Chao Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Chao Wu has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Yang Cao
Electrical Insulation Research Center, Institute of Materials Science, University of Connecticut, Storrs, CT 06269, USA
5 shared publications Jierui Zhou
Electrical and Computer Engineering University of Connecticut Storrs CT 06269 USA
4 shared publications- Rampi Ramprasad
Georgia Institute of Technology
4 shared publications Zongze Li
Electrical Insulation Research Center University of Connecticut 97 N Eagleville Rd Storrs CT 06269 USA
4 shared publicationsAjinkya Deshmukh
Institute of Materials Science University of Connecticut Storrs CT 06269 USA
3 shared publicationsGregory Sotzing
Department of Chemistry University of Connecticut Storrs CT 06269 USA
3 shared publications
Latest Publications
- 22 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (25)
Microstructural conduction properties of the electrical discharge channels within decay-like degraded FRP rod
Tree-like discharge erosion channels within the fiber-reinforced plastic rod are prominent feature of decay-like degraded composite insulators, and their electrical properties remain insufficiently understood. This study investigates the microstructural electrical conductivity and chemical composition of discharge erosion channels within a decay-like degraded core rod. A cross-sectional sample exposing a discharge channel was prepared using ion beam polishing. The electrical properties were characterized using tunneling atomic force microscopy (TUNA) under different humidity levels, while chemical changes were analyzed via in situ Raman spectroscopy and mapping. The TUNA results revealed a significant current increase within the discharge channel. The estimated channel conductivity is on the order of 3 × 10−8 and 10−4 S/m under low and high humidity, respectively. The porous microstructure within channel likely facilitates capillary condensation of water vapor, creating an ionic conductive path along the fiber direction via the condensed water film. Tree-like microstructure is attributed to partial discharge erosion, while humidity-dependent capillary condensation is proposed to activate ionic conduction, further facilitating discharges. Raman spectroscopy showed a substantial decrease in characteristic peaks of the epoxy resin within the channel, indicating severe polymer decomposition. Critically, the absence of D and G bands suggests that carbonization is unlikely to be the dominant conduction mechanism. Ion chromatography confirmed the presence of nitrate and multiple carboxylic acid anions, and the enhanced conductivity is therefore attributed primarily to dissolved ionic species transporting through capillary-condensed water within the porous channels.
- 22 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (25)
Microstructural conduction properties of the electrical discharge channels within decay-like degraded FRP rod
Tree-like discharge erosion channels within the fiber-reinforced plastic rod are prominent feature of decay-like degraded composite insulators, and their electrical properties remain insufficiently understood. This study investigates the microstructural electrical conductivity and chemical composition of discharge erosion channels within a decay-like degraded core rod. A cross-sectional sample exposing a discharge channel was prepared using ion beam polishing. The electrical properties were characterized using tunneling atomic force microscopy (TUNA) under different humidity levels, while chemical changes were analyzed via in situ Raman spectroscopy and mapping. The TUNA results revealed a significant current increase within the discharge channel. The estimated channel conductivity is on the order of 3 × 10−8 and 10−4 S/m under low and high humidity, respectively. The porous microstructure within channel likely facilitates capillary condensation of water vapor, creating an ionic conductive path along the fiber direction via the condensed water film. Tree-like microstructure is attributed to partial discharge erosion, while humidity-dependent capillary condensation is proposed to activate ionic conduction, further facilitating discharges. Raman spectroscopy showed a substantial decrease in characteristic peaks of the epoxy resin within the channel, indicating severe polymer decomposition. Critically, the absence of D and G bands suggests that carbonization is unlikely to be the dominant conduction mechanism. Ion chromatography confirmed the presence of nitrate and multiple carboxylic acid anions, and the enhanced conductivity is therefore attributed primarily to dissolved ionic species transporting through capillary-condensed water within the porous channels.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Revealing the nature of frequency-dependent breakdown characteristics for typical polymer insulating films
Polymer dielectrics are critical for the reliable operation of electrical equipment under high field strength and high frequency. The degradation of breakdown performance at high-frequency AC fields has been noticed in polymer dielectrics, while the underlying mechanism remains unrevealed. Here, systematic experiments as well as first-principles calculations are combined to illustrate the correlation between the intrinsic material properties and the electrical insulating performance, including the energy bandgap Eg, glass transition temperature Tg, and dielectric dissipation factor tanδ. The results demonstrate that Eg predominantly governs the intrinsic DC breakdown strength, tanδ is the key driver of the heat generation under high-frequency conditions, and Tg underpins the heat endurance. They together determine the frequency-dependent breakdown performance. This research provides insights into the core intrinsic factors of high-frequency insulation reliability and offers guidance for selecting quantifiable and intrinsic proxy properties for the design and development of polymer-based insulating polymers.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Revealing the nature of frequency-dependent breakdown characteristics for typical polymer insulating films
Polymer dielectrics are critical for the reliable operation of electrical equipment under high field strength and high frequency. The degradation of breakdown performance at high-frequency AC fields has been noticed in polymer dielectrics, while the underlying mechanism remains unrevealed. Here, systematic experiments as well as first-principles calculations are combined to illustrate the correlation between the intrinsic material properties and the electrical insulating performance, including the energy bandgap Eg, glass transition temperature Tg, and dielectric dissipation factor tanδ. The results demonstrate that Eg predominantly governs the intrinsic DC breakdown strength, tanδ is the key driver of the heat generation under high-frequency conditions, and Tg underpins the heat endurance. They together determine the frequency-dependent breakdown performance. This research provides insights into the core intrinsic factors of high-frequency insulation reliability and offers guidance for selecting quantifiable and intrinsic proxy properties for the design and development of polymer-based insulating polymers.
- 11 June 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (52) , e2402133
Pendant Group Functionalization of Cyclic Olefin for High Temperature and High‐Density Energy Storage
High‐temperature flexible polymer dielectrics are critical for high density energy storage and conversion. The need to simultaneously possess a high bandgap, dielectric constant and glass transition temperature forms a substantial design challenge for novel dielectric polymers. Here, by varying halogen substituents of an aromatic pendant hanging off a bicyclic mainchain polymer, a class of high‐temperature olefins with adjustable thermal stability are obtained, all with uncompromised large bandgaps. Halogens substitution of the pendant groups at para or ortho position of polyoxanorborneneimides (PONB) imparts it with tunable high glass transition from 220 to 245 °C, while with high breakdown strength of 625–800 MV/m. A high energy density of 7.1 J/cc at 200 °C is achieved with p‐POClNB, representing the highest energy density reported among homo‐polymers. Molecular dynamic simulations and ultrafast infrared spectroscopy are used to probe the free volume element distribution and chain relaxations pertinent to dielectric thermal properties. An increase in free volume element is observed with the change in the pendant group from fluorine to bromine at the para position; however, smaller free volume element is observed for the same pendant when at the ortho position due to steric hindrance. With the dielectric constant and bandgap remaining stable, properly designing the pendant groups of PONB boosts its thermal stability for high density electrification.
- 11 June 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (52) , e2402133
Pendant Group Functionalization of Cyclic Olefin for High Temperature and High‐Density Energy Storage
High‐temperature flexible polymer dielectrics are critical for high density energy storage and conversion. The need to simultaneously possess a high bandgap, dielectric constant and glass transition temperature forms a substantial design challenge for novel dielectric polymers. Here, by varying halogen substituents of an aromatic pendant hanging off a bicyclic mainchain polymer, a class of high‐temperature olefins with adjustable thermal stability are obtained, all with uncompromised large bandgaps. Halogens substitution of the pendant groups at para or ortho position of polyoxanorborneneimides (PONB) imparts it with tunable high glass transition from 220 to 245 °C, while with high breakdown strength of 625–800 MV/m. A high energy density of 7.1 J/cc at 200 °C is achieved with p‐POClNB, representing the highest energy density reported among homo‐polymers. Molecular dynamic simulations and ultrafast infrared spectroscopy are used to probe the free volume element distribution and chain relaxations pertinent to dielectric thermal properties. An increase in free volume element is observed with the change in the pendant group from fluorine to bromine at the para position; however, smaller free volume element is observed for the same pendant when at the ortho position due to steric hindrance. With the dielectric constant and bandgap remaining stable, properly designing the pendant groups of PONB boosts its thermal stability for high density electrification.
- 20 January 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (52) , e2310497
Probing Electronic Band Structures of Dielectric Polymers via Pre‐Breakdown Conduction
The electronic band structure, especially the defect states at the conduction band tail, dominates electron transport and electrical degradation of a dielectric material under an extremely high electric field. However, the electronic band structure in a dielectric is barely well studied due to experimental challenges in detecting the electrical conduction to an extremely high electric field, i.e., prebreakdown. In this work, the electronic band structure of polymer dielectric films is probed through an in situ prebreakdown conduction measurement method in conjunction with a space‐charge‐limited‐current spectroscopic analysis. An exponential distribution of defect states at the conduction band tail with varying trap levels is observed in accordance with the specific morphological disorder in the polymer dielectric, and the experimental defect states show also a favorable agreement with the calculated density of states from the density functional theory. The methodology demonstrated in this work bridges the molecule‐structure‐determined electronic band structure and the macro electrical conduction behavior with a highly improved understanding of material properties that control the electrical breakdown, and paves a way for guiding the modification of existing material and the exploration of novel materials for high electric field applications.
- 20 January 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (52) , e2310497
Probing Electronic Band Structures of Dielectric Polymers via Pre‐Breakdown Conduction
The electronic band structure, especially the defect states at the conduction band tail, dominates electron transport and electrical degradation of a dielectric material under an extremely high electric field. However, the electronic band structure in a dielectric is barely well studied due to experimental challenges in detecting the electrical conduction to an extremely high electric field, i.e., prebreakdown. In this work, the electronic band structure of polymer dielectric films is probed through an in situ prebreakdown conduction measurement method in conjunction with a space‐charge‐limited‐current spectroscopic analysis. An exponential distribution of defect states at the conduction band tail with varying trap levels is observed in accordance with the specific morphological disorder in the polymer dielectric, and the experimental defect states show also a favorable agreement with the calculated density of states from the density functional theory. The methodology demonstrated in this work bridges the molecule‐structure‐determined electronic band structure and the macro electrical conduction behavior with a highly improved understanding of material properties that control the electrical breakdown, and paves a way for guiding the modification of existing material and the exploration of novel materials for high electric field applications.
- Open Access
- 13 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (37) , 42705-42712
Ion-Boosting the Charge Density and Piezoelectric Response of Ferroelectrets to Significantly High Levels
In contrast to molecular-dipole polymers, such as PVDF, ferroelectrets are a new class of flexible spatially heterogeneous piezoelectric polymers with closed or open voids that act as deformable macro-dipoles after charging. With a spectrum of manufacturing processes being developed to engineer the heterogeneous structures, ferroelectrets are made with attractive piezoelectric properties well-suited for applications, such as pressure sensors, acoustic transducers, etc. However, the sources of the macro-dipole charges have usually been the same, microscopic dielectric barrier discharges within the voids, induced when the ferroelectrets are poled under a large electric field typically via a so-called corona poling, resulting in the separation and trapping of opposite charges into the interior walls of the voids. Such a process is inherently self-limiting, as the reverse internal field from the macro-dipoles eventually extinguishes the microdischarges, resulting in limited density of ions and not too high overall piezoelectric performance. Here, a new method to form ferroelectrets with gigantic electroactivity is proposed and demonstrated with the aid of an external ion booster. A laminate consisting of expanded polytetrafluoroethylene (ePTFE) and fluorinated-ethylene-propylene (FEP) was prefilled with bipolar ions produced externally by an ionizer and sequentially poled to force the separation of positive and negative ions into the open fibrous structure, rendering an impressive piezoelectric d33 coefficient of 1600 pC/N─an improvement by a factor of 4 in comparison with the d33 of a similar sandwich poled with nonenhanced corona poling. The (pre)filling clearly increases the ion density in the open voids significantly. The charges stored in the open-cell structure stays at a high level for at least 4 months. In addition, an all-organic nanogenerator was made from an ePTFE-based ferroelectret, with conducting poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) coated fabric electrodes. When poled with this ion-boosting process, it yielded an output power twice that of a similar sample poled in a conventional corona-only process. The doubling in output power is mainly brought about by the significantly higher charge density achieved with the aid of external booster. Furthermore, aside from the bipolar ions, extra monopolar ions can during the corona poling be blown into the open pores by using for instance a negative ionic hair dryer to produce a unipolar ePTFE-based ferroelectret with its d33 coefficient enhanced by a factor of 3. Ion-boosting poling thus unleashes a new route to produce bipolar or unipolar open-cell ferroelectrets with highly enhanced piezoelectric response.
- 13 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (37) , 42705-42712
Open AccessIon-Boosting the Charge Density and Piezoelectric Response of Ferroelectrets to Significantly High Levels
In contrast to molecular-dipole polymers, such as PVDF, ferroelectrets are a new class of flexible spatially heterogeneous piezoelectric polymers with closed or open voids that act as deformable macro-dipoles after charging. With a spectrum of manufacturing processes being developed to engineer the heterogeneous structures, ferroelectrets are made with attractive piezoelectric properties well-suited for applications, such as pressure sensors, acoustic transducers, etc. However, the sources of the macro-dipole charges have usually been the same, microscopic dielectric barrier discharges within the voids, induced when the ferroelectrets are poled under a large electric field typically via a so-called corona poling, resulting in the separation and trapping of opposite charges into the interior walls of the voids. Such a process is inherently self-limiting, as the reverse internal field from the macro-dipoles eventually extinguishes the microdischarges, resulting in limited density of ions and not too high overall piezoelectric performance. Here, a new method to form ferroelectrets with gigantic electroactivity is proposed and demonstrated with the aid of an external ion booster. A laminate consisting of expanded polytetrafluoroethylene (ePTFE) and fluorinated-ethylene-propylene (FEP) was prefilled with bipolar ions produced externally by an ionizer and sequentially poled to force the separation of positive and negative ions into the open fibrous structure, rendering an impressive piezoelectric d33 coefficient of 1600 pC/N─an improvement by a factor of 4 in comparison with the d33 of a similar sandwich poled with nonenhanced corona poling. The (pre)filling clearly increases the ion density in the open voids significantly. The charges stored in the open-cell structure stays at a high level for at least 4 months. In addition, an all-organic nanogenerator was made from an ePTFE-based ferroelectret, with conducting poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) coated fabric electrodes. When poled with this ion-boosting process, it yielded an output power twice that of a similar sample poled in a conventional corona-only process. The doubling in output power is mainly brought about by the significantly higher charge density achieved with the aid of external booster. Furthermore, aside from the bipolar ions, extra monopolar ions can during the corona poling be blown into the open pores by using for instance a negative ionic hair dryer to produce a unipolar ePTFE-based ferroelectret with its d33 coefficient enhanced by a factor of 3. Ion-boosting poling thus unleashes a new route to produce bipolar or unipolar open-cell ferroelectrets with highly enhanced piezoelectric response.
- 12 July 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (14) , 6553-6558
Improving the Rotational Freedom of Polyetherimide: Enhancement of the Dielectric Properties of a Commodity High-Temperature Polymer Using a Structural Defect
- 12 July 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 34 (14) , 6553-6558
Improving the Rotational Freedom of Polyetherimide: Enhancement of the Dielectric Properties of a Commodity High-Temperature Polymer Using a Structural Defect
- 30 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 3 (12) , 6027-6033
Highly Conductive Liquid Metal-Based Shape Memory Material with an Ultrasensitive Fire Warning Response
- 30 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 3 (12) , 6027-6033
Highly Conductive Liquid Metal-Based Shape Memory Material with an Ultrasensitive Fire Warning Response
- 14 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (38) , 46142-46150
Tuning Surface States of Metal/Polymer Contacts Toward Highly Insulating Polymer-Based Dielectrics
Metal–polymer interface plays a crucial role in controlling the dielectric performance in all flexible electronics. Ideally, the formation of the Schottky barrier due to the large band offset of the electron affinity of the polymer over the work function of the electrode should sufficiently impede the charge injection. Arguably, however, such an injection barrier has hardly been indisputably verified in polymer–metal junctions due to the ever-existing surface states, which dramatically compromise the barrier thus leading to undesired high electrical conduction. Here, we demonstrate experimentally a clear negative correlation between the breakdown strength and the density of surface states in polymer dielectrics. The existence of surface states reduces the effective barrier height for charge injection, as further revealed by density functional theory calculations and photoinjection current measurements. Based on these findings, we present a surface engineering method to enhance the breakdown strength with the application of nanocoatings on polymer films to eliminate surface states. The density of surface states is reduced by 2 orders of magnitude when the polymer is coated with a layer of two-dimensional hexagonal boron nitride nanosheets, leading to about 100% enhancement of breakdown strength. This work reveals the critical role played by surface states on electrical breakdown and provides a versatile surface engineering strategy to curtail surface states, broadly applicable for all polymer dielectrics.
- 14 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (38) , 46142-46150
Tuning Surface States of Metal/Polymer Contacts Toward Highly Insulating Polymer-Based Dielectrics
Metal–polymer interface plays a crucial role in controlling the dielectric performance in all flexible electronics. Ideally, the formation of the Schottky barrier due to the large band offset of the electron affinity of the polymer over the work function of the electrode should sufficiently impede the charge injection. Arguably, however, such an injection barrier has hardly been indisputably verified in polymer–metal junctions due to the ever-existing surface states, which dramatically compromise the barrier thus leading to undesired high electrical conduction. Here, we demonstrate experimentally a clear negative correlation between the breakdown strength and the density of surface states in polymer dielectrics. The existence of surface states reduces the effective barrier height for charge injection, as further revealed by density functional theory calculations and photoinjection current measurements. Based on these findings, we present a surface engineering method to enhance the breakdown strength with the application of nanocoatings on polymer films to eliminate surface states. The density of surface states is reduced by 2 orders of magnitude when the polymer is coated with a layer of two-dimensional hexagonal boron nitride nanosheets, leading to about 100% enhancement of breakdown strength. This work reveals the critical role played by surface states on electrical breakdown and provides a versatile surface engineering strategy to curtail surface states, broadly applicable for all polymer dielectrics.
- 26 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (45) , 53416-53424
Dielectric Polymers Tolerant to Electric Field and Temperature Extremes: Integration of Phenomenology, Informatics, and Experimental Validation
Flexible polymer dielectrics tolerant to electric field and temperature extremes are urgently needed for a spectrum of electrical and electronic applications. Given the complexity of the dielectric breakdown mechanism and the vast chemical space of polymers, the discovery of suitable candidates is nontrivial. We have laid the foundation for a systematic search of the polymer chemical space, which starts with “gold-standard” experimental measurements and data on the temperature-dependent breakdown strength (Ebd) for a benchmark set of commercial dielectric polymer films. Phenomenological guidelines are derived from this data set on easily accessible properties (or “proxies”) that are correlated with Ebd. Screening criteria based on these proxy properties (e.g., band gap, charge injection barrier, and cohesive energy density) and other necessary characteristics (e.g., a high glass transition temperature to maintain the thermal stability and a high dielectric constant for high energy density) were then setup. These criteria, along with machine learning models of these properties, were used to screen polymers candidates from a candidate list of more than 13 000 previously synthesized polymers, followed by experimental validation of some of the screened candidates. These efforts have led to the creation of a consistent and high-quality data set of temperature-dependent Ebd, and the identification of screening criteria, chemical design rules, and a list of optimal polymer candidates for high-temperature and high-energy-density capacitor applications, thus demonstrating the power of an integrated and informatics-based philosophy for rational materials design.
- 26 August 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (45) , 53416-53424
Dielectric Polymers Tolerant to Electric Field and Temperature Extremes: Integration of Phenomenology, Informatics, and Experimental Validation
Flexible polymer dielectrics tolerant to electric field and temperature extremes are urgently needed for a spectrum of electrical and electronic applications. Given the complexity of the dielectric breakdown mechanism and the vast chemical space of polymers, the discovery of suitable candidates is nontrivial. We have laid the foundation for a systematic search of the polymer chemical space, which starts with “gold-standard” experimental measurements and data on the temperature-dependent breakdown strength (Ebd) for a benchmark set of commercial dielectric polymer films. Phenomenological guidelines are derived from this data set on easily accessible properties (or “proxies”) that are correlated with Ebd. Screening criteria based on these proxy properties (e.g., band gap, charge injection barrier, and cohesive energy density) and other necessary characteristics (e.g., a high glass transition temperature to maintain the thermal stability and a high dielectric constant for high energy density) were then setup. These criteria, along with machine learning models of these properties, were used to screen polymers candidates from a candidate list of more than 13 000 previously synthesized polymers, followed by experimental validation of some of the screened candidates. These efforts have led to the creation of a consistent and high-quality data set of temperature-dependent Ebd, and the identification of screening criteria, chemical design rules, and a list of optimal polymer candidates for high-temperature and high-energy-density capacitor applications, thus demonstrating the power of an integrated and informatics-based philosophy for rational materials design.