Fawad Saeed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fawad Saeed has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Raza
Joint International Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China
3 shared publications - Nasrud Din
Joint International Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China
3 shared publications - Wei Lei
Southeast University
3 shared publications Alagesan Subramanian
Southeast Univ. (China)
2 shared publications- Qasim Khan
Schulich School of Engineering, University of Calgary, Calgary, T2N 1N4, Canada
2 shared publications - Sajid Hussain
Southeast University,Display Research Center,Nanjing,China
2 shared publications
Latest Publications
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Additive Processed ZnO Transparent Vertical Field Effect Transistor
Transparent vertical field effect transistor is fabricated by additive process, using only spin-coating to deposit successive layers. The main purpose is to integrate driving transistor and OLED, minimizing the area of the pixel of a transparent display using the lowest cost process. After optimizing each constitutive layer, HfO 2 layer as gate insulator, AuNWs network as non-continuous source and ZnO as semiconducting layer, full vertical ITO / HfO 2 / AuNWs / ZnO / AgNWs transistor is fabricated and characterized. The drain current is modulated by the gate voltage by more than 4 orders. The transparency of the full device is 85%.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Additive Processed ZnO Transparent Vertical Field Effect Transistor
Transparent vertical field effect transistor is fabricated by additive process, using only spin-coating to deposit successive layers. The main purpose is to integrate driving transistor and OLED, minimizing the area of the pixel of a transparent display using the lowest cost process. After optimizing each constitutive layer, HfO 2 layer as gate insulator, AuNWs network as non-continuous source and ZnO as semiconducting layer, full vertical ITO / HfO 2 / AuNWs / ZnO / AgNWs transistor is fabricated and characterized. The drain current is modulated by the gate voltage by more than 4 orders. The transparency of the full device is 85%.
- Open Access
- 17 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2290
Highly Stable Inverted CdSe/ZnS-Based Light-Emitting Diodes by Nonvacuum Technique ZTO as the Electron-Transport Layer
CdSe/ZnS quantum dots (QDs) have attracted great consideration from investigators owing to their excellent photo-physical characteristics and application in quantum dot light-emitting diodes (QD-LEDs). The CdSe/ZnS-based inverted QD-LEDs structure uses high-quality semiconductors electron transport layers (ETLs), a multilayered hole transporting layers (HTLs). In QD-LED, designing a device structure with a minimum energy barrier between adjacent layers is very important to achieve high efficiency. A high mobility polymer of poly (9,9-dioctylfluorene-co-N-(4-(3-methylpropyl)) diphenylamine (TFB) was doped with 4,4′-bis-(carbazole-9-yl) biphenyl (CBP) with deep energy level to produce composite TFB:CBP holes to solve energy mismatch (HTL). In addition, we also improved the QD-LED device structure by using zinc tin oxide (ZTO) as ETL to improve device efficiency. The device turn-on voltage Vt (1 cd m−2) with ZTO ETL reduced from 2.4 V to 1.9 V significantly. Furthermore, invert structure devices exhibit luminance of 4296 cd m−2, current-efficiency (CE) of 7.36 cd A−1, and external-quantum efficiency (EQE) of 3.97%. For the QD-LED based on ZTO, the device efficiency is improved by 1.7 times.
- 17 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2290
Open AccessHighly Stable Inverted CdSe/ZnS-Based Light-Emitting Diodes by Nonvacuum Technique ZTO as the Electron-Transport Layer
CdSe/ZnS quantum dots (QDs) have attracted great consideration from investigators owing to their excellent photo-physical characteristics and application in quantum dot light-emitting diodes (QD-LEDs). The CdSe/ZnS-based inverted QD-LEDs structure uses high-quality semiconductors electron transport layers (ETLs), a multilayered hole transporting layers (HTLs). In QD-LED, designing a device structure with a minimum energy barrier between adjacent layers is very important to achieve high efficiency. A high mobility polymer of poly (9,9-dioctylfluorene-co-N-(4-(3-methylpropyl)) diphenylamine (TFB) was doped with 4,4′-bis-(carbazole-9-yl) biphenyl (CBP) with deep energy level to produce composite TFB:CBP holes to solve energy mismatch (HTL). In addition, we also improved the QD-LED device structure by using zinc tin oxide (ZTO) as ETL to improve device efficiency. The device turn-on voltage Vt (1 cd m−2) with ZTO ETL reduced from 2.4 V to 1.9 V significantly. Furthermore, invert structure devices exhibit luminance of 4296 cd m−2, current-efficiency (CE) of 7.36 cd A−1, and external-quantum efficiency (EQE) of 3.97%. For the QD-LED based on ZTO, the device efficiency is improved by 1.7 times.
- 1 July 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11877, 4
Highly efficient light emitting transistor with transparent electrode using simulation
Vertical field effect light emitting transistors (VFELETs) have an advantage over lateral ones because they have the ability to conveniently decrease the channel volume. In the VFELET both current density and cut-off frequency are enhanced by this. Current work presents a highly efficient VFELET simulation process based on CdSe quantum dots in which the ITO gate is accompanied by dielectric Al2O3. While using AgNW as drain material and Au as source. By changing gate voltage as well as Vds, the output of the VFELET is greatly improved. The 10-5A Id has been achieved by using Vgs 0.4, 0.8, 1.2 and 1.6V. In addition, a higher EQE (2.6 %) and maximum luminance (1.1 × 104 cd m-2) have also been achieved in current work.
- 1 July 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11877, 4
Highly efficient light emitting transistor with transparent electrode using simulation
Vertical field effect light emitting transistors (VFELETs) have an advantage over lateral ones because they have the ability to conveniently decrease the channel volume. In the VFELET both current density and cut-off frequency are enhanced by this. Current work presents a highly efficient VFELET simulation process based on CdSe quantum dots in which the ITO gate is accompanied by dielectric Al2O3. While using AgNW as drain material and Au as source. By changing gate voltage as well as Vds, the output of the VFELET is greatly improved. The 10-5A Id has been achieved by using Vgs 0.4, 0.8, 1.2 and 1.6V. In addition, a higher EQE (2.6 %) and maximum luminance (1.1 × 104 cd m-2) have also been achieved in current work.
- 1 January 2021
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 19 (3) , 030005
Stable and high performance all-inorganic perovskite light-emitting diodes with anti-solvent treatment
Optoelectronic applications based on the perovskites always face challenges due to the inherent chemical composition volatility of perovskite precursors. The efficiency of perovskite-based light-emitting diodes (Pe-LEDs) can be enhanced by improving the perovskite film via solvent engineering. A dual solvent post-treatment strategy was applied to the perovskite film, which provides a synchronous effect of passivating surface imperfections and reduces exciton quenching, as evidenced by improved surface morphology and photoluminance. Thus, the optimized Pe-LEDs reach 17,866cd⋅m−2 maximum brightness, 45.8cd⋅A−1 current efficiency, 8.3% external quantum efficiency, and relatively low turn-on voltage of 2.0 V. Herein, we present a simple technique for the fabrication of stable and efficient Pe-LEDs.
- 1 January 2021
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 19 (3) , 030005
Stable and high performance all-inorganic perovskite light-emitting diodes with anti-solvent treatment
Optoelectronic applications based on the perovskites always face challenges due to the inherent chemical composition volatility of perovskite precursors. The efficiency of perovskite-based light-emitting diodes (Pe-LEDs) can be enhanced by improving the perovskite film via solvent engineering. A dual solvent post-treatment strategy was applied to the perovskite film, which provides a synchronous effect of passivating surface imperfections and reduces exciton quenching, as evidenced by improved surface morphology and photoluminance. Thus, the optimized Pe-LEDs reach 17,866cd⋅m−2 maximum brightness, 45.8cd⋅A−1 current efficiency, 8.3% external quantum efficiency, and relatively low turn-on voltage of 2.0 V. Herein, we present a simple technique for the fabrication of stable and efficient Pe-LEDs.