a very low water head and low flow rate, the proposed system can perform and produce a significant power output for power generation.
- Open Access
- 18 January 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (2) , 9-19
Techno-Economic Evaluations: An Innovative of Hydraulic Reaction Turbine for Pico-Hydro Generation System
The primary goal of this paper is to evaluate an innovative Z-Blade turbine technology and its potential implications for production costs and manufacturing techniques. From literatures, conventional pico-hydro technologies with a capability of less than 5kW are getting more and more attention as good alternatives to environmentally friendly power generation, but there are more expensive and complex for small power generation and small domestic consumer level. Therefore, a Z-Blade reaction turbine technical and environmental processes as well as financial research are described in-depth. The methods for a Z-blade turbine design and implementation are described here, and also the material using for the Z-Blade turbine is a grey PVC pipe. Moreover, empirical description, designation, costing, and correlation are employed in the process of critically analysing the simple reaction water turbine novels. Also in this article, the manufacture of the Split Reaction Turbine (SRT) and Cross Pipe Turbine (CPT) was re-evaluated to take into consideration the technological and economic factors as well as the difficulties of both turbines. In the meantime, low-head, low-flow water resources used to examine additional features of Z-Blade. Theoretically, such a platform for hydro production is cost - effective and has a simplistic design methodology with a total cost of USD76 that equates to 7.6% of the overall installation cost and worthy of output up to 115W of mechanical energy.
- 18 January 2022
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (2) , 9-19
Open AccessTechno-Economic Evaluations: An Innovative of Hydraulic Reaction Turbine for Pico-Hydro Generation System
The primary goal of this paper is to evaluate an innovative Z-Blade turbine technology and its potential implications for production costs and manufacturing techniques. From literatures, conventional pico-hydro technologies with a capability of less than 5kW are getting more and more attention as good alternatives to environmentally friendly power generation, but there are more expensive and complex for small power generation and small domestic consumer level. Therefore, a Z-Blade reaction turbine technical and environmental processes as well as financial research are described in-depth. The methods for a Z-blade turbine design and implementation are described here, and also the material using for the Z-Blade turbine is a grey PVC pipe. Moreover, empirical description, designation, costing, and correlation are employed in the process of critically analysing the simple reaction water turbine novels. Also in this article, the manufacture of the Split Reaction Turbine (SRT) and Cross Pipe Turbine (CPT) was re-evaluated to take into consideration the technological and economic factors as well as the difficulties of both turbines. In the meantime, low-head, low-flow water resources used to examine additional features of Z-Blade. Theoretically, such a platform for hydro production is cost - effective and has a simplistic design methodology with a total cost of USD76 that equates to 7.6% of the overall installation cost and worthy of output up to 115W of mechanical energy.
- Open Access
- 25 December 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (1) , 23-39
Optimization of Reaction Typed Water Turbine in Very Low Head Water Resources for Pico Hydro
The purpose of this research is to investigate the dominant parameters that influence the optimum performance of reaction typed turbine at very low water head. The concepts of conservation of mass, momentum and energy are utilised to explore performance characteristics using a graphical technique. Parametric analysis of the governing equation and experimental results were performed to show that the turbine diameter and nozzle exit area has a dynamic response to mass flow rate, angular speed, output power and efficiency. Depending on the nozzle diameter of (0.01 m, 0.006 m, and 0.008 m) and turbine pipe size with (diameter of 0.025 m and 0.015 m), six versions of prototype turbine Z-blade turbine were produced. All the turbines have been tested at 100 kPa static water pressures and below. According to a variety of experimental data for all types of turbines, the turbine diameter and nozzle exit area have a substantial impact on turbine performance, especially at high water heads. Despite differences in turbine length and nozzle exit area, more than 90 % of the pattern curves for rotational speed, water flow rate, and mechanical power were identical. Overall, the Z-blade turbine Type B outperforms, resulting in higher turbine efficiency at low head and low flow water condition.
- 25 December 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 90 (1) , 23-39
Open AccessOptimization of Reaction Typed Water Turbine in Very Low Head Water Resources for Pico Hydro
The purpose of this research is to investigate the dominant parameters that influence the optimum performance of reaction typed turbine at very low water head. The concepts of conservation of mass, momentum and energy are utilised to explore performance characteristics using a graphical technique. Parametric analysis of the governing equation and experimental results were performed to show that the turbine diameter and nozzle exit area has a dynamic response to mass flow rate, angular speed, output power and efficiency. Depending on the nozzle diameter of (0.01 m, 0.006 m, and 0.008 m) and turbine pipe size with (diameter of 0.025 m and 0.015 m), six versions of prototype turbine Z-blade turbine were produced. All the turbines have been tested at 100 kPa static water pressures and below. According to a variety of experimental data for all types of turbines, the turbine diameter and nozzle exit area have a substantial impact on turbine performance, especially at high water heads. Despite differences in turbine length and nozzle exit area, more than 90 % of the pattern curves for rotational speed, water flow rate, and mechanical power were identical. Overall, the Z-blade turbine Type B outperforms, resulting in higher turbine efficiency at low head and low flow water condition.
- Open Access
- 5 August 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 85 (2) , 51-65
Performance Analysis of Z-Blade Reaction Type Turbine for Low-Head Low Flowrate Pico Hydro
The study explores the performance characteristics of a Z-Blade reaction type water turbine and investigates a test unit for an ideal and practical case using the governing equations derived from the principles of conservation of mass, momentum, and energy. Various analyses are conducted with consideration of the ideal and possible operating condition for low-head (3 m to 5 m) and low-flow (2.5 L/sec and below) water resources. The relationship of the fluid flow friction known as k-factor with mass flow rate and angular velocity for a Z-Blade turbine model is discussed. The measured performance of two PVC pipe sizes (0.5 inch and 1 inch) of a Z-Blade turbine is presented and evaluated against theoretical results. This work also describes the simple concept of a Z-Blade turbine for a pico-hydro application. A large variation in k-factor with a 1% difference in rotational speed and mass flow rate is presented. The coefficient k-factor is also demonstrated as a strong parameter influencing the mass flow rate and rotational speed performance. This coefficient also has a significant impact on the conversion of potential energy into power output.
- 5 August 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 85 (2) , 51-65
Open AccessPerformance Analysis of Z-Blade Reaction Type Turbine for Low-Head Low Flowrate Pico Hydro
The study explores the performance characteristics of a Z-Blade reaction type water turbine and investigates a test unit for an ideal and practical case using the governing equations derived from the principles of conservation of mass, momentum, and energy. Various analyses are conducted with consideration of the ideal and possible operating condition for low-head (3 m to 5 m) and low-flow (2.5 L/sec and below) water resources. The relationship of the fluid flow friction known as k-factor with mass flow rate and angular velocity for a Z-Blade turbine model is discussed. The measured performance of two PVC pipe sizes (0.5 inch and 1 inch) of a Z-Blade turbine is presented and evaluated against theoretical results. This work also describes the simple concept of a Z-Blade turbine for a pico-hydro application. A large variation in k-factor with a 1% difference in rotational speed and mass flow rate is presented. The coefficient k-factor is also demonstrated as a strong parameter influencing the mass flow rate and rotational speed performance. This coefficient also has a significant impact on the conversion of potential energy into power output.
- 1 January 2021
- Published by Walter de Gruyter GmbH in Energy Harvesting and Systems
- Vol. 8 (1) , 29-35
Investigation on rotor jet interference in a hydraulic reaction turbine for low head low flow water conditions
The focus of this paper is to investigate the issue of water jet interference, which is a common flaw in simple reaction turbines. When the turbine’s wall crosses the water jet coming from another nozzle, this is known as jet interference. The governing equations are also used to analyse the Z-Blade simple water reaction turbine for an ideal and practical example, based on the principles of mass-, impulses and energy conservation. Various evaluations of real and potential operating losses for low-head (3–5 m) and low-flow (3 L/s and below) water resources have been conducted. According to experimental data, the Z-Blade turbine Type B achieves the maximum rotational speeds at 450 rpm, followed by Type A at 400 rpm and Type C at 300 rpm. By performing parametric analysis via governing equations, the calculated non-interference speed is approximately twice that of the turbine’s maximum speed. Furthermore, as the turbine reaches its maximum rotational speed at the optimal length diameter, the turbine speed decreases without interference from the jet nozzle rotor. This resembles a phenomenon of non-interference rotor jet on Z-Blade turbine.
- 1 January 2021
- Published by Walter de Gruyter GmbH in Energy Harvesting and Systems
- Vol. 8 (1) , 29-35
Investigation on rotor jet interference in a hydraulic reaction turbine for low head low flow water conditions
The focus of this paper is to investigate the issue of water jet interference, which is a common flaw in simple reaction turbines. When the turbine’s wall crosses the water jet coming from another nozzle, this is known as jet interference. The governing equations are also used to analyse the Z-Blade simple water reaction turbine for an ideal and practical example, based on the principles of mass-, impulses and energy conservation. Various evaluations of real and potential operating losses for low-head (3–5 m) and low-flow (3 L/s and below) water resources have been conducted. According to experimental data, the Z-Blade turbine Type B achieves the maximum rotational speeds at 450 rpm, followed by Type A at 400 rpm and Type C at 300 rpm. By performing parametric analysis via governing equations, the calculated non-interference speed is approximately twice that of the turbine’s maximum speed. Furthermore, as the turbine reaches its maximum rotational speed at the optimal length diameter, the turbine speed decreases without interference from the jet nozzle rotor. This resembles a phenomenon of non-interference rotor jet on Z-Blade turbine.
- 1 January 2010
- Published by IACSIT Press in International Journal of Computer and Electrical Engineering
- p. 148-157
Simple Realization of 5-Segment Discontinuous SVPWM Based on FPGA
- 1 January 2010
- Published by IACSIT Press in International Journal of Computer and Electrical Engineering
- p. 148-157
Simple Realization of 5-Segment Discontinuous SVPWM Based on FPGA