Wang Xiaoning
Research Subjects
Wang Xiaoning has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Fang Youwei
Aerospace Information Research Institute Chinese Academy of Sciences Beijing China
2 shared publications- Xiaobao Su
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100049, China
2 shared publications Yu Shiji
Aerospace Information Research Institute Chinese Academy of Sciences Beijing China
2 shared publications- Dong-Dong Ma
Beijing Chaoqian Technology Co., Ltd., Beijing 100193, China
1 shared publication Fu Tiegang
Aerospace Times Low Altitude Technology Co., Ltd Chongqing China
1 shared publication- Guo-Xing Miao
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100049, China
1 shared publication
Latest Publications
- 29 October 2026
- Published by Wiley in Quality and Reliability Engineering International
Physical‐Guided Virtual Data Generation Method and Its Application in STWT Cathode Reliability Assessment
To address the critical challenges of insufficient reliability modeling accuracy and large extrapolation bias caused by missing key stress combination data in dual‐stress accelerated degradation tests, this paper proposes a physical‐guided virtual data generation method. A nonlinear Wiener process is adopted as the degradation model, and the acceleration factor consistency principle is introduced to achieve cooperative extrapolation of drift and diffusion parameters. The Arrhenius law and the inverse power law are integrated to construct a dual‐stress acceleration relationship. A staged closed‐form estimation procedure and hierarchical Bootstrap method are employed for parameter estimation and full‐chain uncertainty propagation. A two‐level Monte Carlo algorithm generates virtual trajectories with stochastic fluctuations. The method is applied to generate virtual degradation data for the missing stress combination (1020°C, 2.5 A/cm 2 ) of space traveling wave tube cathodes. The results demonstrate that this method can generate multi‐stress reliability data with consistent physical mechanisms and credible statistical properties small sample conditions, providing a novel technical pathway for the accurate reliability assessment of high‐reliability, long‐life products.
- 29 October 2026
- Published by Wiley in Quality and Reliability Engineering International
Physical‐Guided Virtual Data Generation Method and Its Application in STWT Cathode Reliability Assessment
To address the critical challenges of insufficient reliability modeling accuracy and large extrapolation bias caused by missing key stress combination data in dual‐stress accelerated degradation tests, this paper proposes a physical‐guided virtual data generation method. A nonlinear Wiener process is adopted as the degradation model, and the acceleration factor consistency principle is introduced to achieve cooperative extrapolation of drift and diffusion parameters. The Arrhenius law and the inverse power law are integrated to construct a dual‐stress acceleration relationship. A staged closed‐form estimation procedure and hierarchical Bootstrap method are employed for parameter estimation and full‐chain uncertainty propagation. A two‐level Monte Carlo algorithm generates virtual trajectories with stochastic fluctuations. The method is applied to generate virtual degradation data for the missing stress combination (1020°C, 2.5 A/cm 2 ) of space traveling wave tube cathodes. The results demonstrate that this method can generate multi‐stress reliability data with consistent physical mechanisms and credible statistical properties small sample conditions, providing a novel technical pathway for the accurate reliability assessment of high‐reliability, long‐life products.
- 1 September 2026
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 42 (8) , 5118-5135
A D‐Optimal Design for Dual‐Stress Accelerated Degradation Testing of Space Traveling Wave Tube Cathodes
The reliability of space traveling wave tubes (TWTs) depends critically on the performance of their thermionic cathodes under combined temperature and current stress. Conventional accelerated test methods, which vary a single stress or use full‐factorial designs, are often inefficient or impractical for assessing the complex coupling between the two stresses. This study presents an optimized framework for dual‐stress accelerated degradation testing, integrating failure physics with the D‐optimal criterion under four engineering constraints, such as non‐axis point, anchor point, temperature coverage, and maximum current stress. The resulting L‐shaped four‐point design, consisting of (1100°C, 2.5 A/cm 2 ), (1100°C, 0.7 A/cm 2 ), (1020°C, 2.5 A/cm 2 ), and (1060°C, 1.5 A/cm 2 ), achieves a high intrinsic D‐efficiency of 0.945 with only four test runs, realizing clear separation of main effects and efficient coupling effect identification. Compared with full‐factorial designs, the design reduces the maximum test duration by over 75% while fully retaining the capability to quantify the temperature‐current coupling effect. It is rigorously validated from multiple dimensions: physical logic, statistical estimation precision, coupling detection power, robustness to model assumption deviations and prior parameter uncertainty, and engineering practicability. 0.945 four test runs. This work establishes a systematic design paradigm and a generalizable methodological framework for the reliability verification of high‐reliability, long‐life devices operating in multi‐stress environments.
- 1 September 2026
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 42 (8) , 5118-5135
A D‐Optimal Design for Dual‐Stress Accelerated Degradation Testing of Space Traveling Wave Tube Cathodes
The reliability of space traveling wave tubes (TWTs) depends critically on the performance of their thermionic cathodes under combined temperature and current stress. Conventional accelerated test methods, which vary a single stress or use full‐factorial designs, are often inefficient or impractical for assessing the complex coupling between the two stresses. This study presents an optimized framework for dual‐stress accelerated degradation testing, integrating failure physics with the D‐optimal criterion under four engineering constraints, such as non‐axis point, anchor point, temperature coverage, and maximum current stress. The resulting L‐shaped four‐point design, consisting of (1100°C, 2.5 A/cm 2 ), (1100°C, 0.7 A/cm 2 ), (1020°C, 2.5 A/cm 2 ), and (1060°C, 1.5 A/cm 2 ), achieves a high intrinsic D‐efficiency of 0.945 with only four test runs, realizing clear separation of main effects and efficient coupling effect identification. Compared with full‐factorial designs, the design reduces the maximum test duration by over 75% while fully retaining the capability to quantify the temperature‐current coupling effect. It is rigorously validated from multiple dimensions: physical logic, statistical estimation precision, coupling detection power, robustness to model assumption deviations and prior parameter uncertainty, and engineering practicability. 0.945 four test runs. This work establishes a systematic design paradigm and a generalizable methodological framework for the reliability verification of high‐reliability, long‐life devices operating in multi‐stress environments.
- 19 September 2022
- Published by Elsevier in Physica A: Statistical Mechanics and its Applications
- Vol. 607, 128196
Effect of front two adjacent vehicles’ velocity information on car-following model construction and stability analysis
- 19 September 2022
- Published by Elsevier in Physica A: Statistical Mechanics and its Applications
- Vol. 607, 128196
Effect of front two adjacent vehicles’ velocity information on car-following model construction and stability analysis
- Open Access
- 1 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1575
In-Orbit Reliability Evaluation of Space TWTA Based on Copula Function and Bivariate Hybrid Stochastic Processes
Currently, it is still a challenge to study the degradation mechanisms of the space traveling wave tube amplifier (TWTA) with no failure and small sample tests. Given that the Copula functions are used to describe the correlation of multiple performance characteristics, this paper develops a bivariate hybrid stochastic degradation model to evaluate the in-orbit reliability of TWTA. Firstly, based on the impact analysis of the life of TWTA, helix current and anode voltage are selected as the performance degradation parameters. Secondly, stochastic processes with random effects based on the one-dimensional Wiener process and Gamma process are applied to describe the degradation of TWTA’s helix current and anode voltage, respectively, and the corresponding marginal distribution function is obtained. Then, the Copula function is utilized to describe the correlation between two different performance parameters of TWTA. Meanwhile, this paper also proposed a two-step method to estimate the reliability level of TWTA based on its in-orbit telemetry data through a two-step method, which contains a Markov Chain Monte Carlo (MCMC) algorithm and a maximum likelihood estimation (MLE) algorithm. Besides, the Bayes-Bootstrap sampling method is also used to improve the evaluation accuracy to overcome the defect of an in-orbit small sample of TWTA. Finally, a TWTA degradation case with a set of telemetry data is carried out, and the results show that the method proposed in this paper is more applicable and more accurate than other methods.
- 1 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1575
Open AccessIn-Orbit Reliability Evaluation of Space TWTA Based on Copula Function and Bivariate Hybrid Stochastic Processes
Currently, it is still a challenge to study the degradation mechanisms of the space traveling wave tube amplifier (TWTA) with no failure and small sample tests. Given that the Copula functions are used to describe the correlation of multiple performance characteristics, this paper develops a bivariate hybrid stochastic degradation model to evaluate the in-orbit reliability of TWTA. Firstly, based on the impact analysis of the life of TWTA, helix current and anode voltage are selected as the performance degradation parameters. Secondly, stochastic processes with random effects based on the one-dimensional Wiener process and Gamma process are applied to describe the degradation of TWTA’s helix current and anode voltage, respectively, and the corresponding marginal distribution function is obtained. Then, the Copula function is utilized to describe the correlation between two different performance parameters of TWTA. Meanwhile, this paper also proposed a two-step method to estimate the reliability level of TWTA based on its in-orbit telemetry data through a two-step method, which contains a Markov Chain Monte Carlo (MCMC) algorithm and a maximum likelihood estimation (MLE) algorithm. Besides, the Bayes-Bootstrap sampling method is also used to improve the evaluation accuracy to overcome the defect of an in-orbit small sample of TWTA. Finally, a TWTA degradation case with a set of telemetry data is carried out, and the results show that the method proposed in this paper is more applicable and more accurate than other methods.
- Open Access
- 26 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (19) , 8968
Nonlinear Doubly Wiener Constant-Stress Accelerated Degradation Model Based on Uncertainties and Acceleration Factor Constant Principle
Although Wiener process models with the consideration of uncertainties, which are nonlinearity, random effects, and measurement errors, have been developed for lifetime prediction in the accelerated degradation test (ADT), they fail to describe the real degradation process because these models assume that the drift parameter correlates with the applied stress, while the diffusion parameter is constant. This paper put forward a nonlinear doubly Wiener constant-stress accelerated degradation model, where both diffusion and drift parameters were compatible with the applied stress according to the acceleration factor constant principle. When degradation data were available, we obtained the unknown parameters by applying a maximum likelihood estimation (MLE) algorithm in the constant-stress ADT (CSADT) model taking uncertainties into account. In addition, the proposed model’s effectiveness was validated through an illustrative example, and an application to the traveling wave tube (TWT) was carried out to demonstrate the superiority of our model in practical applications.
- 26 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (19) , 8968
Open AccessNonlinear Doubly Wiener Constant-Stress Accelerated Degradation Model Based on Uncertainties and Acceleration Factor Constant Principle
Although Wiener process models with the consideration of uncertainties, which are nonlinearity, random effects, and measurement errors, have been developed for lifetime prediction in the accelerated degradation test (ADT), they fail to describe the real degradation process because these models assume that the drift parameter correlates with the applied stress, while the diffusion parameter is constant. This paper put forward a nonlinear doubly Wiener constant-stress accelerated degradation model, where both diffusion and drift parameters were compatible with the applied stress according to the acceleration factor constant principle. When degradation data were available, we obtained the unknown parameters by applying a maximum likelihood estimation (MLE) algorithm in the constant-stress ADT (CSADT) model taking uncertainties into account. In addition, the proposed model’s effectiveness was validated through an illustrative example, and an application to the traveling wave tube (TWT) was carried out to demonstrate the superiority of our model in practical applications.