Hao Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hao Tang has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Kai Li
8 shared publications- Cong Yin
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
7 shared publications Yan Gao
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, P. R. China
7 shared publications- Zhijian Wu
State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
7 shared publications Guanru Xing
College of Chemical Engineering, Inner Mongolia University of Technology, Inner Mongolia Key Laboratory of Theoretical and Computational Chemistry Simulation, Hohhot, People’s Republic of China
3 shared publications- Lin Cheng
Inner Mongolia Key Laboratory of Theoretical and Computational Chemistry Simulation, School of Chemical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
3 shared publications
Latest Publications
- Open Access
Rapid Estimation Technology of Fuel Cell Internal State Based on Single Frequency Impedance Phase Angle Measurement: A Case Study
Improper internal states in proton exchange membrane fuel cells (PEMFCs), such as insufficient reactant concentration, lower membrane water content, and excessive liquid water, will lead to significant reductions in durability and reliability, which is a bottleneck restricting the large-scale commercial application of the PEMFC system. Closed-loop management with internal state feedback is regarded as a promising strategy for prolonging its lifespan and enhancing its reliability. The key issue for the closed-loop management strategy is how to estimate the internal operating state of the PEMFC stack accurately and quickly. Consequently, an estimation method of stack internal operating states based on the medium frequency impedance phase angle measurement, which has the characteristics of short acquisition time, small measurement error, and high resolution, is proposed in this paper. The sensitivity, monotonicity, correlation analysis in the steady state, and response characteristics analysis in the dynamic state show that the proposed method is effective, competent, and qualified for internal state estimation. Then, the estimated internal state is applied to the system’s closed-loop management as feedback. The experiment results show that the PEMFC can be maintained at the expected state and that improper states will be avoided. The proposed estimation technology will significantly facilitate the system’s closed-loop management, thereby enhancing the reliability and durability of PEMFCs.
Open AccessRapid Estimation Technology of Fuel Cell Internal State Based on Single Frequency Impedance Phase Angle Measurement: A Case Study
Improper internal states in proton exchange membrane fuel cells (PEMFCs), such as insufficient reactant concentration, lower membrane water content, and excessive liquid water, will lead to significant reductions in durability and reliability, which is a bottleneck restricting the large-scale commercial application of the PEMFC system. Closed-loop management with internal state feedback is regarded as a promising strategy for prolonging its lifespan and enhancing its reliability. The key issue for the closed-loop management strategy is how to estimate the internal operating state of the PEMFC stack accurately and quickly. Consequently, an estimation method of stack internal operating states based on the medium frequency impedance phase angle measurement, which has the characteristics of short acquisition time, small measurement error, and high resolution, is proposed in this paper. The sensitivity, monotonicity, correlation analysis in the steady state, and response characteristics analysis in the dynamic state show that the proposed method is effective, competent, and qualified for internal state estimation. Then, the estimated internal state is applied to the system’s closed-loop management as feedback. The experiment results show that the PEMFC can be maintained at the expected state and that improper states will be avoided. The proposed estimation technology will significantly facilitate the system’s closed-loop management, thereby enhancing the reliability and durability of PEMFCs.
- Open Access
- 1 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12895
Improving a Fuel Cell System’s Thermal Management by Optimizing Thermal Control with the Particle Swarm Optimization Algorithm and an Artificial Neural Network
The thermal management of proton exchange membrane fuel cell systems plays a significant role in a stack’s lifetime, performance, and reliability. However, it is challenging to manage the thermal system precisely due to the multiple coupling relationships between the stack’s components, its operating environment, and its thermal management system. In addition, temperature hysteresis (temporal inconsistency of temperature with electrochemical reactions and fluid mechanics) imposes more difficulties on thermal control. We aim to develop an effective thermal control model for the fuel cell system to improve the temperature regulation accuracy and response speed and thus achieve highly stable temperature control. A dynamic mechanistic model is first developed based on the physical processes of the stack and its thermal management system. The model is then validated through experiments. Based on this dynamic mechanistic model, a control model is proposed for stack thermal management with the particle swarm optimization algorithm and an artificial neural network. It is applied and compared with the traditional PID algorithm. The simulation results indicate that the regulation time of the coolant inlet temperature as the current changes is reduced by more than 74%, and the overshoot is reduced by more than 50%. Therefore, the control model can enhance the dynamic response capability and temperature control precision under complex operating conditions with constantly changing load current and preset stack temperature, ensuring the temperature’s stability and thus improving the fuel cell system’s reliability and durability.
- 1 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12895
Open AccessImproving a Fuel Cell System’s Thermal Management by Optimizing Thermal Control with the Particle Swarm Optimization Algorithm and an Artificial Neural Network
The thermal management of proton exchange membrane fuel cell systems plays a significant role in a stack’s lifetime, performance, and reliability. However, it is challenging to manage the thermal system precisely due to the multiple coupling relationships between the stack’s components, its operating environment, and its thermal management system. In addition, temperature hysteresis (temporal inconsistency of temperature with electrochemical reactions and fluid mechanics) imposes more difficulties on thermal control. We aim to develop an effective thermal control model for the fuel cell system to improve the temperature regulation accuracy and response speed and thus achieve highly stable temperature control. A dynamic mechanistic model is first developed based on the physical processes of the stack and its thermal management system. The model is then validated through experiments. Based on this dynamic mechanistic model, a control model is proposed for stack thermal management with the particle swarm optimization algorithm and an artificial neural network. It is applied and compared with the traditional PID algorithm. The simulation results indicate that the regulation time of the coolant inlet temperature as the current changes is reduced by more than 74%, and the overshoot is reduced by more than 50%. Therefore, the control model can enhance the dynamic response capability and temperature control precision under complex operating conditions with constantly changing load current and preset stack temperature, ensuring the temperature’s stability and thus improving the fuel cell system’s reliability and durability.
- 10 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 327, 101-106
Shut-down Strategy of PEMFC Power System Based on Pulse Current Control Method
The proton exchange membrane fuel cell (PEMFC) power system operates under a variety of conditions due to changes in load demand, among which the shutdown process and shutdown state are the key factors that affect the system's health state and economics. Therefore, it is of great significance to explore a reasonable shutdown strategy for the healthy and reliable operation of the system. In this paper, a pulse current control method is proposed to release the residual energy and maintain the system shutdown state within the range of low voltage and safe pressure during the shutdown process, in view of the cell voltage and pressure operation characteristics and the ideal state requirements for cell voltage and pressure during the shutdown process. The method is crucial for the power system to swiftly maintain the ideal state during a short or long downtime through mechanism and data model simulation of reactant supply, and the analysis of shutdown test experiments.
- 10 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 327, 101-106
Shut-down Strategy of PEMFC Power System Based on Pulse Current Control Method
The proton exchange membrane fuel cell (PEMFC) power system operates under a variety of conditions due to changes in load demand, among which the shutdown process and shutdown state are the key factors that affect the system's health state and economics. Therefore, it is of great significance to explore a reasonable shutdown strategy for the healthy and reliable operation of the system. In this paper, a pulse current control method is proposed to release the residual energy and maintain the system shutdown state within the range of low voltage and safe pressure during the shutdown process, in view of the cell voltage and pressure operation characteristics and the ideal state requirements for cell voltage and pressure during the shutdown process. The method is crucial for the power system to swiftly maintain the ideal state during a short or long downtime through mechanism and data model simulation of reactant supply, and the analysis of shutdown test experiments.
- Open Access
- 15 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11602
A Dimension-Reduced Artificial Neural Network Model for the Cell Voltage Consistency Prediction of a Proton Exchange Membrane Fuel Cell Stack
The voltage consistency of hundreds of cells in a proton exchange membrane fuel cell stack significantly influences the stack’s performance and lifetime. Using the physics-based model to estimate the cell voltage consistency is highly challenging due to the massive calculation efforts and the complicated fuel cell designs. In this research, an artificial neural network (ANN) model is developed to efficiently predict the cell voltage distribution and the consistency of a commercial-size fuel cell stack. To balance the computation efficiency and accuracy, a dimension-reduced method is proposed with different output-grouping strategies to optimize the ANN structure based on the experiment test of a 100-cell stack. The model’s training time falls nonlinearly from 16 min to 6 s with the output neuron number decreasing from 100 to 5, while the model can still predict the cell voltage distribution trends. With the proposed model, the stack’s cell voltage distributions could be reproduced with significantly lowered computation time, which is beneficial to evaluate the fuel cell status and optimize the control strategies.
- 15 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11602
Open AccessA Dimension-Reduced Artificial Neural Network Model for the Cell Voltage Consistency Prediction of a Proton Exchange Membrane Fuel Cell Stack
The voltage consistency of hundreds of cells in a proton exchange membrane fuel cell stack significantly influences the stack’s performance and lifetime. Using the physics-based model to estimate the cell voltage consistency is highly challenging due to the massive calculation efforts and the complicated fuel cell designs. In this research, an artificial neural network (ANN) model is developed to efficiently predict the cell voltage distribution and the consistency of a commercial-size fuel cell stack. To balance the computation efficiency and accuracy, a dimension-reduced method is proposed with different output-grouping strategies to optimize the ANN structure based on the experiment test of a 100-cell stack. The model’s training time falls nonlinearly from 16 min to 6 s with the output neuron number decreasing from 100 to 5, while the model can still predict the cell voltage distribution trends. With the proposed model, the stack’s cell voltage distributions could be reproduced with significantly lowered computation time, which is beneficial to evaluate the fuel cell status and optimize the control strategies.
- 1 August 2022
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 46 (33) , 16138-16150
Axial ligand engineering for highly efficient oxygen reduction catalysts in transition metal–N 4 doped graphene
Developing highly efficient and stable electrocatalysts for oxygen reduction reaction (ORR) is a challenging task in energy conversion technologies. In this work, diverse axial ligands have been used to modify the ORR activity of transition metal and nitrogen codoped graphene (MN4-Gra). The weakening of the ORR intermediates by the axial ligand would activate these intermediates efficiently and improve the catalytic activity. Our study indicated that among the axial ligands adopted, nitrobenzene and benzene have good performance in improving the ORR activity. Several promising ORR catalysts are predicted. Among them, FeN4-Gra modified by nitrobenzene, i.e., FeN4-Gra/ben/NO2 has the best catalytic activity with a small overpotential of 0.21 V and energy barrier of 0.24 eV in the rate determining step, followed by RuN4-Gra/ben/NO2 and FeN4-Gra/benzene. These catalysts are also demonstrated to be stable by the calculated formation energies and dissolution potentials. The scaling relationships suggested that the adsorption energy of *OH and d band center would be good descriptors for predicting the highly efficient ORR catalysts. Therefore, axial ligand engineering would be a useful strategy to enhance the efficiency of ORR catalysts.
- 1 August 2022
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 46 (33) , 16138-16150
Axial ligand engineering for highly efficient oxygen reduction catalysts in transition metal–N 4 doped graphene
Developing highly efficient and stable electrocatalysts for oxygen reduction reaction (ORR) is a challenging task in energy conversion technologies. In this work, diverse axial ligands have been used to modify the ORR activity of transition metal and nitrogen codoped graphene (MN4-Gra). The weakening of the ORR intermediates by the axial ligand would activate these intermediates efficiently and improve the catalytic activity. Our study indicated that among the axial ligands adopted, nitrobenzene and benzene have good performance in improving the ORR activity. Several promising ORR catalysts are predicted. Among them, FeN4-Gra modified by nitrobenzene, i.e., FeN4-Gra/ben/NO2 has the best catalytic activity with a small overpotential of 0.21 V and energy barrier of 0.24 eV in the rate determining step, followed by RuN4-Gra/ben/NO2 and FeN4-Gra/benzene. These catalysts are also demonstrated to be stable by the calculated formation energies and dissolution potentials. The scaling relationships suggested that the adsorption energy of *OH and d band center would be good descriptors for predicting the highly efficient ORR catalysts. Therefore, axial ligand engineering would be a useful strategy to enhance the efficiency of ORR catalysts.
- 1 November 2021
- Published by Elsevier in Journal of Power Sources
- Vol. 512
Prediction of voltage degradation trend for a proton exchange membrane fuel cell city bus on roads
- 1 November 2021
- Published by Elsevier in Journal of Power Sources
- Vol. 512
Prediction of voltage degradation trend for a proton exchange membrane fuel cell city bus on roads
- 1 September 2021
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (24)
Searching for highly efficient multifunctional electrocatalysts based on the single metal doped graphitic carbon nitride
Multifunctional catalysts with highly efficient oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are in great demand for energy conversion and storage devices. In this study, based on a series of single transition metal atom anchored graphitic carbon nitride (g-CN) monolayer (TM@g-CN, TM = Fe-Cu, Ru-Ag), possible multifunctional electrocatalysts are screened out by using the density functional method. Our results demonstrated that Pd@g-CN is an excellent trifunctional catalyst with small overpotentials of 0.41/0.19/−0.28 V for ORR/OER/HER. For Cu@g-CN and Rh@g-CN, they show bifunctional activity toward OER and HER. For Cu@g-CN, the overpotentials are 0.38/−0.25 V for OER/HER, while they are 0.34/−0.22 V for Rh@g-CN. The adsorption strength of the intermediate *OH is a good descriptor for ORR and OER. These results suggest that the single transition metal atom anchored g-CN would be promising multifunctional catalysts and could provide useful guidance for their practical applications. Pd@g-CN exhibits promising catalytic performance toward ORR/OER/HER with the overpotentials of 0.41/0.19/-0.28 V GRAPHICAL ABSTRACT
- 1 September 2021
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (24)
Searching for highly efficient multifunctional electrocatalysts based on the single metal doped graphitic carbon nitride
Multifunctional catalysts with highly efficient oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are in great demand for energy conversion and storage devices. In this study, based on a series of single transition metal atom anchored graphitic carbon nitride (g-CN) monolayer (TM@g-CN, TM = Fe-Cu, Ru-Ag), possible multifunctional electrocatalysts are screened out by using the density functional method. Our results demonstrated that Pd@g-CN is an excellent trifunctional catalyst with small overpotentials of 0.41/0.19/−0.28 V for ORR/OER/HER. For Cu@g-CN and Rh@g-CN, they show bifunctional activity toward OER and HER. For Cu@g-CN, the overpotentials are 0.38/−0.25 V for OER/HER, while they are 0.34/−0.22 V for Rh@g-CN. The adsorption strength of the intermediate *OH is a good descriptor for ORR and OER. These results suggest that the single transition metal atom anchored g-CN would be promising multifunctional catalysts and could provide useful guidance for their practical applications. Pd@g-CN exhibits promising catalytic performance toward ORR/OER/HER with the overpotentials of 0.41/0.19/-0.28 V GRAPHICAL ABSTRACT
- 26 April 2021
- Published by Springer Nature in Automotive Innovation
- Vol. 4 (2) , 1-11
Experimental Investigation on Local Behaviors of PEMFC with Segmented Cell
- 26 April 2021
- Published by Springer Nature in Automotive Innovation
- Vol. 4 (2) , 1-11
Experimental Investigation on Local Behaviors of PEMFC with Segmented Cell
- 14 September 2020
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (4) , e1817593
Theoretical study on the two-dimensional bis(iminothiolato)rhodium as oxygen reduction reaction catalyst
Metal–organic porous materials provide a feasible strategy for designing electrocatalysts due to high surface area and well-defined porous structures. Herein, the catalytic activity and reaction mechanism for oxygen reduction reaction (ORR) on bis(iminothiolato)rhodium (RhIT) monolayer have been investigated by means of density functional theory. Our results indicate that *OOH hydrogenation to form *OH + *OH pathway is the kinetically most favourable pathway. The formation of two *OH intermediates is the rate-determining step with an energy barrier of 0.89 eV, close to 0.80 eV for pure Pt catalyst. The calculated working potential is 0.79 V, which is also close to 0.78 V for pure Pt. Thus, RhIT could be a potential ORR catalyst. We expect that the results of this work can offer fundamental insights for the design of highly efficient ORR catalysts by two-dimensional MOFs materials.
- 14 September 2020
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (4) , e1817593
Theoretical study on the two-dimensional bis(iminothiolato)rhodium as oxygen reduction reaction catalyst
Metal–organic porous materials provide a feasible strategy for designing electrocatalysts due to high surface area and well-defined porous structures. Herein, the catalytic activity and reaction mechanism for oxygen reduction reaction (ORR) on bis(iminothiolato)rhodium (RhIT) monolayer have been investigated by means of density functional theory. Our results indicate that *OOH hydrogenation to form *OH + *OH pathway is the kinetically most favourable pathway. The formation of two *OH intermediates is the rate-determining step with an energy barrier of 0.89 eV, close to 0.80 eV for pure Pt catalyst. The calculated working potential is 0.79 V, which is also close to 0.78 V for pure Pt. Thus, RhIT could be a potential ORR catalyst. We expect that the results of this work can offer fundamental insights for the design of highly efficient ORR catalysts by two-dimensional MOFs materials.
- 3 July 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (28) , 12299-12306
Theoretical study of two-dimensional bis(iminothiolato)metal monolayers as promising electrocatalysts for carbon dioxide reduction
MnIT is a good CO2RR catalyst for HCOOH production and CO poisoning is prohibited.
- 3 July 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (28) , 12299-12306
Theoretical study of two-dimensional bis(iminothiolato)metal monolayers as promising electrocatalysts for carbon dioxide reduction
MnIT is a good CO2RR catalyst for HCOOH production and CO poisoning is prohibited.