Jolene P. Reid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jolene P. Reid has a total of 154 co-authors. Here are the top co-authors by number of shared publications:
Junshan Lai
Department of Chemistry University of British Columbia Vancouver British Columbia Canada
9 shared publications- Yutao Kuang
University of British Columbia
9 shared publications - Isaiah O. Betinol
Department of Chemistry
8 shared publications - Jonathan M. Goodman
Yusuf Hamied Department of Chemistry, University of Cambridge, Cambridge, UK
7 shared publications - Matthew S. Sigman
University of Utah
6 shared publications - Corinna S. Schindler
BC Cancer Research Institute, 675 West 10th Ave, Vancouver, BC, Canada, V5Z 1L3
5 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 5 (10) , 4154-4163
An interactive web tool for steric analysis of broad chiral phosphoric acid catalysts
An interactive web application standardizes AREA( θ ) calculation for chiral phosphoric acids, enabling reproducible comparison of steric accessibility across diverse catalyst scaffolds.
- 14 October 2026
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 5 (10) , 4154-4163
Open AccessAn interactive web tool for steric analysis of broad chiral phosphoric acid catalysts
An interactive web application standardizes AREA( θ ) calculation for chiral phosphoric acids, enabling reproducible comparison of steric accessibility across diverse catalyst scaffolds.
- 28 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 20235-20246
Enabling Data-Efficient Machine Learning through Multi-Target Training Set Design via Greedy Neighborhood Coverage
Machine learning is increasingly used to guide asymmetric catalysis, but each enantioselectivity measurement remains experimentally expensive. Prior work established that predictive accuracy in these datasets is dominated by reactions that are structurally similar to the target, motivating neighborhood-restricted models, such as radius-based random forests (RaRF). However, realistic screening campaigns require predictions for many related targets simultaneously (e.g., 20–50 reactions in a scope), and selecting training data independently for each target can be redundant because target neighborhoods overlap. Here, we frame multi-target training set design as a neighborhood multi-coverage problem, where the goal is to select a compact shared set of experiments such that each target retains at least one neighbor within a given similarity radius in reaction fingerprint space. We introduce MT-RaRF, a greedy neighborhood-coverage algorithm that prioritizes candidate experiments that satisfy the remaining local-neighbor needs of underserved targets while exploiting overlap among neighborhoods. Across several previously curated asymmetric catalysis datasets, MT-RaRF can use only a fraction of the experiments required by independent RaRF while maintaining comparable mean absolute errors. Systematic comparisons across similarity radii, training budgets, and target-set distributions establish practical guidelines for prospective use: MT-RaRF is most effective when locality is enforced, experimental budgets are limited, and target panels contain overlapping neighborhoods. MT-RaRF therefore makes locality-driven models practical and affordable for multi-target screening in asymmetric catalysis.
- 28 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 20235-20246
Enabling Data-Efficient Machine Learning through Multi-Target Training Set Design via Greedy Neighborhood Coverage
Machine learning is increasingly used to guide asymmetric catalysis, but each enantioselectivity measurement remains experimentally expensive. Prior work established that predictive accuracy in these datasets is dominated by reactions that are structurally similar to the target, motivating neighborhood-restricted models, such as radius-based random forests (RaRF). However, realistic screening campaigns require predictions for many related targets simultaneously (e.g., 20–50 reactions in a scope), and selecting training data independently for each target can be redundant because target neighborhoods overlap. Here, we frame multi-target training set design as a neighborhood multi-coverage problem, where the goal is to select a compact shared set of experiments such that each target retains at least one neighbor within a given similarity radius in reaction fingerprint space. We introduce MT-RaRF, a greedy neighborhood-coverage algorithm that prioritizes candidate experiments that satisfy the remaining local-neighbor needs of underserved targets while exploiting overlap among neighborhoods. Across several previously curated asymmetric catalysis datasets, MT-RaRF can use only a fraction of the experiments required by independent RaRF while maintaining comparable mean absolute errors. Systematic comparisons across similarity radii, training budgets, and target-set distributions establish practical guidelines for prospective use: MT-RaRF is most effective when locality is enforced, experimental budgets are limited, and target panels contain overlapping neighborhoods. MT-RaRF therefore makes locality-driven models practical and affordable for multi-target screening in asymmetric catalysis.
- 26 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 20392-20403
Non-innocent Bromide Redirects Sulfur Oxygenation through O–O Bond Cleavage in a Nonheme Fe(III)–Superoxo System
Thiol dioxygenase chemistry requires nonheme iron centers to activate triplet O2 while controlling a sequence of short-lived Fe/O2 intermediates, O–O bond cleavage or reorganization, and selective oxygen-atom delivery to sulfur. However, the identity and ordering of these intermediates remain difficult to define, and proposed mechanisms differ in whether sulfur oxygenation precedes, accompanies, or follows O–O bond cleavage. Here, we employ density functional theory (DFT) to interrogate the conversion of a metastable side-on Fe(III)–superoxo intermediate to an FeII–sulfinate product in a sulfur-ligated biomimetic system. The calculations show that the expected oxygenation pathways are kinetically disfavored, as direct sulfur oxygenation from the side-on Fe(III)–superoxo species requires a barrier of 22.4 kcal mol–1 and side-on-to-end-on isomerization does not provide an efficient cysteine dioxygenase (CDO)-like oxygen-transfer pathway. Instead, the reaction proceeds through a bromide-assisted O–O cleavage mechanism, in which outer-sphere Br– promotes O–O bond cleavage to generate an FeIV=O(OBr) intermediate as the competent oxygenating species. Subsequent coordination reorganization and second-sphere hydrogen bonding enable sequential oxygen transfer to sulfur, ultimately forming the FeII–sulfinate product. Reaction-coordinate, bonding, and topological analyses show that O–O cleavage is a cooperative bond-reorganization event involving Br–O interaction formation, O–O weakening, and ferryl-like Fe–O strengthening. Comparative Br-assisted, Cl-assisted, and halide-free models further establish that halide participation lowers the O–O cleavage barrier, with Br-assisted cleavage either kinetically favored over or comparable to its Cl-assisted counterpart. These findings reveal a non-innocent role of outer-sphere bromide in modulating the identity of the oxygenating species and the sequence of sulfur oxygenation in this biomimetic nonheme iron system.
- 26 September 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 20392-20403
Non-innocent Bromide Redirects Sulfur Oxygenation through O–O Bond Cleavage in a Nonheme Fe(III)–Superoxo System
Thiol dioxygenase chemistry requires nonheme iron centers to activate triplet O2 while controlling a sequence of short-lived Fe/O2 intermediates, O–O bond cleavage or reorganization, and selective oxygen-atom delivery to sulfur. However, the identity and ordering of these intermediates remain difficult to define, and proposed mechanisms differ in whether sulfur oxygenation precedes, accompanies, or follows O–O bond cleavage. Here, we employ density functional theory (DFT) to interrogate the conversion of a metastable side-on Fe(III)–superoxo intermediate to an FeII–sulfinate product in a sulfur-ligated biomimetic system. The calculations show that the expected oxygenation pathways are kinetically disfavored, as direct sulfur oxygenation from the side-on Fe(III)–superoxo species requires a barrier of 22.4 kcal mol–1 and side-on-to-end-on isomerization does not provide an efficient cysteine dioxygenase (CDO)-like oxygen-transfer pathway. Instead, the reaction proceeds through a bromide-assisted O–O cleavage mechanism, in which outer-sphere Br– promotes O–O bond cleavage to generate an FeIV=O(OBr) intermediate as the competent oxygenating species. Subsequent coordination reorganization and second-sphere hydrogen bonding enable sequential oxygen transfer to sulfur, ultimately forming the FeII–sulfinate product. Reaction-coordinate, bonding, and topological analyses show that O–O cleavage is a cooperative bond-reorganization event involving Br–O interaction formation, O–O weakening, and ferryl-like Fe–O strengthening. Comparative Br-assisted, Cl-assisted, and halide-free models further establish that halide participation lowers the O–O cleavage barrier, with Br-assisted cleavage either kinetically favored over or comparable to its Cl-assisted counterpart. These findings reveal a non-innocent role of outer-sphere bromide in modulating the identity of the oxygenating species and the sequence of sulfur oxygenation in this biomimetic nonheme iron system.
- Open Access
- 2 September 2026
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 24 (34) , 7034-7042
Photophysics of click-functionalized 2,2′-bithienyl flexible Lewis pairs
Stimuli-responsive flexible Lewis pairs modified using click chemistry show variable temperature solvent dependent absorption and emission response.
- 2 September 2026
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 24 (34) , 7034-7042
Open AccessPhotophysics of click-functionalized 2,2′-bithienyl flexible Lewis pairs
Stimuli-responsive flexible Lewis pairs modified using click chemistry show variable temperature solvent dependent absorption and emission response.
- Open Access
- 10 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (34) , e8169897
Underexplored Catalysts as General Structures: Application of Machine Learning Techniques for Reaction‐Specific Datasets
General catalysts are usually identified through broad experimental screening to find structures that perform reliably across many substrates and reaction classes. In secondary amine organocatalysis, historical reporting is strongly skewed toward a small set of standard catalysts, leaving many plausible scaffolds underexplored and difficult to evaluate objectively. Here, we apply a bias‐aware machine learning workflow designed for small, uneven datasets to prioritize candidate general catalysts from limited historical data. Within the iminium‐based reaction space used to construct the curated and virtually balanced dataset, this analysis surfaced several high‐performing candidates, including a rarely studied imidazolidinone bearing a benzyl‐protected indole substituent. Despite minimal precedent, this scaffold performed competitively in experimental benchmarking and external transferability tests. In a retrospective analysis restricted to pre‐2005 examples, the same workflow prioritized catalyst families that later became widely adopted (e.g., diarylprolinol silyl ethers and imidazolidinones) among its top candidates, consistent with earlier prioritization from the literature available at the time. Together, these results show how bias‐aware modeling can highlight overlooked scaffolds and reduce the experimental burden required to identify broadly useful catalysts. Pairing targeted experiments with data‐driven prioritization provides a practical route to expanding the set of reliable secondary‐amine catalysts beyond the structures that dominate current practice.
- 10 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (34) , e8169897
Open AccessUnderexplored Catalysts as General Structures: Application of Machine Learning Techniques for Reaction‐Specific Datasets
General catalysts are usually identified through broad experimental screening to find structures that perform reliably across many substrates and reaction classes. In secondary amine organocatalysis, historical reporting is strongly skewed toward a small set of standard catalysts, leaving many plausible scaffolds underexplored and difficult to evaluate objectively. Here, we apply a bias‐aware machine learning workflow designed for small, uneven datasets to prioritize candidate general catalysts from limited historical data. Within the iminium‐based reaction space used to construct the curated and virtually balanced dataset, this analysis surfaced several high‐performing candidates, including a rarely studied imidazolidinone bearing a benzyl‐protected indole substituent. Despite minimal precedent, this scaffold performed competitively in experimental benchmarking and external transferability tests. In a retrospective analysis restricted to pre‐2005 examples, the same workflow prioritized catalyst families that later became widely adopted (e.g., diarylprolinol silyl ethers and imidazolidinones) among its top candidates, consistent with earlier prioritization from the literature available at the time. Together, these results show how bias‐aware modeling can highlight overlooked scaffolds and reduce the experimental burden required to identify broadly useful catalysts. Pairing targeted experiments with data‐driven prioritization provides a practical route to expanding the set of reliable secondary‐amine catalysts beyond the structures that dominate current practice.
- Open Access
- 10 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (34) , e8169897
Underexplored Catalysts as General Structures: Application of Machine Learning Techniques for Reaction‐Specific Datasets
General catalysts are usually identified through broad experimental screening to find structures that perform reliably across many substrates and reaction classes. In secondary amine organocatalysis, historical reporting is strongly skewed toward a small set of standard catalysts, leaving many plausible scaffolds underexplored and difficult to evaluate objectively. Here, we apply a bias‐aware machine learning workflow designed for small, uneven datasets to prioritize candidate general catalysts from limited historical data. Within the iminium‐based reaction space used to construct the curated and virtually balanced dataset, this analysis surfaced several high‐performing candidates, including a rarely studied imidazolidinone bearing a benzyl‐protected indole substituent. Despite minimal precedent, this scaffold performed competitively in experimental benchmarking and external transferability tests. In a retrospective analysis restricted to pre‐2005 examples, the same workflow prioritized catalyst families that later became widely adopted (e.g., diarylprolinol silyl ethers and imidazolidinones) among its top candidates, consistent with earlier prioritization from the literature available at the time. Together, these results show how bias‐aware modeling can highlight overlooked scaffolds and reduce the experimental burden required to identify broadly useful catalysts. Pairing targeted experiments with data‐driven prioritization provides a practical route to expanding the set of reliable secondary‐amine catalysts beyond the structures that dominate current practice.
- 10 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (34) , e8169897
Open AccessUnderexplored Catalysts as General Structures: Application of Machine Learning Techniques for Reaction‐Specific Datasets
General catalysts are usually identified through broad experimental screening to find structures that perform reliably across many substrates and reaction classes. In secondary amine organocatalysis, historical reporting is strongly skewed toward a small set of standard catalysts, leaving many plausible scaffolds underexplored and difficult to evaluate objectively. Here, we apply a bias‐aware machine learning workflow designed for small, uneven datasets to prioritize candidate general catalysts from limited historical data. Within the iminium‐based reaction space used to construct the curated and virtually balanced dataset, this analysis surfaced several high‐performing candidates, including a rarely studied imidazolidinone bearing a benzyl‐protected indole substituent. Despite minimal precedent, this scaffold performed competitively in experimental benchmarking and external transferability tests. In a retrospective analysis restricted to pre‐2005 examples, the same workflow prioritized catalyst families that later became widely adopted (e.g., diarylprolinol silyl ethers and imidazolidinones) among its top candidates, consistent with earlier prioritization from the literature available at the time. Together, these results show how bias‐aware modeling can highlight overlooked scaffolds and reduce the experimental burden required to identify broadly useful catalysts. Pairing targeted experiments with data‐driven prioritization provides a practical route to expanding the set of reliable secondary‐amine catalysts beyond the structures that dominate current practice.
- Open Access
- 29 May 2026
- Published by Springer Nature in Communications Chemistry
- Vol. 9 (1)
One pot sulfur(IV) fluoride-mediated deoxyaminations for the syntheses of 3,3-arylamino oxetanes and azetidines
Functionalized oxetanes and azetidines are promising bioisosteres, yet their inclusion in agrochemical and pharmaceutical candidate screening remains limited due to a lack of viable synthetic methods. Herein, we utilize XtalFluor-E® to prepare 3,3-arylamino oxetanes and 3,3-arylamino azetidines in moderate-to-high yields (30-97%) using a mild, one-step deoxyamination strategy. This work establishes a direct deoxyamination using suflur (IV) fluoride reagents. We coupled experimental screening with multivariate linear regression (MLR) analysis to gain greater insight regarding factors that influence the reaction scope. Furthermore, experiments paired with density functional theory (DFT) calculations provided key mechanistic insight into the nucleophilic substitution reactions at the sulfur(IV) center. The simplicity and short reaction times of our protocol facilitates the library syntheses of these key bioisosteres.
- 29 May 2026
- Published by Springer Nature in Communications Chemistry
- Vol. 9 (1)
Open AccessOne pot sulfur(IV) fluoride-mediated deoxyaminations for the syntheses of 3,3-arylamino oxetanes and azetidines
Functionalized oxetanes and azetidines are promising bioisosteres, yet their inclusion in agrochemical and pharmaceutical candidate screening remains limited due to a lack of viable synthetic methods. Herein, we utilize XtalFluor-E® to prepare 3,3-arylamino oxetanes and 3,3-arylamino azetidines in moderate-to-high yields (30-97%) using a mild, one-step deoxyamination strategy. This work establishes a direct deoxyamination using suflur (IV) fluoride reagents. We coupled experimental screening with multivariate linear regression (MLR) analysis to gain greater insight regarding factors that influence the reaction scope. Furthermore, experiments paired with density functional theory (DFT) calculations provided key mechanistic insight into the nucleophilic substitution reactions at the sulfur(IV) center. The simplicity and short reaction times of our protocol facilitates the library syntheses of these key bioisosteres.
- 15 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (21) , 21545-21557
Data-Driven Interrogation of Reactivity in Acid-Catalyzed Carbonyl–Olefin Metathesis with Machine Learning and Large Language Models
Carbonyl–olefin metathesis (COM) has emerged as a powerful yet mechanistically complex transformation for forging carbon–carbon bonds. Although diverse Brønsted and Lewis acid catalysts enable COM reactivity, predicting which catalyst will be effective for a given substrate remains challenging. Likewise, machine learning (ML) and large language models (LLMs) are emerging tools for planning experiments in organic synthesis, but their relative strengths in mechanistically rich catalytic systems like COM remain unclear. Here we address both challenges through a practical ML framework that combines a rigorously curated, blinded data set of 147 COM reactions with tiered predictive models to guide catalyst and substrate selection. A Morgan-fingerprint baseline enables rapid structure-based screening, while quantum-derived descriptor models achieve higher accuracy (R2 ≈ 0.92) and retain performance on external substrates; feature-importance and SHAP analyses identify catalyst HOMO energy, dimerization propensity, and substrate carbonyl polarization as dominant drivers of reactivity. Reactivity-cliff analysis distinguishes smoothly interpolating catalysts, such as FeCl3 and ZnCl2, from cliff-rich ion-pair systems, identifying regions where predictions are intrinsically unreliable and targeted experiments are most informative. Variance-guided Bayesian optimization recovers most full-model performance using only ∼40% of the reaction matrix, while a parallel GPT-4o-guided, code-free acquisition protocol offers a lower-barrier alternative that outperforms random sampling and, in this setting, exceeds expert selection. Together, these results establish a mechanistically interpretable, data-efficient framework for predicting, explaining, and prioritizing COM experiments in a controlled reaction matrix, and show how uncertainty-aware ML and LLM-guided selection can augment decision-making in mechanistically related COM systems.
- 15 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (21) , 21545-21557
Data-Driven Interrogation of Reactivity in Acid-Catalyzed Carbonyl–Olefin Metathesis with Machine Learning and Large Language Models
Carbonyl–olefin metathesis (COM) has emerged as a powerful yet mechanistically complex transformation for forging carbon–carbon bonds. Although diverse Brønsted and Lewis acid catalysts enable COM reactivity, predicting which catalyst will be effective for a given substrate remains challenging. Likewise, machine learning (ML) and large language models (LLMs) are emerging tools for planning experiments in organic synthesis, but their relative strengths in mechanistically rich catalytic systems like COM remain unclear. Here we address both challenges through a practical ML framework that combines a rigorously curated, blinded data set of 147 COM reactions with tiered predictive models to guide catalyst and substrate selection. A Morgan-fingerprint baseline enables rapid structure-based screening, while quantum-derived descriptor models achieve higher accuracy (R2 ≈ 0.92) and retain performance on external substrates; feature-importance and SHAP analyses identify catalyst HOMO energy, dimerization propensity, and substrate carbonyl polarization as dominant drivers of reactivity. Reactivity-cliff analysis distinguishes smoothly interpolating catalysts, such as FeCl3 and ZnCl2, from cliff-rich ion-pair systems, identifying regions where predictions are intrinsically unreliable and targeted experiments are most informative. Variance-guided Bayesian optimization recovers most full-model performance using only ∼40% of the reaction matrix, while a parallel GPT-4o-guided, code-free acquisition protocol offers a lower-barrier alternative that outperforms random sampling and, in this setting, exceeds expert selection. Together, these results establish a mechanistically interpretable, data-efficient framework for predicting, explaining, and prioritizing COM experiments in a controlled reaction matrix, and show how uncertainty-aware ML and LLM-guided selection can augment decision-making in mechanistically related COM systems.
- 9 January 2026
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 91 (1) , 1-4
Context Rules! Special Issue on “Physical Organic Chemistry: Never Out of Style”
- 9 January 2026
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 91 (1) , 1-4
Context Rules! Special Issue on “Physical Organic Chemistry: Never Out of Style”