JBJoonho Baek

Joonho Baek

*This is an algorithmically generated author record based on publicly available information.

Joonho Baek has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Feasibility Study on the Use of Injection Molding Systems for Mass Production of 100W Class Wind Turbine Blades

    by Joongseon Kim, Upendra Tuladhar, Deokkeun Je, Marinus Mieremet, Joonho Baek, Hoseong Ji, Seokyoung Ahn

    A feasibility study on the mass production of a small wind turbine blade using an injection molding process was conducted. The blade was divided into three sections suitable for injection molding, and the mold was designed and analyzed using Moldflow CAE S/W. The optimal feedstock material was selected through comparison and analysis of three candidate materials. A mold was manufactured to test the injection molding process and evaluate related parameters. The resulting blade was assembled with other components, and a generator was installed to assess its durability, safety, and performance under various conditions. The results indicated the feasibility of producing a blade for a small wind turbine through injection molding, which predicted higher productivity and lower costs compared to traditional manufacturing methods that rely heavily on manual labor.


  • Open Access

    Parametric Study of Eddy Current Brakes for Small-Scale Household Wind Turbine Systems

    by Huiseop Jeong, Hoseong Ji, Sanghyun Choi, Joonho Baek

    The design and application of eddy current brakes (ECBs) should be simple; further, ECBs should be used semi-permanently. This study aimed to determine major parameters for designing an ECB that can be applied to a small-scale wind turbine generator. To this end, an ECB was developed that could actuate without additional power, thus improving the efficiency of the generator. A series of simulations were conducted for a parametric study to pre-design ECBs suitable for small wind turbines. The six parameters chosen were disk thickness, number of magnets, radial location of magnets from center of disk, magnet pole arrangement, magnetic flux density, and rotational speed. The simulations were conducted on COMSOL Multiphysics. The results indicated that the number of magnets and magnet pole arrangements can significantly affect the performance curve of ECBs. Moreover, the disk thickness and rotational speed are linearly proportional to the braking torque.


  • Open Access

    Development of a Slit-Type Soundproof Panel for a Reduction in Wind Load and Low-Frequency Noise with Helmholtz Resonators

    by Byunghui Kim, Seokho Kim, Yejin Park, Marinus Mieremet, Heungguen Yang, Joonho Baek, Sanghyun Choi

    With the rapid increase in automobiles, the importance of reducing low-frequency noise is being emphasized for a comfortable urban environment. Helmholtz resonators are widely used to attenuate low-frequency noise over a narrow range. In this study, a slit-type soundproof panel is designed to achieve low-frequency noise attenuation in the range of 500 Hz to 1000 Hz with the characteristics of a Helmholtz resonator and the ability to pass air through the slits on the panel surface for reducing wind load. The basic dimension of the soundproof panel is determined using the classical formula and numerical analysis using a commercial program, COMSOL Multiphysics, for transmission loss prediction. From the numerical study, it is identified that the transmission loss performance is improved compared to the basic design according to the shape change and configuration method of the Helmholtz resonator. Although the correlation according to the shape change and configuration method cannot be derived, it is confirmed that it can be used as an effective method for deriving a soundproof panel design that satisfies the basic performance.