Günter Mennig
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Günter Mennig has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
Somjate Patcharaphun
Institute of Mechanical Engineering and Plastics Technology, Chemnitz University of Technology , Chemnitz, Germany
2 shared publicationsG. Mennig
Institute of Mechanical and Plastics Engineering, Chemnitz University of Technology, Chemnitz, Germany
1 shared publication
Latest Publications
- 1 July 2006
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 45 (6) , 759-768
Simulation and Experimental Investigations of Material Distribution in the Sandwich Injection Molding Process
In sandwich injection molding, two polymeric materials are sequentially injected into a mold to form a multilayer product with a skin and core structure. Different properties of these polymers and their distribution in the cavity greatly affect the applications of the moldings. In an ideal situation, the core material should be entirely encapsulated in the skin material. When the flow front of the core material overtakes that of the skin material, breakthrough occurs, resulting in a defective part. The focus of this study is to determine the effect of molding parameters on the skin/core material distribution. The commercial simulation package (Moldflow) has been extensively compared with experiments. Both simulated and measured results suggest that in order to obtain the optimum encapsulated skin/core structure in the sandwich injection molded parts, it is necessary to select a proper core volume fraction and suitable processing parameters. A good agreement between simulation and experimental results indicates that the Moldflow program can be used as a valuable tool for the prediction of melt-flow behavior during the sandwich injection process.
- 1 July 2006
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 45 (6) , 759-768
Simulation and Experimental Investigations of Material Distribution in the Sandwich Injection Molding Process
In sandwich injection molding, two polymeric materials are sequentially injected into a mold to form a multilayer product with a skin and core structure. Different properties of these polymers and their distribution in the cavity greatly affect the applications of the moldings. In an ideal situation, the core material should be entirely encapsulated in the skin material. When the flow front of the core material overtakes that of the skin material, breakthrough occurs, resulting in a defective part. The focus of this study is to determine the effect of molding parameters on the skin/core material distribution. The commercial simulation package (Moldflow) has been extensively compared with experiments. Both simulated and measured results suggest that in order to obtain the optimum encapsulated skin/core structure in the sandwich injection molded parts, it is necessary to select a proper core volume fraction and suitable processing parameters. A good agreement between simulation and experimental results indicates that the Moldflow program can be used as a valuable tool for the prediction of melt-flow behavior during the sandwich injection process.
- 1 December 2005
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 9 (4) , 45-55
Influence of the Injection Molding Process on the Creep Behavior of Semicrystalline PBT During Aging Below its Glass Transition Temperature
- 1 December 2005
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 9 (4) , 45-55
Influence of the Injection Molding Process on the Creep Behavior of Semicrystalline PBT During Aging Below its Glass Transition Temperature
- 9 November 2005
- Published by Wiley in Polymer Composites
- Vol. 26 (6) , 823-831
Properties enhancement of short glass fiber‐reinforced thermoplastics via sandwich injection molding
This article demonstrates using sandwich injection molding in order to improve the mechanical properties of short glass fiber‐reinforced thermoplastic parts by investigating the effect of fiber orientation, phase separation, and fiber attrition compared to conventional injection molding. In the present case, the effect of short glass fiber content (varying from 0–40 wt%) within the skin and core materials were studied. The results show that the mechanical properties strongly depend not only on the fiber concentration, but also on the fiber orientation and the fiber length distribution inside the injection‐molded part. Slight discrepancies in the findings can be assumed to be due to fiber breakage occurring during the mode of processing. POLYM. COMPOS., 26:823–831, 2005. © 2005 Society of Plastics Engineers
- 9 November 2005
- Published by Wiley in Polymer Composites
- Vol. 26 (6) , 823-831
Properties enhancement of short glass fiber‐reinforced thermoplastics via sandwich injection molding
This article demonstrates using sandwich injection molding in order to improve the mechanical properties of short glass fiber‐reinforced thermoplastic parts by investigating the effect of fiber orientation, phase separation, and fiber attrition compared to conventional injection molding. In the present case, the effect of short glass fiber content (varying from 0–40 wt%) within the skin and core materials were studied. The results show that the mechanical properties strongly depend not only on the fiber concentration, but also on the fiber orientation and the fiber length distribution inside the injection‐molded part. Slight discrepancies in the findings can be assumed to be due to fiber breakage occurring during the mode of processing. POLYM. COMPOS., 26:823–831, 2005. © 2005 Society of Plastics Engineers