Martina Daute
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martina Daute has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Graeme Maxwell Walker
Division of Engineering and Food Sciences, Abertay University, Dundee DD1 1HG, UK
3 shared publications - Barry Harrison
The Scotch Whisky Research Institute, Edinburgh EH14 4AH, UK
2 shared publications - Frances Jack
The Scotch Whisky Research Institute, Edinburgh EH14 4AH, UK
2 shared publications - Athina Tziboula-Clarke
Division of Engineering and Food Science, Abertay University, Dundee, Scotland
1 shared publication Frances Jack
The Scotch Whisky Research Institute , Research Ave N, EH14 4AP, Edinburgh , Scotland
1 shared publicationGraeme Walker
Division of Engineering and Food Sciences, School of Applied Sciences, Abertay University , Bell St, DD1 1HG, Dundee , Scotland
1 shared publication
Latest Publications
- Open Access
- 9 January 2024
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 24
The potential for Scotch Malt Whisky flavour diversification by yeast
Scotch Whisky, a product of high importance to Scotland, has gained global approval for its distinctive qualities derived from the traditional production process, which is defined in law. However, ongoing research continuously enhances Scotch Whisky production and is fostering a diversification of flavour profiles. To be classified as Scotch Whisky, the final spirit needs to retain the aroma and taste of ‘Scotch’. While each production step contributes significantly to whisky flavour—from malt preparation and mashing to fermentation, distillation, and maturation—the impact of yeast during fermentation is crucially important. Not only does the yeast convert the sugar to alcohol, it also produces important volatile compounds, e.g. esters and higher alcohols, that contribute to the final flavour profile of whisky. The yeast chosen for whisky fermentations can significantly influence whisky flavour, so the yeast strain employed is of high importance. This review explores the role of yeast in Scotch Whisky production and its influence on flavour diversification. Furthermore, an extensive examination of nonconventional yeasts employed in brewing and winemaking is undertaken to assess their potential suitability for adoption as Scotch Whisky yeast strains, followed by a review of methods for evaluating new yeast strains.
- 9 January 2024
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 24
Open AccessThe potential for Scotch Malt Whisky flavour diversification by yeast
Scotch Whisky, a product of high importance to Scotland, has gained global approval for its distinctive qualities derived from the traditional production process, which is defined in law. However, ongoing research continuously enhances Scotch Whisky production and is fostering a diversification of flavour profiles. To be classified as Scotch Whisky, the final spirit needs to retain the aroma and taste of ‘Scotch’. While each production step contributes significantly to whisky flavour—from malt preparation and mashing to fermentation, distillation, and maturation—the impact of yeast during fermentation is crucially important. Not only does the yeast convert the sugar to alcohol, it also produces important volatile compounds, e.g. esters and higher alcohols, that contribute to the final flavour profile of whisky. The yeast chosen for whisky fermentations can significantly influence whisky flavour, so the yeast strain employed is of high importance. This review explores the role of yeast in Scotch Whisky production and its influence on flavour diversification. Furthermore, an extensive examination of nonconventional yeasts employed in brewing and winemaking is undertaken to assess their potential suitability for adoption as Scotch Whisky yeast strains, followed by a review of methods for evaluating new yeast strains.
- Open Access
Experimental Whisky Fermentations: Influence of Wort Pretreatments
In addition to ethanol yield, the production of flavour congeners during fermentation is a major consideration for Scotch whisky producers. Experimental whisky fermentations can provide useful information to the industry, and this is the focus of this paper. This study investigated the impact of wort pretreatments (boiled, autoclaved, filtered) on fermentation performance and flavour development in Scotch whisky distillates as an alternative to freezing wort for storage. Our study showed that no significant sensorial differences were detected in low wines (first distillates), while the chemical compositions showed clear changes in increased levels of esters and higher alcohols in boiled and autoclaved wort. In contrast, filtered wort comprised overall lower levels of congeners. Regarding alcohol yield, all three pretreatments resulted in decreased yields. In practice, the pretreatment of wort prior to fermentation requires additional process operations, while freezing requires large storage units. The pretreatments adopted in this study significantly influence the composition of the malt wort used for experimental whisky fermentations, and this results in a poorer fermentation performance compared with untreated wort. We recommend the use of fresh or frozen wort as the best options for small-scale fermentation trials.
Open AccessExperimental Whisky Fermentations: Influence of Wort Pretreatments
In addition to ethanol yield, the production of flavour congeners during fermentation is a major consideration for Scotch whisky producers. Experimental whisky fermentations can provide useful information to the industry, and this is the focus of this paper. This study investigated the impact of wort pretreatments (boiled, autoclaved, filtered) on fermentation performance and flavour development in Scotch whisky distillates as an alternative to freezing wort for storage. Our study showed that no significant sensorial differences were detected in low wines (first distillates), while the chemical compositions showed clear changes in increased levels of esters and higher alcohols in boiled and autoclaved wort. In contrast, filtered wort comprised overall lower levels of congeners. Regarding alcohol yield, all three pretreatments resulted in decreased yields. In practice, the pretreatment of wort prior to fermentation requires additional process operations, while freezing requires large storage units. The pretreatments adopted in this study significantly influence the composition of the malt wort used for experimental whisky fermentations, and this results in a poorer fermentation performance compared with untreated wort. We recommend the use of fresh or frozen wort as the best options for small-scale fermentation trials.
- Open Access
- 4 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (4) , 1410
Comparison of Three Approaches to Assess the Flavour Characteristics of Scotch Whisky Spirit
This study compared the use of three sensory and analytical techniques: Quantitative Descriptive Analysis (QDA), Napping, and Gas Chromatography-Mass Spectrometry (GC-MS) for the assessment of flavour in nine unmatured whisky spirits produced using different yeasts. Hierarchical Multiple Factor Analysis (HMFA) showed a similar pattern of sample discrimination (RV scores: 0.895–0.927) across the techniques: spirits were mostly separated by their Alcohol by Volume (ABV). Low ABV spirits tended to have heavier flavour characteristics (feinty, cereal, sour, oily, sulphury) than high ABV spirits, which were lighter in character (fruity, sweet, floral, solventy, soapy). QDA differentiated best between low ABV spirits and GC-MS between high ABV spirits, with Napping having the lowest resolution. QDA was time-consuming but provided quantitative flavour profiles of each spirit that could be readily compared. Napping, although quicker, gave an overview of the flavour differences of the spirits, while GC-MS provided semi-quantitative ratios of 96 flavour compounds for differentiating between spirits. Ester, arenes and certain alcohols were found in higher concentrations in high ABV spirits and other alcohols and aldehydes in low ABV spirits. The most comprehensive insights on spirit flavour differences produced by different yeast strains are obtained through the application of a combination of approaches.
- 4 February 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (4) , 1410
Open AccessComparison of Three Approaches to Assess the Flavour Characteristics of Scotch Whisky Spirit
This study compared the use of three sensory and analytical techniques: Quantitative Descriptive Analysis (QDA), Napping, and Gas Chromatography-Mass Spectrometry (GC-MS) for the assessment of flavour in nine unmatured whisky spirits produced using different yeasts. Hierarchical Multiple Factor Analysis (HMFA) showed a similar pattern of sample discrimination (RV scores: 0.895–0.927) across the techniques: spirits were mostly separated by their Alcohol by Volume (ABV). Low ABV spirits tended to have heavier flavour characteristics (feinty, cereal, sour, oily, sulphury) than high ABV spirits, which were lighter in character (fruity, sweet, floral, solventy, soapy). QDA differentiated best between low ABV spirits and GC-MS between high ABV spirits, with Napping having the lowest resolution. QDA was time-consuming but provided quantitative flavour profiles of each spirit that could be readily compared. Napping, although quicker, gave an overview of the flavour differences of the spirits, while GC-MS provided semi-quantitative ratios of 96 flavour compounds for differentiating between spirits. Ester, arenes and certain alcohols were found in higher concentrations in high ABV spirits and other alcohols and aldehydes in low ABV spirits. The most comprehensive insights on spirit flavour differences produced by different yeast strains are obtained through the application of a combination of approaches.
- 21 August 2020
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 79 (1) , 26-32
Utilization of Low Nitrogen Barley for Production of Distilling Quality Malt
The potential to utilize low nitrogen barley for production of distilling quality malt was studied. This presents an opportunity to reduce the environmental impact of nitrogen fertilizer applications. Malting barley (cv. Octavia) was grown without the application of inorganic nitrogen fertilizer, to produce grain with a relatively low nitrogen concentration (1.16%, dry weight basis). Following micro-malting trials, dextrinizing units (58 DU) obtained from low nitrogen malt were much higher than a typical specification of 45 DU for malt with a conventional nitrogen concentration (<1.5%). A higher soluble nitrogen ratio (SNR) or index of modification (IoM) of 49 indicated greater modification of the low nitrogen barley, resulting in higher extract released into the wort. Additionally, much lower levels of β-glucan were found in low nitrogen malt wort (64 mg/L compared with over 100 mg/L in wort of conventional nitrogen malt). Low nitrogen malt also produced higher predicted spirit yields following wort fermentation and wash distillation. These findings indicate that lower nitrogen concentration barley can be processed without negatively impacting malt quality for distilling applications. The implication of these findings to help realize more environmentally sustainable production of barley for malting and use in distilling is discussed.
- 21 August 2020
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 79 (1) , 26-32
Utilization of Low Nitrogen Barley for Production of Distilling Quality Malt
The potential to utilize low nitrogen barley for production of distilling quality malt was studied. This presents an opportunity to reduce the environmental impact of nitrogen fertilizer applications. Malting barley (cv. Octavia) was grown without the application of inorganic nitrogen fertilizer, to produce grain with a relatively low nitrogen concentration (1.16%, dry weight basis). Following micro-malting trials, dextrinizing units (58 DU) obtained from low nitrogen malt were much higher than a typical specification of 45 DU for malt with a conventional nitrogen concentration (<1.5%). A higher soluble nitrogen ratio (SNR) or index of modification (IoM) of 49 indicated greater modification of the low nitrogen barley, resulting in higher extract released into the wort. Additionally, much lower levels of β-glucan were found in low nitrogen malt wort (64 mg/L compared with over 100 mg/L in wort of conventional nitrogen malt). Low nitrogen malt also produced higher predicted spirit yields following wort fermentation and wash distillation. These findings indicate that lower nitrogen concentration barley can be processed without negatively impacting malt quality for distilling applications. The implication of these findings to help realize more environmentally sustainable production of barley for malting and use in distilling is discussed.