Fatma İlHan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Fatma İlHan has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Ali Aygun
Selcuk University
2 shared publications - Ayşe Nur Tanış
Selcuk Universitesi
2 shared publications - Ismail Keskin
Selcuk Universitesi
2 shared publications - Adile Özbay
Selcuk Universitesi
1 shared publication - Fulya Özdil
Namık Kemal Üniversitesi
1 shared publication - Hüseyin Bayır1 shared publication
Latest Publications
- 27 February 2026
- Published by Springer Nature in Molecular Biology Reports
- Vol. 53 (1) , 441
Decision tree-based evaluation of IGF-1 and CAST gene polymorphisms associated with morphometric traits in sheep
Background The IGF-1 (insulin-like growth factor) and CAST (calpastatin) genes have been reported to influence several economically important productivity traits in sheep. This study aimed to investigate the relationship between the genotypes of these two genes, identified by PCR-RFLP (Polymerase Chain Reaction–Restriction Fragment Length Polymorphism) analysis, and growth-related characteristics in Anatolian Merino and Akkaraman sheep. Methods and results In addition to live weight (LW), morphometric measurements including rump height (RH), withers height (WH), body length (BL), chest depth (CD), chest width (CW), and chest circumference (CC) were recorded. IGF-1 genotypes were identified using HaeIII digestion, revealing three genotypes (CC, CG, and GG), while CAST genotypes were determined by MspI digestion, yielding two genotypes (MM and MN). Associations between genotypes and traits were evaluated through analysis of variance and CHAID regression tree analysis, and breed comparisons were performed using t-tests. Anatolian Merino sheep exhibited higher LW, BL, CW, and CC, whereas Akkaraman sheep showed greater RH and WH. No significant association between IGF-1 genotypes and morphometric traits was observed in Anatolian Merino sheep; however, in Akkaraman sheep, the IGF-1 GG genotype was significantly associated with higher LW, RH, WH, CW, and CC. CAST genotypes were not related to any of the examined traits, and regression tree analysis supported these results. Conclusions Overall, the results suggest that IGF-1 genotypes, particularly GG, could be valuable for marker-assisted selection (MAS) programmes targeting live weight and body measurements in sheep.
- 27 February 2026
- Published by Springer Nature in Molecular Biology Reports
- Vol. 53 (1) , 441
Decision tree-based evaluation of IGF-1 and CAST gene polymorphisms associated with morphometric traits in sheep
Background The IGF-1 (insulin-like growth factor) and CAST (calpastatin) genes have been reported to influence several economically important productivity traits in sheep. This study aimed to investigate the relationship between the genotypes of these two genes, identified by PCR-RFLP (Polymerase Chain Reaction–Restriction Fragment Length Polymorphism) analysis, and growth-related characteristics in Anatolian Merino and Akkaraman sheep. Methods and results In addition to live weight (LW), morphometric measurements including rump height (RH), withers height (WH), body length (BL), chest depth (CD), chest width (CW), and chest circumference (CC) were recorded. IGF-1 genotypes were identified using HaeIII digestion, revealing three genotypes (CC, CG, and GG), while CAST genotypes were determined by MspI digestion, yielding two genotypes (MM and MN). Associations between genotypes and traits were evaluated through analysis of variance and CHAID regression tree analysis, and breed comparisons were performed using t-tests. Anatolian Merino sheep exhibited higher LW, BL, CW, and CC, whereas Akkaraman sheep showed greater RH and WH. No significant association between IGF-1 genotypes and morphometric traits was observed in Anatolian Merino sheep; however, in Akkaraman sheep, the IGF-1 GG genotype was significantly associated with higher LW, RH, WH, CW, and CC. CAST genotypes were not related to any of the examined traits, and regression tree analysis supported these results. Conclusions Overall, the results suggest that IGF-1 genotypes, particularly GG, could be valuable for marker-assisted selection (MAS) programmes targeting live weight and body measurements in sheep.
- Open Access
- 18 December 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (24) , 12156
Associations of Candidate Gene Polymorphisms with Egg Production and Egg Quality Traits in Atak-S Laying Hens
This study aimed to investigate the relationship between GH, GHR, IGF-1R, VIP, and NPY genes and egg quality traits in laying hens. Atak-S laying hens aged 54 weeks were monitored for 6 weeks. Egg production and egg weight were recorded daily, while egg quality traits and feed consumption were assessed weekly. Genotyping was performed using PCR-RFLP. The GH, GHR, IGF-1R, VIP, and NPY genes were cut with MspI, HindIII, HinfI, HinfI, and DraI, respectively. The AA genotype of the GH gene was associated with increased egg shape index, eggshell weight, and eggshell thickness (p < 0.05). In the IGF-1R region, significant associations were found with egg weight and egg shape index (p < 0.05). Additionally, the VIP12 TT genotype was linked to higher egg production (p < 0.05). These findings suggest that the GH gene may serve as a selection marker for shell-related traits, IGF-1R for egg weight and egg shape, and VIP for improving egg production. Overall, the results obtained in this study indicate that the genes studied have the potential to be candidate markers for improving egg performance and quality; however, their use in marker-assisted selection requires further studies in larger and more diverse populations.
- 18 December 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (24) , 12156
Open AccessAssociations of Candidate Gene Polymorphisms with Egg Production and Egg Quality Traits in Atak-S Laying Hens
This study aimed to investigate the relationship between GH, GHR, IGF-1R, VIP, and NPY genes and egg quality traits in laying hens. Atak-S laying hens aged 54 weeks were monitored for 6 weeks. Egg production and egg weight were recorded daily, while egg quality traits and feed consumption were assessed weekly. Genotyping was performed using PCR-RFLP. The GH, GHR, IGF-1R, VIP, and NPY genes were cut with MspI, HindIII, HinfI, HinfI, and DraI, respectively. The AA genotype of the GH gene was associated with increased egg shape index, eggshell weight, and eggshell thickness (p < 0.05). In the IGF-1R region, significant associations were found with egg weight and egg shape index (p < 0.05). Additionally, the VIP12 TT genotype was linked to higher egg production (p < 0.05). These findings suggest that the GH gene may serve as a selection marker for shell-related traits, IGF-1R for egg weight and egg shape, and VIP for improving egg production. Overall, the results obtained in this study indicate that the genes studied have the potential to be candidate markers for improving egg performance and quality; however, their use in marker-assisted selection requires further studies in larger and more diverse populations.
- Open Access
- 21 October 2024
- Published by National Documentation Centre (EKT) in Journal of the Hellenic Veterinary Medical Society
- Vol. 75 (3) , 7669-7674
GH, SEMA3E and TLX gene polymorphism and its association with egg quality traits of quail
This study attempted to determine the relationship between the GH, Sema3E, and TLX genes and egg quality traits using the PCR-RFLP technique in Japanese quail. Three genotypes and two alleles were obtained by cutting the GH gene with the MspI enzyme, the Sema3E gene with the HaeIII enzyme, and the TLX gene with the PstI enzyme. The allele frequency and the frequency of heterozygous genotypes were higher for all genes. There was no statistically significant relationship between egg quality traits and genotypes. However, it was found that the eggs of the animals with the A allele for the GH gene had a higher shape index. Similarly, eggs from animals with the A allele for the Sema3E gene were found to be heavier. In light of previous studies and these results, it is believed that these genes can be used as selection markers for egg quality traits.
- 21 October 2024
- Published by National Documentation Centre (EKT) in Journal of the Hellenic Veterinary Medical Society
- Vol. 75 (3) , 7669-7674
Open AccessGH, SEMA3E and TLX gene polymorphism and its association with egg quality traits of quail
This study attempted to determine the relationship between the GH, Sema3E, and TLX genes and egg quality traits using the PCR-RFLP technique in Japanese quail. Three genotypes and two alleles were obtained by cutting the GH gene with the MspI enzyme, the Sema3E gene with the HaeIII enzyme, and the TLX gene with the PstI enzyme. The allele frequency and the frequency of heterozygous genotypes were higher for all genes. There was no statistically significant relationship between egg quality traits and genotypes. However, it was found that the eggs of the animals with the A allele for the GH gene had a higher shape index. Similarly, eggs from animals with the A allele for the Sema3E gene were found to be heavier. In light of previous studies and these results, it is believed that these genes can be used as selection markers for egg quality traits.
- Open Access
- 29 August 2024
- Published by Selcuk Journal of Agriculture and Food Sciences in Selcuk Journal of Agriculture and Food Sciences
- Vol. 38 (2) , 298-308
Determination of the Factors Affecting the Department Preferences of Selcuk University Faculty of Agriculture Students
Agriculture is one of the priorities and very important fields in Türkiye's economic development, and it should be carried out with scientific methods. In today's faculties of agriculture, education is given in different departments and agricultural engineers who can work in various fields of agriculture are trained. For this reason, it is an important issue that the department chosen by the students should be suitable for them and what the department selection is made according to. This study was conducted to find answers to the questions of whether the students' department preferences have changed according to factors such as age, gender, family work, monthly income of the family, number of siblings, family residence, and the order in which they prefer the Faculty of Agriculture. The data in the study were tested with Chi-Square analysis. As a result of the study, the effect of all factors except the number of siblings and the order of preference on the department preference was found to be statistically significant, and it was concluded that the students consider their personality traits, their interest in agricultural activities, the place of their preferred profession in the society and the employment rate of the profession.
- 29 August 2024
- Published by Selcuk Journal of Agriculture and Food Sciences in Selcuk Journal of Agriculture and Food Sciences
- Vol. 38 (2) , 298-308
Open AccessDetermination of the Factors Affecting the Department Preferences of Selcuk University Faculty of Agriculture Students
Agriculture is one of the priorities and very important fields in Türkiye's economic development, and it should be carried out with scientific methods. In today's faculties of agriculture, education is given in different departments and agricultural engineers who can work in various fields of agriculture are trained. For this reason, it is an important issue that the department chosen by the students should be suitable for them and what the department selection is made according to. This study was conducted to find answers to the questions of whether the students' department preferences have changed according to factors such as age, gender, family work, monthly income of the family, number of siblings, family residence, and the order in which they prefer the Faculty of Agriculture. The data in the study were tested with Chi-Square analysis. As a result of the study, the effect of all factors except the number of siblings and the order of preference on the department preference was found to be statistically significant, and it was concluded that the students consider their personality traits, their interest in agricultural activities, the place of their preferred profession in the society and the employment rate of the profession.
- Open Access
- 29 August 2024
- Published by Selcuk Journal of Agriculture and Food Sciences in Selcuk Journal of Agriculture and Food Sciences
- Vol. 38 (2) , 231-236
Determination of CAST/MspI Polymorphism in Cattle by PCR-RFLP Method
The calpastatin (CAST) gene is one of the genes associated with meat quality. Studies have shown that this gene is associated with quality traits such as body weight gain, carcass yield, meat tenderness and fat content in meat. In this study, the polymorphism of the CAST gene was determined using the PCR-RFLP method in Holstein, Simmental and Brown Swiss cattle. As a result of genotyping, three genotypes (MM, MN and NN) and two alleles (M and N) were determined. It was found that the MM genotype and the M allele had the highest frequency in all breeds examined, while the NN genotype had the lowest frequency. The NN genotype was only found in the Brown Swiss breed. All Simmental animals used in the study belonged to the MM genotype.
- 29 August 2024
- Published by Selcuk Journal of Agriculture and Food Sciences in Selcuk Journal of Agriculture and Food Sciences
- Vol. 38 (2) , 231-236
Open AccessDetermination of CAST/MspI Polymorphism in Cattle by PCR-RFLP Method
The calpastatin (CAST) gene is one of the genes associated with meat quality. Studies have shown that this gene is associated with quality traits such as body weight gain, carcass yield, meat tenderness and fat content in meat. In this study, the polymorphism of the CAST gene was determined using the PCR-RFLP method in Holstein, Simmental and Brown Swiss cattle. As a result of genotyping, three genotypes (MM, MN and NN) and two alleles (M and N) were determined. It was found that the MM genotype and the M allele had the highest frequency in all breeds examined, while the NN genotype had the lowest frequency. The NN genotype was only found in the Brown Swiss breed. All Simmental animals used in the study belonged to the MM genotype.
- 27 November 2023
- Published by T.C. Tarim ve Orman Bakanligi in Bee Studies- Apiculture Research Institute
PCA and LDA Assessment of the Heavy Metal Contamination in Honey Bees, Bee Pollen and Honey Produced in Urban Areas of Türkiye
Heavy metals are of great importance in terms of environmental pollution. Environmental pollution affects not only humans but also plants and animals. Living organisms with varying sensitivity to various pollutants can be used to assess environmental pollution. Honey bees have been used as bioindicators for this purpose because they operate in very large areas in their region. The aim of this study is to investigate heavy metal pollution in honey bees and bee products in 4 different urban regions of Konya using principal component analysis (PCA) and linear discriminant analysis. In this study, when the heavy metal contents of honey bees, bee pollen, and honey samples are compared, it is seen that bees are exposed to more heavy metal contamination. Honey bees don’t reflect these amounts in the honey, and the heavy metal content in honey remains in much smaller amounts. When principal component analysis (PCA) is applied to these samples, the heavy metal variation of bees and bee pollen can be explained by three components, while the variation of the heavy metal contents of honey can be explained by four components. Linear discriminant analysis was performed to distinguish the geographic locations of the samples. According to the results of the LDA analysis for heavy metal content, the bees can be assigned to 80% and the pollen and honey to 100% of their correct geographical origin.
- 27 November 2023
- Published by T.C. Tarim ve Orman Bakanligi in Bee Studies- Apiculture Research Institute
PCA and LDA Assessment of the Heavy Metal Contamination in Honey Bees, Bee Pollen and Honey Produced in Urban Areas of Türkiye
Heavy metals are of great importance in terms of environmental pollution. Environmental pollution affects not only humans but also plants and animals. Living organisms with varying sensitivity to various pollutants can be used to assess environmental pollution. Honey bees have been used as bioindicators for this purpose because they operate in very large areas in their region. The aim of this study is to investigate heavy metal pollution in honey bees and bee products in 4 different urban regions of Konya using principal component analysis (PCA) and linear discriminant analysis. In this study, when the heavy metal contents of honey bees, bee pollen, and honey samples are compared, it is seen that bees are exposed to more heavy metal contamination. Honey bees don’t reflect these amounts in the honey, and the heavy metal content in honey remains in much smaller amounts. When principal component analysis (PCA) is applied to these samples, the heavy metal variation of bees and bee pollen can be explained by three components, while the variation of the heavy metal contents of honey can be explained by four components. Linear discriminant analysis was performed to distinguish the geographic locations of the samples. According to the results of the LDA analysis for heavy metal content, the bees can be assigned to 80% and the pollen and honey to 100% of their correct geographical origin.
- Open Access
- 27 August 2021
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 9 (8) , 1395-1397
Growth Hormone Gene Polymorphism and its Relation to Quail Growth and Carcass
In this study, it was aimed to determine the polymorphism of GH (growth hormone) gene in Japanese quails and the relationships between these genes and body weight and carcass traits. 3 genotypes (AA, AB and BB), 2 (A and B) alleles were detected by cutting the GH intron 1 region with restriction enzyme MspI. As a result of variance analysis, it was determined that the hatching weights of the animals with B allele and liver weights were higher. Thus, it is seen that GH gene and PCR-RFLP technique can be used in breeding studies.
- 27 August 2021
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 9 (8) , 1395-1397
Open AccessGrowth Hormone Gene Polymorphism and its Relation to Quail Growth and Carcass
In this study, it was aimed to determine the polymorphism of GH (growth hormone) gene in Japanese quails and the relationships between these genes and body weight and carcass traits. 3 genotypes (AA, AB and BB), 2 (A and B) alleles were detected by cutting the GH intron 1 region with restriction enzyme MspI. As a result of variance analysis, it was determined that the hatching weights of the animals with B allele and liver weights were higher. Thus, it is seen that GH gene and PCR-RFLP technique can be used in breeding studies.
- Open Access
- 5 April 2012
- Published by Biology Centre, AS CR in European Journal of Entomology
- Vol. 109 (2) , 161-167
Genetic variation in Turkish honeybees Apis mellifera anatoliaca, A. m. caucasica, A. m. meda (Hymenoptera: Apidae) inferred from RFLP analysis of three mtDNA regions (16S rDNA-COI-ND5)
In this study, the genetic structure of Turkish honey bee (Apis mellifera L.) populations, mainly obtained from the Central Anatolian region, were investigated at three different mitochondrial regions. A total of 165 worker bees were collected from 15 different populations in ten different locations. Portions of the mitochondrial 16S ribosomal RNA (16S rDNA), cytochrome C oxidase I (COI) and NADH dehydrogenase 5 (ND5) genes were amplified by PCR and then subjected to RFLP pattern analysis using 18 restriction enzymes (these having at least one recognition site in each region were used). Nucleotide polymorphisms were revealed using restriction enzymes Bsp143I, DraI and SspI in 16S rDNA and TaqI in the COI gene segment. The polymorphisms were subsequently confirmed by direct DNA sequencing with sequences thereafter deposited in Genbank. In this study, six novel composite genotypes (haplotypes) were found in Turkish honey bee populations. The most common haplotype, type 1, was found in 12 of the sampled populations and overall accounted for 85.5% of the samples. TCS spanning network of haplotypes revealed that type 1 was the basal haplotype. Genetic distance (D) values were found to be low (0.0-0.0112) within Turkish honey bee populations. The average haplotype diversity (h) within populations was 0.082. Molecular phylogenetic analysis revealed that Konya/Sizma, Antalya/Elmali and Konya/Sel?uklu populations were the most distant from all the other Turkish honey bee populations surveyed.
- 5 April 2012
- Published by Biology Centre, AS CR in European Journal of Entomology
- Vol. 109 (2) , 161-167
Open AccessGenetic variation in Turkish honeybees Apis mellifera anatoliaca, A. m. caucasica, A. m. meda (Hymenoptera: Apidae) inferred from RFLP analysis of three mtDNA regions (16S rDNA-COI-ND5)
In this study, the genetic structure of Turkish honey bee (Apis mellifera L.) populations, mainly obtained from the Central Anatolian region, were investigated at three different mitochondrial regions. A total of 165 worker bees were collected from 15 different populations in ten different locations. Portions of the mitochondrial 16S ribosomal RNA (16S rDNA), cytochrome C oxidase I (COI) and NADH dehydrogenase 5 (ND5) genes were amplified by PCR and then subjected to RFLP pattern analysis using 18 restriction enzymes (these having at least one recognition site in each region were used). Nucleotide polymorphisms were revealed using restriction enzymes Bsp143I, DraI and SspI in 16S rDNA and TaqI in the COI gene segment. The polymorphisms were subsequently confirmed by direct DNA sequencing with sequences thereafter deposited in Genbank. In this study, six novel composite genotypes (haplotypes) were found in Turkish honey bee populations. The most common haplotype, type 1, was found in 12 of the sampled populations and overall accounted for 85.5% of the samples. TCS spanning network of haplotypes revealed that type 1 was the basal haplotype. Genetic distance (D) values were found to be low (0.0-0.0112) within Turkish honey bee populations. The average haplotype diversity (h) within populations was 0.082. Molecular phylogenetic analysis revealed that Konya/Sizma, Antalya/Elmali and Konya/Sel?uklu populations were the most distant from all the other Turkish honey bee populations surveyed.