Stefan Scheuren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stefan Scheuren has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Benedikt Schmitz
European University of Technology, European Union, Germany
3 shared publications Christian Rödel
Faculty of Mechanical Engineering University of Applied Science Schmalkalden Blechhammer 6-9 98574 Schmalkalden Germany
3 shared publications- Marc Zimmer
Institut für Kernphysik, Technische Universität Darmstadt, 64289 Darmstadt, Germany
3 shared publications Markus Roth
Institut für Kernphysik (IKP) Technische Universität Darmstadt Schlossgartenstr. 9 64289 Darmstadt Germany
3 shared publications- Carlos Guerrero
Universidad de Sevilla, 41004 Sevilla, Spain
2 shared publications - Christian Rödel
Technical University of Darmstadt, Institute for Nuclear Physics, Darmstadt, Germany
2 shared publications
Latest Publications
- Open Access
- 1 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Single-event fast neutron time-of-flight spectrometry with a petawatt-laser-driven neutron source
Laser-driven neutron sources (LDNSs) offer unique advantages for fundamental physics and applications: ultrashort pulses providing superior energy resolution, high instantaneous flux, and a reduced footprint. While single-event neutron spectroscopy has been demonstrated with epithermal neutrons, its application for fast neutrons is more challenging and remains unproven. This demands stable multi-shot operation and detectors resilient to this particularly extreme environment. Here, a proof-of-concept experiment at the DRACO PW laser is presented. This setup stably produced ~ 10 8 fast neutrons per shot sustained over more than 200 shots at a shot-per-minute rate. Neutron time-of-flight measurements with a diamond detector at only 150 cm from the source resolved individual neutron-induced reactions at a rate consistent with simulations informed by real-time diagnostics of accompanying gammas, ions, and electrons. Combined with the recent advances in the field, this work establishes LDNSs as a promising, scalable platform for future fast neutron-induced reaction studies, particularly those involving short-lived isotopes.
- 1 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSingle-event fast neutron time-of-flight spectrometry with a petawatt-laser-driven neutron source
Laser-driven neutron sources (LDNSs) offer unique advantages for fundamental physics and applications: ultrashort pulses providing superior energy resolution, high instantaneous flux, and a reduced footprint. While single-event neutron spectroscopy has been demonstrated with epithermal neutrons, its application for fast neutrons is more challenging and remains unproven. This demands stable multi-shot operation and detectors resilient to this particularly extreme environment. Here, a proof-of-concept experiment at the DRACO PW laser is presented. This setup stably produced ~ 10 8 fast neutrons per shot sustained over more than 200 shots at a shot-per-minute rate. Neutron time-of-flight measurements with a diamond detector at only 150 cm from the source resolved individual neutron-induced reactions at a rate consistent with simulations informed by real-time diagnostics of accompanying gammas, ions, and electrons. Combined with the recent advances in the field, this work establishes LDNSs as a promising, scalable platform for future fast neutron-induced reaction studies, particularly those involving short-lived isotopes.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
Recent developments and perspectives on laser-driven neutron sources (LDNSs)
Since their discovery over 90 years ago, neutrons have become one of the premier tools in the study of the structure and dynamics of matter and materials. The main nuclear processes to generate a large number of free neutrons are fusion, fission, and spallation, which have been well established for using neutrons in broad areas of physics, material science, engineering, life sciences, and elsewhere. The vast majority of experiments that use neutrons as a probe require a directional, well-collimated beam of neutrons. Over the years, methods have been developed to deliver such neutron beams sufficiently, but it is still much desired to improve the efficiency of neutron sources. With the advent of high-powered lasers, laser-driven neutron sources suggest an attractive possibility. Laser photons can be converted to neutrons by accelerating particles (electrons, protons, and deuterons) and then either utilize hard x rays from, for example, electron acceleration to create photoneutrons or nuclear reactions, such as deuteron break-up. The maturity of such processes in recent years might have reached a state where such neutron sources are becoming useful and beneficial to the neutron community. In the present report, the current state-of-the-art of a laser-driven neutron source and its future development for neutron applications are presented, and existing sources are described. The basic physical principles of laser-driven neutron production and the current state-of-the-art of production techniques are outlined. The potential developments and the role of such sources in the landscape of neutron sources in the future are critically commented on.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
Recent developments and perspectives on laser-driven neutron sources (LDNSs)
Since their discovery over 90 years ago, neutrons have become one of the premier tools in the study of the structure and dynamics of matter and materials. The main nuclear processes to generate a large number of free neutrons are fusion, fission, and spallation, which have been well established for using neutrons in broad areas of physics, material science, engineering, life sciences, and elsewhere. The vast majority of experiments that use neutrons as a probe require a directional, well-collimated beam of neutrons. Over the years, methods have been developed to deliver such neutron beams sufficiently, but it is still much desired to improve the efficiency of neutron sources. With the advent of high-powered lasers, laser-driven neutron sources suggest an attractive possibility. Laser photons can be converted to neutrons by accelerating particles (electrons, protons, and deuterons) and then either utilize hard x rays from, for example, electron acceleration to create photoneutrons or nuclear reactions, such as deuteron break-up. The maturity of such processes in recent years might have reached a state where such neutron sources are becoming useful and beneficial to the neutron community. In the present report, the current state-of-the-art of a laser-driven neutron source and its future development for neutron applications are presented, and existing sources are described. The basic physical principles of laser-driven neutron production and the current state-of-the-art of production techniques are outlined. The potential developments and the role of such sources in the landscape of neutron sources in the future are critically commented on.
- Open Access
Enhancing Neutron Measurement Accuracy with Bubble Detectors at Laser-Driven Neutron Sources
Bubble detectors are widely used to measure neutron flux from laser-driven sources employing a pitcher-catcher setup, due to their insensitivity to intense $γ$-ray backgrounds and strong electromagnetic pulses (EMP).\\ This paper presents a method to account for the neutron energy-dependent response of bubble detectors, enabling accurate conversion of bubble counts into neutron flux at the detector location. The proposed method is based on the accurate reconstruction of the response function using a surrogate model. The resulting model is convoluted with the (normalized) expected/measured neutron spectrum to obtain an effective measure of the bubble detector's response, herein referred to as effective $c$ or $c_\text{eff}$. This effective value for the response is energy-independent after the convolution. In this way, our approach includes the spectral distribution of neutrons arriving at the detector to determine the integral neutron flux. Analyzing our experimental results obtained at the DRACO PW laser and comparing the results to previously used methods to obtain neutron fluxes from bubble detectors returns a reduction in neutron flux of up to \SI{31}{\%}. Results from the method detailed in this paper agree with in-depth experimental setup Monte Carlo simulations, with deviations of less than \SI{10}{\%}. We furthermore discuss the inherent limitations of our method with regard to its uncertainty and highlight the influence of neutron scattering in bubble detector measurements. For our experimental setup at the DRACO laser, up to \SI{47}{\%} of the detected neutrons arrive at the detector after undergoing at least one scattering event.Open AccessEnhancing Neutron Measurement Accuracy with Bubble Detectors at Laser-Driven Neutron Sources
Bubble detectors are widely used to measure neutron flux from laser-driven sources employing a pitcher-catcher setup, due to their insensitivity to intense $γ$-ray backgrounds and strong electromagnetic pulses (EMP).\\ This paper presents a method to account for the neutron energy-dependent response of bubble detectors, enabling accurate conversion of bubble counts into neutron flux at the detector location. The proposed method is based on the accurate reconstruction of the response function using a surrogate model. The resulting model is convoluted with the (normalized) expected/measured neutron spectrum to obtain an effective measure of the bubble detector's response, herein referred to as effective $c$ or $c_\text{eff}$. This effective value for the response is energy-independent after the convolution. In this way, our approach includes the spectral distribution of neutrons arriving at the detector to determine the integral neutron flux. Analyzing our experimental results obtained at the DRACO PW laser and comparing the results to previously used methods to obtain neutron fluxes from bubble detectors returns a reduction in neutron flux of up to \SI{31}{\%}. Results from the method detailed in this paper agree with in-depth experimental setup Monte Carlo simulations, with deviations of less than \SI{10}{\%}. We furthermore discuss the inherent limitations of our method with regard to its uncertainty and highlight the influence of neutron scattering in bubble detector measurements. For our experimental setup at the DRACO laser, up to \SI{47}{\%} of the detected neutrons arrive at the detector after undergoing at least one scattering event. - Open Access
- 13 August 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (8) , 1-16
Scaling of laboratory neutron sources based on laser wakefield-accelerated electrons using Monte Carlo simulations
Neutron sources based on laser-accelerated particles have attracted interest as they may provide a compact, cost-effective alternative to conventional sources. Recently, laser-driven neutron sources, based on ion acceleration, demonstrated neutron resonance spectroscopy, imaging and resonance imaging in first proof-of-principle experiments. To drive these sources efficiently with laser-accelerated ions, high laser pulse energies, in the range of tens to hundreds of Joules, with sub-ps pulse duration are needed. This requirement currently limits ion-based laser neutron sources to large-scale laser systems, which typically have maximum repetition rates in the order of a few shots per hour. In this paper, we investigate a potential path to circumvent these limitations by utilizing high repetition rate capable laser wakefield acceleration of electrons to drive a neutron source with high conversion efficiency. Monte Carlo simulations are performed to calculate neutron yields for various electron energies and converter materials, to determine optimal working parameters for an electron-based laser-driven neutron source. The results suggest that conversion efficiencies exceeding 25% can be achieved, depending on the electron energy and converter material. This electron-based approach could provide a neutron source with up to 10 $$^{11}$$ n/s with state-of-the-art laser sources ( $$E_{\text {Laser}} \lesssim {1}\,{\rm J}$$ , $$\tau _{\text {Laser}} \lesssim {50}\,{\rm fs}$$ , $$\sim {1}\,\textrm{kHz}$$ ).- 13 August 2024
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 139 (8) , 1-16
Open AccessScaling of laboratory neutron sources based on laser wakefield-accelerated electrons using Monte Carlo simulations
Neutron sources based on laser-accelerated particles have attracted interest as they may provide a compact, cost-effective alternative to conventional sources. Recently, laser-driven neutron sources, based on ion acceleration, demonstrated neutron resonance spectroscopy, imaging and resonance imaging in first proof-of-principle experiments. To drive these sources efficiently with laser-accelerated ions, high laser pulse energies, in the range of tens to hundreds of Joules, with sub-ps pulse duration are needed. This requirement currently limits ion-based laser neutron sources to large-scale laser systems, which typically have maximum repetition rates in the order of a few shots per hour. In this paper, we investigate a potential path to circumvent these limitations by utilizing high repetition rate capable laser wakefield acceleration of electrons to drive a neutron source with high conversion efficiency. Monte Carlo simulations are performed to calculate neutron yields for various electron energies and converter materials, to determine optimal working parameters for an electron-based laser-driven neutron source. The results suggest that conversion efficiencies exceeding 25% can be achieved, depending on the electron energy and converter material. This electron-based approach could provide a neutron source with up to 10 $$^{11}$$ n/s with state-of-the-art laser sources ( $$E_{\text {Laser}} \lesssim {1}\,{\rm J}$$ , $$\tau _{\text {Laser}} \lesssim {50}\,{\rm fs}$$ , $$\sim {1}\,\textrm{kHz}$$ ). - Open Access
- 31 March 2024
- Published by MDPI AG in Journal of Nuclear Engineering
- Vol. 5 (2) , 114-127
Neutron Yield Predictions with Artificial Neural Networks: A Predictive Modeling Approach
The development of compact neutron sources for applications is extensive and features many approaches. For ion-based approaches, several projects with different parameters exist. This article focuses on ion-based neutron production below the spallation barrier for proton and deuteron beams with arbitrary energy distributions with kinetic energies from 3 to 97 . This model makes it possible to compare different ion-based neutron source concepts against each other quickly. This contribution derives a predictive model using Monte Carlo simulations (an order of 50,000 simulations) and deep neural networks. It is the first time a model of this kind has been developed. With this model, lengthy Monte Carlo simulations, which individually take a long time to complete, can be circumvented. A prediction of neutron spectra then takes some milliseconds, which enables fast optimization and comparison. The models’ shortcomings for low-energy neutrons (<) and the cut-off prediction uncertainty () are addressed, and mitigation strategies are proposed.- 31 March 2024
- Published by MDPI AG in Journal of Nuclear Engineering
- Vol. 5 (2) , 114-127
Open AccessNeutron Yield Predictions with Artificial Neural Networks: A Predictive Modeling Approach
The development of compact neutron sources for applications is extensive and features many approaches. For ion-based approaches, several projects with different parameters exist. This article focuses on ion-based neutron production below the spallation barrier for proton and deuteron beams with arbitrary energy distributions with kinetic energies from 3 to 97 . This model makes it possible to compare different ion-based neutron source concepts against each other quickly. This contribution derives a predictive model using Monte Carlo simulations (an order of 50,000 simulations) and deep neural networks. It is the first time a model of this kind has been developed. With this model, lengthy Monte Carlo simulations, which individually take a long time to complete, can be circumvented. A prediction of neutron spectra then takes some milliseconds, which enables fast optimization and comparison. The models’ shortcomings for low-energy neutrons (<) and the cut-off prediction uncertainty () are addressed, and mitigation strategies are proposed. - Open Access
- 4 March 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-11
Demonstration of non-destructive and isotope-sensitive material analysis using a short-pulsed laser-driven epi-thermal neutron source
Neutrons are a valuable tool for non-destructive material investigation as their interaction cross sections with matter are isotope sensitive and can be used complementary to x-rays. So far, most neutron applications have been limited to large-scale facilities such as nuclear research reactors, spallation sources, and accelerator-driven neutron sources. Here we show the design and optimization of a laser-driven neutron source in the epi-thermal and thermal energy range, which is used for non-invasive material analysis. Neutron resonance spectroscopy, neutron radiography, and neutron resonance imaging with moderated neutrons are demonstrated for investigating samples in terms of isotope composition and thickness. The experimental results encourage applications in non-destructive and isotope-sensitive material analysis and pave the way for compact laser-driven neutron sources with high application potential.
- 4 March 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-11
Open AccessDemonstration of non-destructive and isotope-sensitive material analysis using a short-pulsed laser-driven epi-thermal neutron source
Neutrons are a valuable tool for non-destructive material investigation as their interaction cross sections with matter are isotope sensitive and can be used complementary to x-rays. So far, most neutron applications have been limited to large-scale facilities such as nuclear research reactors, spallation sources, and accelerator-driven neutron sources. Here we show the design and optimization of a laser-driven neutron source in the epi-thermal and thermal energy range, which is used for non-invasive material analysis. Neutron resonance spectroscopy, neutron radiography, and neutron resonance imaging with moderated neutrons are demonstrated for investigating samples in terms of isotope composition and thickness. The experimental results encourage applications in non-destructive and isotope-sensitive material analysis and pave the way for compact laser-driven neutron sources with high application potential.
- 25 October 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 104 (4) , 045210
Analysis of laser-proton acceleration experiments for development of empirical scaling laws
Numerous experiments on laser-driven proton acceleration in the MeV range have been performed with a large variety of laser parameters since its discovery around the year 2000. Both experiments and simulations have revealed that protons are accelerated up to a maximum cut-off energy during this process. Several attempts have been made to find a universal model for laser proton acceleration in the target normal sheath acceleration regime. While these models can qualitatively explain most experimental findings, they can hardly be used as predictive models, for example, for the energy cut-off of accelerated protons, as many of the underlying parameters are often unknown. Here we analyze experiments on laser proton acceleration in which scans of laser and target parameters were performed. We derive empirical scaling laws from these parameter scans and combine them in a scaling law for the proton energy cut-off that incorporates the laser pulse energy, the laser pulse duration, the focal spot radius, and the target thickness. Using these scaling laws, we give examples for predicting the proton energy cut-off and conversion efficiency for state-of-the-art laser systems.
- 25 October 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 104 (4) , 045210
Analysis of laser-proton acceleration experiments for development of empirical scaling laws
Numerous experiments on laser-driven proton acceleration in the MeV range have been performed with a large variety of laser parameters since its discovery around the year 2000. Both experiments and simulations have revealed that protons are accelerated up to a maximum cut-off energy during this process. Several attempts have been made to find a universal model for laser proton acceleration in the target normal sheath acceleration regime. While these models can qualitatively explain most experimental findings, they can hardly be used as predictive models, for example, for the energy cut-off of accelerated protons, as many of the underlying parameters are often unknown. Here we analyze experiments on laser proton acceleration in which scans of laser and target parameters were performed. We derive empirical scaling laws from these parameter scans and combine them in a scaling law for the proton energy cut-off that incorporates the laser pulse energy, the laser pulse duration, the focal spot radius, and the target thickness. Using these scaling laws, we give examples for predicting the proton energy cut-off and conversion efficiency for state-of-the-art laser systems.
- 1 September 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (9) , 093302
Spatially resolved online particle detector using scintillators for laser-driven particle sources
Laser-based particle accelerators have been an active field of research for over two decades moving from laser systems capable of one shot every hour to systems able to deliver repetition rates in the Hz regime. Based on the advancements in laser technology, the corresponding detection methods need to develop from single to multiple use with high readout speed. Here, we present an online compact tracker of particles using scintillators with nine resolvable energy levels and a spatial resolution of 3.6 × 3.6 mm2 over the whole active area. This paper describes the design and construction of the detector, which is based on pixellated scintillators embedded inside an absorber matrix. The scintillator pixels are fiberoptically coupled to a camera system for online readout and analysis. Calibration with a radioactive source and first experimental data measuring laser accelerated ions at the PHELIX laser at GSI, Darmstadt, Germany, are presented and discussed.
- 1 September 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (9) , 093302
Spatially resolved online particle detector using scintillators for laser-driven particle sources
Laser-based particle accelerators have been an active field of research for over two decades moving from laser systems capable of one shot every hour to systems able to deliver repetition rates in the Hz regime. Based on the advancements in laser technology, the corresponding detection methods need to develop from single to multiple use with high readout speed. Here, we present an online compact tracker of particles using scintillators with nine resolvable energy levels and a spatial resolution of 3.6 × 3.6 mm2 over the whole active area. This paper describes the design and construction of the detector, which is based on pixellated scintillators embedded inside an absorber matrix. The scintillator pixels are fiberoptically coupled to a camera system for online readout and analysis. Calibration with a radioactive source and first experimental data measuring laser accelerated ions at the PHELIX laser at GSI, Darmstadt, Germany, are presented and discussed.