SYShuangchun Yang

Shuangchun Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuangchun Yang has a total of 67 co-authors. Here are the top co-authors by number of shared publications:

  • Yi Pan

    Department of Petroleum and Natural Gas Engineering Liaoning Petrochemical University Fushun China

    9 shared publications
  • Qi Feng

    School of Civil Engineering, Liaoning Petrochemical University, No. 1, West Section of Dandong Road, Wanghua District, Fushun 113001, China

    3 shared publications
  • Yanchao Wang

    Department of Petroleum and Natural Gas Engineering, Liaoning Petrochemical University, Fushun, China

    3 shared publications
  • Yi Pan

    School of Petroleum and Natural Gas Engineering, Liaoning Petrochemical University, Fushun, Liaoning, China

    3 shared publications
  • Zhenye Liu

    Department of Petroleum Engineering, Liaoning Petrochemical University, Fushun 113001, China

    3 shared publications
  • Pan

    Department of Petroleum and Natural Gas Engineering College, Liaoning Petrochemical University, No. 1, West Section of Dandong Road, Wanghua District, Fushun 113001, China

    2 shared publications

Latest Publications

  • Open Access

    Simulation Study on Rock Fracture Mechanisms in Deep Shale Reservoirs

    by Chong Duan, Jian Su, Bingshan Wang, Songze Liao, Yi Pan, Shuangchun Yang

    Deep shale contains well-developed bedding planes and a highly plastic matrix whose competition governs fracture behavior. Most Brazilian splitting simulations treat shale as linear elastic, so bedding anisotropy cannot be separated from matrix plasticity. This study addresses that question in one numerical framework: a finite element Brazilian splitting model is developed in which the Drucker–Prager criterion governs matrix plasticity and globally embedded cohesive elements represent the bedding planes and potential fracture paths. Elastic and elastoplastic responses are compared for bedding-plane angles of 0–90° and two bedding-plane strengths. Four fracture modes are identified—matrix tension, matrix shear, bedding-plane shear and bedding-plane tension. For the elastoplastic model at high bedding-plane strength, matrix tension dominates above 60°, mixed modes occur between 30° and 60°, bedding-plane shear below 30°, and bedding-plane tension near 0°. Matrix plasticity reduces microcrack number and simplifies the fracture pattern; weaker bedding planes promote shear failure and lower peak stress. The failure mode is thus governed by bedding–matrix competition, not by bedding-plane orientation alone.

  • Open Access

    Overview of the research and application of carbon-based nano-fluorescent tracer in low-permeability reservoir

    by Xingyan Qi, Shuangchun Yang, Yi Pan, Hui Yang

    As the emerging fluorescent material, carbon-based nano-fluorescent tracers exhibit excellent fluorescent properties and surface modifiability. They hold significant application potential in fields such as oilfield tracing, biomedical imaging, and water treatment. However, the development of low-permeability oil reservoirs is confronted with challenges including low permeability and complex geological conditions. Traditional tracers suffer from limitations such as poor migration capability and low stability, which restricts the dynamic monitoring of production performance in low-permeability oil reservoirs. How to achieve long-term dynamic monitoring in low-permeability oil reservoirs has become a global challenge, making the research on tracers suitable for low-permeability oil reservoirs critically important. Currently, there is a lack of comprehensive review studies on the application of carbon-based nano-fluorescent tracers in low-permeability oil reservoirs. This article not only analyzes the adaptation mechanism of carbon-based nano-fluorescent tracers to low-permeability oil reservoirs and their synthesis technologies-filling the gap in review studies within this field, but also discusses the practical application and effects of these tracers in oilfields. Furthermore, addressing issues such as low fluorescence yield and difficulties in large-scale production, this article proposes strategies, including material modification and green synthesis, to achieve both economic efficiency and environmental sustainability. Through these research efforts, aiming to provide more efficient tracers for the petroleum energy industry, thereby promoting advancements in both the petroleum and materials fields.

  • Research Progress on the Application of Ceramic Membranes in Wastewater Treatment of the Petroleum and Petrochemical Industry

    by Sensen Xu, Yi Pan, Yanchao Wang, Shuangchun Yang, Manglai Gao

    Ceramic membranes have become a key separation technology for treating complex pollutants in the petrochemical industry due to their excellent resistance to extreme conditions, high separation efficiency, and extended service life. This review systematically summarizes the application progress of ceramic membranes in treating oily, high-salinity, and phenol-containing wastewater, and clarifies the technical compatibility between membrane material properties and the characteristics of petrochemical wastewater. The technological development has mainly progressed along three paths: surface functional modification, structural optimization, and multiprocess coupling. Ceramic membranes have demonstrated efficient oil removal in oily wastewater treatment, excellent salt rejection in high-salinity streams via nanofiltration (NF), reverse osmosis (RO), and membrane distillation (MD), and outstanding phenol degradation in phenol-laden wastewater, with successful industrial applications in offshore produced water reinjection and catalytic slurry solid removal. However, several bottlenecks remain, including severe membrane fouling, high operating costs, insufficient adaptability to complex wastewater matrices, and a low level of intelligence. Future development trends are directed toward functional composite membranes, intelligent process integration, resource recovery, and cost reduction. This review provides a scientific reference for further technological innovation and large-scale application of ceramic membranes in the petrochemical industry, supporting the sector’s transition toward efficient pollution control and green, low-carbon development.

  • Open Access

    Design and Study of a New Rotary Jet Wellbore Washing Device

    by Shupei Li, Zhongrui Ji, Qi Feng, Shuangchun Yang, Xiuli Sun

    Wellbore washing technology is a basic operation in wellbore maintenance. Problems such as low automation levels, long processing times, the fact that it is easy to cause downhole falling, and cleaning blind areas greatly affect the use and maintenance of traditional cleaning equipment. These problems usually come from design defects such as a complicated installation process, a lack of an anti-impact structure, and a fixed jet direction. To address the aforementioned issues, this paper proposes an efficient and integrated rapid-disassembly and -assembly automatic filtration rotary jet cleaning device. The device is divided into two main units and further subdivided into four modules. The quick-assembly unit comprises an elastic connection module and a downstroke quick-assembly module, which can automatically compensate for deviations in equipment position during the installation process, ensuring the reliability of the installation process and the sealing of the equipment and facilitating the rapid connection and separation of the tool string. The wellbore cleaning unit includes a hydraulic rotary washing module and a rotary filtration storage module. The wellbore is jet-flushed by hydraulic drive, and the solid particles are separated and filtered during the cleaning fluid circulation process to realize the purification and reuse of the cleaning fluid. The device reduces the installation operation time and labor cost, improves the reliability of equipment in the well, improves the flushing coverage area and the cleaning efficiency, realizes the reuse of the cleaning liquid in the wellbore, reduces the energy consumption of the flowback treatment, and comprehensively improves the cleaning efficiency and the energy utilization efficiency.

  • Open Access

    A Review of Influencing and Controlling Vortex-Induced Vibrations for Deepwater Risers

    by Chao Yan, Qi Feng, Shuangchun Yang

    With the expansion of offshore oil and gas resources to deepwater areas, the problem of the vortex-induced vibration of marine risers, as a key structure connecting offshore platforms and subsea wellheads, has become increasingly prominent. At present, there are few reviews on the vortex-induced vibration of flexible risers. This review provides a detailed discussion of vortex-induced vibration in marine risers. This review begins with the engineering background. It then systematically analyzes the key factors that influence VIV response. These factors include the riser’s structural parameters, such as aspect ratio and mass ratio. They also include the external fluid environment. Next, this review evaluates current VIV suppression strategies by analyzing specific experimental results. It compares the effectiveness and trade-offs of passive techniques. It also examines the potential and limitations of active methods, which often use smart materials, like piezoelectrics. This study highlights the major challenges in VIV research today. These challenges relate to prediction accuracy and suppression efficiency. Key problems include model uncertainty at high Reynolds numbers and the practical implementation of suppression devices in engineering systems. Finally, this paper presents an outlook on the future directions. It concludes that an intelligent, full-lifecycle integrity management system is the best path forward.


  • Open Access

    Advances and Factors Influencing In Situ Combustion Effectiveness: A Review

    by Zhenye Liu, Bo Wang, Shuangchun Yang, Chao Tian

    In situ combustion, as a technology for improving oil recovery efficiency, faces technical and economic challenges. Fire-driven oil recovery technology is renowned for its significant technical advantages, including wide reservoir applicability, efficient crude oil recovery rate, and lower extraction costs. It is particularly suitable for the recovery of high viscosity petroleum resources such as heavy oil and oil sands. However, due to the complexity of the fire-driven mechanism, there are still many problems in the engineering design of fire-driven reservoirs. In particular, the lack of intuitive and accurate understanding of the combustion and fire-driven process in the reservoir makes it difficult to take effective means to accurately judge the underground combustion conditions, monitoring and control of the fire-driven leading edge. This paper reviews the effects of permeability, oil saturation, gas injection rate, injection and extraction well spacing, and reservoir thickness. These findings can help to improve the stability and efficiency of fire-driven technology so as to realise better mining results in practical applications.


  • Asphaltene Deposition Inhibitors in CO2 Flooding: A Review and Future Application Prospects

    by Shuangchun Yang, Hao Wang, Xu Lou, Yi Pan, Zhiyong Hu, Yulin Yan