Abubakar Muhammad Sadiq
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abubakar Muhammad Sadiq has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Kaixue Ma
Tianjin University
3 shared publications - Yu Luo
Tianjin University
3 shared publications - Adamu Halilu Jabire
Electrical and Electronics Department, Taraba State University, Jalingo-Nigeria
2 shared publications - Eric Newton Moro
Tianjin University
2 shared publications - Ningning Yan
Tianjin University
2 shared publications - Sani Saminu
Department of Biomedical Engineering, University of Ilorin, Ilorin, Nigeria
2 shared publications
Latest Publications
- Open Access
- 4 January 2025
- Published by Universitas Ahmad Dahlan in Buletin Ilmiah Sarjana Teknik Elektro
- Vol. 7 (1) , 42-55
Dielectric Characterization of Breast Cancer Cells using Split-Rectangular Ring Resonator Sensor
Exploring a universal method to enhance the performance of metamaterials by quantifying the impact of gap capacitance is an intriguing topic for many researchers. However, achieving this through conventional methods is extremely challenging. In this paper, we present a microwave sensor designed to characterize cancerous cells based on their electrical properties. The proposed design features a split rectangular ring resonator placed on a flame-retardant four (FR-4) substrate. The sensor aims to achieve high sensitivity and quality factors through the unique characteristics of the metamaterial structure in the GHz frequency range. Through simulations and experimental measurements, we demonstrate the sensor's effective capabilities in detecting cancer. The high sensitivity for both simulation and measurement, is estimated at 10 %. The simulations and validation confirm that this biosensor exhibits significant frequency shifts and high sensitivity. Our proposed configurations highlight the microwave sensor's potential for detecting six different breast cancer cell types: HSS-2, HS578-T_nm, MCF-2, MCF-10A_nm, T-47D, and T-47D_nm. Based on the existing literatures, the sensitivity of the proposed sensor is determined to be greater.
- 4 January 2025
- Published by Universitas Ahmad Dahlan in Buletin Ilmiah Sarjana Teknik Elektro
- Vol. 7 (1) , 42-55
Open AccessDielectric Characterization of Breast Cancer Cells using Split-Rectangular Ring Resonator Sensor
Exploring a universal method to enhance the performance of metamaterials by quantifying the impact of gap capacitance is an intriguing topic for many researchers. However, achieving this through conventional methods is extremely challenging. In this paper, we present a microwave sensor designed to characterize cancerous cells based on their electrical properties. The proposed design features a split rectangular ring resonator placed on a flame-retardant four (FR-4) substrate. The sensor aims to achieve high sensitivity and quality factors through the unique characteristics of the metamaterial structure in the GHz frequency range. Through simulations and experimental measurements, we demonstrate the sensor's effective capabilities in detecting cancer. The high sensitivity for both simulation and measurement, is estimated at 10 %. The simulations and validation confirm that this biosensor exhibits significant frequency shifts and high sensitivity. Our proposed configurations highlight the microwave sensor's potential for detecting six different breast cancer cell types: HSS-2, HS578-T_nm, MCF-2, MCF-10A_nm, T-47D, and T-47D_nm. Based on the existing literatures, the sensitivity of the proposed sensor is determined to be greater.
- Open Access
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (6) , 1773-1785
Single-Motor Controlled Mechanically Frequency Reconfigurable Unidirectional Antenna Array With Stable Radiation Patterns
This article presents a mechanically frequency-reconfigurable monopole antenna and array that offers a wide tuning range, gain enhancement, and stable beamwidth. The monopole is positioned above a large reflector plate to achieve unidirectional radiation and increased gain. By adjusting the height between the monopole and reflector plate at k/4 according to resonant frequencies, the frequency band and gain stability can be achieved. A single-motor controlled mechanical system enables the reconfiguration of resonant frequencies and gain enhancement. Measured results demonstrate that the frequency can be adjusted from 1.17 to 3.08 GHz (basic mode) with a relative bandwidth of 89% for a single monopole over the reflector. In the tuning frequency band, the gain and radiation efficiency are 7.51±0.88 dBi and 91.9±6%, respectively. To further enhance and stabilize the gain, a method is proposed and implemented in the array application. An advanced single-motor controlled mechanical system is designed to simultaneously adjust the resonant frequencies, height between the monopole and reflector plate, and inter-distance between the elements. Measured results show that the frequency can be adjusted from 1.15 to 3.0 GHz with a relative bandwidth of 86%. The achieved gain is 11.81±0.38 dBi, and the radiation efficiency is 89.9±8.2% at the basic mode. Additionally, the 3 dB beamwidth in the reconfigured band is 61.5°±6.5° and 39.5°±5.5° for E-planes and H-planes, respectively, indicating stable radiation patterns.
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (6) , 1773-1785
Open AccessSingle-Motor Controlled Mechanically Frequency Reconfigurable Unidirectional Antenna Array With Stable Radiation Patterns
This article presents a mechanically frequency-reconfigurable monopole antenna and array that offers a wide tuning range, gain enhancement, and stable beamwidth. The monopole is positioned above a large reflector plate to achieve unidirectional radiation and increased gain. By adjusting the height between the monopole and reflector plate at k/4 according to resonant frequencies, the frequency band and gain stability can be achieved. A single-motor controlled mechanical system enables the reconfiguration of resonant frequencies and gain enhancement. Measured results demonstrate that the frequency can be adjusted from 1.17 to 3.08 GHz (basic mode) with a relative bandwidth of 89% for a single monopole over the reflector. In the tuning frequency band, the gain and radiation efficiency are 7.51±0.88 dBi and 91.9±6%, respectively. To further enhance and stabilize the gain, a method is proposed and implemented in the array application. An advanced single-motor controlled mechanical system is designed to simultaneously adjust the resonant frequencies, height between the monopole and reflector plate, and inter-distance between the elements. Measured results show that the frequency can be adjusted from 1.15 to 3.0 GHz with a relative bandwidth of 86%. The achieved gain is 11.81±0.38 dBi, and the radiation efficiency is 89.9±8.2% at the basic mode. Additionally, the 3 dB beamwidth in the reconfigured band is 61.5°±6.5° and 39.5°±5.5° for E-planes and H-planes, respectively, indicating stable radiation patterns.
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (11) , 3882-3886
High Isolation Dual-Polarized SISL Antenna With Out-of-Band Rejection Improvement Using Artificial Magnetic Conductor
This paper proposes a dual-polarized differential-fed substrate integrated suspended line (SISL) patch antenna with out-of-band rejection level using an artificial magnetic conductor structure. By etching vertical and horizontal symmetrical slots A on an electromagnetically-coupled square patch antenna with vias connecting patch and feeding line to help the slots maintain good filtering selectivity, an additional resonance (f r2 ) is excited with lower radiation null (f n1 ) and the cancellation of the horizontal current on the radiating patch (RP) generated upper radiation null (f n2 ). On the other hand, a stacked patch (SP) provides upper radiation nulls f n3 , and a 4 × 4 artificial magnetic conductor (AMC) structure further enhances the antenna's rejection level at the upper band edge. The simulated and measured results show that an impedance bandwidth (IBW) of 21.9% (2.93–3.65 GHz) is achieved with a compact size of 0.55λ0 × 0.55λ 0 × 0.06λ 0 (λ 0 is the free-space wavelength at the center frequency). An out-of-band rejection level higher than 17.2 dB and 28.2 dB is obtained at lower and upper bands, respectively, with a maximum gain of approximately 8.2 dBi, and stable radiation patterns are realized within the passband.
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (11) , 3882-3886
High Isolation Dual-Polarized SISL Antenna With Out-of-Band Rejection Improvement Using Artificial Magnetic Conductor
This paper proposes a dual-polarized differential-fed substrate integrated suspended line (SISL) patch antenna with out-of-band rejection level using an artificial magnetic conductor structure. By etching vertical and horizontal symmetrical slots A on an electromagnetically-coupled square patch antenna with vias connecting patch and feeding line to help the slots maintain good filtering selectivity, an additional resonance (f r2 ) is excited with lower radiation null (f n1 ) and the cancellation of the horizontal current on the radiating patch (RP) generated upper radiation null (f n2 ). On the other hand, a stacked patch (SP) provides upper radiation nulls f n3 , and a 4 × 4 artificial magnetic conductor (AMC) structure further enhances the antenna's rejection level at the upper band edge. The simulated and measured results show that an impedance bandwidth (IBW) of 21.9% (2.93–3.65 GHz) is achieved with a compact size of 0.55λ0 × 0.55λ 0 × 0.06λ 0 (λ 0 is the free-space wavelength at the center frequency). An out-of-band rejection level higher than 17.2 dB and 28.2 dB is obtained at lower and upper bands, respectively, with a maximum gain of approximately 8.2 dBi, and stable radiation patterns are realized within the passband.
- 4 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11410-11421
A Low-Cost SISL Differentially Fed Dual-Polarized Stacked Patch Antenna With Enhanced Common-Mode Suppression Using Characteristic Mode Analysis
A wideband differentially fed dual-polarized stacked patch antenna with high common-mode (CM) suppression is proposed in this article using the characteristic mode analysis (CMA) and the substrate integrated suspended line (SISL) technology. Based on the CMA, orthogonal slots are loaded within the stacked patch to enhance the directivity of the second-order degenerate modes and reallocate the resonating frequency of the fundamental degenerate modes. A crossed dipole is introduced within the driven patch to ensure polarization uniformity between the two paired degeneracies. The common-mode suppression level (S CC 11) is enhanced from -10 to -1.30 dB within the frequency range of 4.0-7.0 GHz by embedding circular slots embedded within the stacked patch and controlling the slot radius. Measured results demonstrate a -10dB differential impedance bandwidth of 28.4% (4.62-6.18 GHz) and high isolation of better than -39.5 dB between the differential ports. The antenna depicts stable measured radiation patterns with low cross-polarization (<-30 dB). The measured average antenna gain and efficiency are 9.55 dBi and 85.5% within the DM passband. In addition, a high S CC 11 better than – 1.05 dB is measured within the desired DM band.
- 4 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11410-11421
A Low-Cost SISL Differentially Fed Dual-Polarized Stacked Patch Antenna With Enhanced Common-Mode Suppression Using Characteristic Mode Analysis
A wideband differentially fed dual-polarized stacked patch antenna with high common-mode (CM) suppression is proposed in this article using the characteristic mode analysis (CMA) and the substrate integrated suspended line (SISL) technology. Based on the CMA, orthogonal slots are loaded within the stacked patch to enhance the directivity of the second-order degenerate modes and reallocate the resonating frequency of the fundamental degenerate modes. A crossed dipole is introduced within the driven patch to ensure polarization uniformity between the two paired degeneracies. The common-mode suppression level (S CC 11) is enhanced from -10 to -1.30 dB within the frequency range of 4.0-7.0 GHz by embedding circular slots embedded within the stacked patch and controlling the slot radius. Measured results demonstrate a -10dB differential impedance bandwidth of 28.4% (4.62-6.18 GHz) and high isolation of better than -39.5 dB between the differential ports. The antenna depicts stable measured radiation patterns with low cross-polarization (<-30 dB). The measured average antenna gain and efficiency are 9.55 dBi and 85.5% within the DM passband. In addition, a high S CC 11 better than – 1.05 dB is measured within the desired DM band.
- Open Access
- 1 June 2021
- Published by Riga Technical University in Electrical, Control and Communication Engineering
- Vol. 17 (1) , 12-18
Reduction of Mutual Coupling in UWB/MIMO Antenna Using Stub Loading Technique
The research presents mutual coupling reduction between UWB-MIMO antenna elements using stub loading technique. The proposed 2 × 2 UWB antenna geometry consists of two circular-shaped monopole radiators with a partial ground for perfect impedance matching. Stubs of 20 mm × 0.2 mm are inserted between the two antenna elements in the ground plane to improve the isolation. The decoupling stub leads to a mutual coupling reduction of less than 20 dB. The farfield measurement at a selected frequency of 10 GHz confirms an omnidirectional radiation pattern. Different MIMO antenna metric such as channel capacity loss (CCL), mean effective gain (MEG), total active reflection coefficient (TARC), envelope correlation coefficient (ECC), and surface current are presented. Details of the design considerations and the simulation and measurement results are presented and discussed. The proposed MIMO antenna array can be well suited for UWB applications.
- 1 June 2021
- Published by Riga Technical University in Electrical, Control and Communication Engineering
- Vol. 17 (1) , 12-18
Open AccessReduction of Mutual Coupling in UWB/MIMO Antenna Using Stub Loading Technique
The research presents mutual coupling reduction between UWB-MIMO antenna elements using stub loading technique. The proposed 2 × 2 UWB antenna geometry consists of two circular-shaped monopole radiators with a partial ground for perfect impedance matching. Stubs of 20 mm × 0.2 mm are inserted between the two antenna elements in the ground plane to improve the isolation. The decoupling stub leads to a mutual coupling reduction of less than 20 dB. The farfield measurement at a selected frequency of 10 GHz confirms an omnidirectional radiation pattern. Different MIMO antenna metric such as channel capacity loss (CCL), mean effective gain (MEG), total active reflection coefficient (TARC), envelope correlation coefficient (ECC), and surface current are presented. Details of the design considerations and the simulation and measurement results are presented and discussed. The proposed MIMO antenna array can be well suited for UWB applications.