Feipeng Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Feipeng Zhao has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Xueliang Sun
Eastern Institute of Technology, Ningbo Key Laboratory of All-Solid-State Battery, Zhejiang Province Key Laboratory of Solid State Power Battery Technology and Application
8 shared publications Shumin Zhang
5 shared publicationsJing Luo
Department of Mechanical and Materials Engineering, University of Western Ontario, London, Canada
4 shared publications- Yanguang Li
Institute of Functional Nano & Soft Materials (FUNSOM) Soochow University Suzhou China
4 shared publications - Jung Tae Kim
Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
3 shared publications - Tsun-Kong Sham
Department of Chemistry, University of Western Ontario, London, Canada
3 shared publications
Latest Publications
- 4 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (44) , e73904
Geometric‐Topology‐Driven Membrane Design for Suppressing Polysulfide Crossover in Aqueous Redox Flow Batteries
Developing highly selective ion‐exchange membranes to suppress active‐species crossover remains a critical challenge in aqueous redox flow batteries (ARFBs). Unfortunately, their practical performance is often compromised by hydration‐induced membrane swelling, giving rise to non‐selective water channels that facilitate catholyte‐anolyte crossover. Herein, we show that geometric topology is a previously overlooked but decisive parameter governing membrane microstructure, hydration behavior, and ion selectivity. Using a coarse‐grained molecular dynamics framework, we reveal a geometry‐driven phase‐separation mechanism under membrane hydration. Isotropic 0D geometric motifs remain uniformly dispersed and promote the formation of highly interconnected yet spatially confined hydration networks, whereas anisotropic one‐ and 2D geometric motifs exhibit a strong propensity to bundle and aggregate, inducing phase separation and interfacial voids that promote non‐selective transport. Guided by this principle, a membrane incorporating 0D geometric motifs simultaneously achieves high cationic conductivity and strong polysulfide rejection, enabling stable operation of a polysulfide‐based aqueous redox flow battery for over 700 h with Coulombic efficiencies exceeding ∼99.5% and peak power densities of ∼138 mW cm − 2 , dramatically outperforming conventional commercial membranes and demonstrating the effectiveness of the geometry‐guided membrane design principle in advancing future membrane engineering.
- 4 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (44) , e73904
Geometric‐Topology‐Driven Membrane Design for Suppressing Polysulfide Crossover in Aqueous Redox Flow Batteries
Developing highly selective ion‐exchange membranes to suppress active‐species crossover remains a critical challenge in aqueous redox flow batteries (ARFBs). Unfortunately, their practical performance is often compromised by hydration‐induced membrane swelling, giving rise to non‐selective water channels that facilitate catholyte‐anolyte crossover. Herein, we show that geometric topology is a previously overlooked but decisive parameter governing membrane microstructure, hydration behavior, and ion selectivity. Using a coarse‐grained molecular dynamics framework, we reveal a geometry‐driven phase‐separation mechanism under membrane hydration. Isotropic 0D geometric motifs remain uniformly dispersed and promote the formation of highly interconnected yet spatially confined hydration networks, whereas anisotropic one‐ and 2D geometric motifs exhibit a strong propensity to bundle and aggregate, inducing phase separation and interfacial voids that promote non‐selective transport. Guided by this principle, a membrane incorporating 0D geometric motifs simultaneously achieves high cationic conductivity and strong polysulfide rejection, enabling stable operation of a polysulfide‐based aqueous redox flow battery for over 700 h with Coulombic efficiencies exceeding ∼99.5% and peak power densities of ∼138 mW cm − 2 , dramatically outperforming conventional commercial membranes and demonstrating the effectiveness of the geometry‐guided membrane design principle in advancing future membrane engineering.
- 27 June 2026
- Published by Elsevier in Materials Today
- Vol. 98
Transition metal halides for high-performance and sustainable solid-state batteries
- 27 June 2026
- Published by Elsevier in Materials Today
- Vol. 98
Transition metal halides for high-performance and sustainable solid-state batteries
- Top Cited Papers
- 9 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 390 (6769) , 199-204
Anion sublattice design enables superionic conductivity in crystalline oxyhalides
Solid-state batteries are attractive energy storage systems as a result of their inherent safety, but their development hinges on advanced solid-state electrolytes (SSEs). Most SSEs remain largely confined to single-anion systems (e.g., sulfides, oxides, halides, and polymers). Through mixed-anion design strategy, we develop crystalline Li 3 Ta 3 O 4 Cl 10 (LTOC) and its derivatives with excellent ionic conductivities (up to 13.7 millisiemens per centimeter at 25°C) and electrochemical stability. The LTOC structure features mixed-anion spiral chains, consisting of corner-shared oxygen and terminal chlorine atoms, which induces continuous “tetrahedron-tetrahedron” Li-ion migration pathways with low energy barriers. Additionally, LTOC demonstrates holistic cathode compatibility, enabling solid-state batteries operation at 4.9 volts versus Li/Li + and low temperature, down to −50°C. These findings describe a promising class of superionic conductors for high-performance solid-state batteries.
- 9 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 390 (6769) , 199-204
Top Cited PapersAnion sublattice design enables superionic conductivity in crystalline oxyhalides
Solid-state batteries are attractive energy storage systems as a result of their inherent safety, but their development hinges on advanced solid-state electrolytes (SSEs). Most SSEs remain largely confined to single-anion systems (e.g., sulfides, oxides, halides, and polymers). Through mixed-anion design strategy, we develop crystalline Li 3 Ta 3 O 4 Cl 10 (LTOC) and its derivatives with excellent ionic conductivities (up to 13.7 millisiemens per centimeter at 25°C) and electrochemical stability. The LTOC structure features mixed-anion spiral chains, consisting of corner-shared oxygen and terminal chlorine atoms, which induces continuous “tetrahedron-tetrahedron” Li-ion migration pathways with low energy barriers. Additionally, LTOC demonstrates holistic cathode compatibility, enabling solid-state batteries operation at 4.9 volts versus Li/Li + and low temperature, down to −50°C. These findings describe a promising class of superionic conductors for high-performance solid-state batteries.
- Top Cited Papers
- 25 June 2025
- Published by Springer Nature in Nature
- Vol. 643 (8070) , 111-118
A cost-effective all-in-one halide material for all-solid-state batteries
All-solid-state batteries require advanced cathode designs to realize their potential for high energy density and economic viability1,2,3. Integrated all-in-one cathodes, which eliminate inactive conductive additives and heterogeneous interfaces, hold promise for substantial energy and stability gains but are hindered by materials lacking sufficient Li+/e− conductivity, mechanical robustness and structural stability4,5,6,7,8,9,10,11,12,13,14. Here we present Li1.3Fe1.2Cl4, a cost-effective halide material that overcomes these challenges. Leveraging reversible Fe2+/Fe3+ redox and rapid Li+/e− transport within its framework, Li1.3Fe1.2Cl4 achieves an electrode energy density of 529.3 Wh kg−1 versus Li+/Li. Critically, Li1.3Fe1.2Cl4 shows unique dynamic properties during cycling, including reversible local Fe migration and a brittle-to-ductile transition that confers self-healing behaviour. This enables exceptional cycling stability, maintaining 90% capacity retention for 3,000 cycles at a rate of 5 C. Integration of Li1.3Fe1.2Cl4 with a nickel-rich layered oxide further increases the energy density to 725.6 Wh kg−1. By harnessing the advantageous dynamic mechanical and diffusion properties of all-in-one halides, this work establishes all-in-one halides as an avenue for energy-dense, durable cathodes in next-generation all-solid-state batteries.
- 25 June 2025
- Published by Springer Nature in Nature
- Vol. 643 (8070) , 111-118
Top Cited PapersA cost-effective all-in-one halide material for all-solid-state batteries
All-solid-state batteries require advanced cathode designs to realize their potential for high energy density and economic viability1,2,3. Integrated all-in-one cathodes, which eliminate inactive conductive additives and heterogeneous interfaces, hold promise for substantial energy and stability gains but are hindered by materials lacking sufficient Li+/e− conductivity, mechanical robustness and structural stability4,5,6,7,8,9,10,11,12,13,14. Here we present Li1.3Fe1.2Cl4, a cost-effective halide material that overcomes these challenges. Leveraging reversible Fe2+/Fe3+ redox and rapid Li+/e− transport within its framework, Li1.3Fe1.2Cl4 achieves an electrode energy density of 529.3 Wh kg−1 versus Li+/Li. Critically, Li1.3Fe1.2Cl4 shows unique dynamic properties during cycling, including reversible local Fe migration and a brittle-to-ductile transition that confers self-healing behaviour. This enables exceptional cycling stability, maintaining 90% capacity retention for 3,000 cycles at a rate of 5 C. Integration of Li1.3Fe1.2Cl4 with a nickel-rich layered oxide further increases the energy density to 725.6 Wh kg−1. By harnessing the advantageous dynamic mechanical and diffusion properties of all-in-one halides, this work establishes all-in-one halides as an avenue for energy-dense, durable cathodes in next-generation all-solid-state batteries.
- Open Access
- 7 May 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (28) , e2501544
A Perspective on the Origin of High‐Entropy Solid Electrolytes
As the key material for the all‐solid‐state batteries (ASSBs), solid electrolytes (SEs) have attracted increasing attention. Recently, a novel design strategy−high‐entropy (HE) approach is frequently reported to improve the ionic conductivity and electrochemical performance of SEs. However, the fundamental understandings on the HE working mechanism and applicability evaluation of HE concept are deficient, which would impede the sustainable development of a desirable strategy to enable high‐performance SEs. In this contribution, the essence of HE‐related approaches and their positive effects on SEs are evaluated. The reported HE strategy stems from complex compositional regulations. The derived structural stability and enhanced property are originally from the modulated system disorder and subtle local‐structure evolutions, respectively. While HE ardently describes the increased entropy/disorder during the modification of prevailing SEs, rigorous experimental formulations, and direct correlations between the HE structures and desired properties are necessary to be established. This perspective would be a timely and critical overview for the HE approaches in the context of SEs, aiming to stimulate further discussion and exploration in this emerging research direction.
- 7 May 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (28) , e2501544
Open AccessA Perspective on the Origin of High‐Entropy Solid Electrolytes
As the key material for the all‐solid‐state batteries (ASSBs), solid electrolytes (SEs) have attracted increasing attention. Recently, a novel design strategy−high‐entropy (HE) approach is frequently reported to improve the ionic conductivity and electrochemical performance of SEs. However, the fundamental understandings on the HE working mechanism and applicability evaluation of HE concept are deficient, which would impede the sustainable development of a desirable strategy to enable high‐performance SEs. In this contribution, the essence of HE‐related approaches and their positive effects on SEs are evaluated. The reported HE strategy stems from complex compositional regulations. The derived structural stability and enhanced property are originally from the modulated system disorder and subtle local‐structure evolutions, respectively. While HE ardently describes the increased entropy/disorder during the modification of prevailing SEs, rigorous experimental formulations, and direct correlations between the HE structures and desired properties are necessary to be established. This perspective would be a timely and critical overview for the HE approaches in the context of SEs, aiming to stimulate further discussion and exploration in this emerging research direction.
- 18 April 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (28)
Halide Chemistry Boosts All‐Solid‐State Li‐S Batteries
All‐solid‐state Li‐S batteries (ASSLSBs) are emerging as a promising energy storage solution due to their low cost and high energy density. Their solid‐state configuration effectively eliminates the notorious shuttle effect caused by soluble polysulfides in conventional liquid electrolytes. However, the heterogeneous solid‐to‐solid interfaces introduce significant challenges, including sluggish ion/electron transport and interfacial instability among electrode materials, conductive additives, and solid electrolytes (SEs). Recently, halide‐based strategies have gained attention for enabling high‐performance ASSLSBs. This perspective highlights these strategies, emphasizing the role of halide chemistry in enhancing ASSLSB kinetics. It is contended that halides (e.g., iodides) in sulfur‐based cathode composites—such as Li 2 S and transition metal sulfides—can activate S/Li 2 S redox reactions, improving both ionic and electronic conductivities. This “catalytic effect” of halides accelerates the reversible transition, even in the absence of conductive additives like SEs or conductive carbons. Moreover, halides at the anode interface play a crucial role in preventing Li dendrite formation and SE degradation, owing to their large polarizability and high interfacial energy. This perspective provides a timely and insightful summary of halide chemistry's impact on ASSLSB kinetics, offering inspiration for further research and broader adoption of halide‐based strategies in next‐generation solid‐state Li‐S batteries.
- 18 April 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (28)
Halide Chemistry Boosts All‐Solid‐State Li‐S Batteries
All‐solid‐state Li‐S batteries (ASSLSBs) are emerging as a promising energy storage solution due to their low cost and high energy density. Their solid‐state configuration effectively eliminates the notorious shuttle effect caused by soluble polysulfides in conventional liquid electrolytes. However, the heterogeneous solid‐to‐solid interfaces introduce significant challenges, including sluggish ion/electron transport and interfacial instability among electrode materials, conductive additives, and solid electrolytes (SEs). Recently, halide‐based strategies have gained attention for enabling high‐performance ASSLSBs. This perspective highlights these strategies, emphasizing the role of halide chemistry in enhancing ASSLSB kinetics. It is contended that halides (e.g., iodides) in sulfur‐based cathode composites—such as Li 2 S and transition metal sulfides—can activate S/Li 2 S redox reactions, improving both ionic and electronic conductivities. This “catalytic effect” of halides accelerates the reversible transition, even in the absence of conductive additives like SEs or conductive carbons. Moreover, halides at the anode interface play a crucial role in preventing Li dendrite formation and SE degradation, owing to their large polarizability and high interfacial energy. This perspective provides a timely and insightful summary of halide chemistry's impact on ASSLSB kinetics, offering inspiration for further research and broader adoption of halide‐based strategies in next‐generation solid‐state Li‐S batteries.
- 4 April 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (12) , 4055-4063
Revealing unprecedented cathode interface behavior in all-solid-state batteries with oxychloride solid electrolytes
All-solid-state lithium batteries (ASSLBs) are highly desirable for their sustainability, enhanced safety, and increased energy densities. The compatibility between cathodes and solid electrolytes (SEs) is critical for ASSLB electrochemical performance. While the conventional LiCoO2 (LCO) cathode shows structural stability, limitations in the energy density and materials cost prompt exploration of Ni-rich, Co-poor cathodes like lithium nickel cobalt manganese oxide (NCM). However, Ni-rich NCM faces challenges with typical solid electrolytes (e.g., sulfides or oxides), hindering high-energy-density ASSLBs. Our study reveals a unique cathode/electrolyte interface behavior with lithium tantalum oxychloride (LTOC) superionic conductors, favoring Co-less, Ni-rich NCM over LCO. The Ta/Co interaction is identified as a failure mechanism for LTOC/LCO, while a kinetically stabilized interface is achieved with lean-Co cathodes. Beyond the cathode material composition, our study also establishes a correlation between the temperature used for battery testing and both interface reactivity and cell performance. This research provides crucial insights into the innovative design of high-performance ASSLBs based on the promising LTOC oxychloride SEs.
- 4 April 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (12) , 4055-4063
Revealing unprecedented cathode interface behavior in all-solid-state batteries with oxychloride solid electrolytes
All-solid-state lithium batteries (ASSLBs) are highly desirable for their sustainability, enhanced safety, and increased energy densities. The compatibility between cathodes and solid electrolytes (SEs) is critical for ASSLB electrochemical performance. While the conventional LiCoO2 (LCO) cathode shows structural stability, limitations in the energy density and materials cost prompt exploration of Ni-rich, Co-poor cathodes like lithium nickel cobalt manganese oxide (NCM). However, Ni-rich NCM faces challenges with typical solid electrolytes (e.g., sulfides or oxides), hindering high-energy-density ASSLBs. Our study reveals a unique cathode/electrolyte interface behavior with lithium tantalum oxychloride (LTOC) superionic conductors, favoring Co-less, Ni-rich NCM over LCO. The Ta/Co interaction is identified as a failure mechanism for LTOC/LCO, while a kinetically stabilized interface is achieved with lean-Co cathodes. Beyond the cathode material composition, our study also establishes a correlation between the temperature used for battery testing and both interface reactivity and cell performance. This research provides crucial insights into the innovative design of high-performance ASSLBs based on the promising LTOC oxychloride SEs.
- Open Access
- 12 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Manipulating Li2S2/Li2S mixed discharge products of all-solid-state lithium sulfur batteries for improved cycle life
All-solid-state lithium-sulfur batteries offer a compelling opportunity for next-generation energy storage, due to their high theoretical energy density, low cost, and improved safety. However, their widespread adoption is hindered by an inadequate understanding of their discharge products. Using X-ray absorption spectroscopy and time-of-flight secondary ion mass spectrometry, we reveal that the discharge product of all-solid-state lithium-sulfur batteries is not solely composed of Li2S, but rather consists of a mixture of Li2S and Li2S2. Employing this insight, we propose an integrated strategy that: (1) manipulates the lower cutoff potential to promote a Li2S2-dominant discharge product and (2) incorporates a trace amount of solid-state catalyst (LiI) into the S composite electrode. This approach leads to all-solid-state cells with a Li-In alloy negative electrode that deliver a reversible capacity of 979.6 mAh g−1 for 1500 cycles at 2.0 A g−1 at 25 °C. Our findings provide crucial insights into the discharge products of all-solid-state lithium-sulfur batteries and may offer a feasible approach to enhance their overall performance.
- 12 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessManipulating Li2S2/Li2S mixed discharge products of all-solid-state lithium sulfur batteries for improved cycle life
All-solid-state lithium-sulfur batteries offer a compelling opportunity for next-generation energy storage, due to their high theoretical energy density, low cost, and improved safety. However, their widespread adoption is hindered by an inadequate understanding of their discharge products. Using X-ray absorption spectroscopy and time-of-flight secondary ion mass spectrometry, we reveal that the discharge product of all-solid-state lithium-sulfur batteries is not solely composed of Li2S, but rather consists of a mixture of Li2S and Li2S2. Employing this insight, we propose an integrated strategy that: (1) manipulates the lower cutoff potential to promote a Li2S2-dominant discharge product and (2) incorporates a trace amount of solid-state catalyst (LiI) into the S composite electrode. This approach leads to all-solid-state cells with a Li-In alloy negative electrode that deliver a reversible capacity of 979.6 mAh g−1 for 1500 cycles at 2.0 A g−1 at 25 °C. Our findings provide crucial insights into the discharge products of all-solid-state lithium-sulfur batteries and may offer a feasible approach to enhance their overall performance.
- Top Cited PapersOpen Access
- 24 June 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
A family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries
Solid electrolyte is vital to ensure all-solid-state batteries with improved safety, long cyclability, and feasibility at different temperatures. Herein, we report a new family of amorphous solid electrolytes, xLi2O-MCly (M = Ta or Hf, 0.8 ≤ x ≤ 2, y = 5 or 4). xLi2O-MCly amorphous solid electrolytes can achieve desirable ionic conductivities up to 6.6 × 10−3 S cm−1 at 25 °C, which is one of the highest values among all the reported amorphous solid electrolytes and comparable to those of the popular crystalline ones. The mixed-anion structural models of xLi2O-MCly amorphous SEs are well established and correlated to the ionic conductivities. It is found that the oxygen-jointed anion networks with abundant terminal chlorines in xLi2O-MCly amorphous solid electrolytes play an important role for the fast Li-ion conduction. More importantly, all-solid-state batteries using the amorphous solid electrolytes show excellent electrochemical performance at both 25 °C and −10 °C. Long cycle life (more than 2400 times of charging and discharging) can be achieved for all-solid-state batteries using the xLi2O-TaCl5 amorphous solid electrolyte at 400 mA g−1, demonstrating vast application prospects of the oxychloride amorphous solid electrolytes.
- 24 June 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Top Cited PapersOpen AccessA family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries
Solid electrolyte is vital to ensure all-solid-state batteries with improved safety, long cyclability, and feasibility at different temperatures. Herein, we report a new family of amorphous solid electrolytes, xLi2O-MCly (M = Ta or Hf, 0.8 ≤ x ≤ 2, y = 5 or 4). xLi2O-MCly amorphous solid electrolytes can achieve desirable ionic conductivities up to 6.6 × 10−3 S cm−1 at 25 °C, which is one of the highest values among all the reported amorphous solid electrolytes and comparable to those of the popular crystalline ones. The mixed-anion structural models of xLi2O-MCly amorphous SEs are well established and correlated to the ionic conductivities. It is found that the oxygen-jointed anion networks with abundant terminal chlorines in xLi2O-MCly amorphous solid electrolytes play an important role for the fast Li-ion conduction. More importantly, all-solid-state batteries using the amorphous solid electrolytes show excellent electrochemical performance at both 25 °C and −10 °C. Long cycle life (more than 2400 times of charging and discharging) can be achieved for all-solid-state batteries using the xLi2O-TaCl5 amorphous solid electrolyte at 400 mA g−1, demonstrating vast application prospects of the oxychloride amorphous solid electrolytes.