Chirag Padubidri
Chirag Padubidri has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Savvas Karatsiolis
Cyens Centre of Excellence, Dimarchou Lellou Dimitriadi 23, Nicosia 1016, Cyprus
7 shared publications - Andreas Kamilaris
Cyens Centre of Excellence, Dimarchou Lellou Dimitriadi 23, Nicosia 1016, Cyprus
6 shared publications Andreas Kamilaris
5 shared publicationsAndreas Lanitis
CYENS Center of Excellence Nicosia Cyprus
2 shared publications- Panos Hadjinicolaou
Climate and Atmosphere Research Center (CARE-C), The Cyprus Institute, Nicosia, Cyprus
2 shared publications Alexis Charalambous
CYENS Centre of Excellence
1 shared publication
Latest Publications
- Open Access
- 6 September 2026
- Published by Elsevier in Urban Climate
- Vol. 69
Decomposing urban heat islands at the micro-scale: A hybrid physics-inspired and data-driven modelling framework
- 6 September 2026
- Published by Elsevier in Urban Climate
- Vol. 69
Open AccessDecomposing urban heat islands at the micro-scale: A hybrid physics-inspired and data-driven modelling framework
- Open Access
- 20 May 2026
- Published by Elsevier in SSRN Electronic Journal
Decomposing Urban Heat Islands at Micro-Level: A Hybrid Physics-Inspired and Data-Driven Modelling Framework
We propose a hybrid physics-inspired, data-driven framework that decomposes the canopy-layer urban-rural air temperature difference into a location-specific Urban Heat Island potential (UHIp) and a weather-driven modulation (UHIm), with a learnable vehicle-induced convective bias correction. The framework is applied to Nicosia, Cyprus - a compact, hot semi-arid Mediterranean city - using 700,000 measurements acquired during August - September 2025 from custom sensors on the Municipality of Nicosia's operational fleet, referenced to the Athalassa meteorological station. Learned embeddings over 863 grid cells of 200×200 m implicitly encode local morphology, while a 92-hour antecedent meteorological record drives UHIm estimation. Validation against six independent stations yields a MAE of 0.25_1.09 ◦C. The model recovers a physically coherent diurnal reversal: a morning cool island regime (mean ΔT of −0.7 to −1.3◦C) transitions to a city-wide heat island in the afternoon (+2.4 to +3.1◦C) that persists nocturnally (+1.4 to +1.6◦C). UHIp correlates with surface and terrain characteristics, confirming physical interpretability. Local Climate Zone stratification reveals the highest UHIp in compact low-rise zones and the lowest in open low-rise, with realised urban-rural differences reaching 3-4◦C mid-afternoon. Crucially, during the 42◦C+ heatwave of 9-11 August, UHIm approaches zero, indicating that extreme atmospheric overheating suppresses the urban-rural differential precisely when thermal stress peaks. Trained on opportunistic municipal fleet data, this physics-inspired decomposition yields interpretable, high-resolution micro-scale UHI characterisation, directly relevant to urban planning and climate-resilience strategies in Mediterranean cities.
- 20 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDecomposing Urban Heat Islands at Micro-Level: A Hybrid Physics-Inspired and Data-Driven Modelling Framework
We propose a hybrid physics-inspired, data-driven framework that decomposes the canopy-layer urban-rural air temperature difference into a location-specific Urban Heat Island potential (UHIp) and a weather-driven modulation (UHIm), with a learnable vehicle-induced convective bias correction. The framework is applied to Nicosia, Cyprus - a compact, hot semi-arid Mediterranean city - using 700,000 measurements acquired during August - September 2025 from custom sensors on the Municipality of Nicosia's operational fleet, referenced to the Athalassa meteorological station. Learned embeddings over 863 grid cells of 200×200 m implicitly encode local morphology, while a 92-hour antecedent meteorological record drives UHIm estimation. Validation against six independent stations yields a MAE of 0.25_1.09 ◦C. The model recovers a physically coherent diurnal reversal: a morning cool island regime (mean ΔT of −0.7 to −1.3◦C) transitions to a city-wide heat island in the afternoon (+2.4 to +3.1◦C) that persists nocturnally (+1.4 to +1.6◦C). UHIp correlates with surface and terrain characteristics, confirming physical interpretability. Local Climate Zone stratification reveals the highest UHIp in compact low-rise zones and the lowest in open low-rise, with realised urban-rural differences reaching 3-4◦C mid-afternoon. Crucially, during the 42◦C+ heatwave of 9-11 August, UHIm approaches zero, indicating that extreme atmospheric overheating suppresses the urban-rural differential precisely when thermal stress peaks. Trained on opportunistic municipal fleet data, this physics-inspired decomposition yields interpretable, high-resolution micro-scale UHI characterisation, directly relevant to urban planning and climate-resilience strategies in Mediterranean cities.
- Open Access
FrogDeepSDM: Improving Frog Counting and Occurrence Prediction Using Multimodal Data and Pseudo-Absence Imputation
Monitoring species distribution is vital for conservation efforts, enabling the assessment of environmental impacts and the development of effective preservation strategies. Traditional data collection methods, including citizen science, offer valuable insights but remain limited in coverage and completeness. Species Distribution Modelling (SDM) helps address these gaps by using occurrence data and environmental variables to predict species presence across large regions. In this study, we enhance SDM accuracy for frogs (Anura) by applying deep learning and data imputation techniques using data from the "EY - 2022 Biodiversity Challenge." Our experiments show that data balancing significantly improved model performance, reducing the Mean Absolute Error (MAE) from 189 to 29 in frog counting tasks. Feature selection identified key environmental factors influencing occurrence, optimizing inputs while maintaining predictive accuracy. The multimodal ensemble model, integrating land cover, NDVI, and other environmental inputs, outperformed individual models and showed robust generalization across unseen regions. The fusion of image and tabular data improved both frog counting and habitat classification, achieving 84.9% accuracy with an AUC of 0.90. This study highlights the potential of multimodal learning and data preprocessing techniques such as balancing and imputation to improve predictive ecological modeling when data are sparse or incomplete, contributing to more precise and scalable biodiversity monitoring.
Open AccessFrogDeepSDM: Improving Frog Counting and Occurrence Prediction Using Multimodal Data and Pseudo-Absence Imputation
Monitoring species distribution is vital for conservation efforts, enabling the assessment of environmental impacts and the development of effective preservation strategies. Traditional data collection methods, including citizen science, offer valuable insights but remain limited in coverage and completeness. Species Distribution Modelling (SDM) helps address these gaps by using occurrence data and environmental variables to predict species presence across large regions. In this study, we enhance SDM accuracy for frogs (Anura) by applying deep learning and data imputation techniques using data from the "EY - 2022 Biodiversity Challenge." Our experiments show that data balancing significantly improved model performance, reducing the Mean Absolute Error (MAE) from 189 to 29 in frog counting tasks. Feature selection identified key environmental factors influencing occurrence, optimizing inputs while maintaining predictive accuracy. The multimodal ensemble model, integrating land cover, NDVI, and other environmental inputs, outperformed individual models and showed robust generalization across unseen regions. The fusion of image and tabular data improved both frog counting and habitat classification, achieving 84.9% accuracy with an AUC of 0.90. This study highlights the potential of multimodal learning and data preprocessing techniques such as balancing and imputation to improve predictive ecological modeling when data are sparse or incomplete, contributing to more precise and scalable biodiversity monitoring.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
SPYCE: A Multi-Modal Rodent Monitoring Device for Enhanced Detection, Monitoring, and Behavior Analysis
Rodents pose a significant threat to agriculture, causing extensive damage to crops, infrastructure, and ecosystem health. This pressing issue necessitates innovative, sustainable management solutions. SPYCE, a rodent-monitoring device (RMD), is designed to provide a flexible, adaptable solution for rodent detection, monitoring, and behavior-analysis. Developed as part of the MED4PEST project, which focuses on advancing ecologically based rodent management by reducing reliance on synthetic pest-control methods and promoting sustainable, eco-friendly farming systems tailored to the Mediterranean-region. SPYCE’s modular, customizable configuration allows users to select sensors based on operational requirements and budget constraints, emphasizing open accessibility, tailored functionality, and cost-effective deployment.SPYCE is a T-shaped device designed for flexible deployment at greenhouse entry points and fenced agricultural fields. Its design allows rodents to enter and exit freely, facilitating precise monitoring. The T-joint structure includes a horizontal base pipe equipped with PIR sensors at each entrance to detect movement. A housing at the top of the vertical pipe contains critical sensors such as an ultrasonic sensor, ultrasonic microphone, and infrared camera oriented downward toward the T-joint, all integrated with a Raspberry-Pi. A mmWave-radar sensor monitors external movement signatures. A temperature-humidity sensor collects environmental data, while a protective top cover shields the electronics from dust and water.The system firmware, developed in Python, supports three operational modes for various monitoring needs. In Mode-1, PIR sensors at the entrances activate the system, which waits for ultrasonic-sensor confirmation to initiate data collection. In Mode-2, the ultrasonic sensor detects motion at the central joint, directly triggering data acquisition. In Mode-3, the infrared camera operates continuously, detecting motion through background changes and activating other sensors when a rodent is detected. Across all modes, temperature-humidity data are recorded at regular intervals. Additionally, separate code records movement signatures using the mmWave radar. SPYCE’s modular design adapts to diverse operational requirements while maintaining accuracy and reliability in data collection. Furthermore, SPYCE is open-source, with hardware designs, scripts, and implementation details available on GitHub (https://github.com/superworld-cyens/MED4PEST), enabling researchers and practitioners to replicate and customize SPYCE for rodent monitoring.SPYCE is currently deployed at pilot sites in Greece and Turkey, actively collecting rodent-activity data. This data will serve as the foundation for developing a multi-modal deep-learning model capable of detecting, counting, and analyzing rodent behavior with high precision. Additionally, multi-modal anomaly-detection techniques will investigate behavioral changes in rodents under EBRM and non-EBRM conditions, providing valuable insights. These pilot deployments will validate SPYCE’s potential as an effective tool for assessing EBRM strategies. This work can also extend to broader rodent-management applications, including population estimation, behavioral analysis, and ecological monitoring.Funding: This work is part of MED4PEST, funded under the PRIMA Programme, an Art.185 initiative co-funded by Horizon-2020, the EU’s Research and Innovation Programme. Additional funding was provided by the General Secretariat for Research and Innovation, Greece; the Scientific and Technological Research Council of Turkey; the EU Horizon-2020 Research and Innovation Programme (grant No. 739578); and the Government of the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessSPYCE: A Multi-Modal Rodent Monitoring Device for Enhanced Detection, Monitoring, and Behavior Analysis
Rodents pose a significant threat to agriculture, causing extensive damage to crops, infrastructure, and ecosystem health. This pressing issue necessitates innovative, sustainable management solutions. SPYCE, a rodent-monitoring device (RMD), is designed to provide a flexible, adaptable solution for rodent detection, monitoring, and behavior-analysis. Developed as part of the MED4PEST project, which focuses on advancing ecologically based rodent management by reducing reliance on synthetic pest-control methods and promoting sustainable, eco-friendly farming systems tailored to the Mediterranean-region. SPYCE’s modular, customizable configuration allows users to select sensors based on operational requirements and budget constraints, emphasizing open accessibility, tailored functionality, and cost-effective deployment.SPYCE is a T-shaped device designed for flexible deployment at greenhouse entry points and fenced agricultural fields. Its design allows rodents to enter and exit freely, facilitating precise monitoring. The T-joint structure includes a horizontal base pipe equipped with PIR sensors at each entrance to detect movement. A housing at the top of the vertical pipe contains critical sensors such as an ultrasonic sensor, ultrasonic microphone, and infrared camera oriented downward toward the T-joint, all integrated with a Raspberry-Pi. A mmWave-radar sensor monitors external movement signatures. A temperature-humidity sensor collects environmental data, while a protective top cover shields the electronics from dust and water.The system firmware, developed in Python, supports three operational modes for various monitoring needs. In Mode-1, PIR sensors at the entrances activate the system, which waits for ultrasonic-sensor confirmation to initiate data collection. In Mode-2, the ultrasonic sensor detects motion at the central joint, directly triggering data acquisition. In Mode-3, the infrared camera operates continuously, detecting motion through background changes and activating other sensors when a rodent is detected. Across all modes, temperature-humidity data are recorded at regular intervals. Additionally, separate code records movement signatures using the mmWave radar. SPYCE’s modular design adapts to diverse operational requirements while maintaining accuracy and reliability in data collection. Furthermore, SPYCE is open-source, with hardware designs, scripts, and implementation details available on GitHub (https://github.com/superworld-cyens/MED4PEST), enabling researchers and practitioners to replicate and customize SPYCE for rodent monitoring.SPYCE is currently deployed at pilot sites in Greece and Turkey, actively collecting rodent-activity data. This data will serve as the foundation for developing a multi-modal deep-learning model capable of detecting, counting, and analyzing rodent behavior with high precision. Additionally, multi-modal anomaly-detection techniques will investigate behavioral changes in rodents under EBRM and non-EBRM conditions, providing valuable insights. These pilot deployments will validate SPYCE’s potential as an effective tool for assessing EBRM strategies. This work can also extend to broader rodent-management applications, including population estimation, behavioral analysis, and ecological monitoring.Funding: This work is part of MED4PEST, funded under the PRIMA Programme, an Art.185 initiative co-funded by Horizon-2020, the EU’s Research and Innovation Programme. Additional funding was provided by the General Secretariat for Research and Innovation, Greece; the Scientific and Technological Research Council of Turkey; the EU Horizon-2020 Research and Innovation Programme (grant No. 739578); and the Government of the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development.
- 19 April 2024
- Published by Springer Nature
- p. 531-545
The Be-Hive Project—Counting Bee Traffic Based on Deep Learning and Pose Estimation
- 19 April 2024
- Published by Springer Nature
- p. 531-545
The Be-Hive Project—Counting Bee Traffic Based on Deep Learning and Pose Estimation
- Open Access
- 28 December 2023
- Published by MDPI AG in Remote Sensing
- Vol. 16 (1) , 142
Scalable Retrieval of Similar Landscapes in Optical Satellite Imagery Using Unsupervised Representation Learning
Global Earth observation is becoming increasingly important in understanding and addressing critical aspects of life on our planet, including environmental issues, natural disasters, sustainable development, and others. Finding similarities in landscapes may provide useful information regarding applying contiguous policies, by making similar decisions or learning from best practices for events and occurrences that previously occurred in similar landscapes in the past. However, current applications of similar landscape retrieval are limited by a moderate performance and the need for time-consuming and costly annotations. We propose splitting the similar landscape retrieval task into a set of smaller tasks that aim to identify individual concepts inherent to satellite images. Our approach relies on several models trained using unsupervised representation learning on Google Earth images to identify these concepts. We show the efficacy of matching individual concepts for retrieving landscape(s) similar to a user-selected satellite image of the geographical territory of the Republic of Cyprus. Our results demonstrate the benefits of breaking up the landscape similarity task into individual concepts closely related to remote sensing, instead of applying a single model targeting all underlying concepts.
- 28 December 2023
- Published by MDPI AG in Remote Sensing
- Vol. 16 (1) , 142
Open AccessScalable Retrieval of Similar Landscapes in Optical Satellite Imagery Using Unsupervised Representation Learning
Global Earth observation is becoming increasingly important in understanding and addressing critical aspects of life on our planet, including environmental issues, natural disasters, sustainable development, and others. Finding similarities in landscapes may provide useful information regarding applying contiguous policies, by making similar decisions or learning from best practices for events and occurrences that previously occurred in similar landscapes in the past. However, current applications of similar landscape retrieval are limited by a moderate performance and the need for time-consuming and costly annotations. We propose splitting the similar landscape retrieval task into a set of smaller tasks that aim to identify individual concepts inherent to satellite images. Our approach relies on several models trained using unsupervised representation learning on Google Earth images to identify these concepts. We show the efficacy of matching individual concepts for retrieving landscape(s) similar to a user-selected satellite image of the geographical territory of the Republic of Cyprus. Our results demonstrate the benefits of breaking up the landscape similarity task into individual concepts closely related to remote sensing, instead of applying a single model targeting all underlying concepts.
- Open Access
- 25 October 2023
- Published by MDPI AG in Preprints.org
Scalable Retrieval of Similar Landscapes in Optical Satellite Imagery Using Unsupervised Representation Learning
Global Earth Observation (EO) is becoming increasingly important in understanding and addressing critical aspects of life on our planet about environmental issues, natural disasters, sustainable development and others. EO plays a key role in making informed decisions on applying or reforming land use, responding to disasters, shaping climate adaptation policies etc. EO is also becoming a useful tool for helping professionals make the most profitable decisions, e.g., in real estate or the investment sector. Finding similarities in landscapes may provide useful information regarding applying contiguous policies, taking alike decisions or learning from best practices on events and happenings that have already occurred in similar landscapes in the past. However, current applications of similar landscape retrieval are limited by moderate performance and the need for time-consuming and costly annotations. We propose splitting the similar landscape retrieval task into a set of smaller tasks that aim at identifying individual concepts inherent to satellite images. Our approach relies on several models trained with Unsupervised Representation Learning (URL) on Google Earth images to identify these concepts. We show the efficacy of matching individual concepts for tackling the task of retrieving similar landscape(s) to a user-selected satellite image with a proof-of-concept application of the proposed approach on the geographical territory of the Republic of Cyprus. Our results demonstrate the efficacy of breaking up the landscape similarity task into individual concepts closely related to remote sensing instead of trying to capture all concepts and image semantics with a single model like a single RGB semantics model.
- 25 October 2023
- Published by MDPI AG in Preprints.org
Open AccessScalable Retrieval of Similar Landscapes in Optical Satellite Imagery Using Unsupervised Representation Learning
Global Earth Observation (EO) is becoming increasingly important in understanding and addressing critical aspects of life on our planet about environmental issues, natural disasters, sustainable development and others. EO plays a key role in making informed decisions on applying or reforming land use, responding to disasters, shaping climate adaptation policies etc. EO is also becoming a useful tool for helping professionals make the most profitable decisions, e.g., in real estate or the investment sector. Finding similarities in landscapes may provide useful information regarding applying contiguous policies, taking alike decisions or learning from best practices on events and happenings that have already occurred in similar landscapes in the past. However, current applications of similar landscape retrieval are limited by moderate performance and the need for time-consuming and costly annotations. We propose splitting the similar landscape retrieval task into a set of smaller tasks that aim at identifying individual concepts inherent to satellite images. Our approach relies on several models trained with Unsupervised Representation Learning (URL) on Google Earth images to identify these concepts. We show the efficacy of matching individual concepts for tackling the task of retrieving similar landscape(s) to a user-selected satellite image with a proof-of-concept application of the proposed approach on the geographical territory of the Republic of Cyprus. Our results demonstrate the efficacy of breaking up the landscape similarity task into individual concepts closely related to remote sensing instead of trying to capture all concepts and image semantics with a single model like a single RGB semantics model.
- Open Access
- 18 January 2023
- Published by Elsevier in Fire Safety Journal
- Vol. 136
Examining the potential of mobile applications to assist people to escape wildfires in real-time
- 18 January 2023
- Published by Elsevier in Fire Safety Journal
- Vol. 136
Open AccessExamining the potential of mobile applications to assist people to escape wildfires in real-time
- Open Access
- 26 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-13
Exploiting Digital Surface Models for Inferring Super-Resolution for Remotely Sensed Images
Despite the plethora of successful super-resolution (SR) reconstruction (SRR) models applied to natural images, their application to remote sensing imagery tends to produce poor results. Remote sensing imagery is often more complicated than natural images, has its peculiarities such as being of lower resolution, contains noise, and often depicts large textured surfaces. As a result, applying nonspecialized SRR models like the enhanced SR generative adversarial network (ESRGAN) on remote sensing imagery results in artifacts and poor reconstructions. To address these problems, we propose a novel strategy for enabling an SRR model to output realistic remote sensing images: instead of relying on feature-space similarities as a perceptual loss, the model considers pixel-level information inferred from the normalized digital surface model (nDSM) of the image. This allows the application of better-informed updates during the training of the model which sources from a task (elevation map inference) that is closely related to remote sensing. Nonetheless, the nDSM auxiliary information is not required during production, i.e., the model infers an SR image without additional data. We assess our model on two remotely sensed datasets of different spatial resolutions that also contain the DSMs of the images: the Data Fusion 2018 Contest (DFC2018) dataset and the dataset containing the national LiDAR flyby of Luxembourg. We compare our model with ESRGAN, and we show that it achieves better performance and does not introduce any artifacts in the results. In particular, the results for the high-resolution DFC2018 dataset are realistic and almost indistinguishable from the ground-truth images.
- 26 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 60 (01962892) , 1-13
Open AccessExploiting Digital Surface Models for Inferring Super-Resolution for Remotely Sensed Images
Despite the plethora of successful super-resolution (SR) reconstruction (SRR) models applied to natural images, their application to remote sensing imagery tends to produce poor results. Remote sensing imagery is often more complicated than natural images, has its peculiarities such as being of lower resolution, contains noise, and often depicts large textured surfaces. As a result, applying nonspecialized SRR models like the enhanced SR generative adversarial network (ESRGAN) on remote sensing imagery results in artifacts and poor reconstructions. To address these problems, we propose a novel strategy for enabling an SRR model to output realistic remote sensing images: instead of relying on feature-space similarities as a perceptual loss, the model considers pixel-level information inferred from the normalized digital surface model (nDSM) of the image. This allows the application of better-informed updates during the training of the model which sources from a task (elevation map inference) that is closely related to remote sensing. Nonetheless, the nDSM auxiliary information is not required during production, i.e., the model infers an SR image without additional data. We assess our model on two remotely sensed datasets of different spatial resolutions that also contain the DSMs of the images: the Data Fusion 2018 Contest (DFC2018) dataset and the dataset containing the national LiDAR flyby of Luxembourg. We compare our model with ESRGAN, and we show that it achieves better performance and does not introduce any artifacts in the results. In particular, the results for the high-resolution DFC2018 dataset are realistic and almost indistinguishable from the ground-truth images.
- Open Access
Exploiting Digital Surface Models for Inferring Super-Resolution for Remotely Sensed Images
Despite the plethora of successful Super-Resolution Reconstruction (SRR) models applied to natural images, their application to remote sensing imagery tends to produce poor results. Remote sensing imagery is often more complicated than natural images and has its peculiarities such as being of lower resolution, it contains noise, and often depicting large textured surfaces. As a result, applying non-specialized SRR models on remote sensing imagery results in artifacts and poor reconstructions. To address these problems, this paper proposes an architecture inspired by previous research work, introducing a novel approach for forcing an SRR model to output realistic remote sensing images: instead of relying on feature-space similarities as a perceptual loss, the model considers pixel-level information inferred from the normalized Digital Surface Model (nDSM) of the image. This strategy allows the application of better-informed updates during the training of the model which sources from a task (elevation map inference) that is closely related to remote sensing. Nonetheless, the nDSM auxiliary information is not required during production and thus the model infers a super-resolution image without any additional data besides its low-resolution pairs. We assess our model on two remotely sensed datasets of different spatial resolutions that also contain the DSM pairs of the images: the DFC2018 dataset and the dataset containing the national Lidar fly-by of Luxembourg. Based on visual inspection, the inferred super-resolution images exhibit particularly superior quality. In particular, the results for the high-resolution DFC2018 dataset are realistic and almost indistinguishable from the ground truth images.
Open AccessExploiting Digital Surface Models for Inferring Super-Resolution for Remotely Sensed Images
Despite the plethora of successful Super-Resolution Reconstruction (SRR) models applied to natural images, their application to remote sensing imagery tends to produce poor results. Remote sensing imagery is often more complicated than natural images and has its peculiarities such as being of lower resolution, it contains noise, and often depicting large textured surfaces. As a result, applying non-specialized SRR models on remote sensing imagery results in artifacts and poor reconstructions. To address these problems, this paper proposes an architecture inspired by previous research work, introducing a novel approach for forcing an SRR model to output realistic remote sensing images: instead of relying on feature-space similarities as a perceptual loss, the model considers pixel-level information inferred from the normalized Digital Surface Model (nDSM) of the image. This strategy allows the application of better-informed updates during the training of the model which sources from a task (elevation map inference) that is closely related to remote sensing. Nonetheless, the nDSM auxiliary information is not required during production and thus the model infers a super-resolution image without any additional data besides its low-resolution pairs. We assess our model on two remotely sensed datasets of different spatial resolutions that also contain the DSM pairs of the images: the DFC2018 dataset and the dataset containing the national Lidar fly-by of Luxembourg. Based on visual inspection, the inferred super-resolution images exhibit particularly superior quality. In particular, the results for the high-resolution DFC2018 dataset are realistic and almost indistinguishable from the ground truth images.