Olga S. Yakymenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Olga S. Yakymenko has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Valerii Anatoliiovych Barbash
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
8 shared publications - Olha Vasylivna Yashchenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
7 shared publications S. O. Bakhman
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications- Volodymyr Myshak
Institute of Macromolecular Chemistry of the National Academy of Sciences of Ukraine, Kiev, Ukraine
2 shared publications - Anna S. Gondovska
Candidate of Technical Sciences Department of Ecology and Technology of Plant Polymers National Technical Department of Ecology and Technology of Plant Polymers National Technical Department of Ecology and Technology of Plant Polymers National Technical Associate Professor University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute" University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
1 shared publication - Mykhailo Dusheiko
V. Lashkaryov Institute of Semiconductor Physics, National Academy of Sciences of Ukraine, 41 Nauky Avenue, 03028 Kyiv, Ukraine
1 shared publication
Latest Publications
- 4 December 2024
- Published by Springer Nature
- p. 39-52
Extraction and Use of Nanocellulose from Non-wood Plant Materials in the Composition of Paper and Cardboard
- 4 December 2024
- Published by Springer Nature
- p. 39-52
Extraction and Use of Nanocellulose from Non-wood Plant Materials in the Composition of Paper and Cardboard
- 1 November 2024
- Published by Springer Nature
- p. 13-26
Extraction and Use of Nanocellulose from Non-wood Plant Materials in the Composition of Paper and Cardboard
- 1 November 2024
- Published by Springer Nature
- p. 13-26
Extraction and Use of Nanocellulose from Non-wood Plant Materials in the Composition of Paper and Cardboard
- 2 November 2023
- Published by Springer Nature
- p. 3-17
Extraction of Organosolv Pulp and Nanocellulose from Harvested Corn Residues
- 2 November 2023
- Published by Springer Nature
- p. 3-17
Extraction of Organosolv Pulp and Nanocellulose from Harvested Corn Residues
- 7 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 7 (10) , 1-4
Nanocellulose-Based Composites for Flexible and Biodegradable Humidity Sensors for Breath Monitoring
In this work, capacitive humidity sensors were made from flexible and biodegradable films of nanocellulose-containing composites. Nanocellulose (NC) was extracted from wheat straw by acid hydrolysis. The composites were made by mixing NC suspension and polyvinyl alcohol (PVA) solution in different ratios of 25%:75%, 50%:50%, and 75%:25% by weight. The self-standing films were obtained by drying the solution in a Petri dishes. Measuring electrodes were deposited on the surface of NC-PVA composite films by magnetron deposition technique through a special stencil in the form of an unfolded capacitor. Such device parameters as sensitivity, response, reversibility, repeatability, response time, recovery time, and stability were measured. It was determined that sensors based on pure PVA have the highest value of sensitivity and response: 6,36 pF/%RH and 85.6 pF, respectively. However, the sensors made from pure nanocellulose show the highest speed (response time is 710 s and recovery time is 60 s) and the best short-term stability (signal deviation does not exceed 5%). At the same time, as the PVA content in the composite increased, the strength is decreased, and the plasticity of the material is increased. This makes it possible to develop sensors with specified characteristics. Such sensors have also been successfully used to monitor human respiratory activity.
- 7 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 7 (10) , 1-4
Nanocellulose-Based Composites for Flexible and Biodegradable Humidity Sensors for Breath Monitoring
In this work, capacitive humidity sensors were made from flexible and biodegradable films of nanocellulose-containing composites. Nanocellulose (NC) was extracted from wheat straw by acid hydrolysis. The composites were made by mixing NC suspension and polyvinyl alcohol (PVA) solution in different ratios of 25%:75%, 50%:50%, and 75%:25% by weight. The self-standing films were obtained by drying the solution in a Petri dishes. Measuring electrodes were deposited on the surface of NC-PVA composite films by magnetron deposition technique through a special stencil in the form of an unfolded capacitor. Such device parameters as sensitivity, response, reversibility, repeatability, response time, recovery time, and stability were measured. It was determined that sensors based on pure PVA have the highest value of sensitivity and response: 6,36 pF/%RH and 85.6 pF, respectively. However, the sensors made from pure nanocellulose show the highest speed (response time is 710 s and recovery time is 60 s) and the best short-term stability (signal deviation does not exceed 5%). At the same time, as the PVA content in the composite increased, the strength is decreased, and the plasticity of the material is increased. This makes it possible to develop sensors with specified characteristics. Such sensors have also been successfully used to monitor human respiratory activity.
- 20 July 2023
- Published by Springer Nature in Applied Nanoscience
- Vol. 13 (12) , 7455-7468
Extraction, properties and use of nanocellulose from corn crop residues
- 20 July 2023
- Published by Springer Nature in Applied Nanoscience
- Vol. 13 (12) , 7455-7468
Extraction, properties and use of nanocellulose from corn crop residues
- 1 March 2023
- Published by Springer Nature
- p. 243-254
Extraction and Properties of Nanocellulose from Hemp Fibers
- 1 March 2023
- Published by Springer Nature
- p. 243-254
Extraction and Properties of Nanocellulose from Hemp Fibers
- 2 August 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (15) , 8305-8317
Preparation of hemp nanocellulose and its use to improve the properties of paper for food packaging
- 2 August 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (15) , 8305-8317
Preparation of hemp nanocellulose and its use to improve the properties of paper for food packaging
- Open Access
- 30 June 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in KPI Science News
- No. 2
NANOCELLULOSE FROM REED STALKS TO IMPROVE THE PROPERTIES OF PAPER FOR PACKAGING FOOD PRODUCTS
Background. The development of technologies for obtaining materials from plant raw materials, the use of which improves the consumer properties of cardboard and paper products and does not pollute the environment with harmful substances from synthetic polymers, is an urgent problem of our time. Objective. The purpose of the paper is to obtain pulp and nanocellulose from reed stalks by environmentally friendly methods and apply nanocellulose to improve the quality parameters of paper for packaging food products on automatic machines. Methods. To obtain pulp from reed stalks with a minimum residual content of lignin and minerals, two processing stages were used: alkaline extraction and organosolv cooking at a temperature of 97 ± 2 °C. Nanocellulose was obtained by the oxidation of organosolv reed pulp with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in the TEMPO / NaBr / NaClO system, which is more environmentally friendly than acid hydrolysis. The resulting nanocellulose was applied to paper samples from waste paper and sulphate unbleached pulp at a consumption from 1 to 3 g/m2. Results. Organosolv pulp was obtained from reed stalks with a residual lignin content of 0.53 % and an ash content of 0.045 %, which was used to obtain nanocellulose. The resulting nanocellulose particles have a transverse size in the range of 5–20 nm, a length of up to several micrometers, and the tensile strength of nanocellulose films is up to 60 MPa. It is shown that the application of nanocellulose to the surface of the samples increases the breaking strength and breaking length, and reduces the surface absorbency of paper. It was determined that with a nanocellulose consumption of up to 3 g/m2, paper samples have indicators that meet the requirements of the standard for paper for packaging food products on automatic machines. Conclusions. The use of nanocellulose from reed stalks as a hardening substance for paper production will allow replacing environmentally harmful polymer additives and up to 50 % of more expensive softwood pulp with waste paper, while maintaining paper quality indicators at the level of standard requirements.
- 30 June 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in KPI Science News
- No. 2
Open AccessNANOCELLULOSE FROM REED STALKS TO IMPROVE THE PROPERTIES OF PAPER FOR PACKAGING FOOD PRODUCTS
Background. The development of technologies for obtaining materials from plant raw materials, the use of which improves the consumer properties of cardboard and paper products and does not pollute the environment with harmful substances from synthetic polymers, is an urgent problem of our time. Objective. The purpose of the paper is to obtain pulp and nanocellulose from reed stalks by environmentally friendly methods and apply nanocellulose to improve the quality parameters of paper for packaging food products on automatic machines. Methods. To obtain pulp from reed stalks with a minimum residual content of lignin and minerals, two processing stages were used: alkaline extraction and organosolv cooking at a temperature of 97 ± 2 °C. Nanocellulose was obtained by the oxidation of organosolv reed pulp with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in the TEMPO / NaBr / NaClO system, which is more environmentally friendly than acid hydrolysis. The resulting nanocellulose was applied to paper samples from waste paper and sulphate unbleached pulp at a consumption from 1 to 3 g/m2. Results. Organosolv pulp was obtained from reed stalks with a residual lignin content of 0.53 % and an ash content of 0.045 %, which was used to obtain nanocellulose. The resulting nanocellulose particles have a transverse size in the range of 5–20 nm, a length of up to several micrometers, and the tensile strength of nanocellulose films is up to 60 MPa. It is shown that the application of nanocellulose to the surface of the samples increases the breaking strength and breaking length, and reduces the surface absorbency of paper. It was determined that with a nanocellulose consumption of up to 3 g/m2, paper samples have indicators that meet the requirements of the standard for paper for packaging food products on automatic machines. Conclusions. The use of nanocellulose from reed stalks as a hardening substance for paper production will allow replacing environmentally harmful polymer additives and up to 50 % of more expensive softwood pulp with waste paper, while maintaining paper quality indicators at the level of standard requirements.