Qunyou Zhong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qunyou Zhong has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Dawei An
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
2 shared publications - Weiqing Huang
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
2 shared publications - Chenglong Yang
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
1 shared publication - Jialun Wu
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
1 shared publication - Kaijie Huang
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
1 shared publication - Yi Zhang
School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China
1 shared publication
Latest Publications
- Open Access
- 30 March 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (4) , 408
Design of Piezoelectric Ultrasonic Composite Vibration System for Precision Grinding
Due to the high hardness and brittleness of sapphire, traditional machining methods are prone to surface scratches and microcracks. As an advanced processing technique, ultrasonic machining can reduce damage to hard–brittle materials and improve surface quality. In this study, an integrated ultrasonic longitudinal–torsional vibration system consisting of both a horn and a tool was designed. The resonant frequency and output amplitude of the horn were simulated and tested. The results indicated that the resonant frequency was 19.857 kHz, the longitudinal amplitude at the tool end was 4.2 µm, and the torsional amplitude was 1.8 µm. Experiments were then carried out to investigate the effects of various machining parameters on the reduction of sapphire surface roughness (Ra) and material removal rate (MRR). A comparative experiment was then conducted to evaluate the effects of ultrasonic longitudinal and longitudinal–torsional vibration on sapphire grinding. The ultrasonic longitudinal–torsional grinding experiments showed that the surface roughness of the sapphire workpiece was reduced from 960.6 nm to 82.6 nm, and the surface flatness was improved to 84.3 nm. Compared with longitudinal ultrasonic vibration, longitudinal torsional grinding reduced the surface roughness of sapphire workpieces by 48% and increased the surface flatness by 88.3%. The results of this study provide specific guidance for the longitudinal–torsional composite ultrasonic machining of hard–brittle materials.
- 30 March 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (4) , 408
Open AccessDesign of Piezoelectric Ultrasonic Composite Vibration System for Precision Grinding
Due to the high hardness and brittleness of sapphire, traditional machining methods are prone to surface scratches and microcracks. As an advanced processing technique, ultrasonic machining can reduce damage to hard–brittle materials and improve surface quality. In this study, an integrated ultrasonic longitudinal–torsional vibration system consisting of both a horn and a tool was designed. The resonant frequency and output amplitude of the horn were simulated and tested. The results indicated that the resonant frequency was 19.857 kHz, the longitudinal amplitude at the tool end was 4.2 µm, and the torsional amplitude was 1.8 µm. Experiments were then carried out to investigate the effects of various machining parameters on the reduction of sapphire surface roughness (Ra) and material removal rate (MRR). A comparative experiment was then conducted to evaluate the effects of ultrasonic longitudinal and longitudinal–torsional vibration on sapphire grinding. The ultrasonic longitudinal–torsional grinding experiments showed that the surface roughness of the sapphire workpiece was reduced from 960.6 nm to 82.6 nm, and the surface flatness was improved to 84.3 nm. Compared with longitudinal ultrasonic vibration, longitudinal torsional grinding reduced the surface roughness of sapphire workpieces by 48% and increased the surface flatness by 88.3%. The results of this study provide specific guidance for the longitudinal–torsional composite ultrasonic machining of hard–brittle materials.
- Open Access
Mechanism and Experiment Study of Non-Contact Ultrasonic Assisted Grinding
Ultrasonic-assisted grinding processing can effectively reduce the surface roughness and enhance the processing efficiency in the processing of hard and brittle materials. However, the most common ultrasonic assisted grinding is a type of contact ultrasonic grinding where the grinding tool directly contacts the workpiece, which means that it is necessary to accurately control the pre-pressure of the grinding tool on the workpiece. The control of pre-pressure will inevitably increase the complexity of the grinding device, and it is easy to wear the workpiece because of improper pre-pressure control. In this paper, a non-contact ultrasonic grinding method is proposed and the machining mechanism of non-contact ultrasonic grinding is revealed. The resonant frequency of the ultrasonic vibration system and vibration amplitude of the grinding tool working face were simulated and experimentally tested, respectively. Then, the experiment of non-contact ultrasonic grinding of a sapphire wafer was carried out. The result showed that non-contact ultrasonic grinding of the sapphire wafer could reduce the surface roughness by 48.6%. Compared with traditional contact grinding of sapphire wafer under certain pre-pressure conditions, the experimental results show that non-contact ultrasonic grinding has better effects in reducing surface roughness, improving processing efficiency, and improving the quality uniformity of the workpiece machining surface.
Open AccessMechanism and Experiment Study of Non-Contact Ultrasonic Assisted Grinding
Ultrasonic-assisted grinding processing can effectively reduce the surface roughness and enhance the processing efficiency in the processing of hard and brittle materials. However, the most common ultrasonic assisted grinding is a type of contact ultrasonic grinding where the grinding tool directly contacts the workpiece, which means that it is necessary to accurately control the pre-pressure of the grinding tool on the workpiece. The control of pre-pressure will inevitably increase the complexity of the grinding device, and it is easy to wear the workpiece because of improper pre-pressure control. In this paper, a non-contact ultrasonic grinding method is proposed and the machining mechanism of non-contact ultrasonic grinding is revealed. The resonant frequency of the ultrasonic vibration system and vibration amplitude of the grinding tool working face were simulated and experimentally tested, respectively. Then, the experiment of non-contact ultrasonic grinding of a sapphire wafer was carried out. The result showed that non-contact ultrasonic grinding of the sapphire wafer could reduce the surface roughness by 48.6%. Compared with traditional contact grinding of sapphire wafer under certain pre-pressure conditions, the experimental results show that non-contact ultrasonic grinding has better effects in reducing surface roughness, improving processing efficiency, and improving the quality uniformity of the workpiece machining surface.