Matthew Humbert
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthew Humbert has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Akbar Rhamdhani
Swinburne University of Technology
5 shared publications Chad Hargrave
CSIRO Sustainable Mining Technologies
4 shared publications- Alan R. Duffy
Centre for Astrophysics and Supercomputing, Swinburne University of Technology , PO Box 218, Hawthorn VIC 3122
3 shared publications - Geoffrey Brooks
Swinburne University of Technology
3 shared publications - Matthew Shaw
Future Mining Team, Commonwealth Scientific and Industrial Research Organisation, Mineral Resources
3 shared publications Alan Duffy
Swinburne University of Technology
2 shared publications
Latest Publications
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (67) , 3240
Closing the Isru Loop: Clinostat-Based Modeling of Long-Duration Molten Oxide Electrolysis
Oxide electrolysis represents a critical technology for in-situ resource utilization in space, enabling the production of vital oxygen and metals from extraterrestrial minerals. In reduced-gravity environments, oxygen bubbles accumulate on the anode surface, creating an electrically insulating layer that increases cell resistance, compromising efficiency and increasing power consumption—critical limitations for space operations. Understanding long-duration electrolysis behavior in low gravity remains challenging, as current experimental platforms only provide brief microgravity periods: 20-25 seconds during parabolic flights or up to 12 minutes on sounding rockets. These timeframes are insufficient for cell resistance to reach steady state, preventing the development of comprehensive bubble dynamics models for extended operations. This work introduces a novel approach using a two-axis clinostat (random positioning machine, RPM) to simulate reduced-gravity electrolysis for extended periods of minutes to hours, providing cost-effective access to comprehensive data required for robust model development. We present a custom-designed RPM motion algorithm and investigate electrolysis behavior in potassium hydroxide solutions with glycerol-modified viscosities ranging from 1 cP (water-like) to over 100 cP (comparable to molten minerals). Notably, the expected correlation between reduced gravity and increased cell resistance was observed consistently only in the highest viscosity solution (173 cP). Lower-viscosity electrolytes showed minimal gravity effects, likely due to inertial forces dislodging bubbles during RPM directional changes. These results suggest two critical engineering priorities for future ground-based simulations: (1) optimizing acceleration/deceleration profiles to minimize artificial bubble detachment during RPM directional changes, and (2) increasing RPM angular velocity to achieve effective viscosity scaling for aqueous electrolytes (1-10 cP range). Implementing these operational adjustments could extend clinostat simulation capabilities to relevant fluids while improving oxygen bubble behavior fidelity – essential steps toward designing reliable electrolysis systems for lunar/Martian oxygen production and metal refining. Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (67) , 3240
Closing the Isru Loop: Clinostat-Based Modeling of Long-Duration Molten Oxide Electrolysis
Oxide electrolysis represents a critical technology for in-situ resource utilization in space, enabling the production of vital oxygen and metals from extraterrestrial minerals. In reduced-gravity environments, oxygen bubbles accumulate on the anode surface, creating an electrically insulating layer that increases cell resistance, compromising efficiency and increasing power consumption—critical limitations for space operations. Understanding long-duration electrolysis behavior in low gravity remains challenging, as current experimental platforms only provide brief microgravity periods: 20-25 seconds during parabolic flights or up to 12 minutes on sounding rockets. These timeframes are insufficient for cell resistance to reach steady state, preventing the development of comprehensive bubble dynamics models for extended operations. This work introduces a novel approach using a two-axis clinostat (random positioning machine, RPM) to simulate reduced-gravity electrolysis for extended periods of minutes to hours, providing cost-effective access to comprehensive data required for robust model development. We present a custom-designed RPM motion algorithm and investigate electrolysis behavior in potassium hydroxide solutions with glycerol-modified viscosities ranging from 1 cP (water-like) to over 100 cP (comparable to molten minerals). Notably, the expected correlation between reduced gravity and increased cell resistance was observed consistently only in the highest viscosity solution (173 cP). Lower-viscosity electrolytes showed minimal gravity effects, likely due to inertial forces dislodging bubbles during RPM directional changes. These results suggest two critical engineering priorities for future ground-based simulations: (1) optimizing acceleration/deceleration profiles to minimize artificial bubble detachment during RPM directional changes, and (2) increasing RPM angular velocity to achieve effective viscosity scaling for aqueous electrolytes (1-10 cP range). Implementing these operational adjustments could extend clinostat simulation capabilities to relevant fluids while improving oxygen bubble behavior fidelity – essential steps toward designing reliable electrolysis systems for lunar/Martian oxygen production and metal refining. Figure 1
- Open Access
- 5 August 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (3) , 1679-1701
Economics of Electrowinning Iron from Ore for Green Steel Production
The transition to green steel production is pivotal for reducing global carbon emissions. This study presents a comprehensive techno-economic analysis of various green steel production methods, including hydrogen reduction and three different electrolysis techniques: aqueous hydroxide electrolysis (AHE), molten salt electrolysis, and molten oxide electrolysis (MOE). By comparing process flow diagrams, capital and operational expenditures, specific energy consumption, and production footprint, this work provides a high-level assessment of the economic viability of these processes as they mature. The analysis reveals that MOE, despite its ongoing development, offers a promising route for iron production given its ability to process a wide range of ore qualities and the potential to sell electrolyte as a cement product. However, the best balance between deployment ready technology and economic benefit is AHE. Operational challenges are also discussed, such as electrolyte loss and slag handling. We suggest that the sale of by-products like oxygen may not significantly impact the economics due to market saturation. The findings underscore the importance of continued research and development in process optimization to realize the full potential of green steel technologies. All the calculations have been released as supplementary electronic material (MS Excel workbook). The format has been inspired by the techno-economic assessment template (TECHTEST) distributed by the US Dept. of Energy. Graphical Abstract
- 5 August 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (3) , 1679-1701
Open AccessEconomics of Electrowinning Iron from Ore for Green Steel Production
The transition to green steel production is pivotal for reducing global carbon emissions. This study presents a comprehensive techno-economic analysis of various green steel production methods, including hydrogen reduction and three different electrolysis techniques: aqueous hydroxide electrolysis (AHE), molten salt electrolysis, and molten oxide electrolysis (MOE). By comparing process flow diagrams, capital and operational expenditures, specific energy consumption, and production footprint, this work provides a high-level assessment of the economic viability of these processes as they mature. The analysis reveals that MOE, despite its ongoing development, offers a promising route for iron production given its ability to process a wide range of ore qualities and the potential to sell electrolyte as a cement product. However, the best balance between deployment ready technology and economic benefit is AHE. Operational challenges are also discussed, such as electrolyte loss and slag handling. We suggest that the sale of by-products like oxygen may not significantly impact the economics due to market saturation. The findings underscore the importance of continued research and development in process optimization to realize the full potential of green steel technologies. All the calculations have been released as supplementary electronic material (MS Excel workbook). The format has been inspired by the techno-economic assessment template (TECHTEST) distributed by the US Dept. of Energy. Graphical Abstract
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (56) , 2741
(Invited) Bubble Trouble: Simulation of Molten Oxide Electrolysis in Reduced Gravity
Molten Oxide Electrolysis (MOE) is a leading contender for processing extra-terrestrial minerals because it produces oxygen and liquid metal without the use of consumables. During electrolysis a gravitational field stratifies gas, electrolyte, and metal from each other by density. Processing on the moon, with ~1/6g, or Mars, with ~1/3g, will reduce the buoyancy force slowing bubble velocity and lowering convection intensity. Low thermal conductivity, (~1Wm-1K-1) and high viscosity, (~1Pa⋅s) of molten regolith contribute to thermal and chemical transport being dominated by convection, even as convection velocity decreases. We explore MOE system dynamics in Earth’s (1g), Mars’ (1/3g), and the Moon’s (1/6g) gravity through simulations that include composition and temperature dependent material properties and two phase flow. We implement the level set method to track the interface between the bubble laden flow near the anode and the bubble free flow far from the anode. By grouping bubble dynamics into the material properties of the fluid near the anode we relax the requirements for a fine mesh to track individual bubble-fluid interfaces, and are able to use a mesh that is finer than that required for a bubbly flow mixture model. Thus, all physics can be captured on one mesh. This is particularly relevant because bubble sizes for proposed systems are 1/10 to 1/100 of the system scale. While other simulations have been presented and experiments performed in micro and zero gravity for gas evolving electrolysis systems, none have investigated the downward facing electrode, heat transfer, or species diffusion. The focus of this work is to address this gap in the literature through simulation. Here, multiphysics simulation is supported by inspection of dimensionless groups and observations from other electrolysis systems. This work demonstrates that combining heat and mass transfer with temperature and composition dependent material properties is critical to designing MOE and other electrolysis systems for earth and beyond.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (56) , 2741
(Invited) Bubble Trouble: Simulation of Molten Oxide Electrolysis in Reduced Gravity
Molten Oxide Electrolysis (MOE) is a leading contender for processing extra-terrestrial minerals because it produces oxygen and liquid metal without the use of consumables. During electrolysis a gravitational field stratifies gas, electrolyte, and metal from each other by density. Processing on the moon, with ~1/6g, or Mars, with ~1/3g, will reduce the buoyancy force slowing bubble velocity and lowering convection intensity. Low thermal conductivity, (~1Wm-1K-1) and high viscosity, (~1Pa⋅s) of molten regolith contribute to thermal and chemical transport being dominated by convection, even as convection velocity decreases. We explore MOE system dynamics in Earth’s (1g), Mars’ (1/3g), and the Moon’s (1/6g) gravity through simulations that include composition and temperature dependent material properties and two phase flow. We implement the level set method to track the interface between the bubble laden flow near the anode and the bubble free flow far from the anode. By grouping bubble dynamics into the material properties of the fluid near the anode we relax the requirements for a fine mesh to track individual bubble-fluid interfaces, and are able to use a mesh that is finer than that required for a bubbly flow mixture model. Thus, all physics can be captured on one mesh. This is particularly relevant because bubble sizes for proposed systems are 1/10 to 1/100 of the system scale. While other simulations have been presented and experiments performed in micro and zero gravity for gas evolving electrolysis systems, none have investigated the downward facing electrode, heat transfer, or species diffusion. The focus of this work is to address this gap in the literature through simulation. Here, multiphysics simulation is supported by inspection of dimensionless groups and observations from other electrolysis systems. This work demonstrates that combining heat and mass transfer with temperature and composition dependent material properties is critical to designing MOE and other electrolysis systems for earth and beyond.
- Open Access
Metal and Oxide Sublimation from Lunar Regolith: A Kinetics Study
When considering the extraction of metals from lunar regolith for use in space, one reductive method of interest is vacuum thermal dissociation. Given the high vacuum environment on the Moon, the sub-liquidus operation of such a process, i.e., sublimation, warrants investigation. In the current work, the kinetics of the vacuum sublimation of the more volatile major oxides found in the lunar regolith, Na2O, K2O, and FeO, are evaluated. Two distinct factors are accounted for in the current work: the change in the evaporation flux due to temperature; and the reduction in available surface area for evaporation due to sintering of the feedstock. Surface area change due to the sintering of compressed LMS-1 regolith simulant pellets was quantified via a Brunauer–Emmett–Teller analysis. The surface area of the samples was measured to vary from 3.29 m2/g in the unsintered sample, to 1.04 m2/g in the samples sintered at 800 °C, and down to 0.09 m2/g in the sample sintered at 1150 °C. Evaporation flux was calculated using the Hertz–Knudsen–Langmuir equation using saturated vapor pressures predicted from the FactSage thermochemical package and verified against Knudsen Effusion Mass Spectroscopy data from tests conducted on lunar regolith sample #12022. The combination of these studies resulted in the conclusion that no local maxima in evaporation rate below the melting point was found for the current system, as such the highest rate of sublimation was determined to be 1200 °C for all species, at temperatures of 1200 °C and above, partial melting of the material occurs. The predicted maximum rate of sublimation for the species Fe, Na, and K at 1200 °C was 0.08, 1.38, and 1.02 g/h/g of regolith, respectively. It is noted that significant variation was seen between FactSage predictions of saturated vapor pressures and the measured values. Future work generating detailed thermochemical databases to predict the behavior of complex systems similar in composition to lunar regolith would benefit the accuracy of similar kinetic studies in the future.
Open AccessMetal and Oxide Sublimation from Lunar Regolith: A Kinetics Study
When considering the extraction of metals from lunar regolith for use in space, one reductive method of interest is vacuum thermal dissociation. Given the high vacuum environment on the Moon, the sub-liquidus operation of such a process, i.e., sublimation, warrants investigation. In the current work, the kinetics of the vacuum sublimation of the more volatile major oxides found in the lunar regolith, Na2O, K2O, and FeO, are evaluated. Two distinct factors are accounted for in the current work: the change in the evaporation flux due to temperature; and the reduction in available surface area for evaporation due to sintering of the feedstock. Surface area change due to the sintering of compressed LMS-1 regolith simulant pellets was quantified via a Brunauer–Emmett–Teller analysis. The surface area of the samples was measured to vary from 3.29 m2/g in the unsintered sample, to 1.04 m2/g in the samples sintered at 800 °C, and down to 0.09 m2/g in the sample sintered at 1150 °C. Evaporation flux was calculated using the Hertz–Knudsen–Langmuir equation using saturated vapor pressures predicted from the FactSage thermochemical package and verified against Knudsen Effusion Mass Spectroscopy data from tests conducted on lunar regolith sample #12022. The combination of these studies resulted in the conclusion that no local maxima in evaporation rate below the melting point was found for the current system, as such the highest rate of sublimation was determined to be 1200 °C for all species, at temperatures of 1200 °C and above, partial melting of the material occurs. The predicted maximum rate of sublimation for the species Fe, Na, and K at 1200 °C was 0.08, 1.38, and 1.02 g/h/g of regolith, respectively. It is noted that significant variation was seen between FactSage predictions of saturated vapor pressures and the measured values. Future work generating detailed thermochemical databases to predict the behavior of complex systems similar in composition to lunar regolith would benefit the accuracy of similar kinetic studies in the future.
- 9 July 2022
- Published by Elsevier in Acta Astronautica
- Vol. 198, 564-576
Metals extraction on Mars through carbothermic reduction
- 9 July 2022
- Published by Elsevier in Acta Astronautica
- Vol. 198, 564-576
Metals extraction on Mars through carbothermic reduction
- 25 June 2022
- Published by Elsevier in Planetary and Space Science
- Vol. 219
Thermophysical property evolution during molten regolith electrolysis
- 25 June 2022
- Published by Elsevier in Planetary and Space Science
- Vol. 219
Thermophysical property evolution during molten regolith electrolysis
- 31 August 2021
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 43 (7) , 865-891
Mineral Processing and Metal Extraction on the Lunar Surface - Challenges and Opportunities
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper, we review the metals available for extraction and conditions at the lunar surface, and analyze the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the natural lunar conditions are also evaluated. This investigation concludes that process plant design on the lunar surface will favor lightweight, schematically simple flow sheets that enable automation, and that utilize the local environment wherever possible. The elimination of traditional comminution and beneficiation stages and their replacement with basic classification could be economically favorable. The most promising metal reduction pathways are identified as molten regolith electrolysis, and vacuum thermal dissociation, other processes with merit are hydrogen reduction, carbothermal reduction, and solid electrolysis. Finally, it is identified that a significant research effort in all areas of astrometallurgy will be required before industrial-sized extra-terrestrial mineral processing and metal extraction operations will be viable.
- 31 August 2021
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 43 (7) , 865-891
Mineral Processing and Metal Extraction on the Lunar Surface - Challenges and Opportunities
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper, we review the metals available for extraction and conditions at the lunar surface, and analyze the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the natural lunar conditions are also evaluated. This investigation concludes that process plant design on the lunar surface will favor lightweight, schematically simple flow sheets that enable automation, and that utilize the local environment wherever possible. The elimination of traditional comminution and beneficiation stages and their replacement with basic classification could be economically favorable. The most promising metal reduction pathways are identified as molten regolith electrolysis, and vacuum thermal dissociation, other processes with merit are hydrogen reduction, carbothermal reduction, and solid electrolysis. Finally, it is identified that a significant research effort in all areas of astrometallurgy will be required before industrial-sized extra-terrestrial mineral processing and metal extraction operations will be viable.