QWQianghua Wu

Qianghua Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qianghua Wu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:

  • Baojun Qu

    CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei 230026, Anhui, China

    2 shared publications
  • Dahong Yao

    Department of Polymer Science and Engineering, University of Science and Technology of China, 230026 Hefei, Anhui, People's Republic of China

    1 shared publication
  • Lei Ye

    Key Laboratory of Soft Matter Chemistry (Chinese Academy of Sciences), Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui, China 230026

    1 shared publication
  • Lizhao Xie

    CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, P. R. China

    1 shared publication
  • Mei Sun

    Hefei National Laboratory for Physical Sciences at Microscale, University of Science and Technology of China, Hefei 230026, Anhui, China

    1 shared publication
  • Mozhen Wang

    CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, P. R. China

    1 shared publication

Latest Publications

  • Effects of an intercalating agent on the morphology and thermal and flame‐retardant properties of low‐density polyethylene/layered double hydroxide nanocomposites prepared by melt intercalation

    by Lei Ye, Qianghua Wu

    The effects of an intercalating agent on the morphology and thermal and flame‐retardant properties of low‐density polyethylene (LDPE)/layered double hydroxide (LDH) nanocomposites were studied with Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, microscale combustion calorimetry, thermogravimetric analysis, and mechanical property measurements. X‐ray diffraction and transmission electron microscopy demonstrated that after intercalation with stearate anion (SA) or dodecyl sulfate anion (DS), organo‐LDH could be nanodispersed in an LDPE matrix with exfoliated structures or intercalated structures simultaneously with partially exfoliated structures, respectively, via melt intercalation. However, the unmodified LDH composites yielded only microcomposites. Microscale combustion calorimetry, thermogravimetric analysis, and dynamic Fourier transform infrared spectra showed the following order for the flame‐retardant and thermal properties: LDPE/SA‐modified LDH > LDPE/DS‐modified LDH > LDPE/NO3‐modified LDH > LDPE. The higher performance of the LDPE/LDH nanocomposites with respect to flame retardance and thermal stability could be attributed to the better dispersion state of the LDH layers in the LDPE matrix and the greater hindrance effect of LDH layers on the diffusion of oxygen and volatile products throughout the composite materials when they were exposed to burning or thermal degradation. The tensile strength and elongation at break of the LDPE/LDH nanocomposites decreased to some extent because of the decrease in the crystallinity of the LDPE matrix. A transmittance test showed that the transparency of the exfoliated LDPE/SA‐modified LDH nanocomposite was very close to that of neat LDPE. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011


  • Photocrosslinking of halogen‐free flame‐retarded ethylene‐vinyl acetate copolymer by phosphorous‐nitrogen compound NP28

    by Qianghua Wu, Baojun Qu, Mei Sun

    The photoinitiated crosslinking of halogen‐free flame‐retarded ethylene‐vinyl acetate copolymer (EVA) by the phosphorous‐nitrogen compound NP28 in the presence of photoinitiator and crosslinker and characterization of the related properties have been investigated by gel determination, heat extension test, thermogravimetric analysis (TGA), mechanical measurement, and thermal aging test. The photocrosslinking efficiency of EVA/NP28 blend and various factors affecting the crosslinking process, such as photoinitiator, crosslinker, NP28 content, and irradiation temperature, were studied in detail and optimized by comparison of gel content. The results show that the EVA/NP28 blend filled with 28.2 wt % NP28 with a thickness of 1.6 mm is homogeneously photocrosslinked to a gel content of above 80 wt % with 4.8 s UV‐irradiation under optimum conditions. The data from TGA, mechanical measurement, and thermal aging test give evidence that the thermal stability and mechanical properties of photocrosslinked EVA/NP28 blend are much better than those of the unphotocrosslinked one.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009


  • Photoinitiated crosslinking of ethylene‐vinyl acetate copolymers and characterization of related properties

    by Dahong Yao, Baojun Qu, Qianghua Wu

    Photoinitiated crosslinking of EVA in the presence of benzophenone (BP) as photoinitiator and triallyl isocyanurate (TAIC) as crosslinker and characterization of the related properties have been studied by gel determination, heat extension, DSC, DMTA, TGA, and mechanical measurements. The photoinitiated crosslinking efficiency of the EVA‐BP‐TAIC system and various factors affecting the crosslinking process, such as photoinitiator and crosslinker and their concentrations, irradiation temperature, and irradiation atmosphere were studied in detail and optimized by comparison of gel contents. The results show that the EVA samples with a thickness of 1 mm are readily crosslinked to a gel content of above 80% with 5 s UV‐irradiation under optimum conditions. The data from the heat extension and DSC show that the crosslinking density of photocrosslinked EVA increase and their crystallinities decrease with increasing the UV‐irradiation time. At the same time, photocrosslinking of EVA leads to a lowering of the melt temperature and a decrease of heat of fusion. The DMTA results show that photocrosslinking increases the amorphous phase and storage modulus of the crosslinked EVA, but does not change the glass transition temperature. The data from TGA and mechanical tests give evidence that the thermal stability and mechanical properties of photocrosslinked EVA samples are much better than those of the uncrosslinked EVA. POLYM. ENG. SCI., 47:1761–1767, 2007. © 2007 Society of Plastics Engineers