NANur Syamilah Arifin

Nur Syamilah Arifin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nur Syamilah Arifin has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modified magnetic flow of Williamson nanofluid over a stretching sheet with Newtonian heating

    by Nur Syamilah Arifin, Abdul Fatah Zainuddin, Ahmad Khudzairi Khalid, Nur Intan Syafinaz Ahmad, Wan Munirah Wan Mohamad, Abdul Rahman Mohd Kasim, Imran Ullah

    In systems where heat transfer and flow dynamics are crucial, the Williamson nanofluid model is a useful tool for studying non-Newtonian fluids. Numerous industrial applications, such as energy systems, manufacturing processes, and thermal management systems, depend on non-Newtonian fluid flows. In conjunction to this, this paper aims to investigate numerically the boundary layer flow of a Williamson nanofluid across a stretching sheet under modified magnetic influence and Newtonian heating (NH). Thus, the goal of the study is to investigate how the velocity and temperature profiles are affected by several characteristics, such as the concentration of nanoparticles, the strength of the magnetic field, the Williamson fluid properties, and thermal boundary conditions. To solve the nonlinear ordinary differential equations resulting from the application of similarity variables to the governing partial differential equations, the Runge–Kutta–Fehlberg (RKF45) method is utilized. To comprehend their impact on the fluid's behaviour and heat distribution, the analysis assesses several pertinent physical characteristics. The findings show that while magnetic effect reduces velocity, raising the Williamson parameter improves thermal performance. It is anticipated that these discoveries will advance our knowledge of non-Newtonian nanofluid flows and offer guidance for improving engineering systems that employ them.

  • Open Access

    Development of a MATLAB-Based CGPA and Final Exam Goal Calculator to Enhance Academic Planning in Higher Education

    by Nor Shafiqah Ahmad Jamil, Nurhazirah Mohamad Yunos, Aishah Mahat, Ahmad Khudzairi Khalid, Nur Syamilah Arifin, Norbaiti Tukiman

    In higher education, the Cumulative Grade Point Average (CGPA) serves as a vital metric for assessing academic performance and shaping students’ future opportunities. However, many students struggle to plan their CGPA since they have trouble predicting their final examination marks to be achieved after getting the carry marks. Hence, this study addresses these challenges by developing an intuitive CGPA and final examination goal calculator using a graphical user interface (GUI) in MATLAB. A comprehensive flowchart for the development process is also provided, along with a brief explanation of the interface for both calculators to guide users. Additionally, demonstrations of the calculators are illustrated through examples. A user perception survey was conducted to evaluate the usability, user experience, and interface quality of both calculators. The findings suggest that these calculators have a positive impact on students' academic planning at two key stages: the beginning of the semester and the end, after receiving ongoing assessment marks.

  • MHD Flow of Dusty Jeffrey Fluid Flow Containing Carbon Nano Tubes (CNTs) under Influences of Viscous Dissipation and Newtonian heating

    by N. A. N. N. Habib, N. S. Arifin, S. M. Zokri, A. R. M. Kasim

    This current research examines the behaviour of dusty Jeffrey fluid across an inclined stretching sheet with CNTs as well as aligned magnetohydrodynamic (MHD). By utilising the proper similarity transformation variables, the governing partial differential equations (PDEs) of the problem are converted to ordinary differential equations (ODEs). Then, the numerical results are produced by using the Runge-Kutta-Fehlberg (RKF45) approach with the aid of the MAPLE software. The findings include the visual illustrations of the impacts on the velocity and temperature profiles for several pertinent parameters. It clearly shows that the decline in velocity profile of fluid phase was caused by the rise in aligned angle, ratio of relaxation to retardation times, magnetic field and fluid particle interaction parameters. Meanwhile, for every parameter that is involved excluding ratio of retardation time in the fluid, the temperature profile rises in both the fluid and dusty phases. The results of this study add a unique perspective to the existing literature by offering fresh insights on the influence of CNTs and dust particles, examining their impact on two-phase flow over an inclined stretching sheet. This understanding can be utilized in the real-time application where rapid and efficient thermal management is critical such as electronics cooling or energy conversion systems. Furthermore, the inclusion of viscous dissipation and Newtonian heating (NH) effects contributes to the novelty of the research, providing a comprehensive understanding of the complex interactions in this unique fluid flow scenario.


  • Open Access

    Aligned MHD Jeffrey Fluid Flow Containing Carbon Nanoparticles over Exponential Stretching Sheet with Viscous Dissipation and Newtonian Heating Effects

    by Nor Aini Naili Noor Habib, Nur Syamilah Arifin, Syazwani Mohd Zokri, Abdul Rahman Mohd Kasim

    This study investigates the influence of viscous dissipation on aligned Magnetohydrodynamic (MHD) flow of Jeffry fluid containing Carbon Nanoparticles (CNTs) over an exponential stretching sheet with boundary condition of Newtonian Heating (NH). The model proposed by Tiwari and Das is adopted. The numerical computation using Runge-Kutta Fehlberg (RKF45) method is used to generate the results. The numerical solutions of the several parameters on the velocity and temperature profiles are analysed and presented graphically. It is revealed that an increase in aligned angle, magnetic field, and ratio of relaxation to retardation times leads to the decreasing in velocity and increasing in temperature profiles. Meanwhile, both velocity and temperature profiles increase with a rise in volume fraction parameter.


  • Open Access

    Dusty Casson Fluid Flow containing Single-Wall Carbon Nanotubes with Aligned Magnetic Field Effect over a Stretching Sheet

    by Nur Syamilah Arifin, Abdul Rahman Mohd Kasim, Syazwani Mohd Zokri, Siti Farah Haryatie, Mohd Zuki Salleh

    Two-phase flow is the mutual interaction between solid and fluid phases which encountered in real life applications, such as sedimentation, blood flow, water pollution, fluidized bed and to name a few. In the theoretical study, this binary mixture is represented by partial differential equations that denotes its physical properties of all phases. Therefore, the interaction between three important elements over a stretching sheet is examined in this study where the focus is on Casson fluid, single-wall carbon nanotubes (SWCNTs) and dust particles. Moreover, the aligned magnetic field effect and Newtonian heating (NH) are associate together to influence the flow region. In order to generate the results, the equations that governed the current model must therefore employ the similarity variables to produce the ordinary differential equations. Formulation of the problem is then continued by solving the resulting equations using Runge-Kutta Fehlberg (RKF45) method. Significant outputs for considered parameters are presented through graph. It is found that, the growing effect of fluid-particle interaction particle decreases the fluid phase distribution which contributes to the opposite trend in dust phase.


  • Open Access

    Free Convection Boundary Layer Flow of Brinkman-Viscoelastic Fluid over a Horizontal Circular Cylinder with Constant Wall Temperature

    by Siti Farah Haryatie Mohd Kanafiah, Abdul Rahman Mohd Kasim, Syazwani Mohd Zokri, Nur Syamilah Arifin, Nur Syahidah Nordin, Masyfu’ah Mokhtar

    The demand on the complex model on the study of fluid flow problem is crucial since the real fluid exist in industry applications cannot be presented by the conventional fluid anymore due to the complex properties of the materials. Since then, many mathematicians and scientist try to create the model that can be presented those fluids. Fluid which having characteristics viscous and elasticity can be categorized as non-Newtonian type of fluid due to its relations which against Newton’s Law of viscosity. The application of the fluid is widespread in industrial applications including oils and gas sectors, the automobile industry and manufacturing processes. Paints is one of the examples of viscoelastic fluid since almost wall is painted by the materials polymer and solvents. Therefore, this work is intended to investigate the viscoelastic fluid flow with the porosity condition which then called as Brinkman-viscoelastic model. The flow is presumed to transfer over a geometry horizontal circular cylinder (HCC). The thermal boundary condition is set to be constant wall temperature (CWT). The governing equations which based on Navier Stokes equations are first transformed to the less complex form by utilizing a non-dimensionless and a non-similarity variable. The resulting equations were obtained in the partial differential equations (PDEs) and at the lower stagnation point case, the model is reduced to the ordinary differential equations (ODEs). The Keller-box method (KBM) is applied to solved the final equations. The validation process is performed by direct comparing with the established output in literature and found to be in a very strong agreement. This process is valid since the present model can be reduced to the previous model at the limiting case where the identical equations were obtained. The results of the present model are then computed and presented in tabular form and also illustrated in graphical form. It is noticed that the viscoelastic parameter and Brinkman Parameter significantly affected the fluid flow characteristics.


  • Open Access

    How Fluid Particle Interaction Affects the Flow of Dusty Williamson Fluid

    by Abdul Rahman Mohd Kasim, Nur Syamilah Arifin, Syazwani Mohd Zokri, Noor Amalina Nisa Ariffin, Sharidan Shafie

    A model of two-phase flow involving non-Newtonian fluid is described to be more reliable to present the fluid that involves industrial applications due to the special characteristics in its behavior. Many models of non-Newtonian fluid were discovered in the last few decades but the model that captured the most attention is the Williamson model. The consideration of the existing particles in the Williamson flow (two-phase Williamson fluid) will make the model more interesting to investigate. Hence, this paper is aimed to explore the flow of two-phase Williamson fluid model in the presence of MHD and thermal radiation circumstances. The obtained ordinary differential equations after the transformations are solved using the Runge-Kutta Fehlberg (RKF45) method. The flow is considered asymmetric since it moves over a vertical stretching sheet with external stimuli. The result displays variation in dust phases compared to the fluid phase under distribution of velocity and temperature. It can be concluded that the fluid–particle interaction (FPI) parameter lessening the motion of fluid and heating characteristics. In addition, the upsurges on skin friction and heat transfer are resulting from the rising FPI. Furthermore, the presence of Williamson parameter increases the skin friction while causing degenerations on heat transfer of flow.


  • Open Access

    Flow Analysis of Brinkman-Viscoelastic Fluid in Boundary Layer Region of Horizontal Circular Cylinder

    by Siti Farah Haryatie Mohd Kanafiah, Abdul Rahman Mohd Kasim, Syazwani Mohd Zokri, Syamilah Arifin, Zati Iwani Abdul Manaf

    This paper examines the flow of Brinkman-viscoelastic fluid in the boundary layer region. The flow over a Horizontal Circular Cylinder (HCC) is investigated theoretically. The proposed model’s governing equations, which are partial differential equations (PDEs), are transformed to their simplest form by using the appropriate non-dimensional variables and non-similarity transformation. The numerical computations for the obtained equations are then computed using the Keller-box method (KBM) which is programmed in MATLAB R2019a software. The velocity distribution results, together with the coefficient of skin friction are presented. A comparison study with previously published results is carried out to ensure that the current findings are accurate. It is discovered that the presence of the Brinkman and viscoelastic parameters influences the velocity behaviour of fluid, with a tendency to decrease the velocity distribution of fluid. Furthermore, both parameters have the potential to decrease the skin friction coefficient. The output can be used as a starting point for complex flow problems that occur frequently in engineering applications.


  • Open Access

    Carboxymethyl Cellulose Based Second Grade Nanofluid around a Horizontal Circular Cylinder

    by Syazwani Mohd Zokri, Nur Syamilah Arifin, Zanariah Mohd Yusof, Nursyazni Mohd Sukri, Abdul Rahman Mohd Kasim, Nur Atikah Salahudin, Mohd Zuki Salleh

    Modern challenges include improving heat transmission in a range of industries, including electronics, heat exchangers, bio and chemical reactors, etc. Innovative heat transfer fluids like nanofluids have the potential to increase energy transport effectively. This gain is attained as a result of improved effective thermal conductivity and modified fluid flow dynamics. Therefore, the topic of this paper is improving heat transmission using nanofluids. The objective is to deal with the second grade fluid model passing through a horizontal circular cylinder with mixed convection and suspended nanoparticles. The respective nanoparticles and based fluid of Copper (Cu) and carboxymethyl cellulose (CMC-water) are considered. Both non-dimensional and non-similarity transformation variables are utilized to convert the governing equations to a system of partial differential equations (PDEs). Reduction to ordinary differential equations (ODEs) is attained from the resulting PDEs at the lower stagnation area and then tackled via the Runge-Kutta Fehlberg technique (RKF45) in the Maple software. Graphs are used to illustrate the detailed description of the results of dimensionless parameters like the Biot number, mixed convection, and the second grade parameter. Results show that the fluid slows down while the temperature increases as the value of second grade parameter rises.


  • Open Access

    Two-Phase Flow of Eyring–Powell Fluid with Temperature Dependent Viscosity over a Vertical Stretching Sheet

    by Ahlam Aljabali, Abdul Rahman Mohd Kasim, Nur Syamilah Arifin, Noor Amalina Nisa Ariffin, Dennis Ling Chuan Ching, Iskandar Waini, Najiyah Safwa Khashi’ie, Nurul Amira Zainal

    In this work, the mixed convection flow of non-Newtonian Eyring–Powell fluid with the effects of temperature dependent viscosity (TDV) were studied together with the interaction of dust particles under the influence of Newtonian Heating (NH) boundary condition, which assume to move over a vertical stretching sheet. Alternatively, the dusty fluid model was categorized as a two-phase flow that consists of phases of fluid and dust. Through the use of similarity transformations, governing equations of fluid and dust phases are reduced into ordinary differential equations (ODE), then solved by efficient numerical Keller–box method. Numerical solution and asymptotic results for limiting cases will be presented to investigate how the flow develops at the leading edge and its end behaviour. Comparison with the published outputs in literature evidence verified the precision of the present results. Graphical diagrams presenting velocity and temperature profiles (fluid and dust) were conversed for different influential parameters. The effects of skin friction and heat transfer rate were also evaluated. The discovery indicates that the presence of the dust particles have an effect on the fluid motion, which led to a deceleration in the fluid transference. The present flow model can match to the single phase fluid cases if the fluid particle interaction parameter is ignored. The fluid velocity and temperature distributions are always higher than dust particles, besides, the opposite trend between both phases is noticed with β. Meanwhile, both phases share the similar trend in conjunction with the rest factors. Almost all of the temperature profiles are not showing a significant change, since the viscosity of fluid is high, which can be perceived in the figures. Furthermore, the present study extends some theoretical knowledge of two-phase flow.