XWXiaoyu Wang

Xiaoyu Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoyu Wang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characterization of Joule heating and deconsolidation behavior of continuous carbon fiber reinforced polyamide 6 composites under self‐resistance electric heating

    by Yunhuan Liu, Huaping Tang, Xiaoyu Wang, Zhanyu Zhai

    As an effective heating method, self‐resistance electric (SRE) heating was applied for welding, hot stamping and curing process of composites. In this study, the characterization of Joule heating and deconsolidation behavior of continuous carbon fiber reinforced polyamide 6 (CFR‐PA6) laminate under SRE heating were investigated. A series of experiments were performed to build the relationship among geometry sizes, current density and temperature response. Then the relationship between the temperature rising rate and current density of CFR‐PA6 laminate with twill weave fabric was determined. The temperature evolution of specimen with a hole under SRE heating was also discussed. Furthermore, the deconsolidation behavior of CFR‐PA6 specimens under SRE heating as well as oven heating was characterized through macroscopic and mesoscopic properties. The interlaminar shear strength (ILSS) tests of specimens were also conducted. The results indicate that the temperature response of CFR‐PA6 laminate is mainly determined by the current density and their relationship can be described by a quadratic function. It is found that voids appear both inside the fiber bundles and resin‐rich areas owing to the thermal mismatch between the resin and carbon fibers after SRE heating, while no voids inside the fiber bundles were observed after oven heating. The deconsolidation behavior of laminate after SRE heating reduces the ILSS.


  • Fabrication of continuous carbon fiber reinforced polyamide 6 composites by means of self‐resistance electric heating

    by Xiaoyu Wang, Yunhuan Liu, Qingzhu He, Can Weng, Zhanyu Zhai

    In the conventional process of thermoplastic composites, a heating stage from the external heat source usually consumes a large amount of energy. To solve this problem, self‐resistance electric (SRE) heating of carbon fiber‐reinforcement was introduced to form a continuous carbon fiber reinforced polyamide 6 (CF/PA 6) composite based on film stacking technique in this paper. The temperature distribution was first measured to verify the temperature uniformity for SRE heating process. X‐ray photoelectron spectroscopy (XPS) was used to assess effects on the chemical properties of carbon fibers from SRE heating and conventional convective heating. To evaluate forming quality by SRE heating, the physical properties, crystallinity, and mechanical properties of CF/PA 6 composites were measured. The results show that the forming time and energy consumption of SRE heating process are significantly reduced compared with that of the traditional heating process because of fast heating/cooling rate. While fast heating/cooling rate of SRE heating process leads to a higher void content, which finally results in a slightly lower flexural strength and impact properties of composite laminates. It is clear that SRE heating technique is one of the energy‐ and cost‐effective ways to fabricate continuous carbon fiber reinforced thermoplastic composites although the forming quality is still improved in future investigation.