RLRita Lorenzini

Rita Lorenzini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rita Lorenzini has a total of 312 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    RFX-MOD2 AND THE NEFERTARI PROJECT - A distributed research network for the study of magnetically confined plasmas for fusion

    by Lionello Marrelli, Marco Barbisan, Paolo Bettini, Matteo Brombin, Lorella Carraro, Olga De Pascale, Giorgio Dilecce, Luca Grando, Nicolo Marconato, Simone Peruzzo, et al.

    This paper describes the status of the implementation of the upgrades for the RFX-mod2 device, the second major modification of the Reversed Field eXperiment (RFX). The machine's core update consists of a thin copper stabilizing shell placed inside the vacuum vessel to ensure long-term stability of Resistive Wall Modes (RWM) and enable regimes with fast-rotating tearing modes. A comprehensive modernization of the facility’s technological plants and diagnostics is being carried out within the NEFERTARI project (New Equipment For the Experimental Research and Technological Advancement for the RFX Infrastructure). Funded by the Italian National Recovery and Resilience Plan (NRRP) under Next Generation EU, NEFERTARI aims to strengthen the RFX infrastructure and its network of partners. Significant plant upgrades include: the refurbishment of the main vacuum system and the development of a new Glow Discharge Cleaning (GDC) system based on eight fixed electrodes for more uniform wall conditioning; a major overhaul of the Control and Data Acquisition System, now featuring a high-resolution multichannel acquisition system with over 1500 channels that eliminates the need for analog integrators; the enhancement edge plasma characterization and of core diagnostics, such as the high-repetition-rate (up to 3 kHz) Thomson Scattering system and the expanded Soft X-ray (SXR) tomography; the upgrade of the existing and installation of new reflectometric system; the restoration of the Diagnostic Neutral Beam Injector (DNBI) for spatially resolved ion temperature measurements. Furthermore, the paper highlights the contributions of the Italian laboratory network, including the BiGyM infrastructure for testing innovative plasma-facing components; the ROMAN remote handling facility for in-vessel maintenance development; dedicated laboratories for the development of neutron detectors and for optical diagnostics for the characterization of surfaces, and for high-voltage electrical insulation testing.


  • Open Access

    TRANSP-TGLF core predictive modelling of the JET DT baseline scenario

    by Fulvio Auriemma, Hyun-Tae Kim, Jacopo Lombardo, Rita Lorenzini, Stefano Gabriellini, Luca Garzotti, Vito Konrad Zotta, Domenico Frigione, Sheena Menmuir, Marina Gorelenkova, et al.

    In recent years, an intense modeling activity has been focused on preparing and analyzing the second JET Deuterium-Tritium (D-T) experimental campaign DTE2. Among the numerous scientific outcomes of this campaign was the unique opportunity to test and validate the state of the art of modeling tools with fusion-relevant DT plasmas using the full metallic ITER-like wall in different scenarios. This work reports on the core predictive modeling of plasma density, electron, and ion temperatures (ne, Te, Ti) performed using TRANSP [1] coupled with TGLF- SAT2[2, 3] for the JET D-T baseline scenario (Ip = 3.5MA, q95 = 3, βN < 2, with pellet pacing)[4]. The sensitivity to different input parameters, as the E×B shear parameterization and the values of the kinetic quantities at the boundary of the prediction domain (ρ = 0.85) has been assessed, identifying the confidence interval of the prediction results. In particular, the dependence of the electron density profile on the particle source parameters has been studied, identifying the ionization source as the main cause for the density gradient underprediction obtained by TRANSP-TGLF, reported in [5]


  • Open Access

    Reconstruction of the fast-ion deuterium distribution in a tritium-rich plasma in the JET DTE2 campaign

    by H. Järleblad, B.C.G. Reman, Y. Dong, M. Nocente, J. Eriksson, A. Valentini, M. Rud, A. Dal Molin, J. Garcia, Ye.O. Kazakov, et al.

    An important step on the way to future fusion power plants was the 2021 deuterium–tritium experimental campaign (DTE2) at the Joint European Torus (JET), in which crucial DT physics was investigated. In this study, we have reconstructed the fast-ion deuterium distribution function in JET discharge 99971 which broke the former fusion energy record. It is the first time that the fast-ion distribution has been reconstructed from experimental data in a DT discharge. The reconstruction shows that the fast-ion deuterium distribution is anisotropic, with a bias towards co-going ions (p > 0). The fast-ion deuterium distribution likely peaks in energy (E) at around E ∼ 60 –70 keV and has a marginal high-energy tail ( E ≳ 180 keV). Furthermore, an orbit analysis shows that the fast-ion distribution is composed of mostly co-passing orbits ( 50 % ), trapped orbits ( 21 % ) and counter-passing orbits ( 27 % ), as well as a small population of potato orbits ( 1.7 % ) and counter-stagnation orbits ( 0.3 % ). The orbit-type constituents of the neutron measurements are distributed in similar fractions.


  • Open Access

    RFX-mod2 as a flexible device for reversed-field-pinch and low-field tokamak research

    by D. Terranova, M. Agostini, F. Auriemma, M. Gobbin, G. Marchiori, L. Pigatto, P. Porcu, I. Predebon, G. Spizzo, N. Vianello, et al.

    The RFX-mod2 installation is planned to be completed by 2024 and the start of operations is expected in 2025. The high flexibility of the machine (already tested in the previous RFX-mod experiment) allows operation in Reversed Field Pinch and tokamak configuration as well as ultra-low q pulses. In this work we present predictive analysis on transport, performances and plasma control in RFX-mod2 in view of the first experimental campaigns.


  • Open Access

    Overview of interpretive modelling of fusion performance in JET DTE2 discharges with TRANSP

    by Ž. Štancar, K.K. Kirov, F. Auriemma, H.-T. Kim, M. Poradziński, R. Sharma, R. Lorenzini, Z. Ghani, M. Gorelenkova, F. Poli, et al.

    In the paper we present an overview of interpretive modelling of a database of JET-ILW 2021 D-T discharges using the TRANSP code. The main aim is to assess our capability of computationally reproducing the fusion performance of various D-T plasma scenarios using different external heating and D-T mixtures, and to understand the performance driving mechanisms. We find that interpretive simulations confirm a general power-law relationship between increasing external heating power and fusion output, which is supported by absolutely calibrated neutron yield measurements. A comparison of measured and computed D-T neutron rates shows that the calculations’ discrepancy depends on the absolute neutron yield. The calculations are found to agree well with measurements for higher performing discharges with external heating power above ∼20 M W , while low-neutron shots display an average discrepancy of around +40% compared to measured neutron yields. A similar trend is found for the ratio between thermal and beam-target fusion, where larger discrepancies are seen in shots with dominant beam-driven performance. We compare the observations to studies of JET-ILW D discharges, to find that on average the fusion performance is well modelled over a range of heating power, although an increased unsystematic deviation for lower-performing shots is observed. The ratio between thermal and beam-induced D-T fusion is found to be increasing weakly with growing external heating power, with a maximum value of ≳ 1 achieved in a baseline scenario experiment. An evaluation of the fusion power computational uncertainty shows a strong dependence on the plasma scenario type and fusion drive characteristics, varying between ±25% and 35%. D-T fusion alpha simulations show that the ratio between volume-integrated electron and ion heating from alphas is ≲ 10 for the majority of analysed discharges. Alphas are computed to contribute between ∼15% and 40% to the total electron heating in the core of highest performing D-T discharges. An alternative workflow to TRANSP was employed to model JET D-T plasmas with the highest fusion yield and dominant non-thermal fusion component because of the use of fundamental radio-frequency heating of a large minority in the scenario, which is calculated to have provided ∼10% to the total fusion power.


  • Open Access

    Validation of D–T fusion power prediction capability against 2021 JET D–T experiments

    by Hyun-Tae Kim, Fulvio Auriemma, Jorge Ferreira, Stefano Gabriellini, Aaron Ho, Philippe Huynh, Krassimir Kirov, Rita Lorenzini, Michele Marin, Michal Poradzinski, et al.

    JET experiments using the fuel mixture envisaged for fusion power plants, deuterium and tritium (D–T), provide a unique opportunity to validate existing D–T fusion power prediction capabilities in support of future device design and operation preparation. The 2021 JET D–T experimental campaign has achieved D–T fusion powers sustained over 5 s in ITER-relevant conditions i.e. operation with the baseline or hybrid scenario in the full metallic wall. In preparation of the 2021 JET D–T experimental campaign, extensive D–T predictive modelling was carried out with several assumptions based on D discharges. To improve the validity of ITER D–T predictive modelling in the future, it is important to use the input data measured from 2021 JET D–T discharges in the present core predictive modelling, and to specify the accuracy of the D–T fusion power prediction in comparison with the experiments. This paper reports on the validation of the core integrated modelling with TRANSP, JINTRAC, and ETS coupled with a quasilinear turbulent transport model (Trapped Gyro Landau Fluid or QualLiKiz) against the measured data in 2021 JET D–T discharges. Detailed simulation settings and the heating and transport models used are described. The D–T fusion power calculated with the interpretive TRANSP runs for 38 D–T discharges (12 baseline and 26 hybrid discharges) reproduced the measured values within 20 % . This indicates the additional uncertainties, that could result from the measurement error bars in kinetic profiles, impurity contents and neutron rates, and also from the beam-thermal fusion reaction modelling, are less than 20% in total. The good statistical agreement confirms that we have the capability to accurately calculate the D–T fusion power if correct kinetic profiles are predicted, and indicates that any larger deviation of the D–T fusion power prediction from the measured fusion power could be attributed to the deviation of the predicted kinetic profiles from the measured kinetic profiles in these plasma scenarios. Without any posterior adjustment of the simulation settings, the ratio of predicted D–T fusion power to the measured fusion power was found as 65%–96% for the D–T baseline and 81%–97% for D–T hybrid discharge. Possible reasons for the lower D–T prediction are discussed and future works to improve the fusion power prediction capability are suggested. The D–T predictive modelling results have also been compared to the predictive modelling of the counterpart D discharges, where the key engineering parameters are similar. Features in the predicted kinetic profiles of D–T discharges such as underprediction ofneare also found in the prediction results of the counterpart D discharges, and it leads to similar levels of the normalized neutron rate prediction between the modelling results of D–T and the counterpart D discharges. This implies that the credibility of D–T fusion power prediction could bea prioriestimated by the prediction quality of the preparatory D discharges, which will be attempted before actual D–T experiments.


  • Open Access

    Isotope physics of heat and particle transport with tritium in JET-ILW type-I ELMy H-mode plasmas

    by P.A. Schneider, C. Angioni, F. Auriemma, N. Bonanomi, T. Görler, R. Henriques, L. Horvath, D. King, R. Lorenzini, H. Nyström, et al.

    As part the DTE2 campaign in the JET tokamak, we conducted a parameter scan in T and D-T complementing existing pulses in H and D. For the different main ion masses, type-I ELMy H-modes at fixed plasma current and magnetic field can have the pedestal pressure varying by a factor of 4 and the total pressure changing from β N = 1.0 to 3.0. We investigated the pedestal and core isotope mass dependencies using this extensive data set. The pedestal shows a strong mass dependence on the density, which influences the core due to the strong coupling between both plasma regions. To better understand the causes for the observed isotope mass dependence in the pedestal, we analysed the interplay between heat and particle transport and the edge localised mode (ELM) stability. For this purpose, we developed a dynamic ELM cycle model with basic transport assumptions and a realistic neutral penetration. The temporal evolution and resulting ELM frequency introduce an additional experimental constraint that conventional quasi-stationary transport analysis cannot provide. Our model shows that a mass dependence in the ELM stability or in the transport alone cannot explain the observations. One requires a mass dependence in the ELM stability as well as one in the particle sources. The core confinement time increases with pedestal pressure for all isotope masses due to profile stiffness and electromagnetic turbulence stabilisation. Interestingly, T and D-T plasmas show an improved core confinement time compared to H and D plasmas even for matched pedestal pressures. For T, this improvement is largely due to the unique pedestal composition of higher densities and lower temperatures than H and D. With a reduced gyroBohm factor at lower temperatures, more turbulent drive in the form of steeper gradients is required to transport the same amount of heat. This picture is supported by quasilinear flux-driven modelling using TGLF-SAT2 within Astra. With the experimental boundary condition TGLF-SAT2 predicts the core profiles well for gyroBohm heat fluxes > 15 , however, overestimates the heat and particle transport closer to the turbulent threshold.


  • Top Cited Papers
    Open Access

    JET D-T scenario with optimized non-thermal fusion

    by M. Maslov, E. Lerche, F. Auriemma, E. Belli, C. Bourdelle, C.D. Challis, A. Chomiczewska, A. Dal Molin, J. Eriksson, J. Garcia, et al.

    In JET deuterium-tritium (D-T) plasmas, the fusion power is produced through thermonuclear reactions and reactions between thermal ions and fast particles generated by neutral beam injection (NBI) heating or accelerated by electromagnetic wave heating in the ion cyclotron range of frequencies (ICRFs). To complement the experiments with 50/50 D/T mixtures maximizing thermonuclear reactivity, a scenario with dominant non-thermal reactivity has been developed and successfully demonstrated during the second JET deuterium-tritium campaign DTE2, as it was predicted to generate the highest fusion power in JET with a Be/W wall. It was performed in a 15/85 D/T mixture with pure D-NBI heating combined with ICRF heating at the fundamental deuterium resonance. In steady plasma conditions, a record 59 MJ of fusion energy has been achieved in a single pulse, of which 50.5 MJ were produced in a 5 s time window (Pfus= 10.1 MW) with averageQ= 0.33, confirming predictive modelling in preparation of the experiment. The highest fusion power in these experiments,Pfus= 12.5 MW with averageQ= 0.38, was achieved over a shorter 2 s time window, with the period of sustainment limited by high-Z impurity accumulation. This scenario provides unique data for the validation of physics-based models used to predict D-T fusion power.


  • The isotope effects in RFP magnetic configuration

    by Rita Lorenzini, Marco Gobbin, Rfx-Mod Team

    The comparison between deuterium and hydrogen plasmas at high current in the RFX-mod experiment proves that the reversed field pinch configuration experiences the isotope effect in a way analogous to tokamak experiments. Both energy and particle confinement exhibit a favourable scaling with the isotope mass M i , respectively, as M i 0.3 and as M i 0.45 . This effect is mainly due to the mitigation of transport at the edge, which is driven by electrostatic fluctuations, although a mitigation of the stochastic transport in the plasma core is also observed. As in tokamaks, the MHD properties are modified when the gas mass is changed. The most evident modification regards the spectrum of tearing modes that are more stable in deuterium, so that the duration and the purity of quasi single helicity (QSH) phases are enhanced. The thermal structures that develop during the QSH phases enclose a plasma volume that is wider in deuterium discharges than in hydrogen ones.


  • The isotope effect in the RFX-mod experiment

    by R. Lorenzini, M. Agostini, F. Auriemma, L. Carraro, G. De Masi, A. Fassina, P. Franz, M. Gobbin, P. Innocente, M.E. Puiatti, et al.