MMMashrafi Bin Mobarak

Mashrafi Bin Mobarak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mashrafi Bin Mobarak has a total of 73 co-authors. Here are the top co-authors by number of shared publications:

  • Samina Ahmed

    Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka 1205, Bangladesh

    19 shared publications
  • Sahadat Hossain

    Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka 1205, Bangladesh

    15 shared publications
  • Fariha Chowdhury

    Biomedical and Toxicological Research Institute (BTRI), Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka-1205, Bangladesh

    11 shared publications
  • Nazmul Islam Tanvir

    BCSIR Dhaka Laboratories

    10 shared publications
  • Md Sohag Hossain

    Institute of Glass and Ceramic Research and Testing (IGCRT), Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka-1205, Bangladesh

    9 shared publications
  • Umme Sarmeen Akhtar

    Institute of Glass and Ceramic Research and Testing (IGCRT), Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka-1205, Bangladesh

    9 shared publications

Latest Publications

  • Precursor-Driven Engineering of g-C3N4/TiO2 Heterojunctions: Influence on Structure, Optical Properties, and Photocatalytic Performance

    by Maliha Tasnim Kabir, Rudra Kumar Sarker, Fariha Chowdhury, Shahran Ahmed, Md. Nakib Hossen, Shah Md. Masum, Samina Ahmed, Md. Ashraful Islam Molla, Mashrafi Bin Mobarak

    The precursors that are used to synthesize graphitic carbon nitride (g-C3N4) strongly influence its physicochemical properties. However, their effect on the performance of g-C3N4/TiO2 heterojunctions has received limited attention. In this work, g-C3N4 was synthesized from three commonly used precursors and combined with hydrothermally prepared TiO2 to fabricate MGCN/TiO2 (melamine), UGCN/TiO2 (urea), and TGCN/TiO2 (thiourea) composites under identical conditions. Structural characterization confirmed the coexistence of the constituent phases, while UV–vis diffuse reflectance spectroscopy revealed precursor-dependent optical characteristics and dual absorption transitions in the composites. Zeta potential measurements established the point of zero charge (pHpzc) of 4.28, 4.53, and 5.56 for MGCN/TiO2, UGCN/TiO2, and TGCN/TiO2, respectively. Photoluminescence (PL) analysis revealed the highest emission intensity for MGCN/TiO2 and the lowest for UGCN/TiO2; however, these differences were not interpreted as direct measures of interfacial charge-separation efficiency. The photocatalytic activities of the composites were evaluated through Congo Red (CR) dye degradation under UV irradiation. Among the three composites, TGCN/TiO2 exhibited the best performance, achieving 89.86% removal at 0.50 g/L and pH 9, with an apparent pseudo-first-order rate constant of 8.43 × 10–3 min–1. Radical scavenging experiments showed that superoxide radicals are the dominant reactive species, with hydroxyl radicals and photogenerated holes making additional contributions. The scavenger results and band-edge potentials estimated using the Mulliken electronegativity approach are compatible with a possible S-scheme-type charge-transfer model. These results demonstrate that precursor selection for g-C3N4 is a crucial step, as it affects the structural, optical, and photocatalytic characteristics of g-C3N4/TiO2 heterojunctions.

  • Open Access

    Bridging bioceramics and advanced 2D/porous materials: a review of hydroxyapatite/metal–organic framework and hydroxyapatite/MXene composites

    by Mashrafi Bin Mobarak, Md. Rashidul Islam, Aima Tanjim Khan, Fatema Nowsin, Sharita Saha, Fariha Chowdhury

    Integration of hydroxyapatite with MOFs and MXenes synergistically enhances their properties for superior performance in multifunctional applications.

  • Phase variations in waste-derived CaSiO 3 for efficient drug loading, releasing, and antimicrobial applications

    by Sumaya Tabassum, Mashrafi Bin Mobarak, Farid Ahmed, Najem Uddin, Muhammad Shahriar Bashar, Umme Sarmeen Akhtar, Shirin Akter Jahan, Samina Ahmed, Sahadat Hossain

    Calcium silicate is a bioactive material that enhances bone regeneration in compromised osteogenesis. Calcium silicate biomaterials were synthesized through a solid-state method (1000 °C) using SiO2 and eggshell-derived CaCO3 in varying ratios (2 : 1, 2 : 1.5, 2 : 2, and 2 : 3) as a source of Si and Ca, respectively. The samples were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and UV–visible spectrophotometry. Five phases (wollastonite, di-calcium silicate, larnite, rankinite, and calcium silicate hydroxide) of calcium silicate were confirmed by Rietveld refinement analysis. The powdered sample was shaped into a round pellet. It was sintered at 900 °C (four-stage temperature) to evaluate the antibiotic (ciprofloxacin, amoxicillin, and levofloxacin) loading and release profiles in simulated body fluid at different chosen time intervals for 21 days. The maximum drug loading (ciprofloxacin-loaded) and release were observed for the calcium silicate (2_SiO2 : 1_CaCO3) sample (crystallite size, 100.7130 nm) compared to the other three compositions (2 : 1.5, 2 : 2, and 2 : 3) due to the presence of the wollastonite and di-calcium silicate phases. The samples (drug-loaded, drug-released, and SBF-soaked) were examined using a field emission scanning electron microscope (FESEM), and their antimicrobial activity against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria was assessed; they presented larger inhibition zones than the standard against the two types of microbes.

  • Phyto-Functionalization of Seashell-Derived Hydroxyapatite: Influence of Extract-Assisted Synthesis Strategy on Ciprofloxacin Adsorption

    by Mashrafi Bin Mobarak, Rabiul Islam, Sohag Hossain, Umme Toufika Jannat, Avoy Kanti Mondal, Saiful Quddus, Monira Binte Mesbah, Nazmul Islam Tanvir, Fariha Chowdhury, Anamul Haque, et al.

    Phyto-functionalization offers a greener route to introduce surface functionality on inorganic materials instead of relying on synthetic organic modifiers. While green synthesis is widely reported, the influence of synthesis sequence on material properties remains underexplored. In this study, Vasticardium flavum seashell waste-derived hydroxyapatite (HAp) was functionalized with Lagerstroemia speciosa leaf extract using two approaches: leaf extract addition before (B-HAp) and after (A-HAp) HAp precursor mixing. A pure HAp sample produced from analytical-grade CaCO3 (P-HAp) was used as the control. Both functionalized samples showed improved adsorption of ciprofloxacin compared to P-HAp. B-HAp exhibited the highest adsorption capacity (28.80 mg g−1), followed by A-HAp (18.65 mg g−1), while P-HAp showed the lowest value (7.56 mg g−1). The superior performance of B-HAp is attributed to structural changes introduced when the extract was added before H3PO4 addition. Early interaction between extract molecules and Ca2+ limited crystal growth, producing smaller crystallites (5.01 nm) and reduced particle size (21 ± 11 nm). This also produced a much larger specific surface area (182.93 m2 g−1) compared to A-HAp (77.19 m2 g−1) and P-HAp (77.17 m2 g−1). Statistical analysis of the adsorption data, utilizing goodness-of-fit parameters (R2) and error functions, confirmed the validity of the experimental findings. These results show that green functionalization before Ca and P precursor mixing can tune the physicochemical properties of HAp and enhance its adsorption behavior. This simple approach provides a sustainable alternative to chemical surface modifiers.


  • Sustainable Nano-Hydroxyapatite from Eggshell Waste for pH-Responsive Doxycycline Delivery: In Situ Loading, Biphasic Release Kinetics, and Enhanced Antibacterial Activity against Pathogens

    by Mashrafi Bin Mobarak, Sohag Hossain, Sumaya Tabassum, Najem Uddin, Sahadat Hossain, Nazmul Islam Tanvir, Fariha Chowdhury, Samina Ahmed

    In this study, we prepared nano-hydroxyapatite (nHAp) from waste chicken eggshells using a wet chemical method and loaded it in situ with doxycycline hyclate (DOXh) at concentrations of 5, 10, and 15 mg/mL. X-ray diffractometry (XRD) confirmed the formation of the nHAp phase and demonstrated that its structural integrity was maintained after drug loading. The crystallite size of pure nHAp was 5.33 nm, which varied with different DOXh concentrations. FTIR and Raman spectroscopy confirmed the presence of HAp functional groups, although the Raman peaks were masked following DOXh loading. Field emission scanning electron microscopy (FESEM) revealed rod-like particles of sizes within 32–34 nm, and energy dispersive X-ray Spectroscopy (EDX) identified elements associated with DOXh in the loaded samples. The loading study indicated that the entrapment efficiency (EE%) exceeded 99% for all DOXh concentrations, with both drug loading capacity (DLC) and adsorption capacity (Qe) increasing proportionally. Density functional theory (DFT) analysis indicated strong binding between nHAp and DOXh via electrostatic and hydrogen bonds. In vitro drug release studies in simulated body fluid at pH levels of 3, 5, and 7.4 demonstrated that acidic conditions facilitated enhanced drug release, showcasing pH-responsive behavior. The release profile showed an initial burst followed by a slower diffusion-controlled phase. The highest cumulative release reached 46.74% for the 10 mg/mL DOXh-loaded sample at pH 3 after two weeks. The release patterns followed the Higuchi and Ritger–Peppas models, suggesting a Fickian diffusion mechanism. Antibacterial tests against Staphylococcus aureus and Escherichia coli revealed strong inhibition, with a maximum zone of inhibition of 32.24 mm against E. coli for the 15 mg/mL DOXh-loaded nHAp, surpassing that of kanamycin. These findings suggest that nHAp-DOXh formulations could serve as efficient, pH-sensitive carriers for targeted drug delivery at infection sites.


  • Open Access

    Sustainable synthesis of biocompatible nano-hydroxyapatite from seashell (micro-mollusk) waste

    by Mashrafi Bin Mobarak, Md Sohag Hossain, Aima Tanjim Khan, Fariha Chowdhury, Samina Ahmed

    Herein, we report a simple and sustainable wet chemical synthesis of nano-hydroxyapatite (nHAp) from micro-mollusk (seashell) waste collected from Saint Martin's Island, Bangladesh. The collected micro-mollusk contained around 96.7% of CaO measured by Wavelength Dispersive X-ray Fluorescence (WDXRF) spectroscopy. X-ray Diffraction (XRD) pattern of the synthesized nHAp matched with the ICDD standard data and confirmed the hexagonal HAp with nanocrystalline peaks. Crystallite size was estimated by exploiting multiple methods where the size ranged from around 2.6–16.5 nm. The nano-sized nature along with the morphology was confirmed through Field Emission Scanning Electron Microscope (FESEM) and Transmission Electron Microscope (TEM) analysis, where the particle sizes were measured to be 32.11 ± 11.38 nm (N = 105) and 14.95 ± 5.37 nm (N = 33), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy were employed to confirm the existing functional groups, primarily the vibrational modes of PO4 3− groups. They also confirmed the presence of B-type carbonate substitution of the synthesized nHAp. X-ray Photoelectron Spectroscopy (XPS) analysis was carried out to confirm the surface elemental composition (Ca, P, O and C), along with Na which was not detected in EDX analysis. Simultaneous Thermal Analysis (STA) indicated a total mass loss of 7.7% up to 597.5 °C and high thermal stability. The specific surface area was measured to be 72.98 m2 g−1 by Brunauer–Emmett–Teller sorptometer (BET) analysis. The in vitro cell viability assay showed >95% cell viability at 100 µg mL−1. The results demonstrate the successful synthesis of nHAp by utilizing micro-mollusk waste, which is biocompatible and suitable for biomedical and environmental applications.


  • Open Access

    From discarded to desired: valorization of Zn–C battery waste into crystalline ZnO nanoparticles with crystallographic insights and antibacterial efficacy

    by Mashrafi Bin Mobarak, Md Sohag Hossain, Fariha Chowdhury, Nourin Tarannum, Monira Binte Mesbah, Nazmul Islam Tanvir, Umme Sarmeen Akhtar, Samina Ahmed

    This study presents a sustainable “waste-to-wealth” approach for synthesizing zinc oxide nanoparticles (ZnO NPs) from discarded Zn–C dry cell batteries. The recovered Zn shells of the batteries were processed via a wet chemical route and calcination that yielded phase-pure wurtzite ZnO with nanoscale crystallite size, as confirmed by XRD analysis. A comprehensive crystallographic analysis was carried out to estimate crystallite size by exploiting various methods where Halder–Wagner and size–strain plot methods showed best fit to the experimental data (35.10 nm size and R2 = 0.967). Band structure analysis using XPS/UPS revealed valence and conduction band edges relative to the vacuum level at −11.89 eV and −7.15 eV respectively, while the optical studies showed a wide band gap of 4.74 eV. FESEM analysis revealed assorted morphologies with an average particle size of 146 ± 89 nm, while TEM showed a more resolved average primary particle size of 40 ± 27 nm, corroborating the XRD analysis. Functional group analysis by FTIR and Raman spectroscopy confirmed the characteristic Zn–O stretching and the E2 (high) vibrational modes. The as prepared ZnO NPs displayed antibacterial activity against Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus). However, no significant activity was observed against the tested Gram-negative strains. This work demonstrates a facile route to transform hazardous battery waste into functional ZnO NPs with promising structural and antibacterial properties.


  • Facile Fabrication of Seashell-Derived Hydroxyapatite-Graphene Oxide (HAp/GO) Composites for High-Performance Dye Adsorption

    by Sohag Hossain, Sahadat Hossain, Fariha Chowdhury, Saiful Quddus, Umme Sarmeen Akhtar, Nazmul Islam Tanvir, Samina Ahmed, Mashrafi Bin Mobarak


  • Open Access

    Comparative evaluation of amoxicillin loading and release behavior from waste-derived hydroxyapatite synthesized by solid-state and wet chemical routes

    by Mashrafi Bin Mobarak, Sumaya Tabassum, Md Sohag Hossain, Nourin Tarannum, Fariha Chowdhury, Md. Sahadat Hossain, Nazmul Islam Tanvir, Samina Ahmed

    This work compares amoxicillin loading and release from hydroxyapatite synthesized via solid-state and wet chemical routes using waste eggshells, showing how synthesis pathway governs drug delivery performance.


  • Open Access

    Upcycling battery waste into Zn-BTC metal organic framework for dual applications in electrochemical sensing of uric acid and antibacterial applications

    by Sohag Hossain, Sharuk Alam Aumi, Nourin Tarannum, Fariha Chowdhury, Sahadat Hossain, Farid Ahmed, Nazmul Islam Tanvir, Umme Sarmeen Akhtar, Samina Ahmed, Mashrafi Bin Mobarak

    This study reports the sustainable synthesis of a zinc-based metal–organic framework (Zn-BTC MOF) using zinc, extracted from waste dry cell batteries. A three-step route involving zinc recovery, hydroxide precipitation, and solvothermal coordination with 1,3,5-benzenetricarboxylic acid (BTC) led to the formation of crystalline Zn-BTC. Comprehensive characterization, utilizing techniques such as XRD, FTIR, Raman, FESEM, TEM, XPS, EDS, and TGA-DSC, confirmed the formation of a highly ordered Zn-BTC MOF framework structure with nanoscale morphology and thermal stability. Zn-BTC MOF exhibited promising electrochemical performance in detecting uric acid (UA), with a wide linear detection range (0–200 μM), low detection limit (1.43 μM), and high electroactive surface area (0.16 cm2). Additionally, the MOF showed significant antibacterial activity, with minimum inhibitory and bactericidal concentrations of 0.1 and 0.6 mg mL−1 against Bacillus subtilis, and 0.2 and 0.8 mg mL−1 against Escherichia coli. By fabricating the MOF using recycled zinc, this research highlights its dual potential as a high-performance electrochemical sensor and antibacterial agent.