AZAref Rasoulzadeh Zali

Aref Rasoulzadeh Zali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Aref Rasoulzadeh Zali has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Densely integrated low polarization dependent 8 × 8 optical switch for optical network applications

    by Aref Rasoulzadeh Zali, Marijn Rombouts, Steven Kleijn, Luc Augustin, Nicola Calabretta

    We investigate and demonstrate a modular non-blocking 8 × 8 photonic integrated switch configuration based on broadcast& select to route signals to all possible outputs. The photonic integrated switch is based on InP active/passive technology and exploits semiconductor optical amplifiers (SOA) as an optical switch and amplifier. In InP photonic integrated circuits, the growth rate enhancement (GRE) effect during selective area epitaxy limits the high-density integration of a compact array of SOAs, requiring a minimum pitch exceeding 100 μm for the butt-joint co-integration technique. Over time, the increasing maturity of InP PIC has enabled the fabrication of progressively scalable, complex, and compact switch circuits with high radix. Using a recently developed technique, SOAs can be placed densely — nearly five times more densely by narrowing the active island width from 20 μm to 8 μm — allowing flexibility in designing PIC switches based on SOAs. Here, we report and demonstrate, for the first time, an ultra-compact, polarization-insensitive 8 × 8 switch by positioning SOA arrays with a 60 μm pitch in an active-passive integrated InP platform. Multiple measured paths show promising results: gain over 20 dB, PDG under 3 dB, and high OSNR over 40 dB across the full C-band. We demonstrated that the switch exhibits a high extinction ratio, enabling effective crosstalk suppression between adjacent channels. Experimental data transmission assessments demonstrate operation at high bit rates of 30 Gbps with a low power penalty of less than 1 dB at a BER of 10-9. The switch’s dynamic power penalty range exhibits a wide variation of over 20 dB, along with an input power dynamic range of over 15 dB for a power penalty of less than 3 dB at 10 Gbps and 30 Gbps NRZ signals. This demonstration paves the way for supporting compact, scalable, and high-speed commercial interconnect technologies for integrated optical devices.

  • Assessment of low polarization sensitive InP photonic integrated multicast and select switch with commercial 400G-ZR transceivers

    by Shiyi Xia, Aref Rasoulzadeh Zali, Oded Raz, Nicola Calabretta

    The increasing demand for high-capacity optical networks necessitates innovative solutions for efficient traffic aggregation and dynamic routing. To address these challenges, this study presents the first experimental demonstration of a 400Gbps low polarization-sensitive multicast selective switch(MCS) implemented on an InP-based photonic integrated circuit (PIC). The switch integrates advanced active Semiconductor Optical Amplifier (SOA) technology and passive multimode interference (MMI) power splitters, achieving an on-chip gain exceeding 30 dB, a net fiber gain of 5.5 dB, and a noise figure (NF) of 6.6 dB, and a more than 35 dB switching extinction ratio. A comprehensive evaluation of the switch's performance in a 400Gbps dual-polarization(DP) coherent transmission setup demonstrates its ability to achieve error-free transmission with an optical signal-to-noise ratio (OSNR) penalty of less than 0.3 dB and a low polarization-dependent loss (PDL) below 1.8 dB.

  • Chaotic relaxation spike suppression in gain-switched semiconductor Fano laser

    by Arash Hodaei, Hassan Kaatuzian, Aref Rasoulzadeh Zali

    Fano semiconductor lasers have gained attention for their ultra-narrow linewidths and strong dispersive properties. Among pulse generation methods, gain switching, driven by a short electrical current pulse, is simple and effective. It typically includes an initial spiking phase followed by a quasi–steady state. Here, we numerically study the effect of a pre-pump current applied before the main injection in an InP-based C-band (λ r = 1554 nm) photonic crystal (PhC) Fano laser and its impact on pulse dynamics. The results show that in higher quality-factor nanocavity (NC) of Fano lasers ( Q =1000 ) effectively reduces the amplitude of the main spike in the cross-port ( P x ) nanosecond optical pulse and improves spike suppression output. The simulations further reveal that increasing the injection current from J = 5 to 15×J th suppresses relaxation spikes, resulting in a nearly square-shaped optical pulse at higher current levels. Additionally, under constant current conditions, increasing the cavity length (from L = 5 to 11 µm ), in different Q values, leads to an increase in the main spike amplitude and the emergence of additional spikes due to the longer photon lifetime.

  • Densely Integrated Photonic 8×8 Broadcast & Select Space Switch for High-Capacity Interconnects

    by Marijn Rombouts, Aref Rasoulzadeh Zali, Stefanos Andreou, Luc Augustin, Nicola Calabretta

    Optical interconnects bring fast and efficient data transfer to data centers and AI clusters. Optical switches can further boost this development by reducing network switch expenses with a significant reduction in power consumption. In order to build switches with a meaningful number of ports, increasing the density of large scale integrated photonic switch fabrics is a must. One density bottleneck are the SOAs, which requires a minimum spacing of 250 μm. This work shows the design, fabrication and characterization for a densely integrated 8× 8 photonic InP space switch using the broadcast-and-select topology. Experimental characterization confirms that an increase in SOA density by 4.2x has a limited impact on the optical performance. The measured on/off ratio is on average 53 dB, resulting in a low crosstalk. The fiber-to-fiber noise figure is 12 dB and the fiber-to-fiber insertion loss is 17 dB, which is a result of the short SOAs used on the chip. Compatibility with high-capacity interconnects is demonstrated using a four channel 100G LWDM transceiver, achieving a 1.25 dB power penalty and using a PAM-4 modulated single channel interconnect with a power penalty of 0.8 dB.


  • Design and investigation of low polarization strained-barrier quantum well SOA co-integrated with passive waveguides

    by Aref Rasoulzadeh Zali, Ripalta Stabile, Nicola Calabretta

    We propose a novel layerstack for polarization-insensitive (PI) multi quantum well (MQW) semiconductor optical amplifiers (SOAs) using a ternary InGaAs/InGaAs active layer with a tensile-strained barrier. This design achieves PI performance by enhancing TM-mode gain and is compatible with passive waveguides for passive-active co-integration. The SOA exhibits a high gain of 30 dB, broadband operation of 100 nm, and low polarization-dependent gain (PDG), ranging from 1-3.5 dB (in the full C-band). By widening the waveguide width from 1 μm to 3 μm, the output saturation power increases from 6 dBm to 12 dBm. Finally, we present the fabrication tolerance of SOAs.


  • Monolithically Integrated Ultra-dense Polarization Insensitive 8x8 InP Switch for Optical Networks

    by Aref Rasoulzadeh Zali, Marijn Rombouts, Shiyi Xia, Steven Kleijn, Luc Augustin, Nicola Calabretta

    For the first time, we experimentally demonstrated an ultra-dense polarization-insensitive C-band 8x8 broadcast&select switch based on bulk SOAs. Results show broadband net-gain, low PDG<2dB, error-free operation with <0.2dB power-penalty at 30Gbps NRZ-modulated signal in C-band.


  • Open Access

    Design and Demonstration of an O-Band InP Monolithically Integrated SOA-Based Broadcast and Select Optical Space Switch

    by Marijn Rombouts, Aref Rasoulzadeh Zali, Stefanos Andreou, Luc Augustin, Nicola Calabretta

    With the increasing requirements of optical interconnects in high-performance artificial intelligence compute clusters, optical space switches could provide a fast and efficient alternative to existing power-hungry electronic network switches. This work shows the design, fabrication and characterization of the first fully InP monolithically integrated, O-band compatible space switch, using semiconductor optical amplifiers configured in a broadcast-and-select topology. We demonstrate an average fiber-to-fiber insertion loss of 10 dB per optical path and an optical bandwidth of 37 nm. Since no gain saturation is observed, the OSNR is measured up to 47.5 dB. As a result, the transmission experiments show good performance with no distortion and a power penalty below 0.7 dB at 10 Gb/s NRZ, 100 GB/s PAM-4 and using a 100 G LWDM LR4 commercial transceiver with 4 wavelength channels at 25 Gb/s NRZ. We discuss the scalability of the broadcast-and-select topology and demonstrate the viability of an 8 × 8 space switch, which shows comparable results to the 4 × 4 space switch with a negligible power penalty for the majority of the LWDM channels. Based on the results, we discuss the prospects for future designs and highlight potential scalability to larger switches.


  • Photonic WDM switches architecture for multi-band optical networks

    by Shiyi Xia, Zhouyi Hu, Marijn Rombouts, Henrique Freire Santana, Yu Wang, Aref Rasoulzadeh Zali, Oded Raz, Nicola Calabretta

    Addressing the capacity, low cost, and low power challenges of 6G distribution networks, this paper proposes and demonstrates a multi-band optical metro-access network architecture employing semiconductor optical amplifier (SOA)-based wavelength division multiplexing (WDM) switches as low-cost and low-power multi-band optical add-drop multiplexers (MB-OADMs) to extend the capacity beyond C-band limits. We implemented and evaluated the performance of an SOA-based MB-OADM prototype in the C- and O-bands including the network reconfigurability, the node scalability, and the capability to support high-capacity transmission. Experimental results show that the MB-OADM-based network maintains high optical signal-to-noise ratio (OSNR) values up to 35.38 dB in the C-band and 33.56 dB in the O-band over 100 km across five nodes with a 20 km linkspan in between (a total of 100 km) without additional optical amplifiers at 25 Gbps. This work also assesses the MB-OADM-based network scalability in terms of nodes and data rate. Results indicated that the architecture supports cascading through nine C-band nodes over 45 km with a 3.6 dB power penalty at 25 Gbps for a bit error rate (BER) of 10−6 and through four O-band nodes with a 3 dB penalty at 25 Gbps for a BER of 10−6, maintaining nearly uniform power levels across channels at a BER under the FEC threshold. It successfully demonstrates PAM-4 at 50 Gbps and 100 Gbps data rate transmission operation crossing four nodes over a 4 km distance, with 2 dB and 2.4 dB power penalty at a BER of 10−3 in the C-band and 1.85 dB and 2.2 dB power penalty at a BER of 10−3 in the O-band, respectively.


  • Design and Analysis of Novel Monolithically Integrated Bulk InAlGaAs/InP Polarization Insensitive O-band SOA for Data Center Applications

    by Aref Rasoulzadeh Zali, Marijn Romboutes, Nicola Calabretta

    We design and propose a novel low polarization-dependent InAlGaAs bulk SOA that can be integrated with passive waveguides. Low butt-coupled reflection < 2×10-5, low polarization-dependent gain < 3dB is achieved with > 15 dB gain.

  • Assessment of Low Polarization Dependent Multicast and Select Switch Based on Bulk SOA for Data Center Application

    by Aref Rasoulzadeh Zali, Netsanet M. Tessema, Steven Kleijn, Luc Augustin, Ripalta Stabile, Nicola Calabretta

    We have designed, fabricated, and characterized a low polarization dependent multicast and select (MCS) switch based on a newly developed novel bulk SOA co-integrated with passive waveguides. The proposed new bulk SOA-based MCS switch requires the co-integration of active SOAs (gate and booster) with several passive InP elements. First, we have presented a theoretical analysis and the design and properties of the proposed bulk SOA and demonstrated its low polarization-dependent properties. Then, we evaluated and characterized the switch's performance, including gain, optical signal-to-noise ratio (OSNR), and data transmission features. The experimental results verify that the MCS switch exhibits polarization-dependent gain in the range of 0.1 to 2.2 dB for all ports and a broadband gain of approximately 70 nm across all ports. The measured OSNR, for all channels, is > 42 dB at 1580 nm. Moreover, experimental data transmission assessments show operation at high bitrates of 30 Gb/s with a low power penalty of less than 1 dB at 10 −9 . The dynamic power penalty range of the switch is also investigated. The MCS switch exhibits a wide range of > 20 dB input power dynamic range for a power penalty of less than 3 dB for a 10 Gb/s NRZ signal.