MSMehmet Seki

Mehmet Seki

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mehmet Seki has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Estimating Stand Carrying Capacity for Three Common Pine Species Across Various Regions of Türkiye

    by Mehmet Seki, Sheng-I Yang, Ahmet Duyar, Dimitrios I. Raptis, Davut Atar, Mustafa Kağan Özkal, Oytun Emre Sakici, Klaus von Gadow

    Sustainable management of forest ecosystems requires assessing forest dynamics and project stand growth and yield in order to make strategic decisions. The size–density relationship is one of the most important measures in quantifying the carrying capacity of a forest ecosystem and determining appropriate silvicultural decisions. In this study, the maximum stand density index (SDImax) was estimated for three common pine species in seven different ecological regions across Türkiye. Observations from 14,413 sample plots, including Calabrian pine (Pinus brutia Ten.; 6266 plots from five regions), Black pine (Pinus nigra J.F. Arnold; 6106 plots from five regions) and Scots pine (Pinus sylvestris L.; 2041 plots from three regions) forests were used in this study, covering the entire natural range of these three pine species. A mixed model with region as a random effect was developed for each species to estimate SDImax. Results show that the slope coefficients of the self-thinning lines vary by species and are significantly different from −1.605. The Scots pine stands exhibited the highest SDImax, followed by Black pine and Calabrian pine stands. Across seven ecological regions, the highest SDImax was observed in the Aegean region for Calabrian and Black pine and in the East Anatolia region for Scots pine. The arid Inner Anatolia region yielded the lowest SDImax for Black pine and Scots pine. The humid and semi-humid regions showed a higher SDImax compared to arid regions. The three pine species studied make up almost half of the total forest area in Türkiye. The results of the study are therefore very important in terms of quantitative assessment of the country’s forests. The differences in stand dynamics of these three pine species, which are also widely distributed outside Türkiye under different ecological conditions, may also be a relevant source of information for other regions. Moreover, considering that pine stands in dry environments have a lower carrying capacity than those in humid conditions, it seems likely that pine forests in Türkiye will be affected by increasing global warming.


  • Open Access

    Effects of Ecological Factors on Forest Site Productivity in Crimean Pine Stands of the Kastamonu Region

    by Mehmet Seki, Oytun Emre Sakıcı

    Aim of study: In this study, relationships between ecological factors including topography, climate, soil properties and site productivity of Crimean pine (Pinus nigra J.F. Arnold subsp. pallasiana (Lamb.) Holmboe) stands in the Kastamonu region of Türkiye were investigated. Area of study: The study was conducted in Crimean pine stands of Kastamonu region, northwestern Türkiye. Material and method: A total of thirty-six temporary sample plots inventoried from naturally regenerated pure Crimean pine stands were used in this study. Main results: Our results indicated that climatic factors including precipitation and temperature had the greatest relationship between site productivity. Since climatic factors showed significant differences between the low and high site index classes, they can be reliably used for site classification for this species in the region. Besides, Principal Component Analysis (PCA) showed a strong separation between the poor and high productive sites, considering these variables. The PCA explained 68.7% of the total variation, with PC1 explaining 37.2% and PC2 explaining 31.5% of the data. Research highlights: Crimean pine showed an abstemious characteristic in terms of soil requirements. However, it was also concluded that it has higher growth potential with higher precipitation. The results of this study shows not only an optimal site conditions of Crimean pine, but also additional insights for ecologists and forest managers in determining the decision making for forest management and afforestation applications.


  • Open Access

    Kastamonu ve Sinop bölgesi karaçam meşcereleri için çap dağılımlarının ekorejyon bazlı incelenmesi

    by Mehmet Seki, Oytun Emre Sakıcı

    Bu çalışma kapsamında, Kastamonu ve Sinop Bölge Müdürlükleri sınırları içerisindeki üç farklı ekorejyonda yayılış yapan doğal ve saf Karaçam (Pinus nigra subsp. pallasiana (Lamb.) Holmboe) meşcerelerine ilişkin çap dağılımları incelenmiş ve modellenmiştir. Çalışma materyali olarak 274 adet örnek alan verisinden faydalanılmış ve her bir örnek alanın çap dağılımlarının modellenmesi amacıyla beş farklı olasılık yoğunluk fonksiyonuna (Johnson SB, Gamma-2p, Gamma-3p, Weibull-2p ve Weibull-3p) ilişkin parametre tahminleri yapılmıştır. Olasılık yoğunluk fonksiyonlarının tahmin başarıları Hata İndeksi (e), Ki-kare (X2), Anderson-Darling (AD) ve Kolmogorov-Smirnov (KS) yardımıyla belirlenmeye çalışılmış ve bu ölçütlere göre örnek alanlara ilişkin rölatif başarı sıralamalarının ortalamaları üç farklı ekorejyon için ayrı ayrı incelenmiştir. Sonuç olarak, Johnson SB fonksiyonunun tüm ekorejyonlar için oldukça başarılı sonuçlar verdiği belirlenmiştir.


  • Open Access

    Safranbolu Yöresi Kazdağı Göknarı (Abies nordmanniana subsp. equi-trojani) meşcereleri için ağaç hacim tabloları

    by Samet Baytaş, Mehmet Seki̇

    Bu çalışma kapsamında, Safranbolu Orman İşletme Müdürlüğü sınırları içerisinde yayılış gösteren Kazdağı Göknarı (Abies nordmanniana subsp. equi-trojani) meşcereleri için kabuklu ve kabuksuz olmak üzere tek ve çift girişli ağaç hacim denklemleri geliştirilmiştir. Çalışma materyali olarak, farklı meşcere yapılarından alınan 153 adet örnek ağaca ilişkin kabuklu ve kabuksuz gövde hacim değerlerinden faydalanılmıştır. Kabuklu ve kabuksuz ağaç hacim tahminleri için 5 adet tek girişli ve 5 adet çift girişli olmak üzere 10 farklı ağaç hacim denkleminin geliştirildiği çalışmada en başarılı denklemlerin belirlenmesi için düzeltilmiş belirtme katsayısı, ortalama hata, ortalama mutlak hata ve hata kareler ortalamasının karekökü olmak üzere 4 farklı uygunluk ölçütü kullanılmıştır. En başarılı ağaç hacim denklemlerinin yöreye uygunlukları bağımsız veri seti üzerinden Wilcoxon testi ile denetlenmiş ve çalışma alanı için uygun oldukları (p>0.05) sonucuna varılmıştır. Yöre için en başarılı bulunan ağaç hacim denklemlerinin tamamı %95’in üzerinde açıklayıcılığa sahiptir. Bunun yanında, yöre için en başarılı bulunan modellerin ortalama hataları tek ve çift girişli kabuklu hacim denklemleri için sırasıyla -0.0211 m3 ve -0.0122 m3, tek ve çift girişli kabuksuz hacim denklemleri için ise sırasıyla -0.0201 m3 ve 0.0045 m3 olarak hesaplanmıştır. Çalışma sonucunda elde edilen başarılı denklemler kullanılarak kabuklu ve kabuksuz gövde hacim tahminleri için tek ve çift girişli ağaç hacim tabloları düzenlenmiştir.


  • The effects of pine mistletoe (Viscum album subsp. austriacum) on the growth of Scots pine and Crimean pine in Turkey

    by Oytun Emre Sakici, Gonca Ece Özcan, Mehmet Seki, Fadime Sağlam

    In this study, the effect of pine mistletoe (Viscum album subsp. austriacum) on basal area increment of Crimean pine and Scots pine was investigated. Dendrochronological data were collected from 223 (71 uninfected and 152 infected) Crimean pines and 195 (77 uninfected and 118 infected) Scots pines located in Kastamonu province of Turkey in 2014. Infected sample trees were classified as light, moderate or severe infection levels. Growth trends and basal area increment loses were compared between uninfected and infected trees for the periods of the last 10, 20 and 30 years. In addition, infection status of forest stands was investigated using temporary sample plots; 27 plots in Crimean pine stands and 26 plots in Scots pine. Results demonstrated that basal area increments were negatively affected by pine mistletoe for both species. Mean basal area increment losses of infected trees for the last decade were determined as 24% for Scots pine and 26% for Crimean pine. Basal area increment losses varied by infection levels (light, moderate and severe) as follows: 25%, 20% and 28% for Scots pines and 20%, 32% and 9% for Crimean pines. Scots pine stands were more severely infected by pine mistletoe than Crimean pine stands. There were negative correlations between number of infected trees and stand density for both species, while positive correlation was detected between the number of infected trees and mean diameter for Scots pine. The results of this study indicate that the pine mistletoe infection has negative effect on radial growth of Scots pine and Crimean pine trees. The results can be an important contribution to the forest management and protection activities in mistletoe‐infected stands.


  • How good is TanDEM-X 50 m forest/non-forest map? Product validation using temporally corrected geo-browser supplied imagery through Collect Earth

    by Emre Akturk, Arif Oguz Altunel, Ayhan Atesoglu, Mehmet Seki, Serdar Erpay

    TanDEM-X Forest/Non-Forest (FNF) map(s) have been one such data focusing on the status of global forest coverage, which has played an essential role in combating climate change. Although the producers have carried out verification and comparison analyses, the need for accuracy assessments in a broader sense creates uncertainties for the users to approve the new data. For this purpose, TanDEM-X 50 m FNF maps were exclusively examined visually through 66,000 test grids within 30 geocells selected from temperate, boreal, and tropical forest zones. Thus, it was aimed to provide product accuracy utilizing visual inspections to the end users of TanDEM-X FNF maps. In addition, Collect Earth (CE) software was used to evaluate the dataset visually, and its advantages or disadvantages were compared with similarly designed studies. Consequently, even though the producers’ data sets were found to have an accuracy of around 85%, it was observed that there were some issues, especially in the definition of the “non-forest” class. CE software was found to be helpful in such studies. However, the dependence of the analyses on geo-browser supplied imagery had some limitations in estimating the accuracy of a new dataset.


  • Predicting stem taper using artificial neural network and regression models for Scots pine (Pinus sylvestrisL.) in northwestern Türkiye

    by Mehmet Seki

    Stem taper models are helpful tools for predicting diameter of a tree at any height or volume of any stem section. In this study, traditional and artificial neural network (ANN) approaches were used to predict stem tapers of Scots pine individuals. The data used in this study correspond to destructively sampled trees in even-aged forest stands located in the three important locations where Scots pine grows naturally in northwestern Türkiye. In total, three regression type stem taper models from different categories and an ANN model were developed and evaluated both statistically and graphically. The best results were obtained by Kozak’s taper model accounting for the 99% of the total variance in stem diameter predictions.


  • Ecoregional Variation of Crimean Pine (Pinus nigrasubspeciespallasiana[Lamb.] Holmboe) Stand Growth

    by Mehmet Seki, Oytun Emre Sakici

    Investigation and numerical determination of the effects of ecologically different regions on forest growth are important issues to be considered for sustainable forest management. In this study, differences in growth patterns of Crimean pine (Pinus nigra subsp. pallasiana [Lamb.] Holmboe) stands among the ecoregions located in the Kastamonu region of northwestern Turkey were investigated. For this purpose, stand-level growth models for dominant height, number of trees, basal area, and volume were fitted using the data from 274 sample plots and 293 stem analysis in even-aged, pure, and productive Crimean pine stands. The nonlinear extra sum of squares method and graphical examinations revealed that growth characteristics of these Crimean pine stands were affected by ecoregional differences. Ecoregion-based growth models, which are more flexible and have the ability to reflect the ecoregional differences in growth patterns, were found to be superior to regional models. Applying general models without any ecoregional classification resulted in biases of 5.3%, 23.1%, 5.5%, and 6.2% in the estimates of dominant height, number of trees, basal area, and volume of Crimean pine stands, respectively. The results showed that ecological differences must be considered in studies on forest growth modeling and forest management. Investigation and numerical determination of the effects of ecoregional differences on forest growth are important issues to be considered for sustainable forest management. In this study, differences in growth patterns (dominant height, number of trees, stand basal area, and stand volume) of Crimean pine (Pinus nigra subsp. pallasiana [Lamb.] Holmboe) stands among the ecoregions located in the Kastamonu region of northwestern Turkey were investigated. Growth characteristics of the Crimean pine stands in the coastal ecoregion showed significant differences to those in the interior. Therefore, it was found necessary to use ecoregion-based growth models instead of a regional model for the entire region.


  • Determination of Relationships Between Stand Variables and Parameters of Weibull Function for Fagus orientalis Libsky Stands

    by Mehmet Seki̇

    Aim of study: Information about the diameter distribution of a stand is a key resource to determine planning strategies, silvicultural treatment options and product variety. In this study, the diameter distributions of Fagus orientalis Libsky stands located in Karabük region were researched, and relationship between parameters of Weibull function and stand variables was investigated. Area of study: Data used in this study were obtained from pure Oriental beech (Fagus orientalis Libsky) stands located in the Karabük region, north-central Turkey. Material and methods: For this study, sixty-two sample plots from pure Fagus orientalis Lipsky stands located in Karabük region were taken. Maximum likelihood method was used to estimate parameters of the two-parameter Weibull probability density function. The parameters estimated were then expressed as linear functions of stand variables such as mean diameter, basal area, minimum and maximum diameters etc. Main results: The regression model using arithmetic mean diameter as an independent variable and the model using maximum diameter of the stand as an independent variable were found superior for estimation of scale and shape parameters, respectively. Highlights: While the Weibull distributions determined by both methods give close results, the method of determining the distribution parameters with the developed regression models seems to be superior in terms of examining the diameter distribution changes according to different stand structure simulations.


  • Ecoregion-based height-diameter models for Crimean pine

    by Mehmet Seki, Oytun Emre Sakici

    Generalized height (h)–diameter (d) models were developed for Crimean pine stands in the Kastamonu Regional Directorate of Forestry, northwestern Turkey. Nine generalized h-d models were fitted and evaluated based on data set consisting of 2697 h-d measurements obtained from 274 sample plots located in three ecoregions of the studied region. The best results were obtained by modified Richards h-d model accounting for the 93% of the total variance in height–diameter relationship. It is a known fact that h-d relationship can vary in ecological conditions, especially for regions with large areas and various ecological conditions such as Kastamonu. To investigate the differences of height–diameter relationship among the ecoregions located in Kastamonu region, nonlinear extra sum of squares method was performed. The test results showed that there were significant differences, especially between coastal and the inland ecoregions. When compared to reduced model with the same set of parameters for the whole region, full model with a different set of parameters for each ecoregion achieved better accuracy in estimating tree height. Besides, applying h-d model fitted for the coastal ecoregion to the others, or vice versa, could lead under- or over-estimates of tree heights by about 1.8%.