Sejeung Choi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sejeung Choi has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Sangbum Kim
Seoul National University
3 shared publications - Deokyoung Kang
Department of Materials Science and Engineering
1 shared publication - Suyeon Jang
Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
1 shared publication
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33, 4436-4440
Symplectic Stability Classes and the Efficacy of Linear Canonical Transform-Based Token Mixers
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Signal Processing Letters
- Vol. 33, 4436-4440
Symplectic Stability Classes and the Efficacy of Linear Canonical Transform-Based Token Mixers
- 14 May 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (23) , 14319-14329
V-PCMixer: incorporating 3D vertical phase-change memory based analog in-memory computing in mixer architecture
A 3D vertical phase-change memory was fabricated and validated for analog in-memory computing. These components were cohesively integrated into a Mixer-based architecture to enable efficient analog-domain processing.
- 14 May 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (23) , 14319-14329
V-PCMixer: incorporating 3D vertical phase-change memory based analog in-memory computing in mixer architecture
A 3D vertical phase-change memory was fabricated and validated for analog in-memory computing. These components were cohesively integrated into a Mixer-based architecture to enable efficient analog-domain processing.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2363-2366
In-Series Phase-Change Memory Pair for Enhanced Data Retention and Large Window in Automotive Application
Non-volatile memory (NVM) constitutes a vital component within automotive embedded systems and must comply with specific reliability standards. However, very few NVMs meet the stringent grade 0 criteria outlined by AEC-Q100, which necessitates operation up to 150°C. While phase-change memory (PCM) demonstrates relative resilience to high temperatures, its inherent trade-off between retention and on/off ratio remains unavoidable. To overcome this trade-off, we propose connecting two complementary phase-change materials in series to leverage the strengths of each material. One material provides large on/off ratio even right after the RESET programming, while another material provides a long retention time, enabling the 2R-device to secure sufficient margin throughout the long retention period for large temperature range. After the retention-failure of one device with a sizable on/off ratio, the other device, with increasing resistance due to drift, maintains an adequate margin. Experimental demonstrations of 2R-devices, based on GST225 and GaSbGe, exhibit their operation at temperatures of up to 130°C, exhibiting a larger window compared to PCM only with GaSbGe. Furthermore, the 10-year retention temperature of the 2R-device is 153°C, suggesting that 2R-devices have the potential to meet grade 0 requirements.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2363-2366
In-Series Phase-Change Memory Pair for Enhanced Data Retention and Large Window in Automotive Application
Non-volatile memory (NVM) constitutes a vital component within automotive embedded systems and must comply with specific reliability standards. However, very few NVMs meet the stringent grade 0 criteria outlined by AEC-Q100, which necessitates operation up to 150°C. While phase-change memory (PCM) demonstrates relative resilience to high temperatures, its inherent trade-off between retention and on/off ratio remains unavoidable. To overcome this trade-off, we propose connecting two complementary phase-change materials in series to leverage the strengths of each material. One material provides large on/off ratio even right after the RESET programming, while another material provides a long retention time, enabling the 2R-device to secure sufficient margin throughout the long retention period for large temperature range. After the retention-failure of one device with a sizable on/off ratio, the other device, with increasing resistance due to drift, maintains an adequate margin. Experimental demonstrations of 2R-devices, based on GST225 and GaSbGe, exhibit their operation at temperatures of up to 130°C, exhibiting a larger window compared to PCM only with GaSbGe. Furthermore, the 10-year retention temperature of the 2R-device is 153°C, suggesting that 2R-devices have the potential to meet grade 0 requirements.
- 22 October 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 36 (12) , 124001
1/ f noise in amorphous Sb 2 Te 3 for energy-efficient stochastic synapses in neuromorphic computing
Recent studies on neuromorphic computing have used stochastic synapses to implement power-efficient stochastic computing inspired by unreliable connections between neurons, such as the blank-out noise in the Synaptic Sampling Machine. In this paper, we propose to generate stochasticity by exploiting intrinsic 1 / f noise in phase change memory (PCM) as a synaptic device, negating additional stochastic devices and circuits that deteriorate the synaptic footprints and power consumption. As existing models are limited to demonstrating the spectral density of 1 / f noise, we devised a new model based on two-level state theory with a cutoff frequency, resulting in accurate quantification of the finite normalized variance of current ( σ I 2 / I 2 ) of PCM and its dependence on the volume of the cell and the frequency range in which the measurement is taken. We experimentally verified our model by measuring 1 / f noise of a phase change bridge cell with an as-deposited amorphous Sb 2 Te 3 as the phase change material. We further analyzed whether the noise in PCM can implement a restricted Boltzmann machine (RBM), in which stochasticity plays a key role, to allow efficient neuromorphic computing. We devised and simulated a spiking neural network (SNN)-based RBM system based on a 832 × 832 PCM synapse array with the intrinsic noise model. As we modeled the normalized synaptic noise with a normal distribution, N μ = 1 , σ 2 and optimal standard deviation between 0.01 and 0.05, the on-chip learning and inference test result showed comparable MNIST accuracy and ∼60 times larger estimated energy efficiency than that of the SNN-based RBM, the stochasticity of which is implemented with power-consuming random walk neuron circuits, demonstrating that the intrinsic 1 / f noise of PCM is not a nuisance but an asset to implement efficient neuromorphic computing systems.
- 22 October 2021
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 36 (12) , 124001
1/ f noise in amorphous Sb 2 Te 3 for energy-efficient stochastic synapses in neuromorphic computing
Recent studies on neuromorphic computing have used stochastic synapses to implement power-efficient stochastic computing inspired by unreliable connections between neurons, such as the blank-out noise in the Synaptic Sampling Machine. In this paper, we propose to generate stochasticity by exploiting intrinsic 1 / f noise in phase change memory (PCM) as a synaptic device, negating additional stochastic devices and circuits that deteriorate the synaptic footprints and power consumption. As existing models are limited to demonstrating the spectral density of 1 / f noise, we devised a new model based on two-level state theory with a cutoff frequency, resulting in accurate quantification of the finite normalized variance of current ( σ I 2 / I 2 ) of PCM and its dependence on the volume of the cell and the frequency range in which the measurement is taken. We experimentally verified our model by measuring 1 / f noise of a phase change bridge cell with an as-deposited amorphous Sb 2 Te 3 as the phase change material. We further analyzed whether the noise in PCM can implement a restricted Boltzmann machine (RBM), in which stochasticity plays a key role, to allow efficient neuromorphic computing. We devised and simulated a spiking neural network (SNN)-based RBM system based on a 832 × 832 PCM synapse array with the intrinsic noise model. As we modeled the normalized synaptic noise with a normal distribution, N μ = 1 , σ 2 and optimal standard deviation between 0.01 and 0.05, the on-chip learning and inference test result showed comparable MNIST accuracy and ∼60 times larger estimated energy efficiency than that of the SNN-based RBM, the stochasticity of which is implemented with power-consuming random walk neuron circuits, demonstrating that the intrinsic 1 / f noise of PCM is not a nuisance but an asset to implement efficient neuromorphic computing systems.