Patrick Mongan

Welding is an extensively used technique in manufacturing, and as for every other process, there is the potential for defects in the weld joint that could be catastrophic to the manufactured products. Different welding processes use different parameter settings, which greatly impact the quality of the final welded products. The focus of research in weld defect detection is to develop a non-destructive testing method for weld quality assessment based on observing the weld with an RGB camera. Deep learning techniques have been widely used in the domain of weld defect detection in recent times, but the majority of them use, for example, X-ray images. An RGB image-based solution is attractive, as RGB cameras are comparatively inexpensive compared to X-ray image solutions. However, the number of publicly available RGB image datasets for weld defect detection is comparatively lower than that of X-ray image datasets. This work achieves a complete weld quality assessment involving lap shear strength prediction and visual weld defect detection from an extremely limited dataset. First, a multimodal dataset is generated by the fusion of image data features extracted using a convolutional autoencoder (CAE) designed in this experiment and input parameter settings data. The fusion of the dataset reduced lap shear strength (LSS) prediction errors by 34% compared to prediction errors using only input parameter settings data. This is a promising result, considering the extremely small dataset size. This work also achieves visual weld defect detection on the same limited dataset with the help of an ultrasonic weld defect dataset generated using offline and online data augmentation. The weld defect detection achieves an accuracy of 74%, again a promising result that meets standard requirements. The combination of lap shear strength prediction and visual defect detection leads to a complete inspection to avoid premature failure of the ultrasonic weld joints. The weld defect detection was compared against the publicly available image dataset for surface defect detection.

The use of composite materials is increasing in industry sectors such as renewable energy generation and storage, transport (including automotive, aerospace and agri-machinery) and construction. This is a result of the various advantages of composite materials over their monolithic counterparts, such as high strength-to-weight ratio, corrosion resistance, and superior fatigue performance. However, there is a lack of detailed knowledge in relation to fusion joining techniques for composite materials. In this work, ultrasonic welding is carried out on a carbon fibre/PEKK composite material bonded to carbon fibre/epoxy composite to investigate the influence of weld process parameters on the joint’s lap shear strength (LSS), the process repeatability, and the process induced defects. A 3³ parametric study is carried out and a robust machine learning model is developed using a hybrid genetic algorithm–artificial neural network (GA–ANN) trained on the experimental data. Bayesian optimisation is employed to determine the most suitable GA–ANN hyperparameters and the resulting GA–ANN surrogate model is exploited to optimise the welding process, where the process performance metrics are LSS, repeatability and joint visual quality. The prediction for the optimal LSS was subsequently validated through a further set of experiments, which resulted in a prediction error of just 3%.

The drilling of carbon fibre reinforced polymer composites presents a number of manufacturing challenges which result in automation difficulties. Such problems include excessive tool wear, delamination and uncut fibres. Resulting from this, frequent inspections and regular monitoring are mandatory during drilling process. Component rejections due to delamination is also of concern,

Ultrasonic welding is an energy efficient and cost-effective method of joining materials in the aerospace, automotive and packing industries. The quality of the joint achievable is heavily dependent on the process input parameters (e.g., welding energy, clamping pressure, vibrational amplitude). The traditional approach to optimising a manufacturing process, such as ultrasonic