Mirza Jabbar Aziz Baig

The Internet of Things (IoT) serves as a key component to enhance operational efficiency and decision-making in the context of supervisory control and data acquisition (SCADA) systems. Featuring the improved system robustness and real-time parameters, including images of the load, a new design of SCADA system monitoring for a photovoltaic (PV) system based on dual IoT platforms is proposed in this paper. Two voltage sensors collect the voltages of the PV module and the battery, while three current sensors accumulate the current data from the PV module, the battery, and the load. ESP32-E assembles the data and then transmits them to the Arduino Cloud via MQTT for real-time display and ESP32-S3 via HTTP. The relay and the load are controlled by ESP32-E to turn ON/OFF based on the battery voltage as well. In addition, ESP32-S3 forwards the received data to ThingSpeak for advanced analysis, data storage, and real-time display via HTTP. The load images are also displayed on a camera web server built by ESP32-S3. Successfully monitoring for over 20 days, the proposed system demonstrated its robustness and versatility even during the downtime of the Arduino Cloud, with a one-day voltage measurement ranging to a maximum of 13 V and current ranging from zero amperes to 4.42 amperes. To add to this system, it incorporates visual load monitoring features, which are unseen in traditional systems.

To overcome the issues of the existing properties and the non-configurable supervisory control and data acquisition (SCADA) architecture, this paper proposes an IoT-centered open-source SCADA system for monitoring photovoltaic (PV) systems. The system consists of three voltage sensors and three current sensors for data accumulation from the PV panel, the battery, and the load. As a part of the system design, a relay is used that controls the load remotely. An ESP32-E microcontroller transmits the collected data to a Banana Pi M4 Berry (BPI-M4 Berry) through the Message Queuing Telemetry Transport (MQTT) protocol over a privately established communication channel using Wi-Fi. The ESP32-E is configured as the MQTT publisher and the BPI-M4 Berry serves as the MQTT broker. Locally installed on the BPI-M4 Berry, the Node-RED platform creates highly customizable dashboards as human–machine interfaces (HMIs) to achieve real-time monitoring of the PV system. The proposed system was successfully tested to collect the PV system voltage/current/power data and to control the load in a supervisory way under a laboratory setup. The complete SCADA architecture details and test results for the PV system data during the total eclipse on 8 April 2024 and another day are presented in this paper.

At present, hybrid renewable power systems (HRPS) are considered reliable combinations for power generation under various conditions. The challenge facing researchers and engineers today is designing and implementing a reliable, efficient, and applicable SCADA system for adequate monitoring and control of hybrid power systems. In order to analyze, observe, and control the essential parameters of an HRPS, a SCADA system is crucial. As part of this study, a low-cost, low-power, open-source SCADA (Supervisory, Control, and Data Acquisition) system for hybrid renewable energy systems is presented. The system utilizes two remote terminal units (RTUs), an Arduino Mega2560 and a Wio terminal, to communicate with all actuators and measure vital system characteristics such as voltage, current, and power. Using the Firmata protocol, a laptop serves as the main terminal unit (MTU) to communicate with the Arduino. In addition to being the system’s central component, Node-Red is utilized for processing, analyzing, storing, and displaying data. In contrast, a Wio terminal is used to display the values of all sensors in real-time on its LCD screen. As a whole, the proposed SCADA system is designed to keep the HRPS running smoothly and safely by displaying vital parameters, reporting any significant faults, and controlling the generator so that the batteries can be charged and discharged correctly. This article presents a complete description of all algorithms, experimental setups, testing, and results.

The intimidating surge in the procurement of Distributed Energy Resources (DER) has increased the number of prosumers, creating a new possibility of local energy trading across the community. This project aims to formulate the peer-to-peer energy (P2P) sharing model to encourage the DERs to share surplus energy among the consumers. An effective pricing method is developed based on the supply-demand ratio (SDR) with the importance of self-optimization, which allows the prosumers to maximize their energy sharing and profits. To implement this pricing method, a simplified dynamic matchmaking algorithm has been deployed to introduce the Outstanding Prosumer to interact with existing consumers to increase the efficiency and profitability of the trade network. Consumers also benefit from this model, as they can pick the most economical energy supplier instead of relying on the utility grid. The prosumer with high excess energy and the consumer with the highest energy demand will be prioritized to maintain the SDR ratio to one or greater than one. Here, all the above-stated features of the peer-to-peer energy trading have been demonstrated with some calculations to back up some tangible results. Finally, a case study is simulated among the residents of Dhaka, Bangladesh, to demonstrate how peers can profit from participating in trading at a given time. Comparing the results with and without P2P trading, there has been a 17.54% reduction in an electric bill on a typical day of July, and a 49.53% reduction in the interaction with the grid.

Renewable energy resources have been gaining ground in recent years and we are on the verge of a decentralized energy market with consumers becoming prosumers. Platforms that facilitate peer-to-peer (P2P) sale or purchase of energy are therefore essential. This paper presents a way to trade energy across P2P networks using blockchain technology. The main server is a Raspberry Pi 4 Model B (Pi4B), on which the user interface (UI) as well as the private Ethereum blockchain are configured. The blockchain also implements a smart contract. For the purpose of developing the UI that provides assistance in conducting trading activities, an open-source Angular framework is used. Also explored in the study is the development of an Internet of Things (IoT) server using the latest ESP32-S3 microcontroller. The field instrumentation devices (FIDs) are connected to the microcontroller for the purpose of data acquisition and for subsequent transmission to an IoT server. The blockchain network maintains a record of all transactions in an immutable manner. Assuring security is achieved through a local configuration of the system, hosted on a private network with restricted access. For the purposes of information security and data integrity, additional security measures are also considered, such as a secret recovery phrase, firewalls, login credentials and private key. Among the servers and clients, there is an implementation of a Hypertext Transfer Protocol. The P2P energy trading approach involving renewable energy designed for remote communities is explained and illustrated in this paper.

Design and implementation of an open-source-based supervisory control and data acquisition (SCADA) system for a community solar-powered reverse osmosis are presented in this paper. A typical SCADA system available on the market is proprietary and has a high initial and maintenance cost. Aside from that, there is no SCADA system with an alert system available to give users updates and status information concerning the system. The objective of this study is to develop a comprehensive SCADA design that takes advantage of open-source technology to address the world’s most pressing problem, access to clean water. The designed reverse Osmosis system also uses renewable energy-based power sources. In this system, all data is stored and analyzed locally, which ensures the data is secure and allows the user to make data-driven decisions based on the collected data. Among the main components of this system are the field instrument devices (FIDs), the remote terminal unit (RTU), the main terminal units (MTUs), the web-based programming software, and the data analytics software. The Node-Red programming and dashboard tool, Grafana for data analytics, and InfluxDB for database management run on the main terminal unit having Debian operating system. Data is transmitted from the FIDs to the RTU, which then redirects it to the MTU via serial communication. Node-Red displays the data processed by the MTU on its dashboard as well, as the data is stored locally on the MTU and is displayed by means of Grafana, which is also installed on the same MTU. Through the Node-Red dashboard, the system is controlled, and notifications are sent to the community.

This article describes a low-cost Supervisory Control and Data Acquisition (SCADA) system for a PV plant with local data logging. Typically, SCADA systems that are available on the market are proprietary (commercial), which are expensive and individually configured for a particular site. The main objective of this paper is to design a low-cost and open-source monitoring solution (hardware and software) to meet the requirements. The hardware used for this SCADA consisted of Arduino, Raspberry Pi, sensors, serial communication cables, and an open-source web view platform. This open-source platform manipulates, logs, and visualizes PV and environmental data. Emoncms runs on the Debian operating system. Field instruments were connected to two remote terminal units (RTUs). A PV array provided data to the RTU1, while an inverter output provided data to the RTU2, and the Raspberry Pi received the collected data in JSON format. As these data arrived, Emoncms used Emonhub as its main module, which refines data and then displays it on Emoncms’s WebView. The Raspberry Pi also stores data locally. Data logging was tested for 6 h, but the final results showed that data logging can last much longer. From an hour to a year, the data trend can be viewed on a user-friendly dashboard.

A low-cost, open-source peer-to-peer (P2P) energy trading system for a remote community is presented in this paper. As a result of its geographic location, this community has never been able to access electricity and other modern amenities. This study aims to design and implement a P2P energy trading system for this remote community that allows residents to take advantage of distributed energy resources. A Raspberry Pi 4 Model B (Pi4B) hosts the main server of the trading system that includes the user interface and a local Ethereum blockchain server. The Ethereum blockchain is used to deploy smart contracts. The Internet-of-Things (IoT) servers run on ESP32 microcontrollers. Sensors and actuators connected to the ESP32 are field instrumentation devices that facilitate acquiring, monitoring, and transferring energy data in real-time. To perform trading activities, React.JS open-source library was used to develop the blockchain-enabled user interface. An immutable blockchain network keeps track of all transactions. The proposed system runs on a local Wi-Fi network with restricted authorization for system security. Other security measures such as login credentials, private key, firewall, and secret recovery phrases are also considered for information security and data integrity. A Hypertext Transfer Protocol is implemented for communication between the servers and the client. This explains the overall system design, implementation, testing, and results.

The car industry is entering a new age due to electric energy as a fuel in the contemporary era. Electric batteries are being more widely used in the automobile sector these days. As a result, the inner workings of these battery systems must be fully comprehended. There is currently no accurate model for predicting an electric car battery’s state of health (SOH). This study aims to use machine learning to develop a reliable SOH prediction model for batteries. A correct optimal method was also constructed to drive the modeling process in the right direction. Extensive simulations were performed to verify the accuracy of the suggested methodology. A state of health method for data processing was developed. The method involves a complex data-driven model combining Big Data, Artificial Intelligence (A.I.), and the Internet of Things (IoT) technologies. To establish the most effective technique for certifying the actual condition of real-life battery health, researchers compared the accuracy and performance of several states of health models. For improved understanding and prediction of the condition of health behavior, data-driven modeling has certain significant advantages over older methodologies. The methods used in this study can be seen as a revolutionary low-cost, high-accuracy, and dependable approach to understanding and analyzing the state of health of batteries. At first, an intelligent model was created using a data-driven modeling strategy. Secondly, the concurrent battery data are qualified using the data-driven model. The machine learning (ML) method creates a very accurate and dependable model for forecasting battery health in real-world scenarios. Third, the previously established ML model was used to develop a knowledge-based online service for battery health. This web service can be used to test battery health, monitor battery behavior, and perform a variety of other tasks. A variety of similar solutions for diverse systems can be derived using the same technique. The default efficiency of the ML algorithmic module, R-Squared (R2), and Mean Square Error (MSE) were also utilized as performance measures. The R2 as a standard is used to examine the effectiveness of a fit. The result is a value between 0 and 1, with 1 indicating a better model fit. MSE stands for mean squared error. A lower MSE number implies superior model performance, since it reflects how close the parameter estimates are to the actual values. The training set of the battery model had a score of 0.9999, whereas the testing set had a score of 0.9995. The R2 score was one, with an M.S.E. of 0.03. As a result of these three indicators, the data-driven ML model used in this study proved to be accurate.