LLLei Liang

Lei Liang

*This is an algorithmically generated author record based on publicly available information.

Lei Liang has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hydrophilic Modification of Poly-β-Hydroxybutyrate and Investigation of Its Properties

    by Lei Liang, Huiru Lei, Qinghua Xiao, Yujia Xiong, Zilai Mei, Hualin Liu, Lang Liu, Dong Liao, Wei Zhao, Dong Wang

    Poly-β-hydroxybutyrate (PHB), a microbially biodegradable polyester, suffers from high crystallinity, intrinsic surface hydrophobicity and a narrow thermal processing window, which greatly restrict its practical application. In this work, high-molecular-weight commercial poly-β-hydroxybutyrate (PHB) was degraded through ethylene-glycol alcoholysis to obtain a hydroxyl-terminated PHB-diol prepolymer. A block copolymer was further synthesized by coupling the prepolymer with hydrophilic poly(ethylene glycol) (PEG-1500) using hexamethylene diisocyanate as the chain extender. Molecular-weight measurements confirm that alcoholysis reduces the peak molecular weight of PHB-diol to 9.12 × 103, and the subsequent coupling reaction raises the peak molecular weight of the resulting block copolymer up to 2.40 × 105. After chemical modification, the water contact angle decreases from 75.5° to 43.6°, while the surface free energy increases notably from 28.4 mN/m to 54.1 mN/m. Morphological observations show that the introduction of poly(ethylene glycol) (PEG) segments inhibits the regular spherulite growth of PHB. Due to flexible PEG segments and thermally sensitive carbamate linkages formed in the reaction, the thermal stability of this block copolymer declines. This chemical coupling strategy effectively improves the surface hydrophilicity of PHB. It should be noted that biodegradation performance is only inferred from structural features, without direct biodegradation experimental verification. This work provides fundamental experimental support for the hydrophilic modification of PHB-based degradable polymer materials.

  • Open Access

    Research Progress in the Application of Nanotechnology in Fracturing: A Review

    by Lei Liang, Huiru Lei, Qinwen Zhang, Wei Zhao, Dong Liao, Dong Wang, Yujia Xiong, Lang Liu, Hualin Liu, Zilai Mei

    Hydraulic fracturing is a core stimulation technology for enhancing hydrocarbon production. However, it faces significant technical bottlenecks in unconventional reservoirs. These bottlenecks include poor adaptability to high-temperature and high-salinity environments, water-sensitive formation damage, and insufficient long-term fracture conductivity. Nanotechnology leverages unique properties of nanomaterials, such as surface effects, quantum size effects, and designability. Nanotechnology offers systematic solutions for optimizing fracturing fluids, enhancing proppant performance, and innovating waterless fracturing techniques. This review outlines the current status of fracturing technology, exploring the role of nanoparticles in improving fluid rheology, proppant strength, and interface regulation, and discusses future challenges. Studies show that nanomodified fracturing fluids can increase high-temperature viscosity retention by over 300%. Meanwhile, waterless fracturing reduces water consumption by 80%. Despite challenges in particle agglomeration and cost, nanotechnology demonstrates significant potential in boosting recovery and reducing environmental impact. Nanotechnology is positioned as a transformative technology for future unconventional resource development.


  • Open Access

    Preparation and application of an economical and environmentally friendly hydrate inhibitor in gas field development

    by Dong Liao, Gui Su, Lei Liang, Jian He, Haifeng Ye, Qinghua Xiao, Yujia Xiong, Dong Wang, Lang Liu, Xingyu Luo

    The prevention and control of natural gas hydrates is an important link in ensuring winter production. Traditional thermodynamic inhibitors, like methanol, are commonly utilized due to their low unit costs and pricing, but they come with considerable safety issues when used on-site due to their high toxicity, flammability, and explosive potential. A cost-effective and eco-friendly hydrate inhibitor was created by combining light polyol amine with other ingredients to solve this problem. At a concentration of 30%, the product has a flash point greater than 80°C and a solidification point of -45°C. With success rates of 99% and 100%, respectively, it was used for winter casing pre-injection anti-freezing operations and balancing tank defoamer anti-freezing operations. Experiments have demonstrated the effectiveness of this inhibitor in preventing the formation of natural gas hydrates. In wintertime on-site anti-freezing activities, the projected cost can be substituted for methanol, as it is essentially equivalent to methanol.


  • Preparation and Performance of a Demulsifier Based on Nanocrystalline Cellulose

    by Lei Liang, Chao Su, Wei Zhao, Tao Jiang, Zheng-Wei Xing, Cong-Yue Gu, Yu-Jia Xiong

  • Open Access

    Synthesis, Performance, Mechanism: A Hyperbranched Phase Reverse Nano-Demulsifier for Condensate Emulsion

    by Lei Liang, Chao Su, Yujia Xiong, Lei Wei, Congyue Gu, Haifeng Ye, Qinghua Xiao, Xingyu Luo

    Organic amine and nanosilica were combined to create a nano-demulsifier, which was employed in the oil–water separation process of a condensate emulsion. The nano-demulsifier has the structure of hyperbranched polymers and the skeleton structure of hyperbranched nanomaterials, and displays the demulsification impact of organic amine polymers as well as the synergistic effect of nanomaterials. This nano-demulsifier has the potential to drastically reduce the quantity of condensate demulsifiers utilized in the gathering station. The dehydration rate of the condensate lotion in the gas gathering station can reach more than 95% only at a concentration of 1.0 wt.%. Its application can significantly increase the separation efficiency of the condensate emulsion as well as the quality of condensate oil. It has a positive impact on cost reduction and efficiency in gas well production. The mechanism of action of the demulsifier was also studied, and the results show that the demulsifier is a phase reverse demulsifier.


  • Open Access

    Fluoropolymer: A Review on Its Emulsion Preparation and Wettability to Solid-Liquid Interface

    by Lei Liang, Tao Wen, Jun Xin, Chao Su, Ke Song, Wei Zhao, Hongwu Liu, Gui Su

    In the preparation of a superamphiphobic surface, the most basic method is to reduce the surface free energy of the interface. The C—F bond has a very low surface free energy, which can significantly change the wettability of the solid–liquid interface and make it a hydrophobic or oleophobic, or even superamphiphobic surface. Based on the analysis of a large number of research articles, the preparation and application progress in fluoropolymer emulsion were summarized. After that, some corresponding thoughts were put forward combined with our professional characteristics. According to recent research, the status of the fluoropolymer emulsion preparation system was analyzed. In addition, all related aspects of fluoropolymer emulsion were systematically classified in varying degrees. Furthermore, the interaction between fluoropolymer structure and properties, especially the interaction with nanomaterials, was also explored. The aim of this review is to try to attract more scholars’ attention to fluorocarbon interfacial materials. It is expected that it will make a certain theoretical and practical significance in the preparation and application of fluoropolymer.


  • Open Access

    Fluoropolymer Microemulsion: Preparation and Application in Reservoir Wettability Reversal and Enhancing Oil Recovery

    by Lei Liang, Yanling Wang, Bin Liu, Jincheng Gong, Chuanbao Zhang


  • Preparation and application of bagasse‐based adsorbent for highly efficient removal of mercury ions

    by Nianfang Ma, Jinrong Li, Jian Zeng, Lei Liang, Jiayong Zhang

    A high‐performance bagasse‐based adsorbent was prepared from agricultural waste bagasse by grafting of acrylamide and aminating with diethylenetriamine. Effects of catalyst dosage, acrylamide concentration, reaction temperature, and bath ratio on the grafting yield were investigated. The adsorption performances for mercury ions were evaluated by batch adsorption experiments and kinetic experiments. The results show that the adsorbent has high adsorption capacity for mercury in a wide range of pH values. The adsorption capacity could be as high as 813.0 mg/g, and the removal percentage for mercury ions can reach 99.9%. The kinetic adsorption experiments show it can achieve adsorption equilibrium rapidly, which implies that the adsorbent has a strong ability to capture mercury ions. Besides, the bagasse‐based adsorbent showed promising regeneration performance, and its adsorption amount of regenerated adsorbent only slightly decreased after five recycling.Practitioner points: An amino‐rich adsorbent was prepared from bagasse. The adsorbent possesses high adsorption capacity and high removal efficiency for mercury. The aminated bagasse adsorbs mercury rapidly. The adsorbent functionalized with amino possesses strong affinity toward mercury.


  • Open Access

    Hydrophilic and antimicrobial core–shell nanoparticles containing guanidine groups for ultrafiltration membrane modification

    by Yongqiang Gao, Lei Liang, Song Zhao, Yunlong Qi, Wen Zhang, Xuefei Sun, Zhi Wang, Jixiao Wang, Baodong Song

    Hydrophilic and antimicrobial core–shell nanoparticles containing guanidine groups (SNP@PG) were applied to fabricate membranes with improved water flux and fouling resistance.