Ian Schumann Marques Martins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ian Schumann Marques Martins has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Fernando Artur Brasil Danziger
Universidade Federal do Rio de Janeiro
3 shared publications - Vitor Nascimento Aguiar
Universidade Federal do Rio de Janeiro
3 shared publications - Graziella Maria Faquim Jannuzzi
Postgraduate Program, Civil Engineering, Federal University of Rio de Janeiro (COOPE), Rio de Janeiro 21941914, RJ, Brazil
2 shared publications - Maurício Do Espírito Santo Andrade
Universidade Federal do Rio de Janeiro
2 shared publications - Paulo Eduardo Lima de Santa Maria
SM Engenheiros Consultores, Brasil
2 shared publications A. Thomé
1 shared publication
Latest Publications
- 2 July 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
On the term cohesion and its several meanings in geotechnics
Cohesion was defined by Coulomb in the eighteenth century as the strength of a prismatic solid body subjected to a direct tensile test. However, in geotechnics, different meanings have been ascribed to the term cohesion causing conceptual confusion. To distinguish the several meanings assigned to the term cohesion, it is common to find it followed by a complementary term to indicate its meaning. Examples include true cohesion, apparent cohesion, cohesion intercept and Hvorslev’s true cohesion. Each of these terms is defined, distinguishing them by their physical interpretation. For this, it was necessary to visit some historical articles from the eighteenth and nineteenth centuries, as well as some articles from the 1930s and 1940s. In addition to the historical aspects presented, the interpretation of rock weathering as a loss of Coulomb’s cohesion and the interpretation of “Hvorslev’s true cohesion” as being of a viscous nature are discussed.
- 2 July 2026
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (3)
On the term cohesion and its several meanings in geotechnics
Cohesion was defined by Coulomb in the eighteenth century as the strength of a prismatic solid body subjected to a direct tensile test. However, in geotechnics, different meanings have been ascribed to the term cohesion causing conceptual confusion. To distinguish the several meanings assigned to the term cohesion, it is common to find it followed by a complementary term to indicate its meaning. Examples include true cohesion, apparent cohesion, cohesion intercept and Hvorslev’s true cohesion. Each of these terms is defined, distinguishing them by their physical interpretation. For this, it was necessary to visit some historical articles from the eighteenth and nineteenth centuries, as well as some articles from the 1930s and 1940s. In addition to the historical aspects presented, the interpretation of rock weathering as a loss of Coulomb’s cohesion and the interpretation of “Hvorslev’s true cohesion” as being of a viscous nature are discussed.
- 30 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- p. 1-10
Settlement behaviour of a fill on soft clay assessed by field and laboratory tests
A methodology is presented for evaluating past and future settlements of an area where fill was placed over soft clay some time before the site development – a situation frequently encountered in engineering practice. The proposed approach integrates field and laboratory tests to assess the consolidation stage and estimate settlement development over time. The case study addresses a fill constructed to raise the grade of an area of the campus of the Federal University of Rio de Janeiro, Brazil, which was subsequently developed as a Technological Park. The company leasing the land for a 50-year period required an assessment of the magnitude and rate of settlements expected during the lease term. The testing programme was designed to be cost- and time-effective while still providing results with reasonable accuracy. The consolidation stage was evaluated using in situ pore-pressure measurements obtained with a small-diameter piezometric probe, while the clay consolidation properties were determined from laboratory tests. Established consolidation theories were used to estimate settlement development over time, considering both primary and secondary consolidation.
- 30 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- p. 1-10
Settlement behaviour of a fill on soft clay assessed by field and laboratory tests
A methodology is presented for evaluating past and future settlements of an area where fill was placed over soft clay some time before the site development – a situation frequently encountered in engineering practice. The proposed approach integrates field and laboratory tests to assess the consolidation stage and estimate settlement development over time. The case study addresses a fill constructed to raise the grade of an area of the campus of the Federal University of Rio de Janeiro, Brazil, which was subsequently developed as a Technological Park. The company leasing the land for a 50-year period required an assessment of the magnitude and rate of settlements expected during the lease term. The testing programme was designed to be cost- and time-effective while still providing results with reasonable accuracy. The consolidation stage was evaluated using in situ pore-pressure measurements obtained with a small-diameter piezometric probe, while the clay consolidation properties were determined from laboratory tests. Established consolidation theories were used to estimate settlement development over time, considering both primary and secondary consolidation.
- Open Access
- 24 November 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (1)
On the existence of a viscous component in the effective stress in clays
This work explains secondary consolidation and undrained stress relaxation under isotropic (hydrostatic) stress states in saturated plastic soils, using an extended concept of effective stress. Effective stress (σ’) is split into two components: one transmitted by the solid contacts between grains (σ’s), called the solid component, and another transmitted by the highly viscous adsorbed water surrounding the grains (σ’η), called the viscous component. Isotropic secondary consolidation is explained as taking place by the transference of the viscous component to the solid component under constant effective stress, suggesting that volume changes are associated to changes in the solid component and not to changes in effective stress as a whole. Isotropic consolidation tests in which drainage was closed after the “end of primary”, starting an undrained isotropic stress relaxation stage, showed pore pressure increase with time under constant total stress, causing the effective stress to decrease with time, with no water content change. In the light of the extended concept of effective stress, such pore pressure build-up can be shown to be a consequence of the transference of the viscous component to pore pressure. A practical application of this approach is the prediction of the final value of volumetric strain caused by secondary consolidation. A model based on such an extended concept of effective stress is being developed for general stress states, being able to explain time and strain rate phenomena observed in plastic soil behavior, such as creep, shear stress relaxation and strain rate-dependent strength.
- 24 November 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 49 (1)
Open AccessOn the existence of a viscous component in the effective stress in clays
This work explains secondary consolidation and undrained stress relaxation under isotropic (hydrostatic) stress states in saturated plastic soils, using an extended concept of effective stress. Effective stress (σ’) is split into two components: one transmitted by the solid contacts between grains (σ’s), called the solid component, and another transmitted by the highly viscous adsorbed water surrounding the grains (σ’η), called the viscous component. Isotropic secondary consolidation is explained as taking place by the transference of the viscous component to the solid component under constant effective stress, suggesting that volume changes are associated to changes in the solid component and not to changes in effective stress as a whole. Isotropic consolidation tests in which drainage was closed after the “end of primary”, starting an undrained isotropic stress relaxation stage, showed pore pressure increase with time under constant total stress, causing the effective stress to decrease with time, with no water content change. In the light of the extended concept of effective stress, such pore pressure build-up can be shown to be a consequence of the transference of the viscous component to pore pressure. A practical application of this approach is the prediction of the final value of volumetric strain caused by secondary consolidation. A model based on such an extended concept of effective stress is being developed for general stress states, being able to explain time and strain rate phenomena observed in plastic soil behavior, such as creep, shear stress relaxation and strain rate-dependent strength.
- Open Access
- 3 January 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (1)
Radial consolidation considering Newtonian and non- Newtonian viscous components of the effective stress
Research on the viscous behavior of soft soils suggested that the effective stress should be divided into two components. One is related to the solid contacts between the grains, and its variation would be the true cause of deformations and distortions. The other is related to the viscous contacts of the water adsorbed to the grains, which would not cause deformations or distortions, and would be a function of the strain rate. This model is able to explain some phenomena, such as secondary consolidation and the increase in pore pressure after drainage closure. However, a consolidation theory adopting a linear relationship between the viscous component and the strain rate (Newtonian behavior) could not reproduce the secondary consolidation as seen in consolidation tests. In this paper, three theories of radial flow consolidation were developed and solved analytically. In two of them the linear relationship was adopted, while in the third one a non-linear relationship was proposed (non-Newtonian behavior). The solutions showed that the linear relationship is in fact not able to reproduce secondary consolidation, but the non-linear relationship provided much better results and can be a promising tool for future studies.
- 3 January 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (1)
Open AccessRadial consolidation considering Newtonian and non- Newtonian viscous components of the effective stress
Research on the viscous behavior of soft soils suggested that the effective stress should be divided into two components. One is related to the solid contacts between the grains, and its variation would be the true cause of deformations and distortions. The other is related to the viscous contacts of the water adsorbed to the grains, which would not cause deformations or distortions, and would be a function of the strain rate. This model is able to explain some phenomena, such as secondary consolidation and the increase in pore pressure after drainage closure. However, a consolidation theory adopting a linear relationship between the viscous component and the strain rate (Newtonian behavior) could not reproduce the secondary consolidation as seen in consolidation tests. In this paper, three theories of radial flow consolidation were developed and solved analytically. In two of them the linear relationship was adopted, while in the third one a non-linear relationship was proposed (non-Newtonian behavior). The solutions showed that the linear relationship is in fact not able to reproduce secondary consolidation, but the non-linear relationship provided much better results and can be a promising tool for future studies.
- Open Access
- 29 September 2023
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 46 (3)
The 8th Victor de Mello lecture: role played by viscosity on the undrained behaviour of normally consolidated clays
Phenomena that do not obey Terzaghi’s principle of effective stress (PES) are related to strain rate and time effects. This issue led the author to refer to early articles in soil mechanics, which used to consider the shear resistance of clays as a combination of two components: a frictional and a viscous one. In these articles the viscous component was assigned to the distortion of highly viscous adsorbed water layer in the contact points between grains along the plane where shearing takes place. Assuming the shear resistance of plastic soils comprises frictional and viscous resistance components, a shear stress equation can be added to the PES. It is shown that Mohr’s circle of effective stress is the sum of two ellipses: the viscosity and the friction ellipses. The ordinates of the viscosity and the friction ellipses represent the viscous and the frictional components of shear resistance in different planes, respectively. This approach leads to a failure criterion considering strain rate, according to which failure takes place whenever the friction ellipse touches the strength envelope, which is the 'e φ sloped straight line passing through the origin, 'e φ being the Hvorslev’s true angle of friction. By adding such shear stress equation to the PES, a model that explains strain rate and time effects is developed. Predictions of the proposed model are compared to results from tests carried out on San Francisco Bay Mud specimens.
- 29 September 2023
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 46 (3)
Open AccessThe 8th Victor de Mello lecture: role played by viscosity on the undrained behaviour of normally consolidated clays
Phenomena that do not obey Terzaghi’s principle of effective stress (PES) are related to strain rate and time effects. This issue led the author to refer to early articles in soil mechanics, which used to consider the shear resistance of clays as a combination of two components: a frictional and a viscous one. In these articles the viscous component was assigned to the distortion of highly viscous adsorbed water layer in the contact points between grains along the plane where shearing takes place. Assuming the shear resistance of plastic soils comprises frictional and viscous resistance components, a shear stress equation can be added to the PES. It is shown that Mohr’s circle of effective stress is the sum of two ellipses: the viscosity and the friction ellipses. The ordinates of the viscosity and the friction ellipses represent the viscous and the frictional components of shear resistance in different planes, respectively. This approach leads to a failure criterion considering strain rate, according to which failure takes place whenever the friction ellipse touches the strength envelope, which is the 'e φ sloped straight line passing through the origin, 'e φ being the Hvorslev’s true angle of friction. By adding such shear stress equation to the PES, a model that explains strain rate and time effects is developed. Predictions of the proposed model are compared to results from tests carried out on San Francisco Bay Mud specimens.
- 1 October 2021
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 44 (4) , 1-18
Compressibility and consolidation properties of Santos soft clay near Barnabe Island
- 1 October 2021
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 44 (4) , 1-18
Compressibility and consolidation properties of Santos soft clay near Barnabe Island
- Open Access
- 30 July 2021
- Published by Coimbra University Press in Geotecnia
- No. 152,p. 405-434
Velocidade de carregamento na estimativa de parâmetros geotécnicos
A influência da velocidade de carregamento no comportamento de geo-materiais e, por decorrência, na estimativa de seus parâmetros constitutivos se constitui em um dos desafios da engenharia geotécnica. Durante eventos dinâmicos ou carregamentos rápidos, como terremotos, o solo exibe comportamento distinto daquele observado ao longo da vida útil da estrutura, gerando poro pressões elevadas e tensões cisalhantes mobilizadas pela parcela de escoamento viscoso. No outro lado do espectro, baixas taxas de deformações produzem drenagem parcial durante o cisalhamento e, nestes casos, a resistência mobilizada não corresponde a comportamento não-drenado. Este artigo discute o comportamento de solos quando submetidos a uma ampla gama de taxas de deformação, discutindo efeito das condições de drenagem necessárias para a transição entre uma resposta drenada a velocidades de deformação baixas, para uma resposta não-drenada ou viscosa especialmente em ensaios realizados a altas taxas de deformação. O artigo reúne pesquisas desenvolvidas no Brasil e em Portugal, enfatizando suas contribuições à prática de projetos geotécnicos.
- 30 July 2021
- Published by Coimbra University Press in Geotecnia
- No. 152,p. 405-434
Open AccessVelocidade de carregamento na estimativa de parâmetros geotécnicos
A influência da velocidade de carregamento no comportamento de geo-materiais e, por decorrência, na estimativa de seus parâmetros constitutivos se constitui em um dos desafios da engenharia geotécnica. Durante eventos dinâmicos ou carregamentos rápidos, como terremotos, o solo exibe comportamento distinto daquele observado ao longo da vida útil da estrutura, gerando poro pressões elevadas e tensões cisalhantes mobilizadas pela parcela de escoamento viscoso. No outro lado do espectro, baixas taxas de deformações produzem drenagem parcial durante o cisalhamento e, nestes casos, a resistência mobilizada não corresponde a comportamento não-drenado. Este artigo discute o comportamento de solos quando submetidos a uma ampla gama de taxas de deformação, discutindo efeito das condições de drenagem necessárias para a transição entre uma resposta drenada a velocidades de deformação baixas, para uma resposta não-drenada ou viscosa especialmente em ensaios realizados a altas taxas de deformação. O artigo reúne pesquisas desenvolvidas no Brasil e em Portugal, enfatizando suas contribuições à prática de projetos geotécnicos.
- 1 September 2013
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 36 (3) , 265-274
Surprising Soil Behaviour in Soil Sampling
Thick wall (6.6 mm wall thickness) plastic samplers, 97.2 mm in internal diameter (area ratio of 29%), 700 mm in length (length of soil sample 640 mm), with a cutting edge angle of 23°, without clearance and with a sampler head have been used to collect very soft clay samples at Sarapuí II test site. Very good to excellent and good to fair quality samples have been surprisingly obtained in most cases, which were attributed to a combination of five factors: the absence of an inside clearance, the low friction of the plastic sampler, the small “trick” to close the top of the sampling rods assuring that suction would be imposed on the top of the sample, the very careful handling and trimming process, combined with no extrusion of the sample, and the small ratio between specimen diameter and sample diameter. It is still too early to propose the use of thick wall plastic samplers - in combination with the procedures outlined above - to be used in regular undisturbed soft clay sampling, and more research is needed to identify the role of each procedure in the final result. However, if confirmed, the procedures adopted will allow significant cost saving with respect to the use of thin wall brass (or stainless steel) samplers.
- 1 September 2013
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 36 (3) , 265-274
Surprising Soil Behaviour in Soil Sampling
Thick wall (6.6 mm wall thickness) plastic samplers, 97.2 mm in internal diameter (area ratio of 29%), 700 mm in length (length of soil sample 640 mm), with a cutting edge angle of 23°, without clearance and with a sampler head have been used to collect very soft clay samples at Sarapuí II test site. Very good to excellent and good to fair quality samples have been surprisingly obtained in most cases, which were attributed to a combination of five factors: the absence of an inside clearance, the low friction of the plastic sampler, the small “trick” to close the top of the sampling rods assuring that suction would be imposed on the top of the sample, the very careful handling and trimming process, combined with no extrusion of the sample, and the small ratio between specimen diameter and sample diameter. It is still too early to propose the use of thick wall plastic samplers - in combination with the procedures outlined above - to be used in regular undisturbed soft clay sampling, and more research is needed to identify the role of each procedure in the final result. However, if confirmed, the procedures adopted will allow significant cost saving with respect to the use of thin wall brass (or stainless steel) samplers.
- 1 September 2012
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 35 (3) , 279-294
Cyclic T-Bar Tests to Evaluate the Remoulded Undrained Shear Strength of the Sarapuí II Soft Clay
The undrained remoulded shear strength of a clay, sur, is an important parameter in the design of a number of geotechnical applications. In the case of onshore tests the value ofsur is generally obtained from vane tests. Recently, cyclic T-bar tests have been used to obtain the sur value, especially for offshore applications. Seventeen T-bar cyclic tests in two deployments have been performed at Sarapuí II soft clay test site. In a third deployment only penetration was recorded. The presence of roots has influenced the values of the initial penetration in one of the deployments, as observed in another test site, which is a consequence of the shape of the penetrometer and may be considered a shortcoming of the test. Therefore, to know whether roots have influenced the test results in a site at least two repeatable tests must be performed. If cyclic tests are performed, their results can provide a good indication of the influence of the roots. Considering the vane shear test as reference for obtaining su and sur, NT-bar obtained from tests not affected by the roots ranged from 8.8 to 10.9, with an average of 9.8, while Nrem, T-bar ranged from 14.1 to 19.5, with an average of 16.3. Therefore NT-bar values (related to the natural condition) were smaller than Nrem, T-bar (related to the remoulded condition). The equations suggested by Yafrate et al. (2009) to evaluate the remoulded penetration resistance, the whole degradation curve and the sensitivity, based only on the initial penetration and extraction resistances have provided good results for the Sarapuí II soft clay, except in the case of very shallow depths.
- 1 September 2012
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 35 (3) , 279-294
Cyclic T-Bar Tests to Evaluate the Remoulded Undrained Shear Strength of the Sarapuí II Soft Clay
The undrained remoulded shear strength of a clay, sur, is an important parameter in the design of a number of geotechnical applications. In the case of onshore tests the value ofsur is generally obtained from vane tests. Recently, cyclic T-bar tests have been used to obtain the sur value, especially for offshore applications. Seventeen T-bar cyclic tests in two deployments have been performed at Sarapuí II soft clay test site. In a third deployment only penetration was recorded. The presence of roots has influenced the values of the initial penetration in one of the deployments, as observed in another test site, which is a consequence of the shape of the penetrometer and may be considered a shortcoming of the test. Therefore, to know whether roots have influenced the test results in a site at least two repeatable tests must be performed. If cyclic tests are performed, their results can provide a good indication of the influence of the roots. Considering the vane shear test as reference for obtaining su and sur, NT-bar obtained from tests not affected by the roots ranged from 8.8 to 10.9, with an average of 9.8, while Nrem, T-bar ranged from 14.1 to 19.5, with an average of 16.3. Therefore NT-bar values (related to the natural condition) were smaller than Nrem, T-bar (related to the remoulded condition). The equations suggested by Yafrate et al. (2009) to evaluate the remoulded penetration resistance, the whole degradation curve and the sensitivity, based only on the initial penetration and extraction resistances have provided good results for the Sarapuí II soft clay, except in the case of very shallow depths.
- 1 April 2011
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 137 (4) , 436-439
Discussion of “Evaluation of Remolded Shear Strength and Sensitivity of Soft Clay Using Full-Flow Penetrometers” by Nicholas Yafrate, Jason DeJong, Don DeGroot, and Mark Randolph
- 1 April 2011
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 137 (4) , 436-439
Discussion of “Evaluation of Remolded Shear Strength and Sensitivity of Soft Clay Using Full-Flow Penetrometers” by Nicholas Yafrate, Jason DeJong, Don DeGroot, and Mark Randolph