Sinem Ozturk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sinem Ozturk has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Filiz Gurer Yucel
Music and Fine Arts University
1 shared publicationFurkan Terzioglu
Department of Mechanical Engineering, Faculty of Engineering, Istanbul University-Cerrahpasa, Istanbul, Turkey
1 shared publication- Furkan Terzioglu
Department of Mechanical Engineering, Faculty of Engineering, Istanbul University-Cerrahpasa, 34320 Istanbul, Türkiye
1 shared publication - Haluk Erol
Istanbul Technical University
1 shared publication Mehmet S. Ozer
Chair of Acoustics and Haptics, Dresden University of Technology, Dresden, Germany
1 shared publication- Mehmet Sait Özer
Faculty of Electrical and Computer Engineering Technische Universität Dresden Dresden Germany
1 shared publication
Latest Publications
- 7 November 2026
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (14) , 986
Locating the dominant aeroacoustic source of a motorcycle helmet and its effect on rider-side noise
- 7 November 2026
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 48 (14) , 986
Locating the dominant aeroacoustic source of a motorcycle helmet and its effect on rider-side noise
- 27 June 2026
- Published by Elsevier in International Journal of Engineering Science
- Vol. 227
A frequency-correlated vibro-acoustic model of a tembur
- 27 June 2026
- Published by Elsevier in International Journal of Engineering Science
- Vol. 227
A frequency-correlated vibro-acoustic model of a tembur
- 30 March 2026
- Published by Makina Muhendisleri Odasi (Chamber of Mechanical Engineering) in Mühendis ve Makina
- Vol. 67 (722) , 57-74
Urban Sound Mapping in Public Spaces of Istanbul: Sound Pressure Level Analysis in Kadıköy, Taksim, and Eminönü
Urban noise pollution is a significant public health and quality of life issue in large metropolises. This study analyzes the sound maps of three highly visited public spaces in Istanbul (Kadıköy, Taksim, and Eminönü) based on sound pressure level (SPL) measurements in order to reveal the spatial and temporal variations of urban sounds. While previous studies primarily focused on general noise measurements, this research examines environmental noise variations and dominant noise sources (e.g., vehicular traffic, pedestrian density, and public transportation) through field measurements taken at different times of the day. Peak noise levels frequently exceeded the recommended thresholds; deviations were particularly pronounced during peak hours, with significant differences observed among commercial, touristic, and transit-heavy areas. These results may provide urban planners and noise mitigation strategists with an evidence-based framework for managing public soundscapes. Future work aims to expand the dataset to additional locations and to examine the influence of subjective noise perception.
- 30 March 2026
- Published by Makina Muhendisleri Odasi (Chamber of Mechanical Engineering) in Mühendis ve Makina
- Vol. 67 (722) , 57-74
Urban Sound Mapping in Public Spaces of Istanbul: Sound Pressure Level Analysis in Kadıköy, Taksim, and Eminönü
Urban noise pollution is a significant public health and quality of life issue in large metropolises. This study analyzes the sound maps of three highly visited public spaces in Istanbul (Kadıköy, Taksim, and Eminönü) based on sound pressure level (SPL) measurements in order to reveal the spatial and temporal variations of urban sounds. While previous studies primarily focused on general noise measurements, this research examines environmental noise variations and dominant noise sources (e.g., vehicular traffic, pedestrian density, and public transportation) through field measurements taken at different times of the day. Peak noise levels frequently exceeded the recommended thresholds; deviations were particularly pronounced during peak hours, with significant differences observed among commercial, touristic, and transit-heavy areas. These results may provide urban planners and noise mitigation strategists with an evidence-based framework for managing public soundscapes. Future work aims to expand the dataset to additional locations and to examine the influence of subjective noise perception.
- 25 March 2026
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 41 (1) , 65-74
Transfer Matrisi Metodu ile Helmholtz Rezonatörlü Periyodik Akustik Metamalzeme Yapısının Sayısal Modellemesi
Bu çalışma, periyodik Helmholtz rezonatörlerinden oluşan bir akustik metamalzemenin ses yutma performansını sayısal olarak analiz etmektedir. Modelleme sürecinde transfer matrisi yöntemi (TMM) kullanılmış; visko-termal ve radyasyon kayıplarını içeren kapsamlı bir hesaplama çerçevesi geliştirilmiştir. MATLAB tabanlı model ile rezonatör hücre sayısı ve geometrik parametrelerin (özellikle boyun uzunluğu) yutum karakteristiğine etkisi incelenmiştir. Sonuçlar, hücre sayısının artmasının daha belirgin band-gap bölgeleri oluşturduğunu ve yutumun daha geniş bir frekans aralığında optimize edilebildiğini göstermiştir. Ayrıca boyun uzunluğundaki değişimin rezonans frekanslarını doğrudan etkilediği ve hedef frekanslara uyarlamada kritik olduğu belirlenmiştir. Son aşamada kayıpları temsil eden ölçek faktörleri (Rrad ve Rvis) otomatik optimize edilerek ilk band-gap genişliği maksimize edilmiştir. Bulgular, önerilen modelin deneysel çalışmaya gerek duymadan tasarım aşamasında metamalzeme yapıların akustik performansını değerlendirmek için etkili ve esnek bir araç sunduğunu göstermektedir.
- 25 March 2026
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 41 (1) , 65-74
Transfer Matrisi Metodu ile Helmholtz Rezonatörlü Periyodik Akustik Metamalzeme Yapısının Sayısal Modellemesi
Bu çalışma, periyodik Helmholtz rezonatörlerinden oluşan bir akustik metamalzemenin ses yutma performansını sayısal olarak analiz etmektedir. Modelleme sürecinde transfer matrisi yöntemi (TMM) kullanılmış; visko-termal ve radyasyon kayıplarını içeren kapsamlı bir hesaplama çerçevesi geliştirilmiştir. MATLAB tabanlı model ile rezonatör hücre sayısı ve geometrik parametrelerin (özellikle boyun uzunluğu) yutum karakteristiğine etkisi incelenmiştir. Sonuçlar, hücre sayısının artmasının daha belirgin band-gap bölgeleri oluşturduğunu ve yutumun daha geniş bir frekans aralığında optimize edilebildiğini göstermiştir. Ayrıca boyun uzunluğundaki değişimin rezonans frekanslarını doğrudan etkilediği ve hedef frekanslara uyarlamada kritik olduğu belirlenmiştir. Son aşamada kayıpları temsil eden ölçek faktörleri (Rrad ve Rvis) otomatik optimize edilerek ilk band-gap genişliği maksimize edilmiştir. Bulgular, önerilen modelin deneysel çalışmaya gerek duymadan tasarım aşamasında metamalzeme yapıların akustik performansını değerlendirmek için etkili ve esnek bir araç sunduğunu göstermektedir.
- Open Access
- 27 November 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 0455a1
Acoustical performance of additively manufactured metamaterials: sound absorption and transmission loss
Additive manufacturing facilitates the creation of complex acoustic metamaterial geometries that are unattainable through traditional processes. In this study, the sound-absorption and transmission-loss characteristics of three cylindrical architectures—a solid reference, a honeycomb lattice, and a Schwarz-P minimal-surface design—were assessed at fixed outer dimensions after fabrication by fused-deposition modelling in polylactic acid (PLA) and thermoplastic polyurethane (TPU). Normal-incidence absorption was measured in an impedance tube (ISO 10534-2), and transmission loss was measured using the four-microphone, two-load method (ASTM E2611) within the plane-wave band; a finite-element model implemented in COMSOL Multiphysics was used to interpret trends and enable like-for-like comparisons. The solid specimen exhibited high but narrowband absorption with limited insulation; the Schwarz-P provided broadband absorption with a nearly flat, moderate TL; and the honeycomb showed modest absorption, yet the highest broadband TL experimentally. These results indicate that internal topology and base polymer provide complementary control of bandwidth and magnitude at constant size, supporting rapid screening of geometry/material options for compact noise-control applications under normal incidence. Future work will extend the fixed-footprint matrix to graded or hybrid designs and targeted parametric variations, and will broaden the metrological scope beyond the tube band where appropriate.
- 27 November 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 0455a1
Open AccessAcoustical performance of additively manufactured metamaterials: sound absorption and transmission loss
Additive manufacturing facilitates the creation of complex acoustic metamaterial geometries that are unattainable through traditional processes. In this study, the sound-absorption and transmission-loss characteristics of three cylindrical architectures—a solid reference, a honeycomb lattice, and a Schwarz-P minimal-surface design—were assessed at fixed outer dimensions after fabrication by fused-deposition modelling in polylactic acid (PLA) and thermoplastic polyurethane (TPU). Normal-incidence absorption was measured in an impedance tube (ISO 10534-2), and transmission loss was measured using the four-microphone, two-load method (ASTM E2611) within the plane-wave band; a finite-element model implemented in COMSOL Multiphysics was used to interpret trends and enable like-for-like comparisons. The solid specimen exhibited high but narrowband absorption with limited insulation; the Schwarz-P provided broadband absorption with a nearly flat, moderate TL; and the honeycomb showed modest absorption, yet the highest broadband TL experimentally. These results indicate that internal topology and base polymer provide complementary control of bandwidth and magnitude at constant size, supporting rapid screening of geometry/material options for compact noise-control applications under normal incidence. Future work will extend the fixed-footprint matrix to graded or hybrid designs and targeted parametric variations, and will broaden the metrological scope beyond the tube band where appropriate.
- 15 July 2025
- Published by Elsevier in International Journal of Engineering Science
- Vol. 216
Experimental and numerical modal analysis of the traditional percussion instrument "Erbane"
- 15 July 2025
- Published by Elsevier in International Journal of Engineering Science
- Vol. 216
Experimental and numerical modal analysis of the traditional percussion instrument "Erbane"
- 1 February 2023
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 265 (3) , 4292-4299
The Sound Characteristics Of The Baglama With Respect To Different Chest Shapes
Baglama is the most common folk string instrument in Turkey. It has a bowl-shaped resonator box called a chest which amplifies the sound. The chest can be constructed in various forms by the luthiers. This study aims to determine the sound characteristics of the baglama associated with different chest forms. First, a prototypical baglama was modeled and analyzed numerically with the SolidWorks, HyperMesh and Actran software programs. Operational Deflection Shape (ODS) measurements of the baglama were also carried out experimentally. The numerical results were compared with the experimental ones and had an excellent agreement. Using this experimentally validated numerical model, the natural frequencies, mode shapes and sound propagation properties of the baglama were investigated for chests of different geometries.
- 1 February 2023
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 265 (3) , 4292-4299
The Sound Characteristics Of The Baglama With Respect To Different Chest Shapes
Baglama is the most common folk string instrument in Turkey. It has a bowl-shaped resonator box called a chest which amplifies the sound. The chest can be constructed in various forms by the luthiers. This study aims to determine the sound characteristics of the baglama associated with different chest forms. First, a prototypical baglama was modeled and analyzed numerically with the SolidWorks, HyperMesh and Actran software programs. Operational Deflection Shape (ODS) measurements of the baglama were also carried out experimentally. The numerical results were compared with the experimental ones and had an excellent agreement. Using this experimentally validated numerical model, the natural frequencies, mode shapes and sound propagation properties of the baglama were investigated for chests of different geometries.
- 1 February 2023
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 265 (3) , 4205-4213
Experimental and numerical modal analysis of the Turkish traditional instrument 'Bendir'
This study carried out an experimental and numerical modal analysis of the Turkish traditional instrument 'Bendir' by an acoustical excitation source. In experimental modal analysis, Bendir was excited acoustically for specified frequencies and elastic deformations of different areas of Bendir due to the excitation were observed with a laser vibrometer. Using the Fourier series handled gained data, modal analysis was done. The first six natural frequencies obtained experimentally and numerically were compared. In addition, other hits in Bendir, symbolizing three fundamental voices such as 'dum', 'te', 'ke' were used to excite the instrument. As a result, time dependent deformation & velocity data were determined and different responses of Bendir were compared.
- 1 February 2023
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 265 (3) , 4205-4213
Experimental and numerical modal analysis of the Turkish traditional instrument 'Bendir'
This study carried out an experimental and numerical modal analysis of the Turkish traditional instrument 'Bendir' by an acoustical excitation source. In experimental modal analysis, Bendir was excited acoustically for specified frequencies and elastic deformations of different areas of Bendir due to the excitation were observed with a laser vibrometer. Using the Fourier series handled gained data, modal analysis was done. The first six natural frequencies obtained experimentally and numerically were compared. In addition, other hits in Bendir, symbolizing three fundamental voices such as 'dum', 'te', 'ke' were used to excite the instrument. As a result, time dependent deformation & velocity data were determined and different responses of Bendir were compared.
- 23 August 2021
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 40 (4) , 465-474
Multi-objective optimization of a diesel particulate filter: an acoustic approach
In order to decrease the soot particles’ harmful emission, it is necessary to use a diesel particulate filter (DPF) on cars. Recent years, many countries standardize using DPF on cars. In this paper, a multi-objective design optimization study is performed by using the nondominated sorting genetic algorithm (NSGA-II) to obtain an optimum DPF geometry. In the present study, two objective functions were determined to obtain an optimum DPF. The first was to maximize sound transmission loss (TL) values to increase the acoustical properties of the DPF, while the second was to minimize the back pressure to cause the diesel engine to work efficiently and consume less energy. The optimization problem has been constructed in the form of maximizing the sum of the values of TL at all frequencies, as optimizing the problem for each frequency separately means a new DPF at each frequency, which has a different geometry. In the literature, optimization of the DPF has been carried out for a few parameters by just changing one parameter value and keeping others stable. However, in this paper, optimization of the acoustic performance of DPFs was performed for more than one parameter in the range of their specific values simultaneously.
- 23 August 2021
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 40 (4) , 465-474
Multi-objective optimization of a diesel particulate filter: an acoustic approach
In order to decrease the soot particles’ harmful emission, it is necessary to use a diesel particulate filter (DPF) on cars. Recent years, many countries standardize using DPF on cars. In this paper, a multi-objective design optimization study is performed by using the nondominated sorting genetic algorithm (NSGA-II) to obtain an optimum DPF geometry. In the present study, two objective functions were determined to obtain an optimum DPF. The first was to maximize sound transmission loss (TL) values to increase the acoustical properties of the DPF, while the second was to minimize the back pressure to cause the diesel engine to work efficiently and consume less energy. The optimization problem has been constructed in the form of maximizing the sum of the values of TL at all frequencies, as optimizing the problem for each frequency separately means a new DPF at each frequency, which has a different geometry. In the literature, optimization of the DPF has been carried out for a few parameters by just changing one parameter value and keeping others stable. However, in this paper, optimization of the acoustic performance of DPFs was performed for more than one parameter in the range of their specific values simultaneously.
- Open Access
- 31 October 2019
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 8 (3) , 125-133
Experimental evaluation on noise reduction performance of a motorcycle helmet
Motorcycle helmets are generally thought to be only protection of motorcycle drivers against head injuries as well as loud noise in traffic. While there have been several papers on noise elimination capabilities of motorcycle helmets, no controlled study has been reported to compare different types of test conditions in literature. The purpose of this study is to assess noise reduction capacities of a motorcycle helmet under different types of acoustical loadings as well as environments and to identify better test condition. Firstly, a Head & Torso simulator with and without the motorcycle helmet in a built acoustical cabinet was exposed to digitally generated sound to investigate insertion loss values. Besides, the Head & Torso simulator was fixed onto a motorcycle to simulate actual driving conditions. Sound pressure levels were captured at the ear level to obtain insertion loss values in case of motorcycle noise for different engine speeds. By comparing calculated insertion losses, it was revealed that considerable differences existed between tests for different conditions. Beneficial interpretations were deduced and thus, a practical solution was presented for accurate measurements acoustic performance of the motorcycle helmets in laboratory conditions.
- 31 October 2019
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 8 (3) , 125-133
Open AccessExperimental evaluation on noise reduction performance of a motorcycle helmet
Motorcycle helmets are generally thought to be only protection of motorcycle drivers against head injuries as well as loud noise in traffic. While there have been several papers on noise elimination capabilities of motorcycle helmets, no controlled study has been reported to compare different types of test conditions in literature. The purpose of this study is to assess noise reduction capacities of a motorcycle helmet under different types of acoustical loadings as well as environments and to identify better test condition. Firstly, a Head & Torso simulator with and without the motorcycle helmet in a built acoustical cabinet was exposed to digitally generated sound to investigate insertion loss values. Besides, the Head & Torso simulator was fixed onto a motorcycle to simulate actual driving conditions. Sound pressure levels were captured at the ear level to obtain insertion loss values in case of motorcycle noise for different engine speeds. By comparing calculated insertion losses, it was revealed that considerable differences existed between tests for different conditions. Beneficial interpretations were deduced and thus, a practical solution was presented for accurate measurements acoustic performance of the motorcycle helmets in laboratory conditions.