Harald S. Müller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Harald S. Müller has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Raphael Breiner
Karlsruher Institut für Technologie (KIT), Institut für Massivbau und Baustofftechnologie (IMB), Abteilung Baustoffe und Betonbau, Gotthard-Franz-Straße 3, 76131 Karlsruhe
2 shared publications - Andreas Wiedmann
Karlsruher Institut für Technologie (KIT), Institut für Massivbau und Baustofftechnologie (IMB), Abteilung Baustoffe und Betonbau, Gotthard-Franz-Straße 3, 76131 Karlsruhe
1 shared publication - Engin Kotan
Karlsruher Institut für Technologie Institut für Massivbau und Baustofftechnologie Abteilung Baustoffe und Betonbau Gotthard‐Franz‐Str. 3 (Geb. 50.31) 76131 Karlsruhe
1 shared publication - Frank Weise
Federal Institute for Materials Research and Testing
1 shared publication Isabel Anders
Karlsruhe Institute of Technology
1 shared publicationJack S. Moffatt
Karlsruher Institut für Technologie (KIT), Institut für Massivbau und Baustofftechnologie (IMB), Abteilung Baustoffe und Betonbau, Gotthard-Franz-Straße 3, 76131 Karlsruhe
1 shared publication
Latest Publications
- 8 January 2015
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 110 (1) , 22-33
Auswirkungen von Ermüdungsbeanspruchungen auf Struktur und Eigenschaften von Fahrbahndeckenbeton
Ausgehend von der Zielsetzung der DFG‐Forschergruppe 1498, die Einflüsse auf den AKR‐Schädigungsprozess in Fahrbahndecken aus Beton grundlegend zu klären, sind zwei aufeinander aufbauende Untersuchungsschwerpunkte Gegenstand dieses Beitrags. Im ersten Schwerpunkt wurden die prüftechnischen Voraussetzungen für die Charakterisierung der Degradation und damit der Rissbildung im Fahrbahndeckenbeton durch die Vorschädigung infolge von Ermüdungsbeanspruchungen geschaffen. Realisiert wurde dies durch die Implementierung und Optimierung eines Monitoringsystems im zyklischen 4‐Punkt‐Biegeversuch zur simultanen Erfassung der Rissbildung im großformatigen Schwingbalken. Zusätzlich wurde die Röntgen‐3D‐Computertomografie für die hochauflösende räumliche quantitative Rissanalyse in den Bohrkernen aus den Schwingbalken ohne und mit Vorschädigung weiterentwickelt. Im zweiten Untersuchungsschwerpunkt wurde mittels vielfältiger Experimente an kleinformatigen Probekörpern aus dem Schwingbalken gezeigt, dass durch die Ermüdungsbeanspruchung die bruchmechanischen Materialkennwerte des Betons zum Teil eine signifikante Veränderung erfahren.Effects of fatigue loading on structure and properties of pavement concreteBased on the objective of the DFG (German research foundation) funded research group 1498 to clarify the influences on the ASR damage process, this paper deals with two focuses of investigation. In the first focus the technical requirements for the characterisation concerning the degradation and the formation of cracks in concrete pavements by the pre‐damage as a result of fatigue loading were created. This was realized by the implementation and the optimisation of a monitoring system in the cyclic four point bending test to capture simultaneously the formation of cracks in the beam under sinusoidal bending load. In addition, the X‐ray 3D‐computed tomography was enhanced for the high‐resolution quantitative spatial crack analysis in the drilling cores extracted of the beam under sinusoidal bending load without and with a pre‐damage. Building on the first focus, in the second focus of investigation a significant change of the fracture‐mechanical properties of the concrete as a result of fatigue loading has been demonstrated in numerous experiments using small specimens extracted from the beam under sinusoidal bending load.
- 8 January 2015
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 110 (1) , 22-33
Auswirkungen von Ermüdungsbeanspruchungen auf Struktur und Eigenschaften von Fahrbahndeckenbeton
Ausgehend von der Zielsetzung der DFG‐Forschergruppe 1498, die Einflüsse auf den AKR‐Schädigungsprozess in Fahrbahndecken aus Beton grundlegend zu klären, sind zwei aufeinander aufbauende Untersuchungsschwerpunkte Gegenstand dieses Beitrags. Im ersten Schwerpunkt wurden die prüftechnischen Voraussetzungen für die Charakterisierung der Degradation und damit der Rissbildung im Fahrbahndeckenbeton durch die Vorschädigung infolge von Ermüdungsbeanspruchungen geschaffen. Realisiert wurde dies durch die Implementierung und Optimierung eines Monitoringsystems im zyklischen 4‐Punkt‐Biegeversuch zur simultanen Erfassung der Rissbildung im großformatigen Schwingbalken. Zusätzlich wurde die Röntgen‐3D‐Computertomografie für die hochauflösende räumliche quantitative Rissanalyse in den Bohrkernen aus den Schwingbalken ohne und mit Vorschädigung weiterentwickelt. Im zweiten Untersuchungsschwerpunkt wurde mittels vielfältiger Experimente an kleinformatigen Probekörpern aus dem Schwingbalken gezeigt, dass durch die Ermüdungsbeanspruchung die bruchmechanischen Materialkennwerte des Betons zum Teil eine signifikante Veränderung erfahren.Effects of fatigue loading on structure and properties of pavement concreteBased on the objective of the DFG (German research foundation) funded research group 1498 to clarify the influences on the ASR damage process, this paper deals with two focuses of investigation. In the first focus the technical requirements for the characterisation concerning the degradation and the formation of cracks in concrete pavements by the pre‐damage as a result of fatigue loading were created. This was realized by the implementation and the optimisation of a monitoring system in the cyclic four point bending test to capture simultaneously the formation of cracks in the beam under sinusoidal bending load. In addition, the X‐ray 3D‐computed tomography was enhanced for the high‐resolution quantitative spatial crack analysis in the drilling cores extracted of the beam under sinusoidal bending load without and with a pre‐damage. Building on the first focus, in the second focus of investigation a significant change of the fracture‐mechanical properties of the concrete as a result of fatigue loading has been demonstrated in numerous experiments using small specimens extracted from the beam under sinusoidal bending load.
- 3 March 2014
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 109 (3) , 202-215
Entwicklungsprinzipien und technische Grenzen der Herstellung zementarmer Betone
- 3 March 2014
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 109 (3) , 202-215
Entwicklungsprinzipien und technische Grenzen der Herstellung zementarmer Betone
- 18 February 2013
- Published by Wiley in Structural Concrete
- Vol. 14 (4) , 320-334
Concrete: treatment of types and properties in fib Model Code 2010
Section 5.1 “Concrete” of the fib Model Code for Concrete Structures 2010 contains basic definitions and well‐established constitutive relations for structural concrete. However, it also presents various new approaches and updated models compared with the earlier CEB‐FIP Model Code 1990. This is particularly true for the strength, stress and strain characteristics of structural concrete, for creep and shrinkage and for sophisticated durability‐related processes. The validity of the models has been extended to several types of concrete such as high strength concrete, self‐compacting concrete and lightweight aggregate concrete. The durability‐related models are either suitable for facilitating a full probabilistic service life design or for applying simpler code‐type approaches.This article provides a concise and selective overview of some of those models. Background information is summarized and there is a focus on improvements achieved by the updated models. In addition, some simple design aids are given to allow pre‐design, for example
- 18 February 2013
- Published by Wiley in Structural Concrete
- Vol. 14 (4) , 320-334
Concrete: treatment of types and properties in fib Model Code 2010
Section 5.1 “Concrete” of the fib Model Code for Concrete Structures 2010 contains basic definitions and well‐established constitutive relations for structural concrete. However, it also presents various new approaches and updated models compared with the earlier CEB‐FIP Model Code 1990. This is particularly true for the strength, stress and strain characteristics of structural concrete, for creep and shrinkage and for sophisticated durability‐related processes. The validity of the models has been extended to several types of concrete such as high strength concrete, self‐compacting concrete and lightweight aggregate concrete. The durability‐related models are either suitable for facilitating a full probabilistic service life design or for applying simpler code‐type approaches.This article provides a concise and selective overview of some of those models. Background information is summarized and there is a focus on improvements achieved by the updated models. In addition, some simple design aids are given to allow pre‐design, for example