Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kristina Yu. Sapozhnikova has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and Properties of Degradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] Derived from Waste Fish Oil

    by Tatiana G. Volova, Evgeniy G. Kiselev, Alexey G. Sukovatyi, Natalia O. Zhila, Kristina Yu. Sapozhnikova, Natalia D. Ipatova, Peter O. Shishatskii

    The article presents the results of the first successful synthesis of degradable microbial copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB-co-3HV)] by the wild-type strain C. necator B-10646 using waste fish oil (WFO) obtained from the heads of Sprattus sprattus balticus. Samples of copolymers with 3HV monomer contents from 11.9 to 59.7 mol.% were synthesized with fractional and controlled feeding of potassium valerate, a precursor of 3HV monomers, into the bacterial culture. Samples synthesized on WFO with different contents of 3HV monomers had a reduced degree of crystallinity (36.5% and below), and close average molecular weight (390–573 kDa), with polydispersity of 2.6–3.0, and retained thermal stability, with a gap between the melting point and the thermal degradation temperature of over 100 °C. The thermal behavior of the samples, including the kinetics of exothermic crystallization and spherulite formation, was studied. Demonstrating the possibility of using WFO for the effective synthesis of P(3HB-co-3HV) with macroinclusions of 3HV monomers without deterioration of their properties is important for expanding the raw material base, reducing costs and increasing the availability of these promising bioplastics.


  • Open Access

    Effect of surfactants and polymer composition on the characteristics of polyhydroxyalkanoate nanoparticles

    by Aleksei Dorokhin, Sergei Lipaikin, Galina Ryltseva, Alexander Shabanov, Kristina Sapozhnikova, Tatiana Volova, Sergei Kachin, Ekaterina Shishatskaya

    Background and purpose: Polyhydroxyalkanoates (PHAs) are biodegradable polyesters of bacterial origin that are actively studied as matrices for the preparation of nanoparticulate drug delivery systems. The most significant parameters affecting PHAs nanoparticles (NPs) characteristics are polymer composition and the type of surfactant used to stabilize the emulsion during NPs preparation. However, there are only a few studies in the literature investigating the effect of these factors on the characteristics of PHA NPs. Experimental approach: Blank poly(3-hydroxybutyrate) (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxy­valerate) (P3HBV) NPs were produced and characterized in terms of their size, morphology and zeta potential. Poly(vinyl alcohol) (PVA) with various molecular weights (31-50 and 85-124 kDa), as well as Tween 20 (TW20), Tween 80 (TW80), sodium deoxycholate (SDC) and sodium dodecyl sulphate (SDS) were used as surfactants. For NPs that formed stable aqueous suspensions and had the most desirable characteristics (P3HB/PVA31-50 and P3HBV/PVA31-50), hemolytic activity and cytotoxicity to HeLa and C2C12 cells in vitro were determined. Key results: NPs of both P3HB and P3HBV obtained using PVA with the Mw of 31-50 kDa as a surfactant had regular spherical shape, uniform size distribution, average diameter of about 900 nm and zeta potential of -28.5 and -28.7 mV, respectively. PVA85-124, TW20 and TW80, as well as SDC and SDS as surfactants, did not show satisfactory results due to suspension gelation, formation of hollow NPs with irregular shape and poor resuspension after washing and freeze-drying, respectively. P3HB/PVA31-50 and P3HBV/PVA31-50 NPs did not have hemolytic activity and did not show pronounced cytotoxicity to HeLa and C2C12 cells in the concentration range from 10 to 500 μg mL-1, so these samples were regarded as safe and biocompatible. Conclusion: In this study, the effect of various non-ionic and anionic surfactants on the characteristics of P3HB and P3HBV NPs was investigated. PVA31-50 was found to be effective in producing NPs of both studied polymers with good biocompatibility and favorable characteristics, making them suitable for drug delivery applications. In contrast, other studied surfactants, i.e., PVA85-124, TW20, TW80, SDC and SDS, require further investigation. The obtained findings may promote the development of novel PHA-based nanomedicines.


  • Open Access

    Biosynthesis of Polyhydroxyalkanoates in Cupriavidus necator B-10646 on Saturated Fatty Acids

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Evgeniy G. Kiselev, Ekaterina I. Shishatskaya, Tatiana G. Volova

    It has been established that the wild-type Cupriavidus necator B-10646 strain uses saturated fatty acids (SFAs) for growth and polyhydroxyalkanoate (PHA) synthesis. It uses lauric (12:0), myristic (14:0), palmitic (16:0) and stearic (18:0) acids as carbon sources; moreover, the elongation of the C-chain negatively affects the biomass and PHA yields. When bacteria grow on C12 and C14 fatty acids, the total biomass and PHA yields are comparable up to 7.5 g/L and 75%, respectively, which twice exceed the values that occur on longer C16 and C18 acids. Regardless of the type of SFAs, bacteria synthesize poly(3-hydroxybutyrate), which have a reduced crystallinity (Cx from 40 to 57%) and a molecular weight typical for poly(3-hydroxybutyrate) (P(3HB)) (Mw from 289 to 465 kDa), and obtained polymer samples demonstrate melting and degradation temperatures with a gap of about 100 °C. The ability of bacteria to assimilate SFAs opens up the possibility of attracting the synthesis of PHAs on complex fat-containing substrates, including waste.


  • Open Access

    Properties of Degradable Polyhydroxyalkanoates Synthesized from New Waste Fish Oils (WFOs)

    by Natalia O. Zhila, Evgeniy G. Kiselev, Vladimir V. Volkov, Olga Ya. Mezenova, Kristina Yu. Sapozhnikova, Ekaterina I. Shishatskaya, Tatiana G. Volova

    The synthesis of PHA was first investigated using WFOs obtained from smoked-sprat heads, substandard fresh sprats, and fresh mackerel heads and backbones. All the WFOs ensured the growth of the wild-type strain Cupriavidus necator B-10646 and the synthesis of PHA, regardless of the degree of lipid saturation (from 0.52 to 0.65) and the set and ratio of fatty acids (FA), which was represented by acids with chain lengths from C14 to C24. The bacterial biomass concentration and PHA synthesis were comparable (4.1–4.6 g/L and about 70%) when using WFO obtained from smoked-sprat heads and fresh mackerel, and it was twice as high as the bacterial biomass concentration from the fresh sprat waste. This depended on the type of WFO, the bacteria synthesized P(3HB) homopolymer or P(3HB-co-3HV-co-3HHx) copolymer, which had a lower degree of crystallinity (Cx 71%) and a lower molecular weight (Mn 134 kDa) compared to the P(3HB) (Mn 175–209 kDa and Cx 74–78%) at comparable temperatures (Tmelt and Tdegr of 158–168 °C and 261–284 °C, respectively). The new types of WFO, studied for the first time, are suitable as a carbon substrates for PHA synthesis. The WFOs obtained in the production of canned Baltic sprat and Baltic mackerel can be considered a promising and renewable substrate for PHA biosynthesis.


  • Open Access

    Synthesis and Properties of Polyhydroxyalkanoates on Waste Fish Oil from the Production of Canned Sprats

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Evgeniy G. Kiselev, Ekaterina I. Shishatskaya, Tatiana G. Volova

    The waste fish oil obtained from Baltic sprat waste in the production of canned sprats was studied as a sole carbon substrate for PHA synthesis by the wild-type strain Cupriavidus necator B-10646. Sprat oil contained a set of fatty acids with a chain length from C14 to C24, saturation factor 0.63, and provided bacterial growth and PHA synthesis. Bacteria metabolized fatty acids unevenly utilizing polyenoic acids and not using monoenoic and saturated acids. The bacterial biomass yield and the intracellular polymer concentration were 6.5 ± 0.5 g/L and 65 ± 5% by fed-batch culture in flasks. The synthesized PHAs were three-component copolymers with a predominance (97–98 mol.%) of 3-hydroxybutyrate monomers and small inclusions of 3-hydroxyvalerate and 3-hydroxyhexanoate; the ratio of monomers changed slightly depending on the sprat oil concentration. The series of samples had a temperature (Tmelt) of 158–165 °C, a molecular weight (Mw) of 540–760 kDa, and a degree of crystallinity (Cx) of 66–72%. For the first time, the waste fish oil from the production of sprats studied as a carbon substrate is a promising, affordable, and renewable substrate for PHA biosynthesis.


  • Open Access

    Biosynthesis of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) from Different 4-Hydroxybutyrate Precursors by New Wild-Type Strain Cupriavidus necator IBP/SFU-1

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Evgeniy G. Kiselev, Ekaterina I. Shishatskaya, Tatiana G. Volova

    The study addresses the growth of the new wild-type strain Cupriavidus necator IBP/SFU-1 and the synthesis of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB) on media containing fructose and three different precursors of 4HB (ε-caprolactone 1,4-butanediol and 1,6-hexanediol). It was found that ε-caprolactone is the best precursor for the synthesis of P(3HB-co-4HB) copolymers. By varying the concentration and number of doses of ε-caprolactone added into the bacterial culture, it was possible to find conditions that ensured the synthesis of P(3HB-co-4HB) copolymers with different contents of 4HB (from 3–5 to 22.4 mol.%). The physicochemical properties of the copolymers were investigated depending on the proportions of 4HB monomers. The effect of 4HB monomers was manifested in a certain decrease in the weight-average molecular weight (Mw) (272–353 kDa), number-average molecular weight (Mn) (47–67 kDa) of the samples, and an increase in polydispersity (5.09–6.71) compared with P(3HB). The crystallinity degree decreased with an increasing fraction of the 4HB units (from 72 to 59%, as the 4HB content increased from 0 to 22.4 mol.%). In addition, the increase in 4HB content affected the temperature parameters (melting point, glass transition temperature, crystallization temperature, and thermal degradation temperature).


  • Open Access

    Biosynthesis and Properties of Sulfur-Containing Polyhydroxyalkanoates (PHAs) Produced by Wild-Type Strain Cupriavidus necator B-10646

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Arina V. Berezovskaya, Evgeniy G. Kiselev, Ekaterina I. Shishatskaya, Aleksander D. Vasiliev, Sabu Thomas, Tatiana G. Volova

    The study addresses the growth of the wild-type strain Cupriavidus necator B-10646 and the synthesis of sulfur-containing polyhydroxyalkanoates (PHA) by this strain on media containing fructose and three different precursors (3-mercaptopropionic acid, 3′,3′-dithiodipropionic acid and 3′,3′-thiodipropionic acid). By varying the concentration and number of doses of the precursors added into the bacterial culture, it was possible to find conditions that ensure the formation of 3-mercaptopropionate (3MP) monomers from the precursors and their incorporation into the C-chain of poly(3-hydroxybutyrate). A series of P(3HB-co-3MP) copolymer samples with different content of 3MP monomers (from 2.04 to 39.0 mol.%) were synthesized and the physicochemical properties were studied. The effect of 3MP monomers is manifested in a certain decrease in the molecular weight of the samples and an increase in polydispersity. Temperature changes are manifested in the appearance of two peaks in the melting region with different intervals regardless of the 3MP content. The studied P(3HB-co-3MP) samples, regardless of the content of 3MP monomers, are characterized by equalization of the ratio of the amorphous and crystalline phases and have a close degree of crystallinity with a minimum of 42%, = and a maximum of 54%.


  • Open Access

    Biosynthesis and Properties of a P(3HB-co-3HV-co-4HV) Produced by Cupriavidus necator B-10646

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Evgeniy G. Kiselev, Ivan V. Nemtsev, Anna V. Lukyanenko, Ekaterina I. Shishatskaya, Tatiana G. Volova

    Synthesis of P(3HB-co-3HV-co-4HV) copolymers by the wild-type strain Cupriavidus necator B-10646 on fructose or sodium butyrate as the main C-substrate with the addition of γ-valerolactone as a precursor of 3HV and 4HV monomers was studied. Bacterial cells were cultivated in the modes that enabled production of a series of copolymers with molar fractions of 3HV (from 7.3 to 23.4 mol.%) and 4HV (from 1.9 to 4.7 mol.%) with bacterial biomass concentration (8.2 ± 0.2 g/L) and PHA content (80 ± 2%). Using HPLC, DTA, DSC, X-Ray, SEM, and AFM, the physicochemical properties of copolymers and films prepared from them have been investigated as dependent on proportions of monomers. Copolymers are characterized by a reduced degree of crystallinity (Cx 38–49%) molecular weight characteristics Mn (45–87 kDa), and Mw (201–248 kDa) compared with P(3HB). The properties of the films surface of various composition including the porosity and surface roughness were studied. Most of the samples showed a decrease in the average pore area and an increase in their number with a total increase in 3HV and 4HV monomers. The results allow scaling up the productive synthesis of P(3HB-co-3HV-co-4HV) copolymers using Cupriavidus necator B-10646.


  • Open Access

    Properties of Degradable Polyhydroxyalkanoates (PHAs) Synthesized by a New Strain, Cupriavidus necator IBP/SFU-1, from Various Carbon Sources

    by Natalia O. Zhila, Kristina Yu. Sapozhnikova, Evgeniy G. Kiselev, Alexander D. Vasiliev, Ivan V. Nemtsev, Ekaterina I. Shishatskaya, Tatiana G. Volova

    The bacterial strain isolated from soil was identified as Cupriavidus necator IBP/SFU-1 and investigated as a PHA producer. The strain was found to be able to grow and synthesize PHAs under autotrophic conditions and showed a broad organotrophic potential towards different carbon sources: sugars, glycerol, fatty acids, and plant oils. The highest cell concentrations (7–8 g/L) and PHA contents were produced from oleic acid (78%), fructose, glucose, and palm oil (over 80%). The type of the carbon source influenced the PHA chemical composition and properties: when grown on oleic acid, the strain synthesized the P(3HB-co-3HV) copolymer; on plant oils, the P(3HB-co-3HV-co-3HHx) terpolymer, and on the other substrates, the P(3HB) homopolymer. The type of the carbon source influenced molecular-weight properties of PHAs: P(3HB) synthesized under autotrophic growth conditions, from CO2, had the highest number-average (290 ± 15 kDa) and weight-average (850 ± 25 kDa) molecular weights and the lowest polydispersity (2.9 ± 0.2); polymers synthesized from organic carbon sources showed increased polydispersity and reduced molecular weight. The carbon source was not found to affect the degree of crystallinity and thermal properties of the PHAs. The type of the carbon source determined not only PHA composition and molecular weight but also surface microstructure and porosity of the polymer films. The new strain can be recommended as a promising P(3HB) producer from palm oil, oleic acid, and sugars (fructose and glucose) and as a producer of P(3HB-co-3HV) from oleic acid and P(3HB-co-3HV-co-3HHx) from palm oil.