HFHaoren Feng

Haoren Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haoren Feng has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Scotch-yoke-based piezoelectric wind energy harvester for self-powered sensor nodes in aerostats

    by Xiaoqiang Wei, Haoren Feng, Liang Wang, Kaitian Ge, Biao Liu

    Distributed low-power sensor nodes in aerostat compartments require lightweight, low-maintenance, and self-powered energy solutions. Localized airflow provides a potential energy source, making piezoelectric wind energy harvesting an attractive approach for powering these nodes. For directly airflow-excited piezoelectric harvesters, variations in wind speed can directly alter the aerodynamic loading and consequently the vibration amplitude of the piezoelectric transducer, leading to fluctuations in electrical output and energy-harvesting performance. This study proposes a Scotch-yoke-based piezoelectric wind energy harvester for self-powered sensor nodes in aerostats. The novelty lies in combining a Scotch-yoke-based rotary-to-reciprocating transmission with a corrected first-natural-frequency prediction model to enable deliberate frequency matching between the wind-driven excitation and the piezoelectric beam. The airflow is first captured by a small fan, and the resulting rotation is converted into periodic linear reciprocating excitation by the Scotch-yoke mechanism, with the reciprocating stroke determined by the mechanism geometry and the excitation frequency governed by the fan rotational speed. Nine orthogonal-parameter prototypes are fabricated to investigate the effects of lead zirconate titanate (PZT) dimensions and tip mass on resonant frequency and output performance. Range analysis indicates that the tip mass is the dominant factor affecting the first natural frequency, with a relative influence of 66.8%. At a target wind speed of 10 m s −1 , the calibrated excitation frequency of 46.3 Hz is used for frequency-matching optimization. The optimized prototype achieves a first resonant frequency of 46.19 Hz, corresponding to a relative deviation of 0.24%, and delivers a maximum output power of 6.7 mW under the optimal load. Capacitor-charging and self-powered temperature-sensing experiments further demonstrate its capability to support intermittent sensing and wireless data transmission. The proposed harvester provides a compact and frequency-designable solution for self-powered sensing in aerostat compartments.

  • Open Access

    High-hydrostatic-pressure dynamic modeling method of piezoelectric transducer

    by Xinrong Chen, Wen Gu, Guang Yang, Liang Wang, Zeyuan You, Siyu Zhou, Haoren Feng, Jiamei Jin

    Piezoelectric transducers, as a novel resonant actuator, have been employed as driving system of compact unmanned vehicles operating in deep-sea environments, due to the fact that they require neither pressure-resistant housing nor dynamic seals, enabling lightweight and space-efficient configurations. However, yet dynamic modeling and high-frequency microvibration analysis of piezoelectric transducers under high hydrostatic pressure have not yet been systematically reported. Existing simulation models are limited by shortcomings such as high computational complexity or the inability to apply fluid loading and pressure to precise geometries. Therefore, this study proposed a general dynamics modeling method for the structural, acoustic and flow fields of resonant microvibration structures under high-hydrostatic-pressure environment, with a piezoelectric transducer as case study. First, the proposed modeling method derives harmonic-response equations incorporating prestress and electromechanical coupling for hydrostatic-pressure environments, without requiring explicit meshing of the fluid domain. Then, a solution modeling on a piezoelectric transducer is developed by combining model reduction with interpolation-based reuse of fluid-reaction operators, enabling the prediction of pressure-dependent microvibration behavior with low computational complexity. Finally, the proposed modeling method was experimentally validated using the piezoelectric transducer prototype in the case study. The predicted resonant frequencies agreed closely with the experimental results, with relative errors below 1.5% under wetted conditions and 1.3% over hydrostatic pressures from 0 to 110 MPa. The proposed method clarifies how material constitutive behavior and medium properties govern resonance-frequency drift and amplitude variation under high hydrostatic pressure, thereby providing theoretical support for the analysis of other high-frequency microvibration structures.

  • Open Access

    Coupled-vibration dynamics of piezoelectric actuators in release mechanisms

    by Zhiqin Zeng, Meng Li, Shiyu Zhang, Haoren Feng, Pantao Yang, Liang Wang, Jiamei Jin

    Conventional electromagnetic and hydraulic release mechanisms involve inherent trade-offs among sealing efficiency, fatigue life, response time, and system complexity. These limitations intensify with water depth. To address this, a single-mode piezoelectric-driven release mechanism (PDRM) is proposed. Its core unit is a contact-coupled piezoelectric actuator (CCPA) excited by a single-phase signal, in which the longitudinal and transverse vibration modes are naturally coupled to generate an elliptical trajectory under eccentric reaction forces. To guide the design of the CCPA, a dynamic model incorporating the clamping structure is developed. This model characterizes vibration behavior under free and clamped boundary conditions and analyzes the influence of structural asymmetry. Key dimensional parameters are optimized using this model, and experiments confirm its high accuracy in predicting frequency and amplitude. Underwater tests on the CCPA prototype demonstrate a maximum driving speed of 0.72 m/s, a thrust of 14 N, and start/stop times of 18 ms and 11 ms. The prototype operates normally at 114 MPa, with a driving speed of 0.44 m/s. The PDRM prototype achieves a release load of 55 kg, with the CCPA speed reaching 0.15 m/s. Environmental tests, including 24-hour dwell at 110 MPa, salt spray, and direct load release, confirm deep-sea reliability. This study presents a piezoelectric actuation concept for release mechanisms that functions under static high hydrostatic pressure, offering a potential alternative to conventional designs.

  • Open Access

    Phase-Synchronized Split-Type Linear Piezoelectric Actuator

    by Meng Li, Zhiqin Zeng, Liang Wang, Haoren Feng, Xu Lou, Wen Gu, Jiamei Jin

    Friction-driven linear piezoelectric actuators excel in positioning resolution and response speed, yet their speed-thrust-bandwidth performance remains constrained by strongly coupled contact dynamics. This work proposes a split-kinematic linear piezoelectric actuator in which the stator and mover are mechanically separated and independently excited. The architecture introduces the inter-channel phase difference as an additional control variable for synchronizing the normal contact force with the relative tangential velocity. To predict the resulting long-stroke motion, an electromechanical–contact coupled dynamic framework is developed. The framework integrates a simplified transfer-matrix formulation for the distributed vibration field, a Greenwood–Williamson rough-contact model, a regularized friction law, and rigid-body slider dynamics. A dynamic spatial mapping scheme is further introduced to evaluate the local mover vibration velocity at the instantaneous contact coordinate, replacing the conventional uniform-velocity assumption. Experimental vibration measurements show a 39.9% spatial variation of velocity amplitude over the 12 mm stroke, confirming the need for position-dependent mapping. The proposed model predicts transient slider motion with normalized root-mean-square errors below 7% across the tested contact angles and improves prediction accuracy over a spatially averaged baseline under non-uniform vibration conditions. Sensitivity analysis shows that phase difference is the dominant parameter for thrust, whereas speed is governed mainly by the coupled effect of contact angle and phase. The prototype achieves a maximum speed of 580 mm/s, a maximum thrust of 9.6 N, an effective operating bandwidth of 10.5 kHz, and a peak efficiency of 26.0%. The results demonstrate that spatially resolved modeling and phase-synchronized split excitation provide a practical route for improving the controllability and broadband performance of friction-driven linear piezoelectric actuators.

  • Open Access

    A Modal Synergistic Actuation Multi-Degree-of-Freedom Rotary Piezoelectric Actuator Based on Mode-Shapes Spatial Position Control

    by Shiyu Zhang, Haoren Feng, Liang Wang, Zhiqin Zeng, Meng Li, Jiamei Jin

    Conventional multi-degree-of-freedom (multi-DOF) piezoelectric actuators realize 3D motion by coordinating several orthogonal physical axes (e.g., X/Y/Z). This reliance substantially inflates hardware and control complexity, thereby constraining the ability of such systems to meet the multidimensional motion demands of precision applications in aerospace, medical devices, and micro-robotics. Therefore, we propose a modal-synergistic and mode-shape spatial position control driving strategy for the stators. By coordinating two distinct vibration modes within two stators, a virtual rotation axis of the spherical rotor is created. Through spatial position control method of the two mode shapes, the driving feet acquire programmable trajectories that reposition the virtual axes in space, thereby enabling controllable multi-directional rotation of the rotor. Building on this concept, the paper first details the configuration of the multi-DOF rotary piezoelectric actuator, the selection and pairing principles of the stator vibration modes, and the rotation mechanism of the rotor under modal synergy. Next, finite-element analyses verify the principle of mode-shape spatial position control, and parameter optimization determines geometric dimensions that make the target vibration modes of the two stators co-resonant. Finally, a proof-of-concept prototype is fabricated and assembled, followed by multi-directional motion verification and performance characterization. The prototype rotates about eight virtual axes and achieves stable rotation in all intended directions, confirming the feasibility and effectiveness of the scheme. Theoretical and experimental results show that the proposed modal-synergy and mode-shape spatial position control method simplifies the actuator structure and drive control and offers a practical route to expanding the motion dimensionality of rotary piezoelectric actuators.

  • Design and application of a ring-shaped acoustic focusing piezoelectric transducer for emulsion separation

    by Wei Chen, Haoren Feng, Liang Wang, Yitao Wang, Xiaoqiang Wei

  • A Novel 2-DOF Frame-Type Rotary Piezoelectric Actuator: Design, Dynamic Modeling, and Experimental Evaluation

    by Zhiyong Pan, Liang Wang, Jiamei Jin, Haoren Feng, Chunsheng Zhao

    Traditional multi-degree-of-freedom actuators suffer from low manipulation accuracy, poor electromagnetic compatibility, and considerable system complexity, due to their structure, operating principle, and transmission limitations. To address these issues, a novel two-degree-of-freedom rotary piezoelectric actuator with a frame stator is proposed, which utilizes the principle of modal coupling to form an elliptical trajectory for actuation. The key dimensions of the frame stator are optimized to enhance the output performance by creating its dynamic model. The experimental results indicate that the actuator prototype achieves a start/stop response time of less than 20 ms in both x- and y-axis directions, with angular displacement resolutions of 7.2 μrad and 7.4 μrad, respectively, highlighting its rapid response and high positioning accuracy. Ultimately, the feasibility of the potential application of the prototype is verified through load experiments, which provides a new approach for advancing optical pointing mechanisms.