Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ziyad M. Almohaimeed has a total of 111 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    5.8 GHz Microstrip Patch Antennas for Wireless Power Transfer: A Comprehensive Review of Design, Optimization, Applications, and Future Trends

    by Yahya Albaihani, Rizwan Akram, El Amjed Hajlaoui, Abdullah M. Almohaimeed, Ziyad M. Almohaimeed, Abdullrab Albaihani

    Wireless Power Transfer (WPT) has become a pivotal technology, enabling the battery-free operation of Internet of Things (IoT) and biomedical devices while supporting environmental sustainability. This review provides a comprehensive analysis of microstrip patch antennas (MPAs) operating at the 5.8 GHz Industrial, Scientific, and Medical (ISM) band, emphasizing their advantages over the more commonly used 2.4 GHz band. A detailed and systematic classification framework for MPA architectures is introduced, covering single-element, multi-band, ultra-wideband, array, MIMO, wearable, and rectenna systems. The review examines advanced optimization methodologies, including Defected Ground Structures (DGS), Electromagnetic Bandgap (EBG) structures, Metamaterials (MTM), Machine Learning (ML), and nanomaterials, each contributing to improvements in gain, bandwidth, efficiency, and device miniaturization. Unlike previous surveys, this work offers a performance-benchmarked classification specifically for 5.8 GHz MPAs and provides a quantitative assessment of key trade-offs, such as efficiency versus substrate cost. The review also advocates for a shift toward Power Conversion Efficiency (PCE)-centric co-design strategies. The analysis identifies critical research gaps, particularly the ongoing disparity between simulated and experimental performance. The review concludes by recommending multi-objective optimization, integrated antenna-rectifier co-design to maximize PCE, and the use of advanced materials and computational intelligence to advance next-generation, high-efficiency 5.8 GHz WPT systems.


  • Open Access

    Miniaturized EBG Antenna for Efficient 5.8 GHz RF Energy Harvesting in Self-Powered IoT and Medical Sensors

    by Yahya Albaihani, Rizwan Akram, Abdullah. M. Almohaimeed, Ziyad M. Almohaimeed, Lukman O. Buhari, Mahmoud Shaban

    This study presents a compact and high-efficiency microstrip antenna integrated with a square electromagnetic band-gap (EBG) structure for radio frequency energy harvesting to power battery-less Internet of Things (IoT) sensors and medical devices in the 5.8 GHz Industrial, Scientific, and Medical (ISM) band. The proposed antenna features a compact design with reduced physical dimensions of 36 × 40 mm2 (0.69λo × 0.76λo) while providing high-performance parameters such as a reflection coefficient of −27.9 dB, a voltage standing wave ratio (VSWR) of 1.08, a gain of 7.91 dBi, directivity of 8.1 dBi, a bandwidth of 188 MHz, and radiation efficiency of 95.5%. Incorporating EBG cells suppresses surface waves, enhances gain, and optimizes impedance matching through 50 Ω inset feeding. The simulated and measured results of the designed antenna show a high correlation. This study demonstrates a robust and promising solution for high-performance wireless systems requiring a compact size and energy-efficient operation.


  • High Gain Compact Antenna-in-Package Solution Using Like Mushroom Electromagnetic Band Gap for Industrial, Scientific, and Medical Band

    by El Amjed Hajlaoui, Ziyad M. Almohaimeed, Abdullah Almohaimeed, Wazie Abdulkawi

    A single-feed circularly polarized antenna with electromagnetic band gap (EBG) has been developed for the Industrial, Scientific, and Medical (ISM) bands. The proposed antenna features a square patch with eight slits on each side and corner, along with a cross-slot in the middle. To prevent surface wave excitation caused by the patch antenna's thick substrate, new grounded like-mushroom EBG structures will surround the antenna. The frequency band gap characteristics of the EBG unit cells have been optimized at 5.8 GHz. A row of EBGs squares is 4.73 mm (0.063λo) away from the antenna square patch and surrounds it on all four sides. The proposed mushroom-like structure design improves the antenna's directivity by 43.31%, gain by 32.93%, reflection coefficient by 93%, and radiation efficiency by 35.22%. This topology enables a wide variety of wireless communications applications. Computer simulation technologies (CSTs) were used to generate simulation figures for the proposed antenna, operating at 5.8 GHz. Furthermore, the new Like-Mushroom EBG antenna simulation, experimental results, and other reported works confirm that our approach meets the studied objectives regarding polarization purity, radiation efficiency, high directivity, and gain.


  • Open Access

    New SRR/CSRR antenna dual Band-notch for WLAN and X Band Satellite communication

    by El Amjed Hajlaoui, Ziyad Almohaimeed

    This paper will propose an innovative compact, low-cost, low-profile inverted U-shaped patch antenna with a single and dual band-notched ultra-wideband (UWB) with split ring resonators (SRRs). To achieve our main goal based on the reduction of electromagnetic interference in narrowband communications (WLAN, WiMAX, and satellite), four-element rectangular split-ring resonators (SRRs) array are placed nearby the feedline to create notch band at approximately 5.15-5.35 and 5.725-5.85 GHz. The SRRs antenna's measured data indicate a directivity of 8.52 dBi, a gain of 7.18 dBi, a reflection coefficient of -27 dB, and an efficiency of 84.3%. The realized prototype, including the SRRs and CSRRs structures, were carried out using a PCB prototyping machine. Reflection coefficient measurement is obtained using a vector network analyzer (VNA) PNA-X from Agilent Technologies. The measured values of the proposed antenna, with 50 x 38 x 1.6 mm3 in total and constructed on a FR4 substrate with permittivity of ɛr = 4.3, loss tanδ = 0.0024 and substrate thickness of h = 1.6 mm, correlate well with the simulated values. The proposed antenna, compared with other published work, is a good candidate to operate in WLAN, X-band.


  • Open Access

    Resource Management in UAV Enabled MEC Networks

    by Muhammad Abrar, Ziyad M. Almohaimeed, Ushna Ajmal, Rizwan Akram, Rooha Masroor, Muhammad Majid Hussain

    Mobile edge cloud networks can be used to offload computationally intensive tasks from Internet of Things (IoT) devices to nearby mobile edge servers, thereby lowering energy consumption and response time for ground mobile users or IoT devices. Integration of Unmanned Aerial Vehicles (UAVs) and the mobile edge computing (MEC) server will significantly benefit small, battery-powered, and energy-constrained devices in 5G and future wireless networks. We address the problem of maximising computation efficiency in U-MEC networks by optimising the user association and offloading indicator (OI), the computational capacity (CC), the power consumption, the time duration, and the optimal location planning simultaneously. It is possible to assign some heavy tasks to the UAV for faster processing and small ones to the mobile users (MUs) locally. This paper utilizes the k-means clustering algorithm, the interior point method, and the conjugate gradient method to iteratively solve the non-convex multi-objective resource allocation problem. According to simulation results, both local and offloading schemes give optimal solution.


  • Open Access

    IoT-based intelligent source–load–storage coordination scheme for prosumer campus microgrids

    by Hafiz Abdul Muqeet, Muhammad Shahzad, Moazzam Shehzad, Jumshed Akhter, Ziyad M. Almohaimeed, Rizwan Akram, Muhammad Majid Hussain

    Electrical energy is very necessary for human life in the modern era. The rising energy prices, depletion of fossil fuels, and instability of the grid are alarming situations. So, it needs a smart solution to ensure the balance between pricing and saving natural resources. Some other issues like environmental change, limitations on installation of new transmission lines, reliability concerns, and considering the expansion in distributed energy generation technologies promise the implementation of distributed generation extensively. The integration of two or more energy supplies in a power system is known as distributed energy resource system. In this study, a university campus is taken as a case study to reduce the energy cost while considering the aforementioned issues. The intelligent source–load–storage coordination scheme is proposed to utilize the available renewable energy resources with storage systems. The proposed linear model is solved in MATLAB using the exact method technique considering the economic parameters. The campus microgrid analysis is not addressed considering the Internet-of-Thing (IoT)-based building, especially in the scenario of Pakistan. The results show the efficacy of the proposed model and can be implemented on the existing campus for source–load–storage coordination as an economical solution.


  • Open Access

    An Effective Route for the Growth of Multilayer MoS2 by Combining Chemical Vapor Deposition and Wet Chemistry

    by Ziyad M. Almohaimeed, Shumaila Karamat, Rizwan Akram, Saira Sarwar, Asad Javaid, Ahmet Oral

    Molybdenum disulfide (MoS2) is an actively pursuing material of the 2D family due to its semiconducting characteristics, making it a potential candidate for nano and optoelectronics application. MoS2 growth from molybdenum and sulphur precursors by chemical vapor depositions (CVD) is used widely, but molybdates’ conversion into MoS2 via CVD is overlooked previously. Direct growth of MoS2 on the desired pattern not only reduces the interfacial defects but also reduces the complexities in device fabrication. In this work, we combine the wet synthesis and chemical vapor deposition method where sodium molybdate and L-cysteine are used to make a solution. With the dip coating, the mixture is coated on the substrates, and then, chemical vapor deposition is used to convert the chemicals into MoS2. Raman spectroscopy revealed the presence of oxysulphides (peaks number value) other than and , where heat treatment was performed in the presence of Ar gas flow only. On the other hand, the films reducing in the presence of sulphur and argon gas promote only and peaks of MoS2, which confirms complete transformation. XRD diffraction showed a very small change in the diffraction peaks and value of strain, whereas SEM imaging showed the flakes formation for MoS2 samples which were heated in the presence of sulphur. X-ray photoelectron spectroscopy is also performed for the chemical composition and to understand the valence state of Mo, S, and O and other species.


  • Innovative Ultra-Wideband (UWB) Antenna with Folded Stepped Impedance Resonators

    by Ziyad M. Almohaimeed

    This article proposes a new ultra-wideband (UWB) antenna with twin sharply rejected notch bands that sizes just $18 \text{mm}\ \mathrm{x}28 \text{mm}\ \mathrm{x} 1$ mm in total dimension for dual-band WLAN applications. The antenna construction is optimized for dual-band operation, ensuring a consistent bandwidth. Optimizing the length of Path 1 may fix the antenna resonance in the desired WLAN band, whilst tuning the length of Path 2 (as shown in the identical Figure) attempts to fix another WLAN band resonance. Two short-circuited folded stepped impedance resonators (SIRs) and a slightly truncated ground plane were proposed to accomplish the band rejection feature; the compact folded SIRs are positioned next to the feed line. The right-side branch of the antenna has a tiny slot integrated in it to achieve the requisite resonance electric length while also reducing the antenna's overall size. The proposed antenna is constructed on a 1 mm thick FR 4 substrate with $\varepsilon \mathrm{r}=4.3$. The measured results indicate dual-band operations satisfactory, with −10 dB impedance bandwidths of 9.1% and 36.2%, respectively, centered at 2.45 and 6.364 GHz and spanning the WLAN operational bands. Considering the performance parameters, this proposed Folded Stepped Impedance antenna has been optimized to enhance radiation patterns and antenna gains throughout the operation bands.

  • Open Access

    Capacitive and Conductometric Type Dual-Mode Relative Humidity Sensor Based on 5,10,15,20-tetra Phenyl Porphyrinato Nickel (II) (TPPNi)

    by Rizwan Akram, Muhammad Yaseen, Zahid Farooq, Ayesha Rauf, Ziyad M. Almohaimeed, Muhammad Ikram, Qayyum Zafar

    (1) Background: A quest for a highly sensitive and reliable humidity monitoring system for a diverse variety of applications is quite vital. Specifically, the ever-increasing demand of humidity sensors in applications ranging from agriculture to healthcare equipment (to cater the current demand of COVID-19 ventilation systems), calls for a selection of suitable humidity sensing material. (2) Methods: In the present study, the TPPNi macromolecule has been synthesized by using a microwave-assisted synthesis process. The layer structure of the fabricated humidity sensor (Al/TPPNi/Al) consists of pair of planar 120 nm thin aluminum (Al) electrodes (deposited by thermal evaporation) and ~160 nm facile spin-coated solution-processable organic TPPNi as an active layer between the ~40 µm electrode gap. (3) Results: Electrical properties (capacitance and impedance) of sensors were found to be substantially sensitive not only on relative humidity but also on the frequency of the input bias signal. The proposed sensor exhibits multimode (capacitive and conductometric) operation with significantly higher sensitivity ~146.17 pF/%RH at 500 Hz and 48.23 kΩ/%RH at 1 kHz. (4) Conclusions: The developed Al/TPPNi/Al surface type humidity sensor’s much-improved detecting properties along with reasonable dynamic range and response time suggest that it could be effective for continuous humidity monitoring in multi environmental applications.


  • Open Access

    Energy Efficient UAV-Enabled Mobile Edge Computing for IoT Devices: A Review

    by Muhammad Abrar, Ushna Ajmal, Ziyad M. Almohaimeed, Xiang Gui, Rizwan Akram, Roha Masroor

    With the emergence of computation-intensive and delay-sensitive applications, such as face recognition, virtual reality, augmented reality, and Internet of Things (IoT) devices; Mobile Edge Computing (MEC) allows the IoT devices to offload their heavy computation tasks to nearby edge cloud network rather than to compute the tasks locally. Therefore, it helps to reduce the energy consumption and execution delay in the ground mobile users. Flying Unmanned Aerial Vehicles (UAVs) integrated with the MEC server play a key role in 5G and future wireless communication networks to provide spatial coverage and further computational services to the small, battery-powered and energy-constrained devices. The UAV-enabled MEC (U-MEC) system has flexible mobility and more computational capability compared to the terrestrial MEC network. They support line-of-sight (LoS) links with the users offloading their tasks to the UAVs. Hence, users can transmit more data without interference by mitigating small-scale fading and shadowing effects. UAVs resources and flight time are very limited due to size, weight, and power (SWaP) constraints. Therefore, energy-aware communication and computation resources are allocated in order to minimize energy consumption.In this paper, a brief survey on U-MEC networks is presented. It includes the brief introduction regarding UAVs and MEC technology. The basic terminologies and architectures used in U-MEC networks are also defined. Moreover, mobile edge computation offloading working, different access schemes used during computation offloading technique are explained. Resources that are needed to be optimized in U-MEC systems are depicted with different optimization problem, and solution types. Furthermore, to guide future work in this area of research, future research directions are outlined. At the end, challenges and open issues in this domain are also summarized.