Sheyda Mirjalali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sheyda Mirjalali has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Shuying Wu
School of Aerospace Mechanical and Mechatronic Engineering The University of Sydney Sydney New South Wales Australia
5 shared publications Shuhua Peng
School of Mechanical and Manufacturing Engineering University of New South Wales Sydney NSW 2052 Australia
4 shared publicationsChun‐Hui Wang
School of Mechanical and Manufacturing Engineering University of New South Wales Sydney NSW 2052 Australia
3 shared publicationsMohsen Asadnia
School of Engineering Macquarie University Sydney NSW 2109 Australia
2 shared publicationsShayan Abrishami
Institute for Advanced Textile Materials and Technologies Amirkabir University of Technology Tehran 1591634311 Iran
2 shared publicationsShujuan Huang
School of Engineering Macquarie University Sydney NSW 2109 Australia
2 shared publications
Latest Publications
- Open Access
- 1 September 2023
- Published by AIP Publishing in Biomicrofluidics
- Vol. 17 (5) , 051504
A review on inertial microfluidic fabrication methods
In recent decades, there has been significant interest in inertial microfluidics due to its high throughput, ease of fabrication, and no need for external forces. The focusing efficiency of inertial microfluidic systems relies entirely on the geometrical features of microchannels because hydrodynamic forces (inertial lift forces and Dean drag forces) are the main driving forces in inertial microfluidic devices. In the past few years, novel microchannel structures have been propounded to improve particle manipulation efficiency. However, the fabrication of these unconventional structures has remained a serious challenge. Although researchers have pushed forward the frontiers of microfabrication technologies, the fabrication techniques employed for inertial microfluidics have not been discussed comprehensively. This review introduces the microfabrication approaches used for creating inertial microchannels, including photolithography, xurography, laser cutting, micromachining, microwire technique, etching, hot embossing, 3D printing, and injection molding. The advantages and disadvantages of these methods have also been discussed. Then, the techniques are reviewed regarding resolution, structures, cost, and materials. This review provides a thorough insight into the manufacturing methods of inertial microchannels, which could be helpful for future studies to improve the harvesting yield and resolution by choosing a proper fabrication technique.
- 1 September 2023
- Published by AIP Publishing in Biomicrofluidics
- Vol. 17 (5) , 051504
Open AccessA review on inertial microfluidic fabrication methods
In recent decades, there has been significant interest in inertial microfluidics due to its high throughput, ease of fabrication, and no need for external forces. The focusing efficiency of inertial microfluidic systems relies entirely on the geometrical features of microchannels because hydrodynamic forces (inertial lift forces and Dean drag forces) are the main driving forces in inertial microfluidic devices. In the past few years, novel microchannel structures have been propounded to improve particle manipulation efficiency. However, the fabrication of these unconventional structures has remained a serious challenge. Although researchers have pushed forward the frontiers of microfabrication technologies, the fabrication techniques employed for inertial microfluidics have not been discussed comprehensively. This review introduces the microfabrication approaches used for creating inertial microchannels, including photolithography, xurography, laser cutting, micromachining, microwire technique, etching, hot embossing, 3D printing, and injection molding. The advantages and disadvantages of these methods have also been discussed. Then, the techniques are reviewed regarding resolution, structures, cost, and materials. This review provides a thorough insight into the manufacturing methods of inertial microchannels, which could be helpful for future studies to improve the harvesting yield and resolution by choosing a proper fabrication technique.
- Open Access
A Comparative Study on the Effects of Spray Coating Methods and Substrates on Polyurethane/Carbon Nanofiber Sensors
Thermoplastic polyurethane (TPU) has been widely used as the elastic polymer substrate to be combined with conductive nanomaterials to develop stretchable strain sensors for a variety of applications such as health monitoring, smart robotics, and e-skins. However, little research has been reported on the effects of deposition methods and the form of TPU on their sensing performance. This study intends to design and fabricate a durable, stretchable sensor based on composites of thermoplastic polyurethane and carbon nanofibers (CNFs) by systematically investigating the influences of TPU substrates (i.e., either electrospun nanofibers or solid thin film) and spray coating methods (i.e., either air-spray or electro-spray). It is found that the sensors with electro-sprayed CNFs conductive sensing layers generally show a higher sensitivity, while the influence of the substrate is not significant and there is no clear and consistent trend. The sensor composed of a TPU solid thin film with electro-sprayed CNFs exhibits an optimal performance with a high sensitivity (gauge factor ~28.2) in a strain range of 0–80%, a high stretchability of up to 184%, and excellent durability. The potential application of these sensors in detecting body motions has been demonstrated, including finger and wrist-joint movements, by using a wooden hand.
Open AccessA Comparative Study on the Effects of Spray Coating Methods and Substrates on Polyurethane/Carbon Nanofiber Sensors
Thermoplastic polyurethane (TPU) has been widely used as the elastic polymer substrate to be combined with conductive nanomaterials to develop stretchable strain sensors for a variety of applications such as health monitoring, smart robotics, and e-skins. However, little research has been reported on the effects of deposition methods and the form of TPU on their sensing performance. This study intends to design and fabricate a durable, stretchable sensor based on composites of thermoplastic polyurethane and carbon nanofibers (CNFs) by systematically investigating the influences of TPU substrates (i.e., either electrospun nanofibers or solid thin film) and spray coating methods (i.e., either air-spray or electro-spray). It is found that the sensors with electro-sprayed CNFs conductive sensing layers generally show a higher sensitivity, while the influence of the substrate is not significant and there is no clear and consistent trend. The sensor composed of a TPU solid thin film with electro-sprayed CNFs exhibits an optimal performance with a high sensitivity (gauge factor ~28.2) in a strain range of 0–80%, a high stretchability of up to 184%, and excellent durability. The potential application of these sensors in detecting body motions has been demonstrated, including finger and wrist-joint movements, by using a wooden hand.
- Open Access
- 15 February 2023
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (8)
Multilayered Electrospun/Electrosprayed Polyvinylidene Fluoride+Zinc Oxide Nanofiber Mats with Enhanced Piezoelectricity
Electrospun polyvinylidene fluoride (PVDF) nanofibers have been widely used in the fabrication of flexible piezoelectric sensors and nanogenerators, due to their excellent mechanical properties. However, their relatively low piezoelectricity is still a critical issue. Herein, a new and effective route to enhance the piezoelectricity of PVDF nanofiber mats by electrospraying zinc oxide (ZnO) nanoparticles between layers of PVDF nanofibers is demonstrated. As compared to the conventional way of dispersing ZnO nanoparticles into PVDF solution for electrospinning nanofiber mats, this approach results in multilayered PVDF+ZnO nanofiber mats with significantly increased piezoelectricity. For example, 6.2 times higher output is achieved when 100% of ZnO (relative to PVDF quantity) is electrosprayed between PVDF nanofibers. Moreover, this new method enables higher loading of ZnO without having processing challenges and the maximum peak voltage of ≈3 V is achieved, when ZnO content increases up to 150%. Additionally, it is shown that the samples with equal amount of material but consisting of different number of layers have no significant difference. This work demonstrates that the proposed multilayer design provides an alternative strategy to enhance the piezoelectricity of PVDF nanofibers, which can be readily scaled up for mass production.
- 15 February 2023
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (8)
Open AccessMultilayered Electrospun/Electrosprayed Polyvinylidene Fluoride+Zinc Oxide Nanofiber Mats with Enhanced Piezoelectricity
Electrospun polyvinylidene fluoride (PVDF) nanofibers have been widely used in the fabrication of flexible piezoelectric sensors and nanogenerators, due to their excellent mechanical properties. However, their relatively low piezoelectricity is still a critical issue. Herein, a new and effective route to enhance the piezoelectricity of PVDF nanofiber mats by electrospraying zinc oxide (ZnO) nanoparticles between layers of PVDF nanofibers is demonstrated. As compared to the conventional way of dispersing ZnO nanoparticles into PVDF solution for electrospinning nanofiber mats, this approach results in multilayered PVDF+ZnO nanofiber mats with significantly increased piezoelectricity. For example, 6.2 times higher output is achieved when 100% of ZnO (relative to PVDF quantity) is electrosprayed between PVDF nanofibers. Moreover, this new method enables higher loading of ZnO without having processing challenges and the maximum peak voltage of ≈3 V is achieved, when ZnO content increases up to 150%. Additionally, it is shown that the samples with equal amount of material but consisting of different number of layers have no significant difference. This work demonstrates that the proposed multilayer design provides an alternative strategy to enhance the piezoelectricity of PVDF nanofibers, which can be readily scaled up for mass production.
- Open Access
- 1 January 2023
- Published by KEAI Publishing in Smart Materials in Manufacturing
- Vol. 1
Highly stretchable strain sensors based on gold thin film reinforced with carbon nanofibers
- 1 January 2023
- Published by KEAI Publishing in Smart Materials in Manufacturing
- Vol. 1
Open AccessHighly stretchable strain sensors based on gold thin film reinforced with carbon nanofibers
- Open Access
- 25 October 2022
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (1)
A Review on Wearable Electrospun Polymeric Piezoelectric Sensors and Energy Harvesters
In recent years, wearable sensors and energy harvesters have shown great potential for a wide range of applications in personalized healthcare, robotics, and human–machine interfaces. Among different types of materials used in wearable electronics, piezoelectric materials have gained enormous attention due to their exclusive ability to harvest energy from ambient sources. Piezoelectric materials can be utilized as sensing elements in wearable sensors while harvesting biomechanical energy. Electrospun piezoelectric polymer nanofibers are extensively investigated due to their high flexibility, ease of processing, biocompatibility, and higher piezoelectric property (in contrast to their corresponding cast films). However, as compared to piezoceramic materials, they mostly exhibit relatively lower piezoelectric coefficients. Therefore, considerable efforts have been devoted to improving the piezoelectricity of electrospun polymer nanofibers recently, resulting in significant advances. This review presents a broad overview of these advances including new material, structure designs as well as new strategies to enhance piezoelectricity of electrospun polymer nanofibers. The challenges in achieving high mechanical performance as well as high piezoelectricity are particularly discussed. The main motivation of this review is to examine these challenges and highlight effective approaches to achieving high‐performance piezoelectric sensors and energy harvesters for wearable technologies.
- 25 October 2022
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (1)
Open AccessA Review on Wearable Electrospun Polymeric Piezoelectric Sensors and Energy Harvesters
In recent years, wearable sensors and energy harvesters have shown great potential for a wide range of applications in personalized healthcare, robotics, and human–machine interfaces. Among different types of materials used in wearable electronics, piezoelectric materials have gained enormous attention due to their exclusive ability to harvest energy from ambient sources. Piezoelectric materials can be utilized as sensing elements in wearable sensors while harvesting biomechanical energy. Electrospun piezoelectric polymer nanofibers are extensively investigated due to their high flexibility, ease of processing, biocompatibility, and higher piezoelectric property (in contrast to their corresponding cast films). However, as compared to piezoceramic materials, they mostly exhibit relatively lower piezoelectric coefficients. Therefore, considerable efforts have been devoted to improving the piezoelectricity of electrospun polymer nanofibers recently, resulting in significant advances. This review presents a broad overview of these advances including new material, structure designs as well as new strategies to enhance piezoelectricity of electrospun polymer nanofibers. The challenges in achieving high mechanical performance as well as high piezoelectricity are particularly discussed. The main motivation of this review is to examine these challenges and highlight effective approaches to achieving high‐performance piezoelectric sensors and energy harvesters for wearable technologies.
- Top Cited PapersOpen Access
- 3 September 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (1) , 2100545
Wearable Sensors for Remote Health Monitoring: Potential Applications for Early Diagnosis of Covid‐19
Wearable sensors are emerging as a new technology to detect physiological and biochemical markers for remote health monitoring. By measuring vital signs such as respiratory rate, body temperature, and blood oxygen level, wearable sensors offer tremendous potential for the noninvasive and early diagnosis of numerous diseases such as Covid‐19. Over the past decade, significant progress has been made to develop wearable sensors with high sensitivity, accuracy, flexibility, and stretchability, bringing to reality a new paradigm of remote health monitoring. In this review paper, the latest advances in wearable sensor systems that can measure vital signs at an accuracy level matching those of point‐of‐care tests are presented. In particular, the focus of this review is placed on wearable sensors for measuring respiratory behavior, body temperature, and blood oxygen level, which are identified as the critical signals for diagnosing and monitoring Covid‐19. Various designs based on different materials and working mechanisms are summarized. This review is concluded by identifying the remaining challenges and future opportunities for this emerging field.
- 3 September 2021
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (1) , 2100545
Top Cited PapersOpen AccessWearable Sensors for Remote Health Monitoring: Potential Applications for Early Diagnosis of Covid‐19
Wearable sensors are emerging as a new technology to detect physiological and biochemical markers for remote health monitoring. By measuring vital signs such as respiratory rate, body temperature, and blood oxygen level, wearable sensors offer tremendous potential for the noninvasive and early diagnosis of numerous diseases such as Covid‐19. Over the past decade, significant progress has been made to develop wearable sensors with high sensitivity, accuracy, flexibility, and stretchability, bringing to reality a new paradigm of remote health monitoring. In this review paper, the latest advances in wearable sensor systems that can measure vital signs at an accuracy level matching those of point‐of‐care tests are presented. In particular, the focus of this review is placed on wearable sensors for measuring respiratory behavior, body temperature, and blood oxygen level, which are identified as the critical signals for diagnosing and monitoring Covid‐19. Various designs based on different materials and working mechanisms are summarized. This review is concluded by identifying the remaining challenges and future opportunities for this emerging field.